Latest decoupling network Tenders | Government decoupling network Tenders

State Government

CTN :45275642

02 Jun, 2026 3.07 Lacs

Serampore - West Bengal

Tender For repairing and overhauling of one no twin lobe air blower assembly and renovation of 2 nos outgoing motor (blower ) feeder of lt pdb with supply, fitting and fixing spares at sludge pump house under swtp, kmda. - supply,installation,testing and commisioning of following items for hoisting system/ blower and gear box as mentioned below as per direction including cost of materials, machinaries , manpower, cutting,machining,aligning,anchoring,welding,finishing,consumables, carriage and all overheads with all leads and lifts complete as per specification (without painting), i) base frame (ms), ii) shaft/pin with key ways made of ss-304, iii) gear& pinion (forged steel), supply and fixing the 3way c.i v grooved pulley with complete mechanism key way suitable to en-24, 60 mm dia/ as per sample of shaft end., a) motor driving, b) blower driving, supply of gear oil as per direction of engineer in charge., supply of grease, supply and delivery of the following bearing (make: skf):, i) 22312e/c3/ as per sample. (for blower), supply and fixing of tough v belts (make: fenner/power boom / v guard/benq/ecodrive) of the following size c 98/ as per sample., supply fitting fixing of ss (aisi304) bolts,nut & washer i) dia 10 mm to 20 mm a) length upto 75 mm, refixing of impeller of blower after dynamic balancing in workshop as per is rule after dismantling the same., dismantling the 25/30 h.p (18.5 kw)//30 h.p squirrel cage motor from its foundation by opening mounting bolts and disconnection of cables from terminal box and open the v belts for repairing purpose (in condition), preliminary checking of the whole motor (lt sq. cage im) and testing of i.r. value, load currents, leakage factor of stator & rotor, terminal lead joints of stator connection ends, insulation of glass fibre terminal bar, double cage rotor end rings and all of motor bars and bar joints, housing of d.e. & nde shield bearing housing etc. before work to detect fault., complete servicing and heat varnishing of 415volt, 3 phase l.t. sq. cage induction motor after cleaning the stator and heating it up periodically and varnishing by dr. beck s graded insulating varnish to obtain stable ir value, cleaning up the rotor, including heating for demoisturisation, lacker coating on the surface of rotor stampings, cleaning and ro priming on the end shield covers, bearing housing and complete the necessary repairing works as per direction of e.i.c.upto 75kw lt sq. cage im ], re fixing the 25/30h.p star/delta squirrel cage motor over its foundation by mean of mounting bolts & nuts, washer complete connection of existing led of cable at the terminal box and wear the v belts with proper alignment in respect to i.d. fan (12000 cu m/hr capacity)/ blower by adjusting the side rail for smooth running., finishing the end of terminal leads by s & f dowells copper sockets properly supplying tapes, petrollium jelly etc. 6 nos.upto 75kw lt sq. cage im., cost of mechanical work viz. shaft truness, checking key way looping of holes grinding and polishing etc. upto 75kw lt sq. cage im., inspection checking/testing and servicing of the existing starter panel, all terminal connection, contactors, relays etc as per desired technical specification including man and minor materials for proper functioning as per direction of eic., supply and fixing of 240/230 volt, 50 hz, t.p., power contactor (make: l & /abb/schneider/ simence/ ge) having contact block of the following range.32-55amp, supply & fixing of 230/240v, led indicating lamp make :ae/kappa/imp) blue/ white color., supply & fixing of 230/240v, led indicating lamp make :ae/kappa/imp) other than blue/ white color., supply and delivery of thermal overload relays (make: l & t/abb/schneider/simence/ ge/minilec) of the following range:a) 0.2-0.33/ 0.3-0,5/ 0.45-0.75, mn2, supply of ammeter selector switch current in each phase with off, 4 pos. 90 angle ofthrow (off-r-y-b) , supply and fixing of analog ammeter ranging

Central Government/Public Sector

CTN :45302387

28 May, 2026 NA

Multi City - Gujarat

Tender For auction sale of others - abandoned old buildings/sheds/structures of mg workshop- 04 units, unit no. 19 - small shed near dome, unit no. 22 - record room, unit no. 23 - dwm office, unit no. 24 - machine and generator room location - mg workshop bvp. this lot of abandoned condemned buildings consisting of released door with chokhat wooden u/s - 3 nos, released window with chokhat wooden u/s - 41 nos, released wood - 1.296 cum, released ac sheet approx. - 433 sqm, released steel door u/s - 60 kg, released manglore tiles approx. - 620 sqm, released rails from structures u/s [41.25.50r & other miscellaneous type of rail off sizes] - 896 kg, ms scrap. i.e tie bar, flat, angle, fish plate, nut, bolt, ms sheet door, steel bar, gi sheet, xpm jalli etc. off size approx - 6726.7 kg, released masonary /rubble approx - 290.9 cum. custodian - sse (w) bvp, mode of delivery by lot, loading by purchaser. note: 1. dismantling is permitted up to ground level only. digging below ground level is not permitted. due care is to be taken by the bidder/purchaser to avoid unwanted mishapes at work spots. they should ensure to keep a safety banner around the work spot till it is completed since the locations are surrounded with working offices. 2. after removing/ clearing the rcc/ brick machonary rubbish from the spot only, the delivery of wood/ iron material will be affected. 3. contractor should take care of any cable while dismantling and digging. damage to railways shall be recovered as per extent rules. 4. part delivery/ part handing over is not allowed. 5. any ng/mg/bg pway rail lines or pway scrap with or without attachments lying under or beneath the building/sheds/structures or surrounding area are not deliverable. 6. any non-ferrous material of high value if found from the lot, it needs to be submitted by the purchaser to the custodian. 7. power of attorney along with aadhar card/identity proof/address proof must be submitted to this office for verification of authorised person by bidder before handing over (if any.) fdp 50 days.

State Government

CTN :45287473

28 May, 2026 NA

Chandrapur - Maharashtra

Tender For procurement of spares of bottom ash hopper feed gate, hydro ejectors and liners for clinker grinder during u#8 aoh at ash handling plant cstps, chandrapur. - 85tph liner pn be1440d-01, 85tph liner pn be1440d-02, feeder ejector ayems inlet liners, slight glass assly size-3/4" n3922, hopper driplex inspection glass 220 mm, macawber beekay gland follower, bearing cover (1 set = 4 nos.) be1435d, bearing block (1 set = 4 nos.)be1434d, spur gear be1437d, shaft stuffing block be1431d, gate liner for door frame thick 24 mm, gate liner thickness 14 mm, fed gate side guide plate pn be5064d, fed gate flood light assly be3749d-02, complete feed sump assembly with liner, throat & discharge piece(be 3261d-03), fed gate bracket,pin &piston rod clevis, feed gate cylinder assy pn be4865d, feed gate tecpro sys power cyl seal set, ahp basys fdgate guide rail, fed gate lower wedge be1121d-b, fed gate upper wedge be1121d-a

corporations/Associations/Others

CTN :45294905

03 Jun, 2026 2.97 Lacs

Kolkata - West Bengal

Tender For supply and installation of various electrical equipments in place of burn out and damaged ones at different panels and allied works at shanagar burning ghat. - supply and delivery of mccbs with thermal magnetic release breaking capacity thermal release rang 125-160a, breaking capacity icu at 415v ac, 50hz, 50ka4pole , supply and delivery of thermal overload relays (make: l & t/abb/schneider/simence/ ge/minilec) of the following range: 24-40, mn2, , power contactors: supply and fixing the power contactor t.p 70a, l & t make (ml-4) having 240v, 50hz, coil incl. 2 no + 2 nc aux contact block., , power contactors: supply and fixing the power contactor t.p 16a, l & t make having 240v, 50hz, coil incl. 1no+1nc aux contact block., , supply & fixing of 415/440 volt, hrc fuse (make: l&t/havels/cgl/ge).for 250 amp supply and fixing of analog ammeter ranging 0-100amps having c.r ratio of 100/5a, 144 mm sq size (make: ae/kappa/mp)., , supply and fixing of analog voltmeter ranging from 0-500 v of 144 mm sq size (make: αε/καрралмр)., , supplying and fixing 415v, tpn sfu open execution in existing ss enclosure/cubical with nuts bolts etc incl. s & f 3 nos. din type hrc fuse as per rating. 125a siemens, , supplying and fixing 240/415 v mcb of breaking capacity 10ka & c characteristics on din rail of existing dbs and necessary connection legrand 63 a fp, , supplying of 1.1 kv. grade pvc insulated conductor of following cables (make: polycab/gloster/havells/):size in sq. mm, no & dia. of wire in mm, no of core - 4 1/2.24 3, , annexure - i basic rate of materials: (all rates of materials from k-1 to k-14 are excluding vat) 70.1.5 sq.mm 'fr' stranded copper wire, , compression glands.supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture(proof entry of xlpe/pvc armoured cables as below: for, , 3 core.(i)upto 4 sqmm, , finishing cable ends.(b)finishing the end of following xlpe/pvc, , armoured cables by crimping method incl. supplying and fixing solderless socket (dowels make), tapes, anticorrosive paste & jointing materials. (ii) 2 core 6 sqmm cable, , temperature controller: a) supply and fixing the digital type temperature controller of range (0-1200) deg. c of overall dimension 92 sq mm dia x 105mm depth having (cr-a1) heat sensor and 1 no + 1 n.c change over contact to be actuated at crossed of desired temperature in deg.c complete power supply unit of 230v 50 hz., , blue max make

corporations/Associations/Others

CTN :45315533

08 Jun, 2026 16.39 Crore

Jammu - Jammu And Kashmir

Tender For construction for facelifting/civil renovation of power grid corporation of india ltd. office, regional office building situated at ob-26, grid bhawan, rail head complex, jammu, ut of jk

