Latest da regulator Tenders | Government da regulator Tenders

State Government

CTN :45290039

01 Jun, 2026 1.72 Lacs

Rohtak - Haryana

Tender For job no.1245/2026 (hew) work for repairing of children playing equipment and distempering on mature tree plants and providing and fixing of garden iron bench in pt. shri ram sharma park sector-13 at u/e rohtak with 06 months defect liability period - 11.66.1 interior finishing distempering with 1st quality acrylic distemper, having voc (volatile organic compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. 1 one coat, 26.58.3 supply and installation of garden bench 3 cast iron bench of 1800 mm length, 900 mm width, 450 mm seating height, sides made of cast iron. seat and back shall be made of 10 strips of m.s. pipes 63 mm x 25 mm of 14 gauge with one m.s. flat 25 x 10 mm welded at the centre, below and back of the seat and back rest. spray painted with approved brand paint. fixed by grouting with 1:2:4 cement concrete (minimum weight of each bench 105 kg). all materials required to be as per bis specifications., job work repair of children playing equipments. , job work repair of sea saw , job work repair of bridge ladder. , job work multiplay station repairing welding and new plastic slide and top roof fiber shade any colour.

State Government

CTN :45268513

05 Jun, 2026 NA

Bankura - West Bengal

Tender For supply delivery and fitting fixing of gaseous chlorination items for the standby system of clear water pumping station and supply of 1 no empty chlorine tonner at ibs uporgora under chhatna, saltora block sub-surface water based piped water - supply and delivery of gaseous chlorination unit spares (0-10kg) & (0-4kg)kg/hr. require of wallace & triman evoqua, vacuum regulator (wall/cylinder mounted)with auto switchover facility, capacity 0-10 kg/hr max, evoqua make s10k scale controller, capacity 10.0kg/hr, manual control, evoqua make 1 injector suitable for 40 psi backpressure, fitting fixing of the above new supplied spares on the existing position part by part with new ejector pipe line with necessary fitting materials and necessary welding job by expert mechanical complete the job as per direction of eic and as per is:10553., supply and delivery at site of 1000 kg empty chlorine tonner hydraulic test pressure 30 kgf design as per asme section viii div.1 with hot-forged steel hook and a safety tongue piece, add: 18% gst, add: 1% cess

State Government

CTN :45268542

05 Jun, 2026 NA

Bankura - West Bengal

Tender For supply delivery and fitting fixing of gaseous chlorination items for the standby system of clear water pumping station and supply of 1 no empty chlorine tonner at intake kukrakuri under chhatna, saltora block sub-surface water based piped - supply and delivery of gaseous chlorination unit spares (0-10kg) & (0-4kg)kg/hr. require of wallace & triman evoqua, vacuum regulator (wall/cylinder mounted)with auto switchover facility, capacity 0-10 kg/hr max, evoqua make s10k scale controller, capacity 10.0kg/hr, manual control, evoqua make 1 injector suitable for 40 psi backpressure, fitting fixing of the above new supplied spares on the existing position part by part with new ejector pipe line with necessary fitting materials and necessary welding job by expert mechanical complete the job as per direction of eic and as per is:10553., supply and delivery at site of 1000 kg empty chlorine tonner hydraulic test pressure 30 kgf design as per asme section viii div.1 with hot-forged steel hook and a safety tongue piece, add: 18% gst, add: 1% cess

CTN :45282015

01 Jun, 2026 1.47 Crore

Imphal - Manipur

Tender For supply of a portable shelter , arrangement for transportation , steel structur , electricla items , external elect store , furniture items - shs 100 x 100x 4.0 mm thick. make: sail /tata / apollo / equivalent isi marked, shs 50 x 50x 2.00 mm thick. make: sail /tata / apollo / equivalent isi marked, rhs 100 x 50x 4.05 mm thick. make: sail /tata / apollo / equivalent isi marked, ms plate 20 swg /1 mm thick as in wall (outer body), ms plate 18 swg /1.22 mm thick as in roof (outer body), ms plate 26 swg /0.46 mm thick as in secondary outer body., 4 mm thick acp sheet (inner) (make alstone/eurobond/ aludecor/ alstrong), hybrid (poly-isocyanate) pir panel insulation shall be provided using 45 mm thick density of 48 kg/m³ with aluminum foil one side, hdf laminated wooden flooring 8 mm thick (make - action tesla/centurry/pergo/greenpanel/micasa), 19mm thick ply make: kitply / green ply / century ply, steel doors: one number of door of size 900mm x 1800mm with inside opening shall be provided with complete accessories., steel doors: one number of door of size 900mm x 2100mm with inside opening shall be provided with complete accessories., detachable ms steps: 1x ms steps of size 600 x 300 mm 6 tier of steps made up of ms angle of size 40mm x 40mm x4mm (wt not less than 4.20 kg/m) would be provided. reference drawing as directed and approved make: sail/tata/jindal, pop rivet 3m x ½”, pop rivet 4m x ½”, welding rod n. 10, primer paint, ir absorbent paint camouflage pattern, metal putty, rubber solution, hydraulic jack with rubber hoses and fittings, electrically operated winch assy, jack side support 2 ton, map boards 6' x 6' with all accessories, vps / projector system stand, canvas cover 30'x30', 3 kg fire extinguisher & fire ball, self screw 25x1, multi spectral camoflauge net, led concealed light 9’’ x 9”x 22 watt, make- havells/ bajaj/ crompton), entrance light (bucket light), ac starter with fittings and mcb, single core wire 2.5mm, single core wire 1.5mm, single core wire 1 mm, insulation tape, modular s/w with cover on/off 5/15, socket 5 amps 3 pin, socket 15 amps 3 pin, switch boards 10 “ x 10”, switch boards 6” x 6” & 6” x 3”, exhaust fan 300mm, work station/ partition, wall mounted fan 450mm, focus / spot light for mapboards, hdmi cable for projector, led screen (sonic view / equivalent) 65'" (164 cm) with modular stand 4k ultra hd (3840 x 2160) etc. make - samsung / sony, de-humidifier 1.5 ton with stablizer and complete fittings etc. make- voltas/ daikin/lg/blue star/ panasonic., electric connections. cables to be used should isi marked of make havells/ crompton greeves/ plaza , fire retardant material. 1.5 sqmm cable to be used in all light points and 2.5 sqmm cable to be used in power points. 18 watt & 11 watt leds of make: cromptongreaves/bajaj/havells/syska . shall be provided at all light points. all switches to be used should be of 6 amp modular type of havells/anchor /crompton greeves/ general electric. the fwg electric connections shall be provided for :-, (ii) power point of 5 pin15 amp socket and 8 nos switch combination of modular type all switch point will be modular type will be provided as approved of make crompton greave/bajaj/havells ., (iii) concealed conduits will be provided for cabling in the portable shelter set of pvc insulated cable 1.5/2.5 sqmm multistanded copper conductor single core 1100v, grade conforming to is 649/1990 of make havells/finolex/plaza, (iv) mcb dp 32amps conforming to is 8828-1996 make crompton greave/ bajaj/havells, (v) miniature circuit breaker (mcb) 6 amp to 32 amps (single pole) make : crompton reave/bajaj/havells., (vi) change over over 63 amps, 3 pole of make: crompton greave/bajaj/havells., cable jointing kit for 11kv (earthed) grade cable for straight through heat shrinkage type joint complete with jointing material and accessories suitable for 3 core xlpe armoured aluminum conductor cable of size 16 sqmm to 35 sqmm, power backup (ups/ inverter system) capacity 3

Central Government / Public Sector

CTN :45136391

02 Jun, 2026 NA

Secunderabad - Telangana

Tender For secunderabad division electrical department - (i) hyderabad coaching depot - proposed service building for mechanical & electrical departments for staff, stores and provision of surveillance cameras (ii) snf-freight depot - provision of welding facilities at snag yard & service building on first floor on atc hostel building (iii) els-lgd- upgradation of existing facilities at els/lgd (iv) proposed agumentation of rc-1, ii, iii of rajashree cement works taking off from malkhaid road station including yard modification (v) modification of the express bay shed at dls /kzj (vi) dls/kzj -extension of hr bay by 18 m on line no.5 and 6 towards sc -electrical arrangements

corporations/Associations/Others

CTN :45273158

25 May, 2026 24.99 Lacs

Ahmedabad - Gujarat

Tender For maintenance, repair work, welding fabrication work and upgradation work and related work as required for cutting and restoration of c.i./d.i. ms and psc lines of the water distribution station network in the jodhpur ward, west zone, (arc)

Central Government / Public Sector

CTN :45254519

26 May, 2026 NA

Vijayawada - Andhra Pradesh

Tender For supply of da regulator with double gauge as per the following technical specifications. i. regulator should be double stage confirm to is: 6901 / iso 2503. (ii). body material construction: brass. (iii). maximum inlet pressure: 40 bar. (iv).maximum outlet pressure: 1.5 bar (v).maximum flow rate: 250 l/min (vi).inlet connection: 5/8 inch bsp lh (male) (vii).outlet connection: 3/ inch bsp lh (male) (viii).pressure gauges: 02 no's (ix).esab make model no ida 50b or equivalent models in makes of ador / harris / messer / gce only. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

CTN :45224892

26 May, 2026 7.53 Lacs

Leh - Jammu And Kashmir

Tender For supply of screw driver set , combination ratchet set , cutting plier for eelctrican , imapct screw dvr set , machnical tray , glue gun , spanner ojde 10x11 , spanner ojde 12x13 , spanner ojde 14x15 , spanner ojde 18x19 , spanner ojde 20x22 , spanner ojde 55x60 , spanner rtde 10x11 , spanner rtde 12x13 , spanner rtde 18x19 , spanner rtde 20x22 , spanner rtde 24x27 , pipe wrench big , screw dvr long , cutting plier , socket set , spanner combination 5 32mm , t handle wrench , magnatic peck up tool , sealing wire cutter , pnematic grease gun , trolley for battery carrying , table grinder bosch , battery charginh stn , welding holder , cutting balde 4 inch , cutting balde 14 inch , ac dc clamp meter , freuency meter , hot air gun , electric air blower , paint gun heavy , puller 100mm , puller 200mm , rechage troche , magnatic rechargble led light , head lamp , welder soldering station , digital water , spanner open 16x17 , spanner open 16x19 ) /bid number : gem/2026/b/7529792 * /dated: 16-05-2026 & & / bid document 1 / 40

CTN :44964160

20 May, 2026 18.38 Lacs

Bhadradri Kothagudem - Telangana

Tender For corrigendum : roof bolts, m.s. bolts & nuts , rivets, washers & screws , , dog nails , , fish plates, nuts & bolts for fish plates , , belt jointing pins , , cable hooks and signal hooks , , belt conveyor rollers , , belt sections , , resin capsules , , cement capsules , , gi canisters , , blasting gallery - spacers , , radiator repairs , , repairs and rewinding of motors of ac & dc , , repairs / rewinding of transformers (welding/lighting/power) , , gl wire , , wire mesh for longwall salvage , , manufacturing of supply of electrical coils for , , i) ac motors up to 6.6kv grade , , li) transformer coils up to 33 kv grade , , repairs of rotors for electric motor , , lighting cable , , steel chock manufacturing , , house wiring , , all types of fan repairs , , shovel bucket welding , , repairs of pumps , , couplings manufacturing , , special steel and alloy castings , , (tooth points, track pads, mn steel casting) , , manufacturing of fly ash bricks (not to be manufactured at stores site. it shall be at their own site) , , manufacturing of pump components (spares) , , transformer oil filtration , , reconditioning of drill bits an drill rods. , , vulcanizing the old training cable sof drill machines, sdls, lhds etc (work should be carried out at the respective mine premises. , , manufacturing of earth clamps, g.i.flats, g.i.bolts and nuts. , , crimping of hydraulic hoses. , , repairs to hydraulic pumps, motors, control valves and other related components. , , refurbishing of lt & ht switches with oem spares including testing. , , manufacturing/repairs of slip rings & d-contacts. , , furniture repairs i.e. cane chairs, tables, almirahs etc. , , repairs to wet grinders, water purifiers and water coolers , , manufacturing of coupling bolts of all sizes , , fabrication of oht line components like cross arms, clamps, stay wires, cross brassings, base plates etc. , , manufacturing of haulage rope drum rollers. , , all sizes of ventilation doors. , , safety boards designing/stickering/painting with retro-reflective radium papers/paint on hemm/ radium stickering in underground & surface, radium boards, safety boards & radium jackets. , , fabrication of lighting & cable cross over towers , , maintenance & repairs of air conditioners on hemm , , painting work in underground and on surface , , fabrication and erection of ms structural works like gantry, bunker etc. , , tailoring works at hospitals & area workshops , , manufacturing of hume pipes , , clay pills manufacturing , , maintenance of pmts/lighting transformers/power transformers & sub-stations , , erection /renovation of residential/pmts/sb-station earth pits (conventional type /chemical type). , , testing of all protective relays & mprs , , tub assembling/repairing of coal tubs in mines. , , cl casting works like ci pulley, tub wheels , , outsourcing works in mines, like masonary walls construction, surface material loading, cleaning and dusting in underground etc. , , all types of computer software installation, antivirus, hardware and network installation. , , cc cameras installation and repairs.

CTN :45214237

25 May, 2026 1.47 Crore

Imphal - Manipur

Tender For supply of a portable shelter , arrangement for transportation , steel structur , electricla items , external elect store , furniture items - shs 100 x 100x 4.0 mm thick. make: sail /tata / apollo / equivalent isi marked , shs 50 x 50x 2.00 mm thick. make: sail /tata / apollo / equivalent isi marked , rhs 100 x 50x 4.05 mm thick. make: sail /tata / apollo / equivalent marked , ms plate 20 swg /1 mm thick as in wall (outer body) , ms plate 18 swg /1.22 mm thick as in roof (outer body) , ms plate 26 swg /0.46 mm thick as in secondary outer body. , 4 mm thick acp sheet (inner) (make alstone/eurobond/ aludecor/ alstrong) , hybrid (poly-isocyanate) pir panel insulation shall be provided using 45 mm thick density of 48 kg/m³ with aluminum foil one side , hdf laminated wooden flooring 8 mm thick (make - action tesla/centurry/pergo/greenpanel/micasa) , 19mm thick ply make: kitply / green ply / century ply , steel doors: one number of door of size 900mm x 1800mm with inside opening shall be provided with complete accessories. , steel doors: one number of door of size 900mm x 2100mm with inside opening shall be provided with complete accessories. , detachable ms steps: 1x ms steps of size 600 x 300 mm 6 tier of steps made up of ms angle of size 40mm x 40mm x4mm (wt not less than 4.20 kg/m) would be provided. reference drawing as directed and approved make: sail/tata/jindal , pop rivet 3m x ½” , pop rivet 4m x ½” , welding rod n. 10 , primer paint , ir absorbent paint camouflage pattern , metal putty , rubber solution , hydraulic jack with rubber hoses and fittings , electrically operated winch assy , jack side support 2 ton , map boards 6' x 6' with all accessories , vps / projector system stand , canvas cover 30'x30' , 3 kg fire extinguisher & fire ball , self screw 25x1 , multi spectral camoflauge net , led concealed light 9’’ x 9”x 22 watt, make- havells/ bajaj/ crompton) , entrance light (bucket light) , ac starter with fittings and mcb , single core wire 2.5mm , single core wire 1.5mm , single core wire 1 mm , insulation tape , modular s/w with cover on/off 5/15 , socket 5 amps 3 pin , socket 15 amps 3 pin , switch boards 10 “ x 10” , switch boards 6” x 6” & 6” x 3” , exhaust fan 300mm , work station/ partition , wall mounted fan 450mm , focus / spot light for mapboards , hdmi cable for projector , led screen (sonic view / equivalent) 65'" (164 cm) with modular stand 4k ultra hd (3840 x 2160) etc. make - samsung / sony , de-humidifier 1.5 ton with stablizer and complete fittings etc. make- voltas/ daikin/lg/blue star/ panasonic. , electric connections. cables to be used should isi marked of make havells/ crompton greeves/ plaza , fire retardant material. 1.5 sqmm cable to be used in all light points and 2.5 sqmm cable to be used in power points. 18 watt & 11 watt leds of make: cromptongreaves/bajaj/havells/syska , shall be provided at all light points. all switches to be used should be of 6 amp modular type of havells/anchor /crompton greeves/ general electric. the fwg electric connections shall be provided for :- , ii) power point of 5 pin15 amp socket and 8 nos switch combination of modular type all switch point will be modular type will be provided as approved of make crompton greave/bajaj/havells . , iii) concealed conduits will be provided for cabling in the portable shelter set of pvc insulated cable 1.5/2.5 sqmm multistanded coppper conductor single core 1100v, grade conforming to is 649/1990 of make havells/finolex/plaza , iv) mcb dp 32amps conforming to is 8828-1996 make crompton greave/ bajaj/havells , v) miniature circuit breaker (mcb) 6 amp to 32 amps (single pole) make : crompton reave/bajaj/havells. , vi) change over over 63 amps, 3 pole of make: crompton greave/bajaj/havells. , cable jointing kit for 11kv (earthed) grade cable for straight through heat shrinkage type joint complete with jointing material and accessories suitable for 3 core xlpe armoured aluminum conductor cable of size 16 sqmm to 35 sqmm ,

Da Regulator Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

State Government

Central Government / Public Sector

corporations/Associations/Others

Central Government / Public Sector