Get complete information related to latest Deep Screening Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Deep Screening Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Deep Screening Tenders.
Tender For custom bid for services - supply of spares for railway track maintenance contract at kandla foreshore terminal-schedule - a (supply of railway track material): 1, fish plate 60kg 1meter long, with bolt 12.00 pair, 2, fish plate 52kg 1meter long, with bolt 25.00 pair, 3, fish bolt 25x140 100.00 nos, 4, curved switch 52kg, 1:8.5 with fitting 1.00 set, 5, supply of 50mm ballast 900.00 mt, 6, supply of rail 60kg 3.922 mt, 7, supply of rail 52kg 13.491 mt, 8, check rail distance block 200.00 nos, 9, check rail bolt 25x190 full thred 225.00 nos, 10, single coil spring washar 500.00 nos, 11, j clip 750.00 nos, 12, grsp 5000.00 nos, 13, sleeper 60kg 40.00 nos, 14 juction fix plate 52 & 62 kg combination, 1meter long , (4plate called 1 set) 2.00 set, 9, 15 supply of cms x-ing 52 kg with checkrail &, fitting 1.00 set, 16, erc m-3 5000.00 nos, 17, gfn liner t-3702 (52kg rail & sleeper) 2500.00 nos, 18, ms liner t-3738 (52kg rail & sleeper) 5000.00 nos, 19 gfn liner t-3707 & 3708 (52kg rail & 60kg, sleeper) 2500.00 set, 4 sub-total for schedule - a, schedule - b (railway track work), 1 renewal of tongue rails & stock rails (straight or, curved) complete with fittings & fastenings,, ensuring proper housing & changing of stretcher, bars, if required; but excluding sleepers. work, also includes drilling of hole, if any required and, fixing of fish plates. released rails shall be, stacked at indicated place. {note : 1).one set, means two tongue rails and two stock rails (2), in case when only one tongue & stock rail are, replaced, only 50% of the quantity shall be, payable. (3) if only one tongue rail is replaced,, only 25% of the quantity of switch assembly shall, be payable} for respective item., 2.00 set, 2 deepscreening of track in terms of para-238 of, indian railways permanent way manual in other, than psc sleepers of any density and screening, of complete ballast section. it includes opening of, ballast, digging down to specified depth below, bottom of sleeper to provide formation slope of, 1:40 towards drain or any prescribed direction,, taking out caked ballast, muck etc. from entire, ballast section, putting back clean ballast as per, required ballast profile, throwing away screened, muck arising out of screening on toe of bank or, on cess, if low or on spoil banks above top of, cutting (including throwing and leveling, if, required beyond minimum 5m from the edge of, cutting which are upto 3m deep or alternatively, carting it upto 50m for disposing it off beyond, cutting or platforms) as per direction of engineer, in-charge, including cutting cess, if required for, effective drainage upto a distance of 3.5m from, centre line of track on both sides and including, one round of kutcha packing with screened, ballast including attending to track parameter to make track fit for 20 kmph speed. necessary, wooden blocks shall be brought by the, contractor. 450.00 trm, 3 through packing of track, as described in para-, 224 of indian railways permanent way manual - 1350.00 trm, 4 fabrication (including cutting & bending) and, fixing of check rails of all sections as per, railway s approved drawings & specifications for, level crossings / trolley paths, duly cutting rail, flanges, wherever required to correct alignment, and level with railway s rail, fittings & fastenings,, drilling of holes in heck rails with all fittings, e.g., rail screws / grip expansion bolts, brackets,, packing pieces, bolts, washers etc. and as, directed by the engineer in-charge, 192.00 rm, 5 providing and injecting approved grout in, proportion recommended by the manufacturer, into cracks/honey-comb area of concrete/, masonry by suitable gun/pump at required, pressure including cutting of nipples after curing, etc. complete as per directions of engineer-incharge. (the payment shall be made on the, basis of actual weight of approved grout, injected.) epoxy injection grout in concrete/rcc, work of approved, make, 50.0
Tender For complete track renewal with deepscreening, increasing ballast cushion and other miscellaneous works between nishangarha-dudhwa metre gauge section under the jurisdiction of aden/mln in connection with ctr-mg- 47.30 km work in nanpara-mailani section (km= 149.9-153 , 157.8-164.2 & 167.5-205.3 =47.30 km)
Tender For corrigendum : supply of - motor point machine for railway yard trs- motor point machine for railway yard trs description of materials and execution for installation, wiring & testing to operate the point machine at nalco rly yard as per eco.railway sepcfification. 1. supply of electric point operating machine 143mm non trailable to operate on 110v dc complete with lock detector, point junction box along with telescopic pipe and slides for lock and detector- rotary locking. universal type as per specification no: irs/s/24/2002 with latest amendment and drg. no.: rdso/s: 10800 (foc motor) along with standard tool kit set for every 4 point machines. (1no.) 2. supply of ground connection set complete suitable for rotary locking type irs electric point machine as per drg. no. s-3262 for 60kg rail with insulating materials with insulation materials. (1 set) 3. supply of junction boxes with covers and terminal plates 24/30 way to suit drg. no. 236967/1 (as amended up to date) and irs: s-10/78. this includes supply of pbt terminal. (1 nso.) 4. transportation, installation of point machine on ms plate fixed on wooden/psc/steel sleeper complete with fixing of anti-theft arrangement, "d" bracket, junction boxes, connection including smithy works involved for ground connection, including riveting/welding of angle cleats, termination of cables. preliminary adjustment for operation of points by crank handle oiling, greasing, painting and lettering as required. this also includes supply and fixing telescopic arrangement using gi pipes of required dia for provision of wires from junction box to point machine.(1 no.) 5. wiring and testing of electric point machine as per the wiring diagram supplied by the railway. this also includes the connection of electric point machine and fixing of insulation materials and providing two numbers of seven lever ( 7 lever) goderj locks with three keys each, per machine for outside cover, fixing arrangement of crank handle interlocking in point machine, and fixing of e type lock ( if required).(1nos.) 6. supply of steel apparatus case large size as per drg. no.- con/sk/1/186/ and spec no irs:s-10/78 (adv) with latest amend. with "e" type lock & key of ward no.-32 with handle. (1 nos.) 7. transportation, excavation of pit, casting of foundation, plastering and erection of steel apparatus case (full) with fixing of e-type lock, wiring, cable entry, termination, clamping filling cable pit with sand, painting and lettering etc., as per drg no. s & t/con/sk/16. this included earth work and/or masonry work required for securing the apparatus case as per site condition including supply of all required materials wire coils 6 way terminal pbt hylam sheet, wooden plank etc. (1 no.) 8. pvc insulated amoured, unscreened, underground railway signaling cable as per specification no. irs:s63/2014(rev.4.0) 12/core (250 mtrs) 9. excavation of trenches of depth 1.0m including clearing of roots and trees etc. for all types of soil. this work also including covering of cables laid in trench and backfilling, ranning and consolidation of soil as well as disposal of extra soil after cable is laid as specified in guidelines on signaling cable laying given by rdso and any latest circular.(100 mrtrs) 10. track crossing by horizontal boring method as per technical specification of manual as per feasibility of site condition including supply of dwc pipe or hdpe pipes. (18 mrts) 11. laying of signaling cable/power cable to extend the power of all sizes in excavated trench, etc. (0.5 km) 12. supply, transportation, installation, testing and commissioning of earth electrode, construction of cement enclosure to drg. no. con/sk/t/9a and drawl of 6 swg wire or 2 nos. of 8 swg wires from each electrode to place advised by the site engineer including fixing and soldering of lugs and measuring, painting of the earth resistance etc. (1 nos.) 13. supply of smr ower panel (minl ips) having smr module03 nos., dca card01, dc-dc convertor
Tender For execution of p.way works like trr(p), tsr(p), tbr, ttr (by tws & ors), renewal of sejs, glued joints, dowels & broken screw spikes, renewal of turnout sleepers, deepscreening of points & crossings, casual renewal of p&c sleepers, sej sleepers, dowels of p&c sleepers, reconditioning of inserts, replacement of broken screws, chair plates, fabrication of check rails, greasing of fishplates, opening of jammed ercs, grinding of rails, standardization of sand humps, dead ends & trolley refuges and other associated track works under the jurisdiction of senior section engineer/p.way(in-charge)/champa of bilaspur division.
Tender For execution of p.way works like trr(p), tsr(p), tbr, tfr, ttr (by tws & ors), renewal of sejs & glued joints, renewal of turnout sleepers, deepscreening of points & crossings, casual renewal of broken sleepers and other associated track works under the jurisdiction of senior section engineer/p.way(in-charge)/baradwar of bilaspur division.
Tender For execution of p.way works like trr(p), tsr(p), tbr, ttr (by tws & ors), renewal of sejs & glued joints, renewal of turnout sleepers, deepscreening of points & crossings to avoid mud pumping by t-28/bcm, deepscreening of coal choked yard lines and mid-section lengths to avoid mud pumping, casual renewal of broken sleepers, p&c sleepers, sej sleepers, dowels of p&c sleepers, reconditioning of inserts, replacement of broken screws, chair plates, fabrication of check rails, greasing of fishplates, opening of jammed ercs, grinding of rails, standardization of sand humps, dead ends & trolley refuges and other associated track works under the jurisdiction of senior section engineer/p.way(in-charge)/raigarh of bilaspur division.
Tender For execution of p.way works like trr(p), tsr(p), tbr, ttr (by tws & ors), renewal of sejs, glued joints, dowel & broken screw spikes, renewal of turnout sleepers, deepscreening of points & crossings, deepscreening of coal choked yard lines and mid-section lengths to avoid mud pumping, casual renewal of p&c sleepers, sej sleepers, dowels of p&c sleepers, reconditioning of inserts, replacement of broken screws, chair plates, fabrication of check rails, greasing of fishplates, opening of jammed ercs, grinding of rails, standardization of sand humps, dead ends & trolley refuges and other associated track works under the jurisdiction of assistant divisional engineer/brajrajnagar of bilaspur division.
Tender For south central railway: construction organization: earth work in formation, laying and linking of track, welding of rails, construction of platform, extension existing bridges, approach roads etc., for remodeling of yard arrangements for providing additional loop line and providing additional platform at nizamabad station.
Tender For supply of material and execution of indoor & outdoor work for provision of electronic interlocking-msdac based automatic block signalling system between marwar kori(excl.) to bhildi in connection with doubling of ln-smr-bldi section of jodhpur division of north western railway. the work involves provision of new electronic interlocking at malwara, raniwara, marwar ratanpur, jari, dhanera,ramsen,jenal stations & alteration in ei at odhava staion of north western railway & alteraion in ei at bhildi junction of western railway along with thirteen numbers of auto signalling huts . provision of msdac parallel with dc track circuit in yards & dual msdac in block section associated works like trenching & laying of signalling and telecom cables in pre-fabricated ducts/dwc/gi pipes, supply-installation of point machines, apparatus cases, electric lifting barrier gate, signals, track circuit equipment, earthing material, data loggers, eld, fuse alarms, fire alarms, passenger amenity telecom items etc.
Tender For execution of track work like tbr, plastic dowel removal , deepscreening of coal choaked line to avoid mud pumpimg, t/28/bcm and other track work under the jurisdiction of assistant divisional engineer/manendragarh of bilaspur division.