CTN :44750730

05 Jun, 2026 5.75 Crore

Ahmedabad - Gujarat

Tender For corrigendum : design, supply, installation, testing and commissioning and camc for 3 years for active power filter system/dstatcom for power factor improvement in gmrcl traction network of ahmedabad metro rail phase-i & ii

Central Government/Public Sector

CTN :45228052

30 May, 2026 NA

Multi City - Chhattisgarh

Tender For scope of work (sow) as mentioned in tender and schedule of work( 69 )items as given below ,[1] point wiring with pvc copper wire 964.000 m,[2] circuit wiring with pvc copper wire 300.000 m,[3] power plug wiring with pvc copper wire 91.000 m,[4] supply and fixing of gi box 40.000 ea,[5] supply and laying of pvc conduit pipe 268.000 m,[6] supply and fixing 12 way double door db 5.000 ea,[7] supply,fixing led panel light 64.000 ea,[8] supply,fixing modular switch 6a 51.000 ea,[9] supply,fixing modular socket 6a 2 in 1 12.000 ea,[10] stripping,worn out plaster wall&ceiling 985.000 m2,[11] plaster sand/cement mortar,4:1,thk10mm 589.000 m2,[12] removal,rubbish,earth 23.500 m3,[13] prvdg,pcc wrk,m15,1:2:4 5.360 m3,[14] smooth cement plaster,cm1:6,thk15mm 63.000 m2,[15] dismantling of pcc/ rcc structures 8.500 m3,[16] dismantling of brick work 7.000 m3,[17] supply&layg,vitrified tiles 705.993 m2,[18] supply,fitg,fixg,venetian blinds 24.000 m2,[19] prvdg&fixg,false ceiling 230.520 m2,[20] prvdg,oil bound distemper,2 coat 1818.000 m2,[21] supply&applyg,bison exterior putty 704.000 m2,[22] plstrng,priming timber or steel,1coat 183.000 m2,[23] paintg enamel,timber,hi gloss,2coat,?wh 390.000 m2,[24] fixg porcelain auto cistern,white,10l 12.000 ea,[25] fixg flat back urinal,610x400x380mm 26.000 ea,[26] fixg,granite slab,10-12mm,wrking table 50.000 m2,[27] fixg door fitting,stainless steel aldrop 68.000 ea,[28] fixg,door,fully casing tower bolt 69.000 ea,[29] fixing tower bolts of approved type. 16.000 ea,[30] fixg door handle of approved type&size 138.000 ea,[31] fly ash brick wrk, 110mm, m-7.5, (1:4) 46.000 m2,[32] supply & installation of ms rack 13.000 ea,[33] sup,fit,fix hygeine pipe 27.000 ea,[34] supply gi pipe,dia20mm,medium quality 158.000 m,[35] supply gi pipe,dia15mm,medium quality 91.000 m,[36] supply, istallation of smoke detector 6.000 ea,[37] supply,commode 27.000 ea,[38] supply,low cistern 27.000 ea,[39] fixg,stopcock 93.000 ea,[40] fixg,bibcock 51.000 ea,[41] fixg,shower rose 9.000 ea,[42] fixg,wall tiles,kajaria,jhonson 705.000 m2,[43] fixg,towel rail,cp 24.000 ea,[44] supply,liquid soap container 39.000 ea,[45] supply,fixg,antiskid tiles 334.000 m2,[46] fixg,hessian partition,ordinary teak 47.000 m2,[47] procviding & fixing ring hanger 15.000 ea,[48] proving&fixing design mirror 43.000 m2,[49] fixg,cp pillar cock 22.000 ea,[50] fixg,window glass 59.000 m2,[51] provide partition 9mm particle board 10.000 m2,[52] provide partition 4mm clear gla

corporations/Associations/Others

CTN :45280902

02 Jun, 2026 NA

Sonbhadra - Uttar Pradesh

Tender For providing of operation and maintenance power house / power plant - work of realignment & relinking of rail track at inhaul & outhaul of wagon tippler 1 of btps

State Government

CTN :44965195

26 May, 2026 46.20 Lacs

Anuppur - Madhya Pradesh

Tender For corrigendum : track fitting renewal (tfr) work for the existing psc sleeper i.e. supply and fixing of groove rubber pad,metal linner and elastic rail clip under psc sleeper in mppgcl private railway line from xing no. 16 inside power house to sangma loading platef

Central Government/Public Sector

CTN :45036961

27 May, 2026 NA

Ahmedabad - Gujarat

Tender For ahmedabad division - replacement of rusty cantilever, cantilever modification, provision of anti-monkey climbing device & anti-bird disc, provision of large pg clamp and provision of buried rail in power supply installation (psi) & battery replacement

Decoupling Network Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors