Latest deburring tool Tenders | Government deburring tool Tenders

Central Government And Public Sector

CTN :45037392

28 May, 2026 NA

Bangalore - Karnataka

Tender For (1) design, manufacture, supply, erection, testing and commissioning of 5 ton eot crane for extension of wheelset stacking area of assembly as per rwf technical specification no.rwf/m&p/assy/2025/5 t eot crane enclosed. (2) maintenance spares as per schedule-iv and additional spares and items viz. slings / lifting tackles as per schedule-i of specification. (3) any other essential spares for two years normal maintenance to cover the complete range of mechanical, hydraulic and electrical equipment as per clause 1.3 of specification. (4) maintenance tools as per schedule v of specification. (5) any other accessory treated asconcomitant accessory. ]

State Government

CTN :45289480

30 May, 2026 NA

Palamau - Jharkhand

Tender For renovation of electro mechanical items for rural ws scheme, lesliganj - part a (raw water p/plant mali river at sitadih ), cost towards repairing and overhauling of 50 h.p. v.t. pump set multiple stage ball assembly s/f impeller g.m. bush as per sample 5 nos each, s/f housing bush as per sample. replace in spider rubber cutless bush 5 nos, replacing of 25mm dia. 5 feet long s.s. line shaft 4 nos with s.s. socket . transportation charge from site to work shop vice versa including tools tackles and labour charges for lifting & lowering v.t. pump before and after repairing work etc all complete at pumping plant., supplying all labour tools and tackles for complete opening, dismantling , cleaning of its slots of stator by brush & petrol then complete rewinding of 50 h.p. 440 volts, 50 c/s, star delta, 3 phase hollow shaft v.t. motor by supplying super enameled copper wire & binding, tapping varnishing, heating, testing on full load and repairing of stator & rotor, changing of bearings as per sample skf make with including the deduction of cost of burnt copper wires and transportation charges from p/plant to workshop and back to the same . including tools & tackles and labour charges etc all complete at p/plant., cost towards repairing/ replacement of 200 amp motor control panel board consisting of incoming feeder mccb 200 amp 1 no. and outgoing feeder mccb 100 amp 2 nos, timer 1 no., thermal over load release relay 2 nos. supplying and fitting of digital volt meter (0-500v) squared type 2 nos, ammeter (0-125amp) squared type 2 nos and replacement of phase indicator lamp 3 nos. including internal wiring etc all complete., cost towards supplying & fitting 35 mm2 3 core copper conductor 15 mtr panel to motor., cost towards supplying & fitting 60 watt led street light (jsor-m840), part b (clear water lesliganj.), cost towards repairing/ replacement of 200 amp motor control panel board consisting of incoming feeder mccb 200 amp 1 no. and outgoing feeder mccb 100 amp 3 nos, timer 1 no., thermal over load release relay 3 nos. supplying and fitting of digital volt meter (0-500v) squared type 2 nos, ammeter (0-125amp) squared type 2 nos and replacement of phase indicator lamp 3 nos. including internal wiring etc all complete., supplying all labour tools and tackles for complete opening, dismantling , cleaning of its slots of stator by brush & petrol then complete rewinding of 20 h.p. 440 volts, 50 c/s, star delta, 3 phase induction motor by supplying super enameled copper wire & then tapping varnishing, heating & testing on full load and repairing of stator & rotor, changing of bearings as per sample skf make with including the deduction of cost of burnt copper wires and transportation charges from p/plant to workshop and back to the same . including tools & tackles and labour charges etc all complete at p/plant., cost for repairing of 20 h.p. c/f pump with m/s/f s.s. shaft as per sample 1 no. c.i. gland tightner 2 nos, c.i. bearing housing 2 nos, ms. check nut 2 nos, c.i. neckring 2 nos, ball bearing s.k.f. as per sample 2 nos, all labour tools & tackles and materials with loading and unloading transporting charge from site to workshop & vice versa., cost towards varnishing, heating of winding & greasing of both side ball bearing of 25 h.p. induction motor 3 phase, 1440 rpm, volt 410 10% 50 cycle along with supplying & fitting of tyre coupling 2 nos, then testing on full load at site including supply of all labour tools and tackles., cost for repairing of 25 h.p. c/f pump with m/s/f s.s. shaft as per sample 1 no. c.i. gland tightner 2 nos, c.i. bearing housing 2 nos, ms. check nut 2 nos, c.i. neckring 2 nos, ball bearing s.k.f. as per sample 2 nos, all labour tools & tackles and materials with loading and unloading transporting charge from site to workshop & vice versa., supplying all labour tools and tackles for complete opening, dismantling , cleaning of its slots o

Central Government/Public Sector

CTN :45303710

08 Jun, 2026 NA

Aurangabad(Bh) - Bihar

Tender For load testing of all t&p equipments (lifting tools, tackles, elevators,

Central Government/Public Sector

CTN :45177877

27 May, 2026 NA

Hazaribag - Jharkhand

Tender For corrigendum : biennial load testing contract of all tp equipments (lifting tools tackle,lifts) of rls chp

Central Government And Public Sector

CTN :45090913

04 Jun, 2026 NA

Guwahati - Assam

Tender For design, manufacturing, supply, installation, testing and commissioning of electric overhead traveling crane, capacity: 35/10t and dsl along with spares as per schedule-iv and additional spares and items viz slings/lifting tackles as specified in schedule-i, maintenance tools as per schedule-v, any other accessory treated as concomitant accessory and preventive maintenance during 1st and 2nd year of warranty period. [ warranty period: 24 months after the date of delivery ]

Central Government And Public Sector

CTN :45077845

03 Jun, 2026 NA

Guwahati - Assam

Tender For design, manufacturing, supply, installation, testing and commissioning of electric overhead traveling crane, capacity: 25/10t and dsl including spares as per schedule-iv and additional spares and items viz slings/lifting tackles as specified in schedule-i, maintenance tools as per schedule-v and any other accessory treated as concomitant accessory (as per attached leading parameters and detailed technical specifications specified in schedule-i and section-v conforming to specification no. cofmow/ir/eotc-2022, rev-0 or latest). [ warranty period: 24 months after the date of delivery ]

State Government

CTN :45272866

19 Jun, 2026 29.60 Crore

Shikaripura - Karnataka

Tender For survey, investigation, design, supply, erection, testing and commissioning of tank filling scheme for filling 15 number of tanks, comprising of construction of barrage, in take structure, pumping machineries, 11/0.433 kv electrical sub station, transmission line rising main by lifting water from dandavathi river in soraba taluk shivamogga district including supply of spares parts & tools, operation & maintenance for five years after successful commissioning of the work for yadagoppa tank filling scheme works on turnkey basis

Central Government/Public Sector

CTN :45137990

27 May, 2026 NA

Raigad - Maharashtra

Tender For corrigendum : repair, maintenance, and installation of plant/ systems/equipments (version 2) - industry unit; tender for the job of obtaining consent to establish for hter scheme at rcf thal unit through nipl route; as per scope of work; a) safety violation by contractor employee at work place: 1) working without wearing safety helmet (per person), 2) working without wearing safety shoes (per person), 3) working without wearing safety goggle &/or hand gloves during handling of hazardous chemicals, acid/alkali etc. (per person), 4) working without wearing safety belt (double lanyard full body harness) for height jobs above 2 meters. (per person), 5) working without wearing face shield during cutting, welding, grinding activity and during maintenance work on process lines and equipment. (per person), 6) not using ppe, tools/tackles as mentioned in safety work permit (per person), 7) working without valid test certificate for lifting tools/tackles (per incidence observation), 8) working without appropriate electric plug-pin, elcb/rccb/rcbo (per incidence observation), 9) working without a valid safety work permit (per incidence/ observation), 10) permit not available at site (per incidence/observation), 11) gas cylinder without flash back arrestor (per incidence observation), 12) gas cutting set with damaged hose pressure gauge without valve key (per incidence/observation), 13) gas cylinder without trolley (filled and empty) (per incidence/ observation), 14) unauthorized personal entering into cordon off area (per incidence/observation), 15) faulty wire/cable laying on ground or using snapped cables (per incidence/observation)., 16) improper hand tool or power tools (per incidence observation), 17) smoking at work place area. (per person), 18) found in intoxicated state (per person), 19) violation of road rules (per incidence observation), 20) b) safety violations by transport contractors, 21) faulty hazchem displayed on tanker (per incidence observation), 22) one pvc/tychem suit set if available (per incidence/ observation), 23) both pvc/tychem suit set are not available (per incidence observation), 24) fire extinguisher without hydro test. (per incidence/ observation), 25) trem card not available (per incidence/observation), 26) hazardous chemicals transportation training of driver by authorized agencies. (training card not available with driver) (per person), 27) lying/resting below the vehicle(per incidence/observation), 28) any other deviation found as per checklist for tankers (per incidence/ observation.

