Latest dcp fire extinguisher Tenders | Government dcp fire extinguisher Tenders

State Government

CTN :45699712

15 Jul, 2026 14.12 Lacs

Korba - Chhattisgarh

Tender For procurement of complete assembly and spares of branch isolation valves of size 250nb for ash evacuation system installed at ah-ii, 1x500 mw, htps, korba west. - work of condenser tube cleaning using high pressure water jet and special design phosphor bronze bullet of 500 mw, htps, korba west. procurement of flexible fire fighting delivery hose type-3 and ss short branch for fire fighting and ah-ii, div., korba west. procurement of complete assembly and spares of branch isolation valves of size 250nb for ash evacuation system installed at ah-ii, 1x500 mw, htps, kw. procurement of various size of non-metallic gland packing for htps, kw and 1x500 mw, htps, kw. procurement of abc type dcp fire extinguisher having squeeze grip operation for fire fighting div., htps, korba west.

CTN :45676692

09 Jul, 2026 NA

Chennai - Tamil Nadu

Tender For purchase of fire safety and fighting laboratory equipment for fts department - purchase of fire safety and fighting laboratory equipment for fts department, cleveland open cup (coc) apparatus standard compliance: astm d92 / is 1448 (part 69) test method: open cup flash and fire point determination test cup: brass, precision machined with heat resistant handle heater: electric heater (1000 w 10% nickel chromium) with variable control heating rate: 5 c per minute (as per standard) temperature range: (-6 to 400) c thermometer: astm 11c or equivalent flame applicator: gas test flame with fine control valve body: stainless steel housing display: analog / digital temperature indicator power supply: 230v ac, 50 hzsafety: overheat protection heat insulation, pensky-martens closed cup apparatus standard compliance: astm d93 / is 1448 (part 21) type: pensky-martens closed cup (motorized, digital type preferred) test cup: brass cup diameter: 50.7 50.8 mm capacity: minimum 70 ml stirring system: heater: electric heater 650 w 10% heating rate: 1 12 c/min adjustableignition:pilot flame with automatic shutter mechanismtemperature measurement:thermometer or digital sensor (ip-28c or astm)digital temperature displaypower supply:230v ac, 50 hzsafety: over-temperature cut-off flame safety control

CTN :45696125

13 Jul, 2026 NA

Palacode - Tamil Nadu

Tender For supply of equipment for mechanical engineering department - supply of equipment for mechanical engineering department, lathe machine :specification :bed: 2v & 2 flat, induction hardened and ground minimum bed length: 1375 mm bed width: 240 mm capacity: height of centre: 165 mm swing over bed: 320 mm swing over gap: 510 mm swing over cross slide: 180 mm distance between centres: 650 mm slides: cross slide travel: 200 mm compound slide travel: 115 mm spindle: spindle bore: 40 mm spindle nose: thread type, 62 mm spindle taper: mt-3 tail stock: quill diameter: 38.1 mm taper: mt-3 travel: 120 mm speed: no. of speeds: minimum 8 range: (40 800 )rpm threading: metric: (1 6 )mm (min 13 steps) english: (2 24 )tpi (min 19 steps) lead screw: (1 4) tpi electrical: motor: 1.5 hp, 230v/415v, 50 hz drive: v-belt structure: bed: close-grained cast iron (fg 260) gears: hardened steel base: rigid cast iron stand , open cup apparatus :specification :standard compliance: astm d92 / is 1448 (part 69) test method: open cup flash and fire point determination test cup: brass, precision machined with heat resistant handle heater: electric heater (1000 w 10% nickel chromium) with variable control heating rate: 5 6 c per minute (as per standard) temperature range: -6 to 400 c thermometer: astm 11c or equivalent flame applicator: gas test flame with fine control valvebody: stainless steel housing display: analog / digital temperature indicator power supply: 230v ac, 50 hz safety: overheat protection heat insulation , closed cup apparatus :specification :standard compliance: astm d93 / is 1448 (part 21) test cup:brass cup diameter: 50.7 50.8 mm capacity: minimum 70 ml stirring system heater: electric heater 650 w 10% heating rate: 1 12 c/min adjustable ignition: pilot flame with automatic shutter mechanism temperature measurement: thermometer or digital sensor(ip-28c or astm) display: digital temperature display power supply: 230v ac, 50 hz safety:over-temperature cut-off flame safety control , tail stock assembly :specification :medium-duty tailstock assembly for dismantling & assembly quill stroke: minimum 75 mm taper: mt-3 (preferred standard) feed: hand wheel operated features: set-over screws for taper turning spindle locking arrangement body: cast iron (fg 260) spindle: hardened steel, slip gauge :specification :set size: m87 (87 pieces) or equivalent range: 1.001 mm to 100 mm step sizes: 0.001 mm 0.005 mm 0.01 mm material: high-grade alloy steel / tungsten carbide (preferred) hardness: hrc 63 65 accuracy: grade: grade 1 or grade 2 flatne flatness / parallelism: 0.5 m stored in protective wooden boxes to prevent wear; calibration grades include charts for exact sizes , dc motor:specification :type: dc shunt motor (dismantling model) power: minimum 0.5 hp voltage: 220 v dc speed: 1500 rpm poles: 4 pole construction: laminated stator salient poles accessible armature features: cut section / open type suitable for dismantling and reassembly, hydraulic cylinder :specification :bore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steel calibration grades include charts for exact sizes supply: mounted on training base suitable for dismantling and inspection , hydraulic operated directional control valves (dcv):specification :type: manual spool type dc valve configuration: 4/2 way size: ng06 (cetop 3) rated pressure: 210 bar flow capacity: 20 40 lpm body: hardened steel / cast steel spool: ground and hardened ports: clearly marked (p, a, b, t) supply: mounted on training plate suitable for dismantling and study , bearing with shaft assembly :specification :bore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steelsupply:mounted on training base suitable for dismantling and inspection , coupling unit using driving and dr

State Government

CTN :45699710

17 Jul, 2026 13.60 Lacs

Korba - Chhattisgarh

Tender For procurement of abc type dcp fire extinguisher having squeeze grip operation for fire fighting div., htps, korba west.

CTN :45679037

06 Jul, 2026 NA

Coimbatore - Tamil Nadu

Tender For supply of assistance for safety and mech services , maintenance of dcp fire extinguisher 9kg , servicing of fire extinguisher 25kg and 75kg , servicing of fire extinguisher 1kg to 4 5kg , refilling of co2 gas 2kg to 6 8kg , refilling of fire extinguisher 9kg , dcmp mock drill arrangements , foam pourer testing , hydrotesting fire hose , supply of dry chemical powder , supply and fixing hose dcp 9kg , fabrication welding and erection of structural steel , supply and installation safety clip and safety pin , supply and installation discharge hose for 25kg dcp , supply and installation discharge hose for 75kg dcp , supply and installation discharge hose for 4 5kg co2 dcp , supply and installation discharge horn 4 5kg co2 dcp , supply and installation discharge horn 2kg co2 dcp , ultrasonic testing of fire extinguisher , supply and installation luminous wind sock , supply and installation connecting hose , servicing of sprinkler nozzle , servicing of fire hose , welding of pipe all dia , supply and installation of butterfly valve , supply and installation coupling washer , cleaning of strainer 6 inches and above product line , cleaning of strainer upto 6 inches product line , supply and installation of 80mm ci butterfly valve , supply of spark arrestor , supply of fire hose 15mt , supply and installation of sprinkler nozzles , supply and installation fire hose box glass , supply of jet nozzle , supply and installation of hose box , refilling of clean agent cylinder , supply and installation of hydrant cap , cleaning of strainer upto 6 inches for hydrant lines , cleaning of strainer 6 inches and above for hydrant lines , additional manpower assistance , hydrotesting of pipeline , supply application and wrapping for underground pipeline , testing and calibration of tsv and srv , testing and servicing of pv vent 3 inch , testing and servicing of pv vent 6 inch , hiring of hydra crane , pipe modification product drain , hiring of jcb , supply and installation of gland rope for valves , supply and filling of silica gel , hydrotesting of unloading hose , cleaning and greasing of gate valve upto and including 6 inches , cleaning and greasing of gate valve 8 inch and above , servicing of gear operated valves , maintenance of swing ladder , repairing of swivel joint , supply and installation of bolt and nuts , supply and installation of gasket sheet , supply of structural steel erection aligment and welding , refilling of scaba cylinder 200bar and 300bar , product tank cleaning ag tank , removing of dead stock ag and ug tanks , product tank cleaning ug tank , servicing of deluge valve , dismantling of structure , repairing of dcv , fire extinguisher sticker , foam pick up tube , 9kg abc stored pressure operating valve , sply fixg of pressure gauge , calib pressure guage 0 30psi 5 psi

corporations/Associations/Others

CTN :45667085

29 Jun, 2026 NA

Faridabad - Haryana

Tender For fire work at esic haryana. - (a) supplying, installation, testing and commissioning of electric driven main fire pump suitable for automatic operation and consisting of following, complete in all respects, as required :(b) horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal conforming to is 1520.(c) suitable hp squirrel cage induction motor, tefc, synchronous speed 1500 rpm, suitable for operation on 415 volts, 3 phase 50 hz, ac supply with ip 55 protection for enclosure, horizontal foot mounted typewith class-f insulation, conforming to is-325.(d) m.s. fabricated common base plate, coupling, coupling guard, foundation bolts etc. as required.(e) suitable cement concrete foundation duly plasteredwith anti vibration pads., 2280 lpm at 70 m head, (a) supplying, installation, testing and commissioning of diesel engine driven main fire pump suitable for automatic operation and consisting of following, complete in all respects, as required:(diesel driven pump)(b) horizontal type, multistage, centrifugal pump of cast of iron body and bronze impeller with stainless steel shaft, mechanical seal conforming to is 1520.(c) suitable hp, 1500 rpm water cooled with radiator, diesel engine conforming to relevant is standard complete with auto starting mechanism, 12 /24 volts electric starting equipment, diesel tank, exhaust pipe extended upto 10 m outside pump house duly insulatedwith 50 mm thick glass wool with 1.0 mm thick aluminium sheet cladding, residential silencer, instruments and protection as per standard specification, stop solenoid for auto stop in the event offault with audio indications, painted with post office red colour etc. as required.(d) m.s fabricated, common base plate, coupling, couplingguard, foundation bolts etc. as required.(e)suitable cement concrete foundation duly plasteredand with anti vibration pads., 2280 lpm at 70 m head, (a) supplying, installation, testing and commissioning of electric driven pressurisation pump suitable for automatic operation and consisting of following, complete in all respects, as required : (jockey pump)(b)horizontal type, multistage, centrifugal pump of cast iron body and bronze impeller with stainless steel shaft, mechanical seal conforming to is : 1520.(c) suitable hp squirell cage induction motor tefc type suitable for operation on 415 volts, 3 phase 50 hz ac supply with ip 55 class of protection for enclosure, horizontal foot mounted type with class-f insulation, conforming to is : 325.(d) m.s.fabricated common base plate, coupling, coupling guard, foundation bolts etc. as required.(e) suitable cement concrete foundation duly plastered and with anti vibration pads., 180 lpm @70m head, fabrication, supply, insallation testing & commissioning of electrical control panel of cubical construction, floor mounted type, fabricated out of 2mm thick crca sheet, compartmentalised with hinged lockable doors, dust and vermin proof, powder coated of approved shade after 7 tank treatment process, cable alley, interconnection with suitable size copper conductor cable/solid copper strip, having switchgears and accessories, mountings and internal wiring, earth terminals, numbering etc. complete in all respect, suitable for main fire pump, pressurisation pump & diesel pump set complete as per cpwd specification with following in coming and outgoings, suitable for operation on 415v, 3 phase, 50hz ac supply with enclosure protection class ip 42 as required :, incomings630a, 50ka 4 pole mccb, ics=100% icu rating digital voltmeter 0-500v with selector switch ammeter (0-630 a) with selector swtich & cts etc. led type ryb phase indicating lamps, on, off, trip indicating lamps set of copper bus bar 800amps outgoings (note : all outgoing feeders for pumps should have digital ammeter with selector switches, and led type on, off, trip indicating lamps)main fire pump200 amp, 50ka tpn mccb, ics=100% icu, with f

CTN :45419374

26 Jun, 2026 NA

Dantewada - Chhattisgarh

Tender For corrigendum : supply of computer , stock register , microwave , refrigerator , packing material for storage , sample reports , juicer mixer , basic knives set , weighing scale , measuring spoons and cups , bowls , scales , whisker , rolling pin , spoons , measuring spoons and jugs , sieves and relevant tools , fitments , hot cabinet , serveries , cleaning and sanitizing equipment , sample of escalation matrix , organisation structure , handouts of ipr guidelines , safety glasses , head protection , rubber gloves , safety footwear , warning signs and tapes , fire extinguisher , first aid kit , different types of linen , tableware , cutlery , crockery , napkin , table , chair , sample feedback form , bill book , card swiping machine , glassware , whiteboard , flip chart , duster , projector , projector screen , laptop , training kit , participant handbook and sops , markers , chalk box , electric induction , lpg cylinder , work station , tandoor , oven , deep fat fryer , kitchen work table , kitchen rack , dry storage cabinet , exhaust and fresh air fans , fly killer , steel stock pot , steel sauce pan , steel omelet pan , iron work , piping bags , slicer , whisk , muffins mould , tartlet mould , pie mould , bread mould , chopping board , steel skimmer , steel turner , steel ladle , steel rice colander , steel strainer , caramel custard mould , baking tray , ss storage tray , rotary cake stand , plastic crates , tandoor seekhs , parat , pizza cutter , ss katoris , tawa with handle , masala box , ac * /bid number : gem/2026/b/7600742 + /dated: 03-06-2026 ' ' / bid document 1 / 67

CTN :45575174

01 Jul, 2026 2.20 Lacs

Coimbatore - Tamil Nadu

Tender For supply of lab equipments for fire technology and safety engg. dept. - list of items:supply oflab equipments (for specification details refer notice inviting tender), respiratory protection equipment (detailed specification enclosed), hand skin protection equipment(chemical resistant gloves)(detailed specification enclosed), eye protection equipment(safety goggles) (detailed specification enclosed), protective clothing (lab coats demonstration purpose) (detailed specification enclosed), multi gas detector (detailed specification enclosed), chemical safety and eye wash shower (detailed specification enclosed), eye wash cup (detailed specification enclosed), friction sensitiveness tester (detailed specification enclosed), first aid box (detailed specification enclosed), first aid dressing kit bandages andslings (detailed specification enclosed), first aid blanket / emergencyblanket (detailed specification enclosed), patient transport chair (detailed specification enclosed), cpr training manikin (adult) (detailed specification enclosed), personal protective equipments (detailed specification enclosed), respiratory ppe (detailed specification enclosed), scba self contained breathingapparatus (detailed specification enclosed), safety harness (full body harness) (detailed specification enclosed)

Private Sector

CTN :45579123

26 Jun, 2026 NA

Jhajjar - Haryana

Tender For m6813636006 dcp fire extinguisher co2 cartridge type , m6813140014 co2 fire extinguisher 9 kg , m6813566005 is: 15683-fire extinguiser: cap-9kg

State Government

CTN :45525630

02 Jul, 2026 NA

North 24 Paragana - West Bengal

Tender For annual rate contract for hydrotesting, painting, refilling and servicing of co2 fire extinguishers and dcp fire extinguishers installed at various cng stations, decompression facility, quick response vehicles and offices of bgcl in kolkata

Dcp Fire Extinguisher Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

corporations/Associations/Others

Private Sector

State Government