Latest data processing equipment Tenders | Government data processing equipment Tenders

State Government

CTN :41150394

05 Aug, 2025 NA

Kolkata - West Bengal

Tender For corrigendum : supply and installation of ac machines and other electrical equipment for the office of wbscvt at room no. 414 of karigari bhawan, rajarhat new town, kolkata -160 - distribution wiring in 1.1 kv grade 2x22/0.3 (1.5 sqmm) single core stranded fr pvc insulated & unsheathed copper wire (brand approved by eic) partly in 20mm size pvc rigid conduit fr (precision make) [for ceiling portion only] and in 19mm bore, 3mm thick polythene pipe [for horizontal & vertical run embedded in wall], with 1x22/0.3 (1.5 sqmm) single core stranded fr pvc insulated & unsheathed copper wire for ecc, to light/fan/call bell points with modular type switch (brand approved by eic) fixed on modular gi switch board complete with 2 no. suitable size ph & n copper bar with top cover plate making earthing attachment fixed on wall incl. mending good damages to original finish. [only pvc rigid conduit on ceiling and remaining portion concealed] (avg run 10 mtr), distribution wiring in 1.1 kv grade 22/0.3 (1.5 sqmm) single core stranded fr pvc insulated & unsheathed copper wire (brand approved by eic) in 20mm size pvc rigid conduit fr (precision make), with 1.1 kv grade 1 x 22/0.3 (1.5 sqmm) single core stranded fr pvc insulated & unsheathed copper wire as ecc, to 6a 3 pin modular type plug socket & switch (brand approved by eic) on 4 module gi switch board with 3/4 module top cover plate on wall incl. necy. connection making earthing attachment, painting and mending good damages to building workson board, supply & fixing 240 v, 6 a, 3 pin modular type plug socket (brand approved by eic) with 6a modular type switch, without plug top on 4 module gi modular type switch board with 3 module top cover plate flushed in wall incl. s&f switch board and cover plate and makingnecy. connections with pvc cu wire and earth continuity wire etc [for laptop charging], supply & fixing 240 v, 3 nos. 16 a, 3 pin modular type plug socket with 3 nos. 16a modular type switch (brand approved by eic), 20a modular switch type sp mcb (c-curve) and indicator without plug top on 2 row 12 module gi modular type switch board with 2 row 12 module top cover plate flushed in wall incl. s&f switch board and cover plate and making necy. connections with pvc cu wire and earth continuity wire etc.[for sound system & projector], distribution wiring in 1.1 kv single core stranded frls pvc insulated & unsheathed copper wire (finolex / havells/ kei / gloster /approved by eic) in suitable size ( 40/32/25 mm ) pvc rigid conduit fr (precision make) incl. necy. fittings as required 2 x 2.5 sqmm + 1 x 1.5sqmm [for power plug ], 2 x 4 sqmm + 1 x 2.5 sqmm [for ac ], 3 x 1.5 sq mm [for 6 amp plug and other ckt], finishing of the pvc insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes. as per g s 2.5 sq mm, 4.0 sq mm, supply & fixing of 250v 50 hz olp- 30a single phase a.c starter ( make -electron, / pwd appvd ) suitable for 1.5 / 2.0 tr airconditioner machine incl s & f suitable size g i box (16 swg) flushed in wall with voltage check, amp check, time check incl. making connection as per direction of eic. [for ac connection], supply & fixing 240 v, 25 a, 3 pin modular type plug socket (brand approved by eic), without plug top and switch with 2 module gi modular type switch board with top cover plate flushed in wall and making necy. connections with pvc cu wire and earth continuity wire etc as per g.s.[for ac connection], supply & fixing 240 v,25 a, 3 pin modular type plug top with indicator (brand approved by eic) & necy. connections.[for ac connection], supply & fixing of 36 w -2 x 2 recess mounted led luminaries made in crca sheet metal with a wider light window and also with an opal acrylic diffuser for a spotless and grade free uniform lighting and the fitting complete with all accessories to crompton make cat no - polaris nio - i lctlrne-36

CTN :41242925

08 Aug, 2025 NA

Udhampur - Jammu And Kashmir

Tender For supply of 86 inch panel , digital podium interactive , 15.6 inch full hd condenser , 20 x 4k ptz camera with video resolution hdmi optional cmos , digital conference system host small to medium digital conference , digital conference system pop-up embedded desk boundary chairman microphone , digital conference system pop-up embedded desk boundary delegate microphone , uhf wireless handheld microphone with transmitter and receiver support upto 12 channels , audio dsp , sitc of usb converter mix and capture two non-hdcp 4k live videos , cable cubby , 6.5 inch 40 w ceiling mount speaker with power tap speaker double unit , 6.5 inch 40 wall mount speaker with power tap speaker double unit , 02 channel 120 w power amplifier , cable and connector for complete installation , installation testing , ups 5kva online ) /bid number : gem/2025/b/6434965 * /dated: 29-07-2025 & & / bid document 1 / 20

CTN :41195401

04 Aug, 2025 20.00 Lacs

Amritsar - Punjab

Tender For supply of ai based health monitoring system d d - vibration sensor , temprature sensor , oil pressure sensor , oil condition monitoring sensor for engine , exhaust sensor to monitor 6 gases and ppm standalone , signal processing gateway and data logger for afv data , ruggedised tablet embedded with ai software and 10.1 inch screen for running algorithm and data ingestion with visualisation of multiple afvs health at the rrcc , ai based machine health monitoring software , customized fixtures and mountings for the sensors. , software

CTN :41229357

06 Aug, 2025 NA

Madurai - Tamil Nadu

Tender For purchase of equipments for embedded system practical for ece dept

CTN :41266529

25 Aug, 2025 NA

Bhiwadi - Rajasthan

Tender For supply of embedded system kit for experiments and testing

State Government

CTN :40985778

11 Aug, 2025 1.80 Crore

Mohali - Punjab

Tender For corrigendum : purchase of sports physiotherpy lab equipments - focused shockwave therapy the device should be suitable for musculoskeletal use. should be a focused shockwave based on piezo mechanism. should have multi array type piezo electric hand piece. should have accuracy of the shock wave generation cycle(frequency)0~8 10% should have software-based operating system the unit should have large color touch screen for ease of operation. the unit should have accuracy of the operating frequency 0~7000shock 10% the unit should have maximum energy density 0.702 m j/ (when setting at 23 levels) 15% should have shock wave penetration depth 40 20%. should have maximum focus size. 78 1.78 15.81 20% should have maximum pressure 44.01 0.65 mpa the unit should be supplied with piezo hand piece and elastomer gel padas of 8 different sizes, 5mm, 10mm, 15mm, 20mm, 25mm, 30mm, 35mm, and 44mm. the life span of hand piece should be of up to 10 million shocks. should be supplied with trolley with castor wheels. dimension of the device should be approximated 500mmx700mmx 1000mm should have ce or usfda certified., high laser therapy should be class iv high level laser therapy system should have a real-time operating system technology should have maximum laser should be class iv high level laser therapy system should have a real-time operating system technology should have maximum laser power output of 15 watts should have wavelengths of 810 nm & 980 nm should have an aiming beam of 650nm, should have 2 operating modes: continuous wave or pulsed applicate and piece should have embedded finger switch and light, should have a technology to customize patient treatment based on conditions, body area, body type, skin type, chronicity and absorption characteristics applicator should have a fused silica composition massage ball at the point of contact of applicator and skin. pulse frequency: 2, 10, 20, 100, 200, 500, 1000, 2500, 5000 & 10000hz pulse duration: 50% duty cycle at any given pulse frequency setting, should have a 10 hd display touch screen with password protection to reach the home screen should be supplied with 2nos. of laser protection glasses power: 100-240v, 50-60 hz the unit should be supplied with 5 different types and sizes of treatment heads (large cone, large massage ball, flat window, small massage ball, and small cone. the unit should have inbuilt battery. electrical safety class: class i, type b weight should not exceed 4 kilograms (main unit; without applicators & accessories. must have class iii also., combination therapy machine with vaccum should have 3 independent electrotherapy channels, one ultrasound channel should provide multiple clinical waveforms including interferential (2 and 4 poles and isoplanarvector), tens (asymmetric biphasic &symmetric biphasic), han, russian, vms, surged(rectangular &triangular), hvpc, microcurrent, galvanic (continuous, interrupted and low level),rabert & dia dynamic cpid/cpiso should have independent parameter adjustments for each channel including intensity, frequency, duty cycle, vector scan, channel mode, phase duration, ramp, cycle time and treatment time based on waveform should have maximum output intensity up to 140ma should have constant current and constant voltage modes should have 2 colour coded lead wires for easy picking of selected channels should have suggested electrode placement guidelines ultrasound should offer 1 and 3 mhz frequencies should have the ultrasound bnr of 5:1 or lesser should be supplied with one 5cm applicator head should have pulsed & continuous frequency modes (10%, 20%, 50% & 100%) should have variable duty cycles of 16 hz, 48 hz &1 bb 00 hz should have facility to indicate applicator uncoupling should be able to use electrotherapy and ultrasound independently and also in synchronizedcombination of electrotherapy and ultrasound, where ultrasound head functioning as bothultrasound head and electrode should have minimum

CTN :41041120

28 Jul, 2025 3.10 Crore

Tirunelveli - Tamil Nadu

Tender For establishment of electric vehicle technology laboratory in 3 government engineering colleges at tirunelveli, dharmapuri and erode - ev emulator platform with bldc motor set up (as per annexure ia), ev bldc motor of 3kw, 3000 rpm, 60v coupled to loading motor with torque sensor and encoder of 1024 ppr for ev emulator platform with a provision to swap the ev motor a loading induction motor of 3kw, 3000 rpm for ev emulator platform with 20 nm torque sensor and following features front end converter for ev emulator platform grid side converter for ev emulator platform ev (lifepo4 )battery pack with bms 100ah,72v [lcl filters for grid side converter ev emulator controller converter for propulsion motor which supports bi-directional power flow vin: 200vdc, vout: 72vac, 150amps; forced air cooling for ev emulator platform dc- dc bidirectional converter for battery for ev emulator platform in: 200-100vdc, & out: 100-200 vdc, 60 amps (buck), 30 amps (boost) inductor for battery side converter 2.3mh,40a for ev emulator platform, two-wheeler electric vehicle complete set up (as per annexure ia), e vehicle - two wheeler -complete set up / working model (bldc-hub) off -road set up pc based measurement & acquisition system for motor voltage and current system with gpu for 2 wheeler set up, four-wheeler electric vehicle complete set up (as per annexure ia), e vehicle - four wheeler -complete set up / working model( pmsm) on -road set up with additional pmsm and sr motors iot & remote monitoring system system with gpu for 4 wheeler set up, battery emulator for charging and discharging (as per annexure ia), battery management system (bms) test set up (as per annexure ia), series hybrid e-mobility training system (as per annexure ia), charging station workbench (as per annexure ia), iot & embedded kit for prototyping & projects (as per annexure ia), ev lab accessories (as per annexure ia), matlab with simulink and automotive related tool boxes with 5 users concurrent license (as per annexure ia), switched reluctance motor 4 kw and drive with reduction gear box coupled to eddy current dynomometer (as per annexure ia)

CTN :41114659

07 Aug, 2025 NA

Baramulla - Jammu And Kashmir

Tender For corrigendum : supply of drone trg lab : - drone flg sml , vr drone sml , drone sensor integration and testing eqpt , gps testing eqpt along with proprietary software , flight controller assembly programming station , battery charging station , battery repair station , drone service tools , 3d printer , 3d scanner , laser machine for engraving and cutting , cnc router machine , fcb and esc training platform , gps training module for embedded platform , thrust measurement training system , battery management training system , drone gimbal training platform , drone training spare parts kit , unassembled drone training part kit , drone sensor trainer kit , advanced microwave integrated circuit platform , antenna training system , esd work bench , camc , flying and technical training

CTN :40903560

28 Jul, 2025 NA

Kutch - Gujarat

Tender For corrigendum : supply of embedded linux based biometric attendance system (v3) (q2)

CTN :41068754

04 Aug, 2025 NA

Khorda - Odisha

Tender For supply of embedded linux based biometric attendance system (v3)

Data Processing Equipment Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government