Central Government And Public Sector

CTN :44687431

25 May, 2026 NA

Raebareli - Uttar Pradesh

Tender For bid to ras corrigendum : tender for supply of calibration of aviation standard tools and equipments : : - battery charger alpha c20/25 , battery charger alpha c20/25 , battery discharger bc 5000 , battery discharger bc 5000 , multimeter fluke 179 , torque wrench 5-35 nm , dc power supply l-3230 , ramp tester ifr-6000 , torque screw driver a402 (0.5- 2.5 nm) , carbon monooxide meter s/n- 211222325 , combination set , combination set 0-360 degree , compass landing (sirs/189/188) , d t i digital gauge 0-10 mm , d t i gauge 0-10 mm , depth gauge 0-150 mm , digital multimeter metravi 19 , digital protactor 0-90 degree , feeler gauge , feeler gauge 0.03-1 mm , force gauge 0-200 lbf , force gauge digital , hi voltage cable tester , hole gauge , micrometer digital 0-25 mm , micrometer external 0-150 mm , micrometer inside 0-1mm , micrometer inside 0-25 mm , pressure gauge 200 psi , pressure gauge , pressure gauge , pressure gauge 0-1000 psi , pressure gauge 0-150 psi , pressure gauge 0-150 psi , pressure gauge 0-250 psi , pressure gauge 0-500 psi , pressure gauge 0-6000 psi , pressure gauge 0-6000 psi , pressure gaugte 0 - 1000 psi- n2 kit , spirit level ts/94/2 (300 mm) , spring balance 0-50 kg , stop watch analog , straight edge , surface plate 18 inchx18 inch , telescopic gauge 12 to 54 mm , torqe screw driver 2-8 nm , torqe screw driver new capri , torque wrench , torque wrench , torque wrench 20-100 lb-ft , torque wrench 2-14 nm , torque wrench 5.6 23.7 nm , torque wrench 5-35 nm , torque wrench 5-35 nm , type pressure gauge digitel 150 psi , tyre pressure gauge 0-12 kg , tyre pressure gauge 0-200psi , pressure gauge 0-250 psi , pressure gauge 17.5 kg (spark plug tester) , volt meter , digital thermohygrometer , digital weighing balance , digital thermohygrometer , air compressor capacity 50 liter , air compressor capacity 50 liter , air compressor capacity 30 liter , air compressor capacity 30 liter , lifting beam (engine sling) , mobile crane with 10 mm wire rope , chain pully with mono rail , chain pully with mono rail , chain pully with mono rail , chain sling 4 leg 8 mm link dia , mobile crane with 12 mm link chain

Central Government And Public Sector

CTN :45260579

30 May, 2026 NA

Kalpakkam - Tamil Nadu

Tender For supply of item no - 1 - part no - ss-10m0-6 stainless steel swagelok tube fitting union, 10mm tube od , item no - 2 - part no - ss-6m0-6 stainless steel swagelok tube fitting union 6mm tube od , item no - 3 - part no - ss-6m0-c 316 stainless steel cap for 6mm od tubing , item no - 4 - part no - ss- 10m0-c 316 stainless steel cap for 10mm od tubing , item no - 5 - part no - ss-6m0-p 316 stainless steel plug for 6mm swagelok tubing fitting. , item no - 6 - part no - ss-10m0-p 316 stainless steel plug for 10mm swagelok tube fitting , item no - 7 - part no - ss-6m0-6bt ss union bored through 6mm od , item no - 8 - part no - ss-10m0-6bt stainless steel swagelok tube fitting union 10mm tube od bored through. , item no - 9 - part no - mh-htb-6m hand tube bender , 6mm tube od 15mm bend radius , item no - 10 - part no - ms-htb-10m hand tube bender, 10mm tube od 24mm bend radius , item no - 11 -part no -ms-tc-308 tube cutter for stainless steel, soft copper, and aluminium tubing from 3 by 16 inch to 1 inch od and 6 to 25mm outside diameter, from 3 by 16 inch to 1 inch od , item no - 12 - part no - ms-tcw-308 tube cutter replacement cutting wheel , item no - 13 - part no - ms-tf-16-cs-06mm tf 16 series tube facing tool collet set - 6mm od , item no - 14 - part no - ms-tf 16-cs-10mm tf 16 series tube facing tool collet set - 10mm od , item no - 15 - part no - ms-tf-16-21-e tf16 series tube facing tool for sizes 1 by 8 inch to 1 inch - 3mm to 25mm - size with india power cord 230v 50 by 60hz and users manual , item no - 16 - part no - ms-tdt-24 tube deburring tool, 3 by 16 inch to 1.1 by 2 inch and 4 to 38mm od ) /bid number : gem/2026/b/7506821 * /dated: 20-05-2026 & & / bid document 1 / 19

Deburring Tool Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors