Latest cylinder pigtail Tenders | Government cylinder pigtail Tenders

Central Government/Public Sector

CTN :40447240

13 Jun, 2025 11.77 Lacs

Betul - Madhya Pradesh

Tender For supply of hydraulic hoses and end fittings as per dgms circular for underground mines - hose 1 by 4 in , hose 1 by 2 in , hose 3 by 8 in , hose 3 by 4 in , hose 1 in , end fitting 1 in , end fitting 1 by 4 in , end fitting 1 by 2 in , end fitting 3 by 8 in , end fitting 3 by 4 in

Central Government/Public Sector

CTN :40448914

13 Jun, 2025 NA

Sirsa - Haryana

Tender For repair and overhauling service - ground equipment;ground equipment; no; buyer premises-scope of work for servicing of ground equipment- regular servicing and preventing maintenance of ground equipment is essential to ensure the safety, efficiency, and reliablility of ground operations. gsse plays a critical role in supporting aircraft turnaround, maintenance, and logistics function. over time, continous use of equipment such as ladders, hydraulic rigs, trolleys, towing arms, and refilling systems can lead to mechanical wear, fluid degradadation, and unnoticed structural fatigue. faulty or poorly maintained gse poses a direct risk to personnel, aircraft, and ground assets. servicing ensures that all mechanical, hydraulic and structural components function safely and as intended. scope of work: 1. ladder frame to be inspected and weld joints for cracks for deformation and it is to be repaired. 2. anti-slip steps, handrails and safety locks to be inspected and to be rectified/changed. 3. caster wheels are to be checked for wear, lock function and lubrication and all the faulty parts are to be repaired/changed as per condition of the(f) equipment. 4. brake function and tow hitch mechanism is to be checked and to be repaired/changed as per condition of the equipment. 5. rust to be removed where required. 6. hoses and fittings are to be inspected for leaks and damages and thoses are to be repaired. 7. filters are to be changed if required. 8. cylinders are to be checked for cracks and are to be repaired. 9. structural integrity of frame and platform is to be checked and repaired as per requirement. 10. wheels are to be checked for alignment or any other bearing issues anfd same is to be repaired. 11. parking brake is to be checked along with the towbar assembly and is to be repaired as per requirement. 12. load securing hooks or rails are to be checked and to be made operational. 13. reservoir is to be checked for contamination and fuel level 14. hand/foot operations is to be checked and made serviceable. 15. dispensing hose nozzles and fittings are to be checked and are to be made serviceable. 16. straightness and structural integrity of bar is to be checked and same is to be rectified if required. 17. all the moving parts are to be lubricated with correct grade of lubes/greases. 18. conduct ndt if required for stress crack detection. 19. cleaning of equipment is to be done before and after servicing. 20. service status and next due date is to be tagged. 21. summary report is to be given to the user after repair of all the repairing work done. 22. adhere to oem servicing guidelines and intervals. 23. use of oem grade consumables and spare parts.

Central Government/Public Sector

CTN :40485553

02 Jun, 2025 NA

Rajkot - Gujarat

Tender For supply of coach length bypass flexible hose for lhb coaches of size 20 mm id with female end fittings, 3/4 inch bsp, hose length of 30 meters to withstand w/p-14 kg/cm2. make: hydromac, or poly hose, or power plus, or equivalent. [ warranty period: 30 months after the date of delivery ]

Central Government / Public Sector

CTN :40475543

19 Jun, 2025 NA

Secunderabad - Telangana

Tender For supply of pneumatic impact torque wrench with accessories consisting the following items. 1) pneumatic impact wrench of square driv e: 1/2 inch, max torque: 1220 nm, rpm: 8500, weight: 2.10 kg, length: 193 mm, nptf: 1/4 inch, min. hose bore: 10 mm noise: 91.9 db and similar ir make pneumatic impact wrench model: 2235qxpa. 2) recoiled hose of length - 10m with end fittings of dia 12x8mm. 3) heavy d uty set of impact sockets with 1/2 inch square drive of sizes 10,11,12,13,14,15,16,17,18,19,20,21,22,23,24mm 4) quick release coupler (q rc), size: 1/2 inch male x female. 5) filter regulator & lubricator of size- 1/2 inch with pressure gauge. [ warranty period: 30 months afte r the date of delivery ]

CTN :40479053

16 Jun, 2025 NA

Uttara Kannada - Karnataka

Tender For supply of hose with end fittings for 10 kg dcp extinguisher (n4210-p009291) , cap with washer for extinguisher dry powder for metallic (n4210-p009293)

CTN :40442599

02 Jun, 2025 NA

Thanjavur - Tamil Nadu

Tender For corrigendum : repair and overhauling service - repair of unit for preservation of article-96 fp with yt-82-000-00 set; repair of unit for preservation of article-96 fp with yt-82-000-00 set; yes; buyer premises-defect report of unit for preservation of artical-96 fp defect:- (a) qty -03, 200 kg/cm2 pressure hoses are unserviceable. (b) qty 06 stainless steel adaptor from gauge to hose is (c) end fittings of all the three hoses required replacement. work:- (a) three 200 kg/cm2 pressure hose of % inch dia required to be replaced with new and serviceable one. (b) replacement of qty 06 stainless steel adaptor (1-inch fine thread) from gauge to h se. (c) qty 06 end fittings are to be replaced with new one (d) 600 kg/cm2 test and burst pressure nabl certificate is to be provided with the item. (d) 1 yr complete warranty w.r.t subjected repair is to be provided after completion of repair..

Corporations And Associations And Others

CTN :40424011

28 May, 2025 NA

Panipat - Haryana

Tender For rate contract for mecgale pneumatics make ash dome type valve assembly > - 300 nb assembly, 300 nb assembly (w/c top plate & dome), 300 nb dome type valve, dome shaped head, dome shaped head (water cooled), inflatable seal (neoprene), inflatable seal (silicon), top plate, top plate (water cooled), insert ring, spigot piece, o ring for spigot piece, shaft, shaft (water cooled), shaft seal, shaft seal spacer, shaft bush, external lip seal, dowel pin inner, dowel pin outer, shaft boss with torque arm, shaft boss with striker arm, shaft boss with torque arm (w/c), shaft boss with striker arm (w/c), set of gasket, set of pneumatic fittings for valve assly., rotary joint for w/c inlet valve, neoprene rubber seal, pneumatic panel ###, single solenoid valve (rotex, 230vac), coil for single solenoid valve (230vac), seal kit for single sol.valve, 1/2 single solenoid valve , (rotex, 230vac), coil for 1/2" single solenoid valve , (230vac), seal kit for 1/2" single sol.valve, seal pressure gauge, warree, vessel pressure gauge, warree, pressure switch(seal pressure) rt116, indfos, pressure switch (vessel low pressure) rt112, pressure switch (vessel high pressure), others ####, air limit switch 1/4 (nucon), seal kit for air limit switch, air lubricator for pn. panel (1/2" / shavo norgen), air filter for pn. panel (1/2" (shavo norgen), air filter for vessel pressure (1/4" (shavo norgen), blow valve 50nb, seal kit for blow valve 50nb, repair kit for blow valve 50nb, pneumatic cylinder 6 x 12 , seal kit for 6" x 12" pneumatic cylinder, front clavish for 6" x 12" pneumatic cylinder, front clavish for 4" x 8" pneumatic cylinder, flexible hose 3/4" x 1000mm, flexible hose 1/2" x 1000mm, conveying nrv 50 nb, seal kit for conveying nrv 50 nb, repair kit for conveying nrv 50 nb, conveying nrv 20nb, seal kit for conveying nrv 20nb, repair kit for conveying nrv 20nb, pneumatic nrv 1/2" (schrader), pneumatic nrv 1/4" (schrader), quick exhaust valve 3/4", diaphragm for quick exhaust valve 3/4", quick exhaust valve 1/4", diaphragm for quick exhaust valve 1/4", bleed nipple 1/4" x 1.5mm (for inlet valve ), bleed nipple 1/4" x 0.5mm (for vessel pressure), spares for reverse pulse jet bag filter ##, filter bags 144 x 2000mm (pnf), cages 2m long, ventury 144, pulse valve (size 1"),230v ac, diaphragm fo pulse valve1", coil for pulse valve 1", 230v ac, ash conditioner##, spray nozzle 1/2", adjustable paddles, fixed paddles

Central Government/Public Sector

CTN :40383839

27 May, 2025 NA

Bhopal - Madhya Pradesh

Tender For tender for supply of pu pipe and other spares for frl fittings - frl brass nipple 1by2 inch male thread for connecting to frl , pu tube 8 id 12 od mm working pressure 135 psi and burst pressure 4 , pu spiral coil od 12 mm id 8 mm length 10 meters each workin , qrc fitted with 8 mm nipple for connecting pu tube and pu spiral coil , teflon coated male nipple 1by4inch bsp for connecting qrc to pneu , adapter connector 12 mm for pu tube to pu tube coupling , air hose nozzle 1by4 bsp male thread 8 mm for use with various pn , air hose nozzle 1by2 bsp male thread 8 mm for use with various pn , ss jubilee clamp (heavy duty) size 12mm 19mm hexagonal

Central Government/Public Sector

CTN :40419847

11 Jun, 2025 NA

Jodhpur - Rajasthan

Tender For supply of hose assembly water inlet vent. includes swivel fittings .9579999/17051113. as per drg.no. 9579999/17051113. [ warranty period: 30 months after the date of delivery ]

CTN :39926686

02 Jun, 2025 NA

Goa - Goa

Tender For corrigendum : tender for supply of blade grip , tachometer generator , unfolded blade mooring fittings , tool , manual cranking , appliance for measuring fan drive shaft , adapter , cable , fuel dumping hose , cotter split pin , washer , cover

Cylinder Pigtail Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government / Public Sector

Corporations And Associations And Others

Central Government/Public Sector

Central Government/Public Sector