Latest decibel meter Tenders | Government decibel meter Tenders

State Government

CTN :40706454

30 Jun, 2025 25.88 Lacs

Multi City - Karnataka

Tender For supply of transformer winding resistance meter, turns ratio meter with interface, digital high voltage insulation resistance tester and oil bdv test kit.

CTN :40633387

17 Jun, 2025 3.00 Lacs

Kanpur - Uttar Pradesh

Tender For corrigendum : daiviya apda work under edsd- rura - carriage of various size pcc poles from store center or from any other place to the respective site of work distence up to 75 km through the kachha pacca road including the work of its loading & unloading at the respective ends also including the work of its dragging etc. and also including the cost of labour, t & p and carrier etc. required for proper completion of work., carriage of various size st poles (9 mtr /11mtr/ 13mtr ) from store center or from any other place to the respective site of work distence up to 75 km through the kachha pacca road including the work of its loading & unloading at the respective ends also including the work of its dragging etc. and also including the cost of labour, t & p and carrier etc. required for proper completion of work., carriage of line material viz. weasel/rabbit/racoon /dog conductor, g.i. earth wire, cross arm, angle, channel, cable boxes, static meter insulators, clamps and other line material from store center or from any other place to the respective site of work through the kachha pacca road including the work of its loading & unloading at the respective ends also including the work of its dragging etc. and also including the cost of labour, t & p and carrier etc. required for proper completion of work., erection of p.c.c double pole including the work of complete h.t. fittings as per respo manual and as per direction of engineer incharge including the cost of labour, t & p and carrier etc. required for proper completion of work., grouting of p.c.c double pole the support shall be grouted with cement, sand and brick ballast/stone ballast in ratio 1:4:8 including the cost of arrangement of cement, sand, brick ballast/stone ballast, stone pad etc. as per actual site requirement., erection of p.c.c single pole including the work of complete h.t. fittings as per respo manual and as per direction of engineer incharge including the cost of labour, t & p and carrier etc. required for proper completion of work., grouting of p.c.c single pole. the support shall be grouted with cement, sand and brick ballast/stone ballast in ratio 1:4:8 including the cost of arrangement of cement, sand, brick ballast/stone ballast, stone pad etc. as per actual site requirement., erection of s.t.p single pole including the work of complete h.t. fittings as per respo manual and as per direction of engineer incharge including the cost of labour, t & p and carrier etc. required for proper completion of work., grouting of s.t.p single pole. the support shall be grouted with cement, sand and brick ballast/stone ballast in ratio 1:4:8 including the cost of arrangement of cement, sand, brick ballast/stone ballast, stone pad etc. as per actual site requirement., erection of s.t.p double pole including the work of complete h.t. fittings as per respo manual and as per direction of engineer incharge including the cost of labour, t & p and carrier etc. required for proper completion of work., grouting of s.t.p double pole. the support shall be grouted with cement, sand and brick ballast/stone ballast in ratio 1:4:8 including the cost of arrangement of cement, sand, brick ballast/stone ballast, stone pad etc. as per actual site requirement., renozzling of damaged stay set as per respo manual and also including the cost of all grouting material, labour, t & p etc. required for proper completion of work., dismentling of rusted weasal/racoon /dog conductor wire and g.i wire & safe carriage of scrap material back to store as per respo manual and as per direction of supervising engineer. it includes the cost of labour, t & p, carries etc. required for proper completion of work., laying, sagging, stringing, binding and jumpering etc. of weasal/dog/rabbit conductor in new erected pole as per respo manual and as per direction of supervising engineer. it includes the cost of labour, t & p, carries etc. required for prope

CTN :40336503

23 Jun, 2025 NA

Sriharikota - Andhra Pradesh

Tender For corrigendum : supply of sound level meter / noise level meter (sound measuring apparatus or decibel meter) (q3)

CTN :40329205

16 Jun, 2025 NA

Kharagpur - West Bengal

Tender For supply of ht panel consisting of 12kv 18.4ka, 630a indoor type incoming microprocessor based vcb - 2 nos ct ratio 200/100/50/5, 12kv,18.4ka, 630a indoor type outgoing microprocessor based vcb - 4 nos & 12kv,18.4ka, 630a indoor type outgoing microprocessor based vcb - 01 as bus-coupler ct ratio - 200/100 /50/5 with all other accessories with complete set with ammeter, voltmeter, led indicator, energy meter, c t, pt, protective relay with suitable metallic enclosures and complete wiring to complete the job with 1000 a capacity cu bus-bar and with interlocking facilities. (the panel consists of 7 nos vcb) make - any indian make of is standard [ warranty period: 30 months after the date of delivery ]

CTN :40644873

24 Jun, 2025 NA

Jharsuguda - Odisha

Tender For supply of welding table for gas and welding table for arc , compressors testers for small hermetic compressors , split phase induction motor trainer , bldc motor with controller trainer , idu pulse generation type motor , capacitor start induction motor trainer , ac 3 phase motor 400 50 hz trainer , star delta starter 2hp , auto transformer starter 3hp , dol starter 2hp , portable air lpg brazing kit , oxyacetylene welding set complete , single door direct cool refrigerator trainer , frost free refrigerator trainer , three or four door refrigerator inverter type trainer , core drill machine , bench drilling machine , grinding machine , evacuating and refrigerant charging station , evacuating and charging station fitted with weighing scale , two stage rotary vacuum pump 3 or 4 cfm , dry n2 cylinder , window ac triner , split ac trainer , duct able split ac 1.5 ton trainer , recovery unit with cylinders , decibel meter , cassette air conditioner trainer , de scaling pump set , fan coil unit , shell and tube dx chillers small , circulating water pump small , refrigerant cylinder 10 kg capacity , gauge manifold with gauges , shell and tube type condenser 5 ton , rotary hermetic compressor 2 ton , bottle cooler visible trainer , deep freezer trainer , display cabinet 2 ton capacity trainer , water cooler storage type trainer , water dispenser trainer , ice candy plant trainer , air conditioning direct system trainer , air conditioning indirect system water cooled trainer , package ac trainer , car ac components full kit , car ac tutorial model trainer , bus ac tutorial model trainer , automatic ice cube machine trainer , storage type water cooler hot and cold trainer , visi cooler 185 l trainer , vrf or vrv unit with two indoor units , split ac inverter technology trainer , walk in cooler puf insulated for cold room 6x4.5x8 cft , absorption system small size //bid details 2 / 45

State Government

CTN :40647490

27 Jun, 2025 NA

Bhopal - Madhya Pradesh

Tender For supply of sound level meter / noise level meter (sound measuring apparatus or decibel meter) (q3)

CTN :40639840

28 Jun, 2025 NA

Multi City - Multi State

Tender For supply of 400 meter cinder track with sprinkler system , excavation up to 10 cm to 15 cm comma watering , application of weed chemical over the track , laying of 4inch broken bricks or 40 to 60mm hard stone and compaction , lay a layer of 8 cm red earth without any grass or weeds , filling of cinder clay mix with 1 ratio 3 which is 1 percent soil into 3 percent , both side raise border both inner and outer of 10 cm height into 5 cm width , providing and construction open storm water drain on 450 mtr , chuna line marking 50mm line 120cm wide total 8 lane , water motor monoblock submersible pump 2hp oblique hp , hydro cyclone filter 2 point 5 inch , disc filter , 75mm pvc 4 kg , service saddale 75 oblique 32 , 32mm pvc , brass nozzle , pvc tee 75mm , pvc end cap 75mm , 75mm elbow

Central Government/Public Sector

CTN :40613341

16 Jun, 2025 4.33 Lacs

Raigarh - Chhattisgarh

Tender For testing and calibration of different electrical equipment related to ht installation (vcb, transformers, starters, motors, protective relay etc.) at chhal ocm , secl, raigarh area . - item description, testing & calibration of protective relay ( idmt/overhead relay, elr, cdg, earth fault relay, no volt relay/master trip relay, under/over voltage relay), testing of 6 nos. 6.6 kv/230v, 25 kva, transformer, 1 no. 1250kva, 33kv/3.3kv transformer and 1 no. 315kva, 3.3kv/440v transformer, this includes magnetizing test, magnetic current test, vector group test, ir/pi test, ratio test, acidity test, as per latest cear field testnote: work also includes prepartion of test report etc., testing of 6.6 kv ht motor, this is include ir/pi test, inductance test asper latest cear flied test, test and calibration of 6.6 kv vacuum circuit breaker panel having 5 nos. panels received from j&k area at chhal ocm sub station and 2 no. field vacuum circuit breaker chhal ocm sub station, 1 no. sf6 circuit breaker dharam sub station, which includes ir test, contact resistance test, close open test, as per latest cear field test, ir/high voltage test of cables, testing & calibration of all other protective/measuring equipments (meggers, lux meter, high voltage detector, multimeter etc.) in mine & surfacenote: work also includes prepartion of sigle line daigram, mine plan, test report etc., test of 6.6 kv overhead lines, which includes ir test of conductor, and post , disc insulator ir test as per latest electricity rule, test of 6.6 kv ht starter panel, which includes ir test, contact resistance test, close open test, as per latest cear field test, total impact of gst for the purpose of ctc