Latest d shackle Tenders | Government d shackle Tenders

Central Government/Public Sector

CTN :45730981

27 Jul, 2026 NA

Bengaluru - Karnataka

Tender For supply of safety sling for traction motor 6fra6068 for wap-7 loco. as per spec. drg. of rdso/2011/el/smi/0269, rev.-1 dtd. 16-03-2016 or latest. [one set consist of (i) safety sling 1810 +3/-0mm long =04nos. as per drg no. skel-4859, alt-1 (ii) safety sling 1510+3/-0mm long =08nos. as per drg. no. skel-4859, alt-1 and (iii) d shackle for safety sling = 12nos. as per drg. no. skel-5007, alt-nil [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45735808

16 Jul, 2026 NA

Bengaluru - Karnataka

Tender For supply of kit for locking arrangement for center pivot pin to drg. no. wd-85079/s-2, alt-28 consisting of (1) shackle lock- item no 7, (2) pin- item no 8, (3) split pin to size 3.5mm dia and 50mm length. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :45741799

14 Jul, 2026 NA

Pune - Maharashtra

Tender For supply of shackle lock and lock pin for centre pivot pin to rdsos drg no. wd-85079-s/2, item no. 7 & 8, alt.no. 26 (twenty six) or latest. [ warranty period: 30 months after the date of delivery ]]

Central Government/Public Sector

CTN :45731457

06 Jul, 2026 NA

Ahmedabad - Gujarat

Tender For supply of set of safety sling double crimped at both end for traction motor 6fra6068 of wag9 loco. one set consist of (i) safety sling 1810 +3/-0 mm long =04nos. as per drg no. skel-4859, alt-1 or latest(ii) safety sling 1510+3/-0mm long =08nos. as per drg. no. skel-4859, alt-1 or latest and (iii) d shackle for safety sling arrangement = 12nos. as per drg. no. skel-5007, alt-nil or latest. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :45731118

06 Jul, 2026 NA

Multi City - Multi State

Tender For 5hp non clog submersible sewage pump set, pumping capacity 72 cubic meter per hour at 8 mtrs head with speed 1450 rpm, complete with water protected seal for continuous operating 415v, 50 hz, supply with 10 mtrs, resin filled control cable and 10mtrs s.s chain with shackle and suitable fully automatic three phase starter control panel( dol/star delta starter which is suitable for that pump) along with single phase preventer with phase reversal sensing and dry run relay protection (current sensing type), thermistor relay and moisture control relay, analog /digital voltmeter , analog /digital ammeter , power on/trip and indication lamps, on/off switch and auto/manual mode switch (authorized dealership certificate to be enclosed while submitting offer, test certificate and warranty certificate to be submitted along with supply). make: ksb, kirloskar, mbh. karvel or similar [ warranty period: 30 months after the date of delivery] ]

Central Government/Public Sector

CTN :45736389

09 Jul, 2026 NA

Madurai - Tamil Nadu

Tender For isi marked energy efficient bee 5star rated bldc ceiling fan 1200mm sweep with 3 blades suitable to operate in 230v, 50hz ac supply with 2 canopies and 300mm down rod. 1. power consumption (maximum): 28w 2. voltage range: 165 to 285 volts. 3.air delivery (minimum): 235cum/min 4. replacement warranty (minimum): 5 years 5. power factor (minimum): 0.9 6. total harmonic distortion (maximum): 10% 7. rated service value (in m3/min/watt): 8.4 8. special features: ir remote 9. availability of performance and type test report from govt. lab. nabl/ilac: as per is:374:2019 or latest. 10. the fan should comply to is: 374:2019 or latest. 11. blade thickness: 1.1mm 12. blade material: aluminium 13. bearing: double ball bearing 14. shank thickness (min): 2mm 15. shackle thickness (min): 2mm 16. rated speed (rpm): 350 rpm 17. copper winding insulation class: class f 18. preferred colour: white/brown/cream/ivory 19. preferred makes: atomberg, havells, crompton, orient, activa, bajaj warranty: 5 years, is specifications (a) is: 616/2010 for safety requirement for electronic equipment. (b) is: 374/2019 performance test for air delivery as per cl. no 10.3 of specification. test report: the firm has to submit type test report from government accredited test labs like nabl/cpri etc. [ warranty period: 60 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45731246

15 Jul, 2026 NA

Chennai - Tamil Nadu

Tender For supply of set of safety sling for tm 6 fra6068 of wag-9hc/wap-7 loco as per drg.rdso/ 2011/el/smi/0269 rev " 1" dated 16.03.2016. one set consist of 03 items in 24 nos. (1) safety sling 1810 mm long as per drg. skel- 4859 alt-1 qty. 04 nos. (2) safety sling 1510 mm long as per drg. skel- 4859 alt-1 qty. 08 nos. (3)"d" shackle for safety sling arrangement for traction motor as per drg. skel-5007 qty. 12 nos. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :45733138

08 Jul, 2026 NA

Multi City - Rajasthan

Tender For auction sale of depot ferrous scrap - scrap junk kachra cut pieces of ms and gi sheet plate, pipes, filter, angle, flat, strip, rod, round, wire, coach cut parts, p.way items, tin, drums, gate lamp, cooler body, protective tube, oil filter, fan case, carriage fan jali, dust shield spring, ladder, fire extinguisher, bucket and other similar items of junk rusty, dusty with or without negligible non-ferrous attachment if any. [ bin38-39)

Central Government/Public Sector

CTN :45733148

08 Jul, 2026 NA

Multi City - Rajasthan

Tender For auction sale of depot ferrous scrap - scrap junk kachra cut pieces of ms and gi sheet plate, pipes, filter, angle, flat, strip, rod, round, wire, coach cut parts, p.way items, tin, drums, gate lamp, cooler body, protective tube, oil filter, fan case, carriage fan jali, dust shield spring, ladder, fire extinguisher, bucket and other similar items of junk rusty, dusty with or without negligible non-ferrous attachment if any. [ bin 17&opp bin 17)

Central Government/Public Sector

CTN :45475154

07 Jul, 2026 30.00 Lacs

Gwalior - Madhya Pradesh

Tender For corrigendum : repair / replacement and maint of lt external electric supply works and other connected items at east & west wing in tech area under ge (af) tech area gwalior - s&f in repair mccb, 4 pole, 630 amps current rating and ultimate breaking capacity ics=icu =100% 36 ka with adjustable overload setting and having thermal magnetic release and to be fixed in distribution board, complete all as specified and directed., all as per item here-in-before but mccb, 4 pole, 400 amps current rating and ultimate breaking capacity 36 ka. ics = 100 % of icu, all as per item here-in-before but mccb, 4 pole, 315 amps current rating and ultimate breaking capacity 36 ka. ics = 100 % of icu, all as per item here-in-before but mccb, 4 pole, 250 amps current rating and ultimate breaking capacity 36 ka. ics = 100% of icu, all as per item here-in-before but mccb, 4 pole, 160 amps current rating and ultimate breaking capacity 36 ka . ics = 100 % of icu, all as per item hereinafter but mccb, 4 pole, 125 amps current rating and ultimate breaking capacity .16 ka . ics = 100 % of icu, all as per item here-in-before but mccb, 4 pole, 100 amps current rating and ultimate breaking capacity. 16 ka. ics = 100 % of icu, all as per item here-in-before but mccb, 4 pole, 63 amps current rating and ultimate breaking capacity .16 ka . ics = 100 % of icu, m&l for earthing complete with galvanised steel plate electrode 600x600x6mm thick buried directly in ground (top edge of the plate should not be less than 1.50mtrs below ground level) connected to gi strip 25 4mm by means of bolts, nuts check nuts and washers of galvanised iron or steel connected to earthing test point all as specified incl 20 mm gi tubing medium grade and necessary fitting for protection of gi strip incl laying of charcoal dust and common salt in alternate layers of 150mm th, pcc chamber using pcc(1:3:6) type c-1 using 20mm graded stone aggregate, rcc cover 40mm thick (1:2:4) type b-0 using 12.5mm graded stone aggregate reinforced with 6mm dia round bar @ 75mm c/c both ways with ms handle 8mm dia, plastering 15mm thick cm (1:6) externally up to 150mm below ground level, gi funnel with 20mm dia medium grade gi pipe for watering and wire mesh incl excavation and earth work and disposal of surplus soil complete all as specified and shown on electrical plate no.3 of ssr part-i (2009) and connected to earth test point incl testing and marking bldg nos and writing test results (in white) on a black painted m.s. plate (size 300x300x3mm th) duly welded with angle iron of size 40x40x5mm, 60cm long, fixed with the earth pit chamber by grouting complete all as specified and directed.note :- (i) gi strip 25 4mm and gi pipe medium grade, up to 7.5mtr shall be deemed to be included in the rates quoted for earthing.(ii) excavation and earth work in any type of soil strata shall be deemed to be included in rates quoted for earthing. (iii) the rates quoted by the contractor are deemed to be included for pcc chamber and pcc cover as per ssr part-1.-, m&l for preparation of old painted surfaces of lt steel tubular pole/strut, of any description and in any position 9.00/8.50 mtr height and scrapping of pole with emery paper and applying one coat of aluminium paint on all the metallic surfaces including protection pipe, cross arms, clamps, gi pipe bracket of street/security light, anti climbing devices etc and providing three nos radium band strips complete all as specified and directed., supplying ,laying, jointing and testing xlpe insulated, armoured, heavy duty, aluminum conductor cable 1100 volts grade ,laid in trenches/ducts, floors, fixed to walls etc. complete all as specified and directed for the following sizes.note: the cost of taking down of lt ug cable is deemed to be included in the quoted rate, 35 sqmm 3 core, 50 sqmm 3 core, 70 sqmm 3 core, 185 sqmm 3 core, 240 sqmm 3 core, excavation in trenches n exc 1.5 mtr wide and n exc 1.5 mtr depth for foundation and laying of cable and get

D Shackle Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors