Latest damper pulley Tenders | Government damper pulley Tenders

Central Government/Public Sector

CTN :40641949

10 Jul, 2025 NA

Raigarh - Chhattisgarh

Tender For corrigendum : supply of hand operated chain pulley block as per is 3832 (q4)

CTN :40963022

25 Jul, 2025 25.21 Lacs

Visakhapatnam - Andhra Pradesh

Tender For supply of megger , grinding machine , motor checker , 2 ton chain pulley , 2 ton chain block , 1 ton chain pulley , 1 ton chain block , crimping tool , hydraulic crimping tool , phase indicator , soldering iron , power quality analyzer , bearing puller

State Government

CTN :40939435

15 Jul, 2025 4.89 Lacs

Jummu - Jammu And Kashmir

Tender For as per boq - drilling of gravel packed bore hole of 250mm diameter and lowering of liner assembly consisting of blind and strainer pipes of 125mm dia. upto 90 mtr by using direct/ rotary / dual rotary method including installation of mark-ii hand pump and construction of platform as per unicef norms / as per site conditions, providing of 125 mm dia. m.s. casing pipe. the 125mm dia. m.s. casing pipe isi marked should have thickness of 5.4mm conforming to as per is 4270 / 2001 medium class (part-i) 2004 (heavy c class) electric resistance welded beveled ended inside beed free pipes. all pipes from inside and outside to be provided with two coats of anti-corrosive paint of superior/approved quality. there should be no circumferential weld. the pipe from inside should be beed free having smooth finish. each pipe shall have subjected to hydraulic pressure test at the manufacturer works in accordance with is 4270/2001 with latest amendments. all the physical and chemical properties of pipe including tensile strength should be in accordance with is 4270/2001 with latest amendments., providing of pea shaped gravel as per is-4097 of 1967 with latest amendments for gravel packing of hand pump, shrouding during lowering of liner assembly, cost of slotting of ms pipe 125 mm dia ( to be charged as per actual), development of bore hole by air compressor of adequate capacity to give clear water free from sand and impurities, providing, fitting, installation, testing and commissioning of submersible pump set (reputed make) of suitable parameters depending upon the depth and discharge of the bore hole. the job includes erection of tripod stand and fixing of chain pulley block. then lowering of submersible pump set in to the bore hole by way of providing and lowering of 32 mm dia. hdpe pipe, submersible cable with fixtures such as rope, clamp, nuts, bolts & washers. fabrication and fitting of well cap. providing, fitting and installation of single-phase starter cum controller panel in sheet enclosure outdoor type conforming to is standard. providing and laying of 3 core submersible cable and 2-core pvc insulated copper conductor of suitable capacity as service line required from lt pole to starter panel of reputed make and fixing of lt control panel on wall by using wall mount fastners. making of electrical connections with the starter panel, service line and submersible pump set after properly thimbling and testing and commissioning thereof. the job includes the cost of material and labour charges. complete job.

Central Government And Public Sector

CTN :40937529

24 Jul, 2025 NA

Damanjodi - Odisha

Tender For supply of 1.66604004050 manorail trolley, hand operated, capacity-10t , 2.67402040150 chain pulley block 10 mt

Central Government / Public Sector

CTN :40729881

08 Jul, 2025 NA

Kamrup - Assam

Tender For corrigendum : repair, maintenance & operationof heavy equipments (of garage section) at guwahatirefinery tender no 9010c25b18 grinding machine, machine tools and cutting tools, hand drilling machine, reciprocating saw for polymer cutting and other hand held machine tools, plasma cutting machine gas cutting machine, oxy acetylene gas cutting set comprising regulator, blow pipe, flash back arrestor, cutting machine, nozzles, hose, and connectors, hydro blasting machine, chain pulley block, hand tools and non sparking tools, sling and d shackle, torque tool and bolt tensioner, flange spreader, nut splitter, hydraulic jacks.

Central Government/Public Sector

CTN :40703524

07 Jul, 2025 NA

Medak-T - Telangana

Tender For corrigendum : supply of chain pulley block cum monorail

Central Government And Public Sector

CTN :40446749

10 Jul, 2025 NA

Begusarai - Bihar

Tender For corrigendum : supply of chain pulley blocks - 0.5 mt cp block assembly with trolley mounted , 1 mt cp block assembly with trolley mounted , 2 mt cp block assembly with trolley mounted , 5 mt cp block assembly with trolley mounted , 7.5 mt cp block assembly with trolley mounted , 10 mt cp block assembly with trolley mounted , 15 mt cp block assembly with trolley mounted , 1 mt cp block assembly with mounting hook , 3 mt cp block assembly with mounting hook , 5 mt cp block assembly with mounting hook , 7.5 mt cp block assembly with mounting hook

CTN :40640369

05 Jul, 2025 NA

Kamrup - Assam

Tender For bid to ras corrigendum : tender for supply of 1466-111-626 camplate , 6377342 filter insert fuel for engine , 6377352 filter insert oil for engine or elopic f , 482-hp-11716 chain pulley block (0.5t capacity) , 2520-72-0000525 tfr gear box (tfr transmission assy) , 4030-000004 anchor spikes , 2604-3530-0106 crown wheel and tail pinion (41/71) orliko , 5120-000358 1 hydraulic jack with handle 8 ton capaci

Central Government/Public Sector

CTN :40922994

12 Jul, 2025 NA

Panvel - Maharashtra

Tender For supply of hand operated chain pulley block as per is 3832 (q4)

Corporations And Associations And Others

CTN :40927279

14 Jul, 2025 NA

Rohtak - Haryana

Tender For supply of hardware materials - hardware items, ms nipple"c" class size 3/8"x4" both ends threaded, ms long bend 3/8"external threaded at both ends., ms nipple "c" class size 1/2"x4" both ends threaded, ms long bend 1/2" external threaded at both ends., ms connector 1/2" bsp, s.s.socket 3/8" bsp, ms socket 1/2" bsp, angle grinder wheel ag 4 -4", bosch make, buffer wheel - 4", bosch make., flat centre cutting wheel for metal107x1.0x16, angle grinder wheel ag-7 (180x6.6x22.23), bosch make, rubber hose pipe 3/4", wire breaded steam hose pipe 3/4",w.p.10 bar bs 342-1, electric air blower 620 w,model gbl 620, bosch make., transparent sheet white 10 mm thick ,size 15"x 6 feet, forged steel u-clamp for steel wire rope 1/2", forged steel u-clamp for steel wire rope 3/4", screw clamp ( heavy) for hose pipe 1/2", screw clamp ( heavy) for hose pipe 1", screw clamp ( heavy) for hose pipe 1.5", red lead, ms ferrule 16 mm, s.s. plate 8 mm thk., (1250x2500), plumber blocks s.n. 510, jmc make., spring steel flat 38x6 mm, spring steel flat 63x10 mm, spring steel square bar size - 2", cotton waste, coconut rope, emery cloth - rough, carborandum make., emery cloth - fine, carborandum make., emery tape - rough, carborandum make., emery tape - fine, carborandum make., emery paste - rough (400 gm pack), carborandum make., emery paste - fine (400 gm pack), carborandum make., painting brush size 4", make raj/ any is., painting brush size 3", make raj/ any is., painting brush size 1", make raj/ any is., old dhoti (5 mtr), hacksaw blade 1/2" x 12", miranda make., teflon tape 3/4", champion make., teflon rod 30mm x 300mm, teflon rod 40mm x 300mm, holdite (500 gm pack), brasso (500 gm pack), restolene (400 gm pack), blue tube, anabond 666, lead wire 1mm, lead wire 3mm, stag b jointing paste,type - b, red complies to bs6956 part 5:1992,temp resistance = -40 c to 650 c (1pack = 1 kg), brass liner size 400mm x 1000mm thickness - 0.1mm, brass liner size 400mm x 1000mm thickness - 0.2mm, brass liner size 400mm x 1000mm thickness - 0.3mm, brass liner size 400mm x 1000mm thickness - 0.5mm, chain pulley block yellow colour chain length = 15 mtr. along with test certificate size 2 ton., professional angle grinder, model - gws 600, power supply 220 230 vac rpm 3000, bosch make., impact drill machine 13mm capacity, 600 watt, model gsb 600, bosch make., wooden planner machine blade tct 82 mm, xtra power make., circular saw machine blade 5 x 40 teeth, xtra power make., circular saw machine blade 5 x 30 teeth, xtra power make., screw driver star type with magnet 10 , taparia make, jamur 9 , taparia make., band saw machine blade 2 , black screw for wooden work 3.5 x 19 mm, black screw for wooden work 3.5 x 30 mm, concrete smart nail gi 1 , concrete smart nail gi 2 , power hacksaw blade, ms nail 2 x 14 no, -do- 1.5 x 14 no, -do- 1 x 14 no, hydraulic door closer, hinge steel (kabja) 4 , -do- 3 , wooden ply 6 x 3 x 6 mm, -do- 6 x 3 x 12 mm, wooden ply board 6 x 3 x 19 mm, table drawer lock, spring steel chisel 6 , spring steel chisel 8 , spring steel chisel 10 , steam coal/ japani bazri, air blower suitable for black smith furnace., aluminum ribbet 3/16 x 1.5 , gi socket , unique make., gi elbow , unique make., gi tee , unique make., gi union , unique make., gi pipe , unique make., gi socket 1 , unique make., gi elbow 1 , unique make., gi tee 1 , unique make., gi union 1 , unique make., ms socket hydraulic tested, ms elbow hydraulic tested, ms tee hydraulic tested, ms union hydraulic tested, ms reducer 3/8 to hydraulic tested, ms blind hydraulic tested, hss drill 3 mm, anderson make., hss drill 4 mm, - do - 5 mm, hss drill 8 mm, - do 10.5 mm, - do - 11 mm, - do - 13 mm, - do 3/8 , - do 1/2 , - do 1 , flat file fine - 14", half round file fine - 14", flat file rough - 14", round file rough - 14", wooden cut file half round 14 , triangular file 6 x 6 mm, grinding wheel green, fine 50 x 38 x 255 mm, sa60j, - do but black, rough, grinding wheel green, fine 50 x 50 x 255 mm, sa

Damper Pulley Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors