Get complete information related to latest Dc Cable Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Dc Cable Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Dc Cable Tenders.
Tender For corrigendum : repair/maint of external electric supply system, distribution lt panels with connected items and allied services at other than basistha area under ge guwahati. - excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.5 mtr deep for taking out / laying of under ground cable, pole or stay and getting out in soft soil strata complete all as specified and as directed., returning filling in including spreading leveling watering and well ramming in layers not exceeding 25cms spread any type of soil complete all as specified and as directed., removing excavated materials not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and as directed., supply and lay for dry river sand filling for cable protection with a layer of 8cm deep before laying and 15cm covering above the top edge of cable after laying complete all as specified and as directed. (note : punned thickness shall be measured)., m&l for bricks common burnt clay, building brick, sub class b designation 75 old size bricks laid in trenches flat over sand cushioning for cable protection complete all as specified and as directed., m&l for supply and fixing / laying in replacement, connect, test and commissioning of lt under ground cable xlpe insulated, screened, pvc bedded, galvanised steel strip or wire armoured, electric cable (heavy duty) with multistranded aluminium conductor, 1100 volts grade in trenches/on wall/poles laid in ducts/inside protection pipe of the following cross sectional area including cable glands,lugs and suitable size of ms saddle clips (where ever cable laid in ceilings / walls without cable duct) complete all as specified and as directed.note : manufacturers test certificate shall be submitted alongwith rar/fb to engr-in-charge., (a) 95 sqmm x 3.5 core, (b) 70 sqmm x 3.5 core, (c) 50 sqmm x 3.5 core, (d) 25 sqmm x 3.5 core, supply and fixing in repair, connecting, testing and commissioning mccb in panel etc. mccb, tpn (4 pole), 630 amps, 50ka breaking capacity with overload and thermal tripping feature with magnetic release, 415volts ac, 50hz, icu = 100%, including certain addition or alteration if required at site complete all as specified and directed., supply and fixing in repair, connecting, testing and commissioning mccb in panel etc. mccb, tpn (4 pole), 400 amps, 36 ka breaking capacity with overload and thermal tripping feature with magnetic release, 415volts ac, 50hz, icu = 100%, including certain addition or alteration if required at site complete all as specified and directed., supply and fixing in repair, connecting, testing and commissioning mccb in panel etc. mccb, tpn (4 pole), 250amps, 36ka breaking capacity with overload and thermal tripping feature, 415volts ac, 50hz, icu = 100%, including certain addition or alteration if required at site complete all as specified and directed., supply and fixing in repair, connecting, testing and commissioning mccb in panel etc. mccb, tpn (4 pole), 160amps, 36ka breaking capacity with overload and thermal tripping feature, 415volts ac, 50hz, icu = 100%, including certain addition or alteration if required at site complete all as specified and directed., supply and fixing in repair, connecting, testing and commissioning mccb in panel etc. mccb, tpn (4 pole), 125 amps, 36ka breaking capacity with overload and thermal tripping feature, 415volts ac, 50hz, icu = 100%, including certain addition or alteration if required at site complete all as specified and directed., supply and fixing in repair, connecting, testing and commissioning mccb in panel etc. mccb, 4 pole, 100amps, 26ka breaking capacity with overload and thermal tripping feature, 415volts ac, 50hz, icu = 100%, including certain addition or alteration if required at site complete all as specified and directed., supply and fixing in repair, connecting, testing and commissioning mccb in panel etc. mccb, 4 pole, 63amps, 16 ka breaking
Tender For bid to ras supply of m and l in repair for heat shrinkable straight through jointing kit , supply laying in repairs in trenches ducts fixing , taking out carefully cable covers and ht cable from excavated , relaying of ht cable of size 120 sqmm 3 core in trench , excavation in trenches not exceeding 1.5 mtr wide and 1.5 mtr depth , excavation in trenches not exceeding 1.5 mtr wide and depth , removing excavated materials not exceeding 50 m and depositing where directed , returning filling including spreading levelling watering and well ramming , supply and lay sand cushioning to underground ht cable complete , supply and lay reinforced precast concrete cable cover , lay only precast concrete cover size 450 230 50mm , m and l gi pipe light grade with all fittings , m and l for pcc type c2 40 mm graded stone , s and f of dgset 500 kva 3 phase with cpcb iv norms , xlpe pvc insulated cable 3.5 core 300 sqmm , m and l gi pipe light grade with all fittings complete , earthing with gi earth plate electrode 60 60cm 6 mm buried , taking out carefully existing ber dg set from ekm complex area * /bid number : gem/2026/b/7625309 + /dated: 16-06-2026 ' ' / bid document 1 / 21
Tender For corrigendum : supply of micro circuit digital type ds 1501wen , elect bat 3.6v 11mah ni mh , switch rotary 10 pin , bty 11 mah 3.6v 11 mah ni mh , vicor modi dcdc , cable assy co axial a4 a2
Tender For supply, installation, commissioning and configuration of server with all network items - supply, installation & configuration of os based server, server model: gen11 or above (tower server or rack server), processor: intel xeon bronze 3408u, 8-core, 1.8 ghz, 125w or above, memory (ram): 32gb ddr5 (1×32gb, 4800 mt/s) or above, expandable, storage controller: embedded 8 sata ports controller with intel® raid, storage: 960gb sata 6g read intensive sff ssd or above, drive bays: 8 sff (small form factor), network: integrated 2 x 1gbe ports (bcm5720), expansion slots: pcie gen5 -2 × x16 slots, power supply: 800w flex slot platinum hot plug psu, cooling: 2 standard non-hot-plug fans, management: ilo (integrated lights-out) with intelligent provisioning, security: tpm 2.0 (trusted platform module), accessories: usb international keyboard & mouse kit, form factor: tower (4.5u) or rack server, 1.92 tb sata 6g read intensive sfp bc multi-vendor ssd or more, warranty: 3 years or above, supply of l3 lite managed switch preferably d-link - 28 port, (or should be compatible with existing lan/vlan configuration of hef unit), supply of 6 u network rack, supply of cat 6 armoured cable - 305 mtr/box, supply of ofc-6 core single mode, supply of sfp module (trans receiver) single mode - 10 g, supply of cat 6 patch core, supply of hdpe pipe to lay fo cable, supply of i/o, face plate, back box and installation, fixing of armoured cables at various locations as per details - a given below, installation services -- server mounting and installation in rack, l3 switches installation, mounting and configuration, io crimping, back box fixing, switch side labelling, numbering, splicing, digging, trenching of soft and hard soil along with road side 3550 mtrs cutting, filling and laying of ofc cable with hdpe pipe
Tender For corrigendum : supply of electrical and electronics items : : - charge controller , multi strand double core copper flexible cable 2.5 sq mm , copper cable single core multi strand 4 sq mm f.r. , copper cable single core multi strand dccable 4 sq mm , bulb led , pin lugs 2.5 sq mm , pin lugs 4 sq mm , ring lugs 10 sq mm , connector mc 4 , inverter , dc db , acdb , ss hexa nut and bolt with washer 4 mm x 20 mm , ss hexa nut and bolt with washer 10 mm x 40 mm , ss hexa nut and bolt with washer 10 mm x 60 mm , allen bolt with spring washer m10 x 40 mm , monorail 40 mm x 40 mm x 2 mm , microrail 100 mm x 300 mm x 2 mm
Tender For supply of 1 . 85065211150 antenna for motorola xir p8668i vhf hand setmake motorola only. , 2 . 85065211290 internal speaker for motorola gp338 vhf set make motorola only. , 3 . 85065211300 belt clip for motorola gp338 vhf set make motorola only. , 4 . 85065211310 display assemblyfor motorola gp338 vhf set make motorola only. , 5 . 85065211320 cabinet without lcd display for motorola gp338 vhf set make motorola only. , 6 . 85065211330 video strip for motorola gp 338 vhf set make motorola only. , 7 . 85065211340 audio strip for motorola gp338 vhf set make motorola only. , 8 . 85065211220 dccable st for motorola gm338 vhf stn part no hkn 4137a make motorola only. , 9 . 85065211260 ptt switch with pad for motorola gp338 part no 1386324z01 by 7586265z02 make motorola only. , 10 . 85065211270 key pad for motorola gp338 part no 7580532z01 make motorola only. , 11 . 86592000120 external voice recording unit for emergency alarm system along with required cable , 12 . 82200201200 outdoor type rg 217 rf cable with following , 13 . 82201010800 high gain antena with its mounting arrangement and accessories , 14 . 82201011300 antenna suitable for motorola vhf handset model gp338 by gp 328 make motorola only. , 15 . 85065211280 lcd display with suitable connecting ribbon cable or any accessory to connect in the motherboard for motorola gp338 vhf set , 16 . 82200201210 male end connector for vhf rg 217 coaxial cable. , 17 . 82202001050 microphone for vhf fixed base station complete with spiral chord and connector suitable for motorola gm338 fixed analog base station. , 18 . 85005065010 ni-cd battery 7.2 v nickel-metal hydride battery suitable for motorola vhf handset model gp338 make motorola only. , 19 . 85065211240 volume knob for motorola gp338 vhf handset make motorola only. , 20 . 85065211250 channel knob for motorola gp338 vhf handset make motorola only. , 21 . 82201010970 duplexer suitable for motorola slr5300-50 w digital vhf repeaters by cdr 300 50 w analog repeater with all accessories
Tender For bid to ras supply of electrical item c c - bore bent to shape as required at site , supply and fixing of sub main wiring with three core 1.5 sqmm multi stranded copper conductor pvc insulated unsheathed frls cable 1100 volts grade , supply and fixing of solar street light fitting 12 watt having high efficiency mono crystalline solar pv module, lithium ferro phosphate battery with in-built bms technology, high efficacy led , supply and fixing of solar street light fitting 16 watt having high efficiency mono crystalline solar pv module, lithium ferro phosphate battery with in-built bms technology, high efficacy led , supply and fixing of solar street light fitting 20 watt having high efficiency mono crystalline solar pv module, lithium ferro phosphate battery with in-built bms technology, high efficacy led , supply and errection in replacement of steel tubular swaged pole 8.5 m long type 410-sp-22 complete with cl base plate , m and l for pcc 1-3-6 type c2 using 40mm graded aggregate crushed stone aggregate as in pole foundation, filling and mass concrete complete all as specified and directed. , m and l for plain cement concrete 1-2-4 type b1 using 20mm graded stone aggregate , supply of paint and painting of steel pole swan neck type or straight type up to 9 mtr height with two coat of aluminium paint after scratching out old paint , supply, erect and commissioning of high galvanized mast light of height 15 mtr, suitable for 6 to 9 lantern symmetrically fitted along with their control gear , m and l for boring of horizontal hole under road, pavement, hardstanding suitable for passing through upto 50mm bore complete all specified and directed. , replacement of unserviceable wire by cable from junction box to light fitting fixed on pole on existing pvc conduit by pvc insulated unsheathed copper conductor frls of 1.5 sqmm three core. , supply of laying and digging excavation in trenches n exc 1.5 wide and n exc 1.5 m in depth for foundation etc , returning filling in including spreading, leveling, watering and well ramming in layers n exc 25 cm complete all as specified and as directed , supply of digging and laying removal of excavated material by surplus soil to a distance n exc 50m and depositing where directed at a level n exc 50m above the starting point , supply and laying sand in trenches for protection of cable, sand cushioning to cable 8 cm thick below cable and 15 cm thick above cable in layers complete all as specified and as directed , supply and lay fly ash bricks best quality, laid in trenches, perpendicular to ug cable for cable protection complete all as specified and directed , laying only old bricks obtained from item no 13 perpandicular to ug cable for cable protection complete all as specified and directed. //bid details 2 / 35