Latest deep offset Tenders | Government deep offset Tenders

State Government

CTN :45706667

10 Jul, 2026 7.06 Lacs

Bhavnagar - Gujarat

Tender For installation of various instruments at lakhanka and hamirpara irrigation scheme - providing, supplying, installing, testing, and commissioning of a v-notch weir (mechanical flow measuring device) for measuring low flow seepage in dams. the device shall have a notch angle of 22.5°, 45°, 60°, or 90° depending on discharge range, a stainless steel ss-304 / ss-316 plate with thickness of 3–5 mm, and be suitable for measurement ranges of approximately 0–50 l/s depending on notch angle. the weir shall have ±1% full-scale reading accuracy, operate under 5–100% humidity, temperature −20°c to +60°c, and provide corrosion protection through anticorrosion finish. complete in all respects as directed by the engineer-in-charge. (1) 90° v-notch-20 x 40 secticin 15 lit/sec , providing, installing and commissioning permanent ground control point (gcp) settlemnt marker comprising ms base plate (250×250×5 mm conforming to is 2062), gi riser pipe 25 mm dia (medium class as per is 1239), sand filling (clean river sand, loose), optional pvc/gi outer casing (min 100 mm dia), precast concrete cover (m20, 500×500×50 mm with central hole), ms/gi reference cap, and painting in black & white checkerboard pattern using weather-resistant enamel paint, complete with excavation, installation, alignment, and all materials, labour, tools, and accessories, suitable for survey works using total station / drone survey, complete as per specifications and direction of engineer-in- charge. , providing & laying in position 'nominal mix' cement concrete using cement sand and crushed aggregate by machine mix incl. necessary formworks ,centering ,scaffolding compaction by mechanical vibrator curing as directed with all lead & lift etc. c) concrete grade 1:2:4 and msa-40mm(graded)

CTN :45686658

02 Jul, 2026 3.47 Lacs

Mananthodi - Kerala

Tender For annual maintenance of gas crematorium equipment at mananthavadi municipality wayanad district proposed under 2025-26 annual plan. project no-1068 - civil work, od319315/2025-2026supply, replacement and servicing of automatic burner and fitting gas line., od319328/2025-2026cleaning of chimney surface, machinery repairing, removal of soot and rust, and applying primer with two coats of epoxy paint., od319385/2025-2026repairing damaged brickwork by removing broken bricks and replacing them with new bricks using cement mortar. the work also covers proper alignment,joint finishing, curing, and cleaning of the repaired area, complete as per direction of engineer-in-charge, od319413/2025-2026servicing and maintenance of the motor electrical system, such as inspection of wiring, terminals, switches and connections. it also covers tightening of loose connections, minor repairs, testiong for proper operation, and ensuring safe and smooth functioning of the motor., od319470/2025-2026reparing damaged or worn-out bed with 18 mm ss rod structures by alignment correction, replacement of defective parts if required, welding or fastening works, and ensuring proper strength and stability., od319499/2025-2026repairing of the gas valve system, such as cleaning , replacement of worn-out seals orcomponents if required, leak testing, and ensuring smooth and safe operation. the work shall be carried out as per safety norms., od319520/2025-2026removal of rust, scale, and old loose paint from equipment surface by wire brushing /scrapng, surface cleaning, application of suitable anti-corrosive primer, and finishing with two coats of approved paint. the work includes all materials, labour, tools and incidental charges required to complete., od319580/2025-2026comprehensive maintenance of the installed equipment for a period of one year, covering routine inspections,servicing, minor repairs,adjustments and ensuring continuous and safe operation. including survice of burner, blower, impeller and chimney. the rate includes labour, tools and incidental charges during the maintenanace period, excluding major replacements unless specified.

State Government

CTN :45669079

08 Jul, 2026 7.24 Lacs

Amreli - Gujarat

Tender For installation of various instruments and monitoring system at vadi irrigation scheme - supplying, installing, testing, and commissioning of a v-notch weir mechanical flow measuring device) for measuring low flow seepage in dams. the device shall have a notch angle of 22.5°, 45°, 60°, or 90° depending on discharge range, a stainless steel ss-304 / ss-316 plate with thickness of 3–5 mm, and be suitable for measurement ranges of approximately 0–50 l/s depending on notch angle. the weir shall have ±1% full-scale reading accuracy, operate under 5–100% humidity, temperature −20°c to +60°c, and provide corrosion protection through anti-corrosion finish. complete in all respects as directed by the engineer-in-charge.with different sizes mentioned below: (1) 90° vnotch- 20 x 40 secticin 15 lit/sec, providing, installing and commissioning permanent ground control point (gcp) settlemnt marker comprising ms base plate (250×250×5 mm conforming to is 2062), gi riser pipe 25 mm dia (medium class as per is 1239), sand filling (clean river sand, loose), optional pvc/gi outer casing (min 100 mm dia), precast concrete cover (m20, 500×500×50 mm with central hole), ms/gi reference cap, and painting in black & white checkerboard pattern using weather-resistant enamel paint, complete with excavation, installation, alignment, and all materials, labour, tools, and accessories, suitable for survey works using total station / drone survey, complete as per specifications and direction of engineer-in-charge., providing & laying in position 'nominal mix' cement concrete using cement sand and crushed aggregate by machine mix incl. necessary formworks ,centering ,scaffolding compaction by mechanical vibrator curing as directed with all lead & lift etc (c) concrete grade 1:2:4 and msa-40mm(graded))

State Government

CTN :45669080

08 Jul, 2026 5.38 Lacs

Amreli - Gujarat

Tender For installation of various instruments and monitoring system at thebi irrigation scheme - supplying, installing, testing, and commissioning of a v-notch weir (mechanical flow measuring device) for measuring low flow seepage in dams. the device shall have a notch angle of 22.5°, 45°, 60°, or 90° depending on discharge range, a stainless steel ss-304 / ss-316 plate with thickness of 3–5 mm, and be suitable for measurement ranges of approximately 0–50 l/s depending on notch angle. the weir shall have ±1% full-scale reading accuracy, operate under 5–100% humidity, temperature −20°c to +60°c, and provide corrosion protection through anti-corrosion finish. complete in all respects as directed by the engineer-in-charge.with different sizes mentioned below: (1) 90° vnotch- 20 x 40 secticin 15 lit/sec, providing, installing and commissioning permanent ground control point (gcp) settlemnt marker comprising ms base plate (250×250×5 mm conforming to is 2062), gi riser pipe 25 mm dia (medium class as per is 1239), sand filling (clean river sand, loose), optional pvc/gi outer casing (min 100 mm dia), precast concrete cover (m20, 500×500×50 mm with central hole), ms/gi reference cap, and painting in black & white checkerboard pattern using weather-resistant enamel paint, complete with excavation, installation, alignment, and all materials, labour, tools, and accessories, suitable for survey works using total station / drone survey, complete as per specifications and direction of engineer-in-charge., providing & laying in position 'nominal mix' cement concrete using cement sand and crushed aggregate by machine mix incl. necessary formworks ,centering ,scaffolding compaction by mechanical vibrator curing as directed with all lead & lift etc (c) concrete grade 1:2:4 and msa-40mm(graded))

State Government

CTN :45675246

07 Jul, 2026 5.87 Lacs

Amreli - Gujarat

Tender For installation of various instruments at raidy & dhataravdi-1 irrigation scheme - item no.1:- providing, supplying, installing, testing, and commissioning of a v-notch weir (mechanical flow measuring device) for measuring low flow seepage in dams. the device shall have a notch angle of 22.5°, 45°, 60°, or 90° depending on discharge range, a stainless steel ss- 304/ss-316 plate with thickness of 3-5 mm, and be suitable for measurement ranges of approximately 0-50 l/s depending on notch angle. the weir shall have ±1% fullscale reading accuracy, operate under 5-100% humidity, temperature -20°c to +60°c, and provide corrosion protection through anti-corrosion finish. complete in all respects as directed by the engineer-in-charge. (1) 90° v-notch-20 x 40 secticin 15 lit/sec , item no.2:- providing, installing and commissioning permanent ground control point (gcp) settlemnt marker comprising ms base plate (250×250×5 mm conforming to is 2062), gi riser pipe 25 mm dia (medium class as per is 1239), sand filling (clean river sand, loose), optional pvc/gi outer casing (min 100 mm dia), precast concrete cover (m20, 500×500×50 mm with central hole), ms/gi reference cap, and painting in black & white checkerboard pattern using weather-resistant enamel paint, complete with excavation, installation, alignment, and all materials, labour, tools, and accessories, suitable for survey works using total station / drone survey, complete as per specifications and direction of engineer-in-charge. , item no.3:- providing & laying in position 'nominal mix' cement concrete using cement sand and crushed aggregate by machine mix incl. necessary formworks, centering, scaffolding compaction by mechanical vibrator curing as directed with all lead & lift etc. (c ) concrete grade 1:2:4 and msa-40 mm(graded)

Central Government/Public Sector

CTN :45178202

30 Jun, 2026 NA

Koraput - Odisha

Tender For corrigendum : tender for supply of tools from hal provided technology -transport frame , engine mounting stand , support tool , det 2 of tm2820g101 , balancing tool , blank , balancing inspection tool , measuring tool , measuring tool , dimension measuring tool , measuring tool , measuring tool g25-1 , measuring tool , dimension measuring tool , dimension measuring tool , measuring tool , measuring tool t33-1 , equipped metal container , set of blanks , lifting tool , assembly support , spanner , obus de guidage , spanner & immobilizer , orientation tool , setting / removal tool , flipping tool , assembly / dis-assembly tool , removal tool , removal tool , extractor , extractor turbine hp , dis - assembly tool , tool for removal of front drive gen , marking support , marking support , marking support , protector , protector , o-ring installation tool , outer duct bearing removal tool , generator transport buildup , installation & removal tool , air entry blank , sealing & connecting tool , blank , air entry blank , harness sheath , orientation tool , handling tool , blank for exhaust pipe , de-blading set , removal tool , o ring installation tool , shell for seal assy , shell for seal assy , axial loose centring , radial loose centring , axial loose centring , radial loose centring , radial loose centring , axial loose centring , radial loose centring , radial loose centring , radial loose centring , radial loose centring , radial loose centring , radial loose centring , radial loose centring , sealing check fixture , flow check tool , blank , relation tool , ring removal tool , wrench and immobilizer , wrench and immobilizer , measuring tool , extractor , extractor , extractor , name plate , fitting / removal tool , puller , extractor , blank , handling tool , extractor thp , bonding tool , centre blank , centre blank , handling tool , extractor , install/removal tool , dis-assy tool , measuring tool , static portion support

State Government

CTN :45585472

22 Jun, 2026 2.00 Lacs

Multi City - Telangana

Tender For 4th call - procurement, supply of tools and equipments for lascars and helpers pertaining to irrigation sub division no.4, pdpl, id4 manthani of ic-pdpl, peddapally district - supply of torch light (make: philips) multi functional long range with rechargable with 1 year warranty and 1 year extended warranty as directed by the engineer-in-charge. , supply of tool kit spanner set ring spanner 6-32 (make: taparia) as directed by the engineer-in-charge. , supply of sluice operating handle ( 1 small & 1 big for medium gear boxes for dps & ots) as directed by the engineer-in-charge. , supply of sickles/ kodavali (make:tata) as directed by the engineer-in-charge. , supply of shovel (make: tata) 10 number 1.8 kg as directed by the engineer-in-charge. , supply of safety helmet isi(make:karam) as directed by the engineer-in-charge. , supply of rain coats (make:zeel) as directed by the engineer-in-charge. , supply of platic big gamela (make:srp gold/pooja) as directed by the engineer-in-charge. , supply of nylon rope 16 mm yellow (30 metre) (make:cheeta) 24 kgs weight as directed by the engineer-in-charge. , supply of measuring tape 30m isi(make: freemans) as directed by the engineer-in-charge. , supply of hand gloves electric shock proof as directed by the engineer-in-charge.( for 11 kv including 13.615% contractor profit). , supply of hammers( make:tata) 2 lb weight as directed by the engineer-in-charge. , supply of gum boot safety steel toe double colour(make: big elephant) as directed by the engineer-in-charge. , supply of grease gun 5 kgs (make:capson) as directed by the engineer-in-charge. , supply of crow bar (make;tata) 25 mm as directed by the engineer-in-charge. , supply of cotton waste per kg as directed by the engineer-in-charge.( each lascar - 10 kgs) , supply of chain saw 22" petrol (make: forte ) (with 6 months warranty for bore & piston) as directed by the engineer-in-charge. , supply of axe with wooden handle (make: tata) 1400 grams weight (min supply of 1 box i.e. 12 pieces, no loose) as directed by the engineer-in-charge. , supply of 2hp 4 stroke grass cutter/brush cutter umk 450 t (make: honda) (with 1 year warranty for bore & piston) as directed by the engineer-in-charge

Central Government/Public Sector

CTN :45306043

20 Jun, 2026 40.00 Lacs

Jammu - Jammu And Kashmir

Tender For corrigendum : maintenance of day to day complaints of water supply including connected items at various loc under ge nagrota - m&l for repair/rectification of leakage to water supply distribution lines 15 mm dia to 25 mm dia gi tubing by necessary excavation, returning/filling as required, tightening of loose joints of union, elbow, socket etc, threading if required including replacement of gi union/socket/nipple as required complete all as specified and directed., all as per srl item no.1 above but for gi tubing of 40 mm dia to 50 mm dia complete all as specified and directed., all as per srl item no.1 above but for gi tubing of 80 mm to 150 mm dia complete all as specified and directed., all as per srl item no.1 above but for gi tubing /di /ci /ms of 150 mm dia to 300 mm dia complete all as specified and directed. note : (i) the complaints for the above works shall be registered by contractor at the water supply complaint cell of age e/m (ii) stationary required such as complaint book, job cards etc shall be arranged by the contractor and proper record shall be maintained by the contractor.(iii) tools ,plumber with helper and transport with driver for attending of above complaints shall be arranged by contractor. (iv) the rate quoted by the contractor for above jobs under item no 1 to 4 shall be inclusive of cost of works under note (i) to (iii) above. (v) the said complaints shall be rectified within 12 hrs of the registration of the complaints failing which recovery of rs.500/commplaint shall be made for contractors due payment (vi) the stores/item required for the works under item no 1to 4 shall be measured separately under relevant item as supply only. (vii) excavation, returning/ filling shall be measured and paid for separately and material required for the works above shall be included to quoted rates., excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m deep including getting out in hard/dense soil complete all as specified and directed., returning /filling including watering , leveling , spreading and well ramming in layers not exceeding 25cm thick complete all as specified and directed., removing excavated material to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 50 metre above the starting point complete all as specified and directed., refixing/relaying of old retrieved steel tubing in new or old position with and including new gi fittings (connections) and as per site requiremen laid in trenches, above ground level or in any position of following sizes as under complete all as specified and directed : -, 15 mm dia, 20 mm dia, 25 mm dia, 40 mm dia, 50 mm dia, taking down unserviceable gi tubing / upvc tubing from any position complete with all fittings & connections from any position of following sizes as under complete all as specified and directed :-, 15 mm dia, 20 mm dia, 25 mm dia, 40 mm dia, 50 mm dia, supply and fixing/laying & testing of galvanised steel water tubing, medium grade, isi marked complete with all new galvanized fittings of following sizes laid in trenches/ above ground level or in any position complete all as specified and directed :, 15 mm dia, 20 mm dia, 25 mm dia, 40 mm dia, 50 mm dia, supply and laying upvc pipe tubings medium grade pressure rating 10 kgf/cm2 isi mark with all fittings such as elbow, bends, sockets, nipples and union etc and fixed complete laid in trenches or in any other position of following sizes as under complete all as specified and directed , 20 mm dia, 25 mm dia, 40 mm dia, 50 mm dia, supply only gi fittings, medium grade, isi marked of following sizes as under complete all as specified and directed :-, union 15 mm dia, union 20mm dia, union 25mm dia, union 32mm dia, union 40mm dia, union 50mm dia, socket 15 mm dia, socket 20 mm dia, socket 25 mm dia, socket 40 mm dia, socket 50 mm dia, reducer socket 40mmx50mm, reducer socket 15mmx20mm, reducer socket 20mmx25mm, elbow 15mm dia, elbow 20mm di

CTN :45469583

16 Jun, 2026 NA

Kanpur - Uttar Pradesh

Tender For providing of custom bid for services - ---- custom bid for services - revalidation of fall arrestor at hpcl kanpur terminal- annual maintenance and revalidation of fall protection system installed at tlf gantry (16 lines), calibration shed (1 line), sealing tower (4 lines), ethanol u/l gantry (2 lines) and tw gantry, spur 1 (14 sections of 50 mtr each and tw gantry, spur 2 (14 sections of 50 mtr each). i. conduct a thorough inspection of the existing fall arrestor system and lifeline. ii. assess the current condition of all components, including harnesses, lanyards, anchors, and connectors. iii. identify any wear, damage, or defects that could compromise safety. iv. ensure the system complies with the latest safety standards and regulations (e.g., osha, ansi). v. verify that all components meet manufacturer specifications and industry requirements. vi. perform load testing on the lifeline and anchor points to verify their strength and reliability. vii. conduct a drop test to ensure the fall arrestor system functions correctly. viii. provide certification of revalidation, including test results and compliance documentation. ix. carry out necessary maintenance, such as lubrication of moving parts and tightening of loose components. x. repair or replace any damaged or worn parts to restore the system to optimal working condition. xi. document all repairs and replacements made during the revalidation process. xii. recommend and implement any necessary upgrades to enhance the safety and performance of the system. xiii. install additional safety features if required, such as shock absorbers or retractable lifelines. xiv. prepare a detailed report of the revalidation process, including inspection findings, test results, and maintenance performed. xv. maintain records of all certifications and compliance documents for future reference. xvi. schedule follow-up inspections to ensure continued compliance and safety. xvii. offer ongoing technical support and assistance as needed. xviii. lifting tools & tackles: vendor should get revalidation certification through a up factory competent person and submit all required documents to hpcl.

State Government

CTN :45443626

11 Jun, 2026 2.00 Lacs

Multi City - Telangana

Tender For 3rd call - procurement, supply of tools and equipments for lascars and helpers pertaining to irrigation sub division no.4, pdpl, id4 manthani of ic-pdpl, peddapally district--1 procurement, supply of tools and equipments for lascars and helpers pertaining to irrigation sub div least quotation 1.00 each 39000.00 39000.00supply of 2hp 4 stroke grass cutter/brush cutter umk 450 t (make: honda) (with 1 year warranty for bore & piston) as directed by the engineer-in-charge2 procurement, supply of tools and equipments for lascars and helpers pertaining to irrigation sub div least quotation 1.00 each 15800.00 15800.00supply of chain saw 22" petrol (make: forte ) (with 6 months warranty for bore & piston) as directed by the engineer-in-charge.3 procurement, supply of tools and equipments for lascars and helpers pertaining to irrigation sub div least quotation 1.00 each 6000.00 6000.00supply of grease gun 5 kgs (make:capson) as directed by the engineer-in-charge.4 procurement, supply of tools and equipments for lascars and helpers pertaining to irrigation sub div least quotation 1.00 each 2650.00 2650.00supply of tool kit spanner set ring spanner 6-32 (make: taparia) as directed by the engineer-in-charge.5 procurement, supply of tools and equipments for lascars and helpers pertaining to irrigation sub div least quotation 7.00 each 980.00 6860.00supply of gum boot safety steel toe double colour(make: big elephant) as directed by the engineer-in-charge.6 procurement, supply of tools and equipments for lascars and helpers pertaining to irrigation sub div elec-10.1.33, electrical items sl no.1857 7.00 pair 1136.00 7952.00supply of hand gloves electric shock proof as directed by the engineer-in-charge.( for 11 kv including 13.615% contractor profit).7 procurement, supply of tools and equipments for lascars and helpers pertaining to irrigation sub div least quotation 7.00 each 750.00 5250.00supply of safety helmet isi(make:karam) as directed by the engineer-in-charge.8 procurement, supply of tools and equipments for lascars and helpers pertaining to irrigation sub div least quotation 7.00 each 2000.00 14000.00supply of rain coats (make:zeel) as directed by the engineer-in-charge.9 procurement, supply of tools and equipments for lascars and helpers pertaining to irrigation sub div least quotation 7.00 each 500.00 3500.00supply of measuring tape 30m isi(make: freemans) as directed by the engineer-in-charge.10 procurement, supply of tools and equipments for lascars and helpers pertaining to irrigation sub div least quotation 7.00 each 160.00 1120.00supply of platic big gamela (make:srp gold/pooja) as directed by the engineer-in-charge.11 procurement, supply of tools and equipments for lascars and helpers pertaining to irrigation sub div least quotation 7.00 each 150.00 1050.00supply of sickles/ kodavali (make:tata) as directed by the engineer-in-charge.12 procurement, supply of tools and equipments for lascars and helpers pertaining to irrigation sub div least quotation 7.00 each 1550.00 10850.00supply of crow bar (make;tata) 25 mm as directed by the engineer-in-charge.13 procurement, supply of tools and equipments for lascars and helpers pertaining to irrigation sub div least quotation 7.00 each 750.00 5250.00supply of axe with wooden handle (make: tata) 1400 grams weight (min supply of 1 box i.e. 12 pieces, no loose) as directed by the engineer-in-charge.14 procurement, supply of tools and equipments for lascars and helpers pertaining to irrigation sub div least quotation 7.00 each 535.00 3745.00supply of shovel (make: tata) 10 number 1.8 kg as directed by the engineer-in-charge.15 procurement, supply of tools and equipments for lascars and helpers pertaining to irrigation sub div least quotation 7.00 each 1250.00 8750.00supply of hammers( make:tata) 2 lb weight as directed by the engineer-in-charge.16 procurement, supply of tools and equipments for lascars and helpers pertaining to irrigation sub div least quotation 70.00 kg 75.00 52

Deep Offset Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors