Get complete information related to latest Dc Welding Machine Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Dc Welding Machine Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Dc Welding Machine Tenders.
Tender For design, supply, erection, installation and commissioning of inverter based mig mag syne rgic pulse welding plant 400 amp as per the attached the technical specifications [ warranty period: 30 months after the date of delivery ]
Tender For supply, installation and commissioning of complete set of mig/mag synergy welding plant ba sed on pulse technology with accessories as per attached technical specification. [ warranty period: 30 months after the date of delivery ]
Tender For hiring of machinery - hydraulic excavator of 1 cum bucket, tractor trolly, smooth wheeled roller 8 tonne, vibratory roller 8 tone, water supply tanker of 5000 liter capacity, concrete mixer 0.4/0.28 cum, hire charges of concrete mixer 0.14 cubic metre, vibrator (needle type 40 mm), surface vibrator, welding by gas plant, welding by electric plant, water tanker 6 kl capacity
Tender For corrigendum : custom bid for services - recertification of as9100d for sukhoi engine division-manufacture and overhauling of al31fp aero engine, its components assemblies, spares and, overhauling of accessories., b. the following shops of sed koraput:, 1. process shop, (i) heat treatment shop, (ii) electroplating shop, 2. manufacturing and overhauling shop, (i) gear box casing shop, (ii) turbine shop, (iii) compressor shop, (iv) sheet metal, welding and special equipment shop, (v) fuel & small parts shop, (vi) blade shop, (vii) cnc shop, (viii) aggregate overhaul shop, 3. assembly and testing shop, (i) assembly shop, (ii) test house, 4. quality and mangement process, (i) quality engineering and defect investigation cell, (ii) manufacturing and overhaul inspection, (iii) stores inspection, (iv) standard room, (v) assembly and testing inspection, (vi) aggegate inspection, 5. production engineering, (i) methods engineering, (ii) production, planning and scheduling, (iii) outsourcing, 6. services, (i) customer services, (ii) information technology, (iii) plant maintenance, 7. integrated material mangement, (i) purchase, (ii) stores, (iii) material control, 8. human resource development, (i) training and development.
Tender For corrigendum : supply of goods, tools & equipmentforan international standard itot in fitter tradeat iti tarsali, gujarat, india (package 4: fitter trade) - ss and sc center lathe (all geared) , design, supply, installation, commissioning, testing and training of hydraulic / electro-hydraulic/ analysis and control of hydraulics. , design, supply, installation, commissioning, testing and training of pneumatic / electro-pneumatic/ analysis and control of pneumatic. , design, supply, installation, commissioning, testing and training of advance factory automation training kits , application learning systems , hydraulic power saw machine , cnc turn centre , universal milling machine with minimum specification , vertical milling machine , cnc machining centre , cnc milling tools to suit above machine (sl. no. 187): to accommodate face cutter, shell end mill cutter, taper shank and parallel shank drills/cutters, reamers. taps with suitable tool holders. , surface grinding machine , universal tool and cutter grinding machine , interchangeable ratchet socket set , hand reamer adjustable cover , hand reamer taper , reamer parallel , set combination , micrometer (0-25) , micrometer (25-50) , micrometer (50-75) , micrometer inside (0-25) , vernier calliper (150mm) , vernier height gauges , vernier bevel protractor , drill twist taper shank , drill chuck , wheel dresser , machine vice (4 inch) , machine vice (6 inch) , sleeve drill morse , bench vice , leg vice , dial test indicator , lathe tools hss tipped set , lathe tools bit hss , counter boring and counter sinking tool , arm strong type bit holder rh , arm strong type bit holder lh , arm strong type bit holder straight , straight edge , surface plate , marking table , universal scribing block , v- block pair , square adjustable , angle plate , spirit level , portable hand drill (electric) , twist drill straight shank , twist drill straight shank , taps and dies complete set , taps and dies complete set , taps and dies complete set in box , pipe wrench , pipe wrench , pipe vice , adjustable pipe tap set bsp with die set cover pipe size , wheel dresser(1for4units) , machine vice , machine vice , sleeve drill (morse taper) , bench vice , leg vice , gauge slip as johnson metric set , carbide wear block , gauge snaps , gauge plug single ended , gauge telescopic , dial vernier caliper , vernier micrometer , depth micrometer , vernier caliper , comparators stand with dial indicator , surface roughness comparison plates , digital vernier caliper , digital outside micrometer , digital dial test indicator , hardness tester , flat tongs , round tongs , straight snips , bend snips , solder bit /soldering iron hatchet type , anvil , swage block , trammel , hand groover , portable forge with hand blower , gas cutting torch with different noses , arc welding table with positioner , gas welding table with fire bricks , grinding attachment for lathe , dial test indicator , sine bar , sine bar , micron suitable to measure minimum 300mm distance. (optional) , surface roughness tester , air conditioner , drilling machine pillar type with drill chuck & key. , pedestal grinder double end type. , power saw machine stroke length160 mm , fly press 4t capacity , arc welding transformer-single phase,200 amps. (with cable, electrode holder and all other accessories) , oxy-acetylene gas welding plant with all accessories , tig weldingmachine , co-ordinate measuring machine having accuracy of 5 , workbench , special tools and equipment , tool holder to suit the cnc machine (sl. no. 183) for turning, threading (external &internal), grooving (external &internal), parting off operations, drilling, boring, undercutting (with 20 inserts for each operation) , worktable to mount small machines , worktable to mount small machines , worktable to mount small machines , work benches with bench vices , dg set (power backup) , engineering drawing trainees tool kit , air conditioning for classroom , air conditio
Tender For custom bid for services - operation and maintenance of mobile equipment at nsl for a period of 01 year in 3 mtpa isp at nagarnar near jagdalpur, chhattisgarh state-nmdc steel limited has setup up a 3.0 mtpa integrated steel plant at nagarnar, chhattisgarh with coke oven, sinter plant, blast furnace, steel melting shop, thin slab caster, hot strip mill route and other auxiliary units- 2. contractor s scope of work/supply/responsibility: brief description of scope of work (not limited to) needs to be carried out by successful bidder 1. to carry out operation of mobile equipment as mentioned in annexure a by deputing skilled, qualified and experienced manpower. 2. to carry out maintenance of mobile equipment as mentioned in annexure b by deputing skilled, qualified and experienced manpower. 3. to maintain and operate the effluent treatment plant specially made for fmd as per environmental norms. 4. deployment of at-least the prescribed minimum strength of experienced manpower as indicated in clause no. 5.0 to successfully execute the operation & maintenance activities, with a provision to keep reserve in each manpower-category (if required) to meet the minimum daily requirement for round the clock operation and maintenance. 5. all the tools tackles and special tools including diagnostic tools like: mechanic tools, electrician tools, welder tools, tyre fitter tools, special tools, lifting tools, hydraulic pressure testing kit etc. required for operation & maintenance and repair of mobile equipment is in bidder s scope. separate tools should be available for site maintenance team and shop floor team. all tools and tackles should be tested and certified by third party. 6. all the shift personnel will report to respective shift supervisor of the successful bidder administratively. the shift supervisor shall be decided by bidder in consultation with nsl. bidder shall organize all the jobs of o&m with the help of their supervisors/ engineer and they shall coordinate continuously with nsl to carry out the operation and maintenance activities. 7. operation and maintenance of mobile equipment shall be carried out on 24 x 7 basis including sundays and holidays on a shift-wise basis (four shifts [a, b, c & g]. i. for operation: 1.operation of all the equipment will be in all shifts as and when required as listed in annexure a. 2.inspection report of vehicle will be prepared by bidder and approval of the same will be obtained from nsl. a.preventive maintenance: 1. checking/ adding/ replacing engine oil, hydraulic oil, brake oil, def level etc.; 2. checking and cleaning oil filter; 3. checking and adding/replacing engine coolant as the case may be; 4. checking fuel level and adding fuel if required; 5. checking and cleaning of fuel and air filters; 6. checking hydraulic filters, hoses, seal, o-ring etc.; 7. checking electrical switches, relay, fuse, bulb etc.; 8. battery charge level checking and charging & battery maintenance/cleaning; 9. checking all the safety devices like back horn, seat belt, camera, beacon light etc.; 10. check air pressure in tyre and check wheel nut tightness; 11. checking and adjustment of transmission, alternator and other belts and chain drive; 12. cleaning and washing of the vehicles; 13. maintaining good housekeeping of washing ram; 14. cleaning of operator/driver cabin; 15. greasing in all points; 16. apply cardium compound on wire rope/crane rope; 17. any other activity as required. b. periodic maintenance 1. engine oil change; 2. replacing fuel filter; 3. replacing oil filter; 4. changing of air filter kit; 5. change of steering filter; 6. gear box oil change; 7. rear axle oil change; 8. power steering oil change; 9. replacement of coolant; 10. carrying out tyre inflation and repair; 11. welding and gas cutting works; 12. housekeeping work of the repair shop; 13. cleaning and washing of the vehicles. c.breakdown maintenance: in case of breakdown of any mobile equipment as listed in annexure
Tender For handling and positioning of raw materials, housekeeping and machine cleaning at foundry-1 910002479 supply of usw for handling & positioning of raw materials and house keeping & machine cleaning in foundry: assistance in moulding section in all shifts. mixing,shifting and positioning of moulding sand and other operational consumbles of moulding section including material collection from stores. 6,666.000 mdy,. 2 910002480 supply of usw for handling & positioning of raw materials and house keeping & machine cleaning in foundry:cleaning and spillage removal of sand plant area; both over and underground; including 22 nos belt conveyors, 8 nos bucket elevators,sand aerators, mix mullers etc including tunnels 1,818.000 mdy, 3 910002481 supply of usw for handling & positioning of raw materials and house keeping & machine cleaning in foundry: housekeeping and m/c cleaning and spillage removal of moulding machines, tool room m/cs, de systems like scrubbers,cyclone,bag filters etc and other connected equipment 1,212.000 mdy, 4 910002482 supply of usw for handling & positioning of raw materials and house keeping & machine cleaning in foundry: assistance and cleaning at pattern shop including cleaning of m/cs and shop floor and house keeping in pattern storage area and designated areas outside pattern shop 1,212.000 mdy, 5 910002483 supply of usw for handling & positioning of raw materials and house keeping & machine cleaning in foundry: cleaning and house keeping at moulding and melting areas including material storage areas in all five bays( an area of 11,232 sq mtrs) and cleaning of office buildings 1,818.000 mdy, 6 910002484 supply of sw for welding and fabrication works including gas cutting and welding for mould box repair, mould box reinforcement and spillage metal removal from mould boxes and reuse of boxes 1,818.000 mdy, 7 910002485 supervisor:(to supervise all the above jobs and to co ordinate with the engineer or his representative for daily works and deployment) 606.000 mdy, 8 910002478 supply of usw for handling & positioning of raw materials and house keeping & machine cleaning in foundry: assistance in melting section in all shifts, cleaning of ladles,ingot mould assembly and other connected melting jobs including collection of materials from other departments and stores etc. 4,242.000 mdy.