Latest damper bracket Tenders | Government damper bracket Tenders

Central Government/Public Sector

CTN :40918260

28 Jul, 2025 NA

Chennai - Tamil Nadu

Tender For supply of one coach set of kit items for asr fiat bogie frame. 1) anti roll bar support to drg. no. 66703018, col.i - 4 nos primer only to be coated as per clause 4 of specification no.mdts-166, rev.02. 2) disc to drg.no. aaa03168 - 8 nos supplier shall ensur e that component is protected against rust/corrosion during transit and storage with an easily removable rust/corrosion protectent. as per rcf specification md44121,dated 19-04-2011(para-1) 3) cylindrical part to drg. no.aaa03204 - 2 nos 4) screwing block to dr g.no.aaa03196- 8 nos 5) bracket to drg.no.aaa03191- 4 nos 6) boss complete to drg. no. 4 5503020, alt 'a', col.i - 6 nos 7) stiffener(m10) to drg. no. aaa03187 -2 nos 8) yaw damper br acket for fiat bogie frame with secondary air spring bogies to drg.no. 667-0-3-010, alt 'a' - 4 nos material specn.no. en10025-5,2004, s355j2w+n to be used in lieu of en10025/29, s355 j2g3 seamless tube to be procurecd from icf approved sources only. 9) vertical damper bracket lh for fiat bogie with air spring to drg. no.834-0-3-005, alt 'a' = 2 nos material sp ecn.no. en10025-5,2004, s355 j2w+n to be used in lieu of en10025/29, s355j2g3 wherever me ntioned in drawing. 10) vertical damper bracket rh for fiat bogie with air spring to drg. no. 834-0-3-006, alt 'a' = 2 nos material specn.no. en10025-5, 2004, s355 j2w+n to be used in lieu of en10025/29, s355j2g3 wherever mentioned in drawing. 11) bracket for installation lever (rh) to drg.no. 667-0-3-005 alt 'b'=2nos 12) bracket for installationlever (lh) to dr g. no. 667-0-3-006 alt 'b'=2nos 13) sleeve to drg.no.aaa03182 alt 'a'- 8 nos 14) bush to drg. no. aaa03183 -32 nos s.no.1 to 14 makes one coach set. the firm shall fulfil the manufact uring facility as per icf/md/spec-310, rev-00 amd-nil special condition :-items to be supplied i n coach sets. suitable packing to be done to avoid damage during transit, unloading an d rust prevention during storage. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :40905563

02 Jul, 2025 NA

Kanakapura - Karnataka

Tender For supply of damper bracket, as per drawing: lw05117 alt. 'a', packing instruction: suitably pa cked in jute bags [ warranty period: 30 months after the date of delivery ]

CTN :40793163

02 Jul, 2025 NA

Jabalpur - Madhya Pradesh

Tender For corrigendum : supply of pintle saddle forging to ilg-1458/1, pt. no. ifl-8462 matl. sta -59, z condition. esr/var the percentage , trunion block forging to pt no iwp-1616 note; matl; b5; 3s144-1995(1999) , gde s144d esr/var route s- , forging for trunnion lt drg. no. gcf mn-4440(h) (ref. pt. no. iwp- 1779) matl bs: 3s144: 95(99) gde s144d su , bracket for elevating arc (bottom) to pt no. iwp- 1780. matl: bs: 3s144: 1995 (1999) gd. s144d. sulphor= 0 , forging for crank rt/lt to drg. no. gcf-mn-4170(i) ref, pt. no. iwp-1717 & iwp-1720 resp. matl: bs: 3s144: , housing for extension part-ii forging to pt. no. iwp-1810 bs; 3s144-95(99) gde s144d, lfvd, sulpher= 0.01

Central Government/Public Sector

CTN :40904677

04 Aug, 2025 NA

Harnaut - Bihar

Tender For supply of lateral damper bracket for fiat bogie with air spring to rcf's drg no. lw05 117, alt.- a. materials and specification as per drawing. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :40781320

02 Jul, 2025 NA

Kanakapura - Karnataka

Tender For corrigendum : supply of damper bracket, as per drawing: lw05117 alt. 'a', packing instruction: suitably pa cked in jute bags [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :40889530

22 Jul, 2025 NA

Kanakapura - Karnataka

Tender For supply of primary damper bracket, as per drawing: 1267711 ver. 01r, packing instruction: su itably packed in jute bags [ warranty period: 30 months after the date of delivery ]

CTN :40825717

15 Jul, 2025 NA

Parganas - West Bengal

Tender For purchase of spares - oring (ms sl-164) , gasket(fig-3250 oblique 02) , key(fig-62) , spring , ring snap , screw driver , collar , gasket header cover , spnr ojde 16x17 , packing (bd eng fig k2)(1set 9nos) , seal o ring (ms sl-128) , washer , pin dowel , hexagon screw , o ring , key(fig no-6015 , sl no-50) , spnr de 20x22mm , terminal battery negative (fig-1035) , bolt , spring(fig-03) , ojde spanner 18x21 mm , spring , positive terminal (ms sl-649) , spring , oil can 1 1 by 2 pint , o ring , o-ring , seal bearing , bushing rubber , gasket(ms sl-139) , flange , adjustable spanner 200mm , plunger inter lock , seal , oil , screw , spring , connection fuel inlet (ms sl-101) , gasket , packing , strainer , clamp , clamp , flexible nut spnr 350mm , spanner 10x11 mm (ojde , open end) , spill tube , hour meter cable , clamp , socket 22 mm(eqpt sl no-g15313) , wrench filter , hose(fig-38) , bolt , o ring , socket 17mm , pin , piston , spnr ojde 32x36mm , connection fuel drain(cum-p30) , tube assy , pre filter assy , ring o cover , screw driver attachment(sl no-g15313) , toggle switch (ms sl-202) , knob , bearing , crnkpin , std(sp) , 1pr , ring , rubber hose lg 72 , spnr ojde 12 x 13 , hose , hose , bearing , rfi capavitor assy , gasket cover , oil cooler , bushing , spnr ojde 18x19mm , 24 mm socket(sl no-g15313) , nut rod (ms sl-06) , 27 mm socket(sl no-g15313) , pinion spring , tube , 30 mm socket(sl no-g15313) , seal oil , sealing ring for 4 (mico) , shaft , clutch inner race(ms sl no-593) , seat (hyd filter) , rachet reversible , joint eye , plug , ring compression , set (oem) , socket 24mm with handle , connector , scraper lh , lever , wrench hook , ring seal , pipe , exhaust , main bearing , thrust , ball brg , cover , hose , head , bush pinion (ms sl-590) , hyd pump service kit , fuel pump , clutch plate , tube , tube , hose(n743) , bearing , ball , regulator (make lucas tvs)(ms) , lever change , adaptor , flywheel , strainer , flyweight assy , solonide switch , solonied switch , relief valve assy , lamp guard rear rh , lever (fig no 3065) , plate , bushing spherical(fig-6086) , adapter , manifold , water , manifold , water , oil , filler , bracket , flange , coupling , water pump service kit , brake(band) assy , hose , housing , drive tachometer , fuel cut-off valve , alternator assy , rod , seal kit , hose , bearing assy , hose (fig no-4512) , gear driven reverse(fig-2125) , lever , cover , shell connecting rod std (ms sl-07) , cover , bearing , ball , gear driven 3rd , trunion assy , rod , mounting flange assy , c ebracket assy , fan , grill , feed pump assy , cyl assy(fig-41) , rod , drum brake , starter (l-tvs -11teeth) , gear assy , idler gear , delivery valve holder , shifter clutch dog(price list sl-836) , pressure plate assy , board floor , idler front , gear and pinion set (counter shaft) , intermediate shaft a , joint (p-141) , camshaft(os sl no-526) , sprocket shaft removal(ctlg sl-14) , main clutch assy , clutch housing assy

Central Government/Public Sector

CTN :40782177

11 Aug, 2025 NA

Ajmer - Rajasthan

Tender For supply of damper bracket for lateral damper as per rcf drg. no. lw05117 alt a. matl.&sp ec. as per drg. [ warranty period: 30 months after the date of delivery ]

CTN :40724409

14 Jul, 2025 NA

Kanchrapara - West Bengal

Tender For supply of set of secondary vertical damper bracket assembly (air suspension) consisting of 02 items ( 01 no. lh & 01 no. rh /set) 1. secondary vertical damper bracket assembly lh (air suspension) to rcf dr awing no. lw03339 alt. a, 2. secondary vertical damper bracket assembly. rh (air suspension) to rcf dra wing no. lw03344 alt. a, [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :40726009

02 Jul, 2025 NA

Mumbai - Maharashtra

Tender For bogie bolster arrgt.to drg. no. icf/mrvc/m-0-4-001/col.i, alt l and rdso specn.c-9 202, rev.02. the firm shall fulfil the requirements as per icf/md/specn.147, issue status: 01, r ev-02 with amd no: 01. items shall be suitably packed to avoid ingress of water in center piv ot housing and spigot housing. threaded air connection at bolster end shall be closed. bi odegradable plastic/wooden covers may be used for closing. all machined areas shall be c oated with grease (lithium based) before packing. safety item special condition : paint scheme shallbe as per drg. firm to supply the bogie bolster with suitable packing so that the bogie bolster parts like cp pin housing, side bearing flange, damper bracket , reservoir bracket,levelling valve fixing bracket and spigot housing are not damaged during transpo rtation /handling /storage. [ warranty period: 30 months after the date of delivery ]

Damper Bracket Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector