Latest deck slab Tenders | Government deck slab Tenders

State Government

CTN :44833271

20 Apr, 2026 50.00 Lacs

Jalore - Rajasthan

Tender For close graded gsb material as pert table /400 a , aggregates 45 mm to 2.8 mm , aggregates 6 mm nominal size , stone crusher dust finer then 3 mm with not more than 10% passing , 0.075 sieve , cost of water , padla/kekar/jhaara , mortar/mud mixture , kiln lime for lime masonry work , cement , ppc , white cement , fine aggregate , sand/gravel , gravel-local , rakhi (fly ash) , surkhi , stone dust (in masonry) , ballast stone/brick (for other than road work) , 40 mm measuring stone (hand-broken grit) (voids cut 1/11) , 40 mm grit stone (crushed) (voids cut 1/11) , 20 mm grit stone (crushed) , 12/10/6mm grit stone (crushed) , brick mortar , material for road work (including 5 km lead) , 63-40 mm crusher crushed stone road (voitus cut 1/11) , 63-40mm hand-broken stone rod (voids cut 1/11) , 90-45mm hand-broken stone rod (voids cut 1/11) , quarry rubbish (voids cut 1/6) , gravel (voids cut 1/6) , kankar (voids cut 1/6) , binding material (pi 4-6) (voids cut 1/6) , up to 5 km , 5 km to 10 km additional fare per km. , 10 km to 20 km additional per km. , for distances above 20 km, additional charges per km will be levied. , laying of gravel, karkar, quarry rubble and coarse aggregate in thickness less than 15 cm (without crushing) in the prescribed camber and grade of the road, spreading and pressing with roller of 8-10 ton weight, tamping and all charges including water charges and hire charges of tools and machinery. , g25nun 7.50 cm) , first class , second class (under class) , soling/ kharja masonry tiles , chinnai derha (rr) , masonry remains (cr) , kharja soling (for floor work up to 15cm height) , kharja soling (23 cm height for road/kharja work) , jodhpur type stone slabs/bows/slabs (length 2-3', height 10-12', thickness 25-35") , flaky material (3-4" thick & length and width 1-2") , sandstone (dpc, sill, coping, lintel, tand, almirha etc.) , up to 25 mm thickness , up to 25-40 mm thickness , up to 40-50 mm thickness , up to 50-75 mm thickness , up to 75-100 mm thickness , up to 100-150 mm thickness , paving stone , floor slabs upto 35 mm thick, min. 3 sqft or more area , katla for patti patan 60-75 mm, min. 3 sqft or more area , unpolished rough kota stone , up to 900 sq. cm. , 901 to 2300 sq. cm. , more than 2300 sq. cm. , polished kota stone (one side polished) , up to 900 sq. cm. , 901 to 2300 sq. cm. , more than 2300 sq. cm. , marble stone (makrana adanga 20 mm thick) , up to 900 sq. cm. , 901 to 2300 sq. cm. , more than 2300 sq. cm. , marble chips , marble powder , marble stone (rajnagar ii quality / local_20mm thick) , up to 900 sq. cm. , 901 to 2300 sq. cm. , more than 2300 sq. cm. , stone frame , single pattern size 100 x 75 mm. , double paitam size 125 x 75 mm. , stone slabs , up to 1.5 m length, minimum 40 mm thick , 1.5 m to 2.40 m length, minimum 50 mm thick , 2.4 m to 3.0 m length, minimum 65 mm thick , above 3.0 m length, minimum 75 mm thick , precast tiles / blocks , glazed size-30x45 cm , mosaic size-40 mm thick , vitrified size-60x60 cm , cheekered tiles size-30x30 cm , interlock tiles/brick/block for road work , cement interlocking block m-30 grade, 60 mm thick , cement interlocking block m-30 grade, 80 mm thick , cement interlocking block m-30 grade, 100 mm thick , local wood with fittings (for doors, windows and furniture) , acacia , other (teak) , factory made doors (30 mm thick, solid core single pane) , structural steel , iron (or steel fe 415/500 for reinforcement) , winding wire 18 gauge , iron guard , conical iron / square rebar / leaf / angle iron , barbed iron wire (size 12 gauge wire and 12 gauge strad/12 gauge wire and 14 gauge strad/14 gauge wire and 14 gauge strad) , forged , iron mesh (24 gauge, 14 mesh) , cement concrete lattice sky patal 40mm thick , glass , 3mm thick glass , 5mm thick glass , color paint , inamil paint , distemper (water bound) , lime - for whitewashing (aras / bud) , primer (for iron/wood) , exterior paint , plastic paint , cement paint , petroleum products , diesel hsd

CTN :44863687

02 May, 2026 NA

Bhubaneswar - Odisha

Tender For casting of concrete slabs to replace the old and broken slabs covering the cable trench and earthpit of 220kv, 132kv and 33kv switch-yard of grid s/s chandaka

Corporations/Associations/Others

CTN :44831993

17 Apr, 2026 4.23 Lacs

Shikaripura - Karnataka

Tender For installation of covering slab on south side of drain in main road of ulli badavane near ambedkar nagara and installation of deck slab in masur road near pentrol bunk

Corporations/Associations/Others

CTN :44817480

23 Apr, 2026 13.75 Lacs

Multi City - Karnataka

Tender For construction of wet mix concrete road from mylarappa house to jayaram house in guddadahalli village, arehalli, under bashettihalli town panchayat limits, repair of drains, installation of covering slabs on drains, repair of pipelines, installation of new pipelines and gate walls to provide water connection.

Corporations/Associations/Others

CTN :44817526

23 Apr, 2026 11.25 Lacs

Multi City - Karnataka

Tender For construction of cc drain and deck slab up to sonnaraju land, nagaraju shop, guddadahalli village, arehalli, under bashettihalli town panchayathi limits, and work of pouring wet mix and pouring concrete next to the drain.

CTN :44598696

10 Apr, 2026 NA

Sonitpur - Assam

Tender For bid to ras supply of as per ts , gate size 3 mx 2m double leaf frame made of angle iron 75x 75x6mm isi grade with shutters made of reinforcement tmt bar 12 mm dia as per ts , anti corrosive red oxide zinc chromate primer confirming to is 5 2004 make berger or asian or nerolac or equivalent , white lime , cement based paint snowcem of make berger or asian or nerolac or equivalent , three phase 1point 2 hp monoblock pump 430 volt complete and incl 3 mtr length required size flexible suction pipe foot valve as per ts , air termination single pointed aluminium rod 12 mm dia and 300 mm long , testing point terminal block make of gun metal and phosphorus bronze size 75 x 75 x 25 mm drilled and screwed including 3 nos 8 mm dia 25 mm long hexagonal head screw , aluminium strips 25 x 3mm , galvanized iron strip 32 x 6 mm , earthing plate 600 x 600 x 6 mm galvanised steel suitable for gi strip fittings drilled with 2 nos holes for 6 mm dia near one side , charcoal , salt normal , ci earth pit cover of size 300 x 300 x 6 mm with angle iron of size 20x20mm 3 mm thick with ms frame , nut bolt 6mm dia 30 mtr dia with check nut and washer , gi pipe 40mm dia 2 point 5 mtr , insulating pvc block 75x75x30 mm with insulating clamp nut and bolt , non woven geotextile 500gsm as seperation layer between wall and pvc mebbrance with provision of pvc disk and anchor faster for wall as per ts , 2 mm thick pvc p water proofing membrane properties of 2 mm thick pvc p water proofing membrane thickness minus 2 mm 5parcentage as per ts , non woven geotextile 500gsm as protective layer of pvc water proofing membrance with provision of high quality adhesive as per ts , non woven geotextile 500gsm as seperation layer between foundation and pvc mebbrance properties of geotextile 500 gms as per ts , non woven geotextile 500gsm as protective layer of pvc membrance properties of geotextile 500gsm properties of for wall as per ts , non woven geotextile 500gsm as seperation layer between deck slab and pvc mebbrance properties of geotextile 500 gms as per ts , 2 mm thick pvc p water proofing membrane properties of 2 mm thick pvc p water proofing membrane as per ts , non woven geotextile 500gsm as protective layer of pvc waterproofing mebbrance with provision of high quality adhesive as per ts , high quality adhesive for termination of pvc water proofing membrane at doors ventilators , pvc pipe 75 mm dia 3 mtr long make prince finolex supreme

CTN :44780997

21 Apr, 2026 4.15 Crore

Gundlupet - Karnataka

Tender For construction of cc road cc drain and deck slab in main market yard and terakanambi sub market yard of apmc gundlupet in chamarajanagar distric2025-26

CTN :44413402

10 Apr, 2026 20.00 Lacs

Satna - Madhya Pradesh

Tender For lok nirman material - opc cement, ppc cement, khajuraho sand, son sand, local clay bricks, chimney bricks (20x10x10 cm - buddha), chimney bricks (allahabadi), stone blocks (20x20x20 cm - buddha), hand-broken crushed stone (40 mm), hand-broken crushed stone (95-45 mm), hand-broken crushed stone (65-45 mm), machine-crushed stone (40 mm), machine-crushed stone (20 mm), machine-crushed stone (12 mm), stone slabs (25 mm), stone slabs (30 mm), stone slabs (40 mm), stone lintels (100 mm), shuttering - roof (steel/plywood), shuttering - columns/beams (steel/plywood), shuttering - roof (wood), shuttering - columns/beams (wood), concrete mixer machine rental (8 hours, incl. fuel), vibrator machine rental (8 hours, incl. fuel), pvc ceiling work (completed job), dumper rental (8 hours, incl. fuel & driver), tractor rental (12 hours, incl. fuel & driver), static roller rental (8 hours, incl. fuel & driver), vibratory roller rental (incl. fuel & driver), ms reinforcement bars (10, 12, 16, 20 mm), ms reinforcement bars (8, 6 mm). binding wire, fencing wire, m.s. grills and mesh, complete iron doors and windows, white cement, distemper, primer, varnish, paint, wire pins and oil, concrete poles (0.1m x 0.1m x 1.5m), concrete poles (0.1m x 0.1m x 1.8m), 125mm/150mm bore cleaning, 125mm/150mm diameter drilling work, casing pipes (125mm diameter upvc), casing pipes (150mm diameter upvc), casing pipes (125mm diameter g.f.), casing pipes (150mm diameter g.f.), casing pipes (125mm diameter m.s.), casing pipes (150mm diameter m.s.). for the year 2026-27: minor original and repair works (road construction) up to rs. 1.00 lakh, as per issr dated august 02, 2021; and minor original and repair works (building construction) up to rs. 1.00 lakh, as per issr. as of august 2, 2021: hume pipe np3 (300 mm dia.), hume pipe np3 (450 mm dia.), hume pipe np3 (600 mm dia.), hume pipe np3 (900 mm dia.), hume pipe np3 (1000 mm dia.), hume pipe np3 (1200 mm dia.); installation of slider windows; installation of plywood-sunmica doors; whitewashing work (including labor for emulsion application); putty work (including material and labor); and in-situ installation of rcc dasa (100 mm thick).