Latest deilvery table Tenders | Government deilvery table Tenders

Central Government/Public Sector

CTN :42122189

22 Oct, 2025 NA

Ganjam - Odisha

Tender For supply of bearing adopter, mtl. - is 210 fg 260 , bearing cap outer, mtl. - is 210 fg 260 , bearing cap inner, mtl. - is 210 fg 260 , bearing housing lantern, mtl. - is 210 fg 260 , casing cover, mtl. - astm a 743 cf8 , gland housing, mtl. - astm a 743 cf8 , laybrinth, mtl. - astm a 743 cf8 , stuffing box cover plate, mtl. - astm a 743 cf8 , support foot, mtl. - astm a 216 gr. wcb , deflector, mtl. - aisi 304 , impeller nut, mtl. - aisi 316 , shaft sleeve m. seal, mtl. - aisi 316 , pump shaft with keys, mtl. - aisi 316 , impeller, mtl. - astm a 743 cf8 , gasket set, mtl. - teflon , o ring set, mtl. - neoprene rubber , oil seal set, mtl. - synthetic rubber , bearing set, mtl. - bearing steel , volute casing, mtl. - astm a 743 cf8 , bearing bed, mtl. - is 210 fg 260 , complete fasteners except bearing, mtl. - is 1363 ms , mechanical seal plus gland plate, mtl. - std , auxillary pipe, mtl. - std

State Government

CTN :42095240

13 Oct, 2025 9.50 Lacs

Multi City - Karnataka

Tender For the brief scope of works involves supply, installation, testing and commissioning of mechanical over speed device for river bed unit 1 at bhadra generating station.dismantling of existing over speed device (osd, supply of new over speed device,modification of existing mechanical osd as per site requirement,replacing of any damaged fasteners, gaskets, and o-ring & oil seals if needed, replacing and modification of oil pipe lines as per site requirement, assembling of new osd and testing and commissioning for designed speed.

Central Government/Public Sector

CTN :42107579

20 Oct, 2025 57.54 Lacs

East Singhbhum - Jharkhand

Tender For supply of annual civil maintenance works at ucil narwapahar township for one year - earth work in excavation by mechanical means hydraulic excavator manual means over areas exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth lead up to 50 m and lift up to 1.5 m, as directed by engineer-in-charge. all kind of soil , filling available excavated earth excluding rock in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m. , providing and laying cement concrete in retaining walls, return walls, walls any thickness including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing a 1 ratio 3 ration 6 1 cement 3 coarse sand 6 20 mm stone aggregate nominal size , reinforced cement concrete work in beam,suspended floors,roofs, having slope up to 15 landings balconies, shelves,chajja,lintel,band,plain window sills,stsiarcase and spiral stair case above plinth level upto floor five level execluding the cost of centering,shuttering,finishing and reinforced with 1 ratio 1.5 ratio 3 1 cement 1.5 coarse sand 3 graded stone aggregate., centering and shuttering including strutting, propping etc. and removal of form for a) suspended floors, roofs, landing, balconies and access platform , steel reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding all complete up to plinth level. a) thermo-mechanically treated bars of grade fe-500d or more. , brick work with common burnt clay f.p.s. non modular bricks of class designation 7.5 in superstructure above plinth level up to floor v level in all shapes and sizes in a cement mortar 1 ratio 6 1 cement 6 coarse sand , brick work with common burnt clay f.p.s non modular brick of class designation 7.5 m superstures above plinth level up to floor v level in all shape and size in cement mortar 1 ratio 6 1 cement 6 coarse sand , half brick masonary with common burnt clay f.p.s non modular bricks of class designation 7.5 in superstures above plinth level up to floor v level cement mortar 1 ratio 4 1 cement 4 coarse sand, 12 mm cement plaster of mix 1 ratio 6 1 cement 6 fine sand rate for external plastic are for height upto 10 from grond level in less otherwise stated., repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq.mt and under incldingcutting the patches in proper shape raking out joints and preparing and plastering the surface of the walls complete as per directions of engineer-in -charge., neat cement punning. , providing and fixing 1st quality ceramic glazed floor tiles conforming to is 15622 thickness to be specified by the manufacturer of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by engineer in charge in skirting, risers of steps and dados over 12 mm thick bed or cement mortar 1 ratio 3 1 cement 3 coarse sand and jointing with grey cement slurry at the rate 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete. , white washing with lime to give an even shade a) satna lime wash on walls with one coat. , white washing with lime to give an even shade old work one or more coats, finishing walls with water proofing cement paint of required shade new work two or more coats applied at the rate 3.84 kg per 10 sqm , distempering with 1st quality acrylic distemper ready made having voc content less than 50 gm per ltr. of approved manufacturer and of required shade and colour complete as per manufacturers specification. one or more coats on old work , painting with synthetic enamel paint of approved brand and manufacture of req

State Government

CTN :41810989

03 Oct, 2025 NA

Karur - Tamil Nadu

Tender For corrigendum : fabrication and erection of ss protection shield for bed ash cooler use in boiler # 7 at energy mechanical at tnpl unit 1.

Central Government/Public Sector

CTN :41970685

14 Oct, 2025 NA

Jhansi - Uttar Pradesh

Tender For corrigendum : transportation of 19 nos. dry type transformers and mandatory spares from bhel jhansi to 4x225 mw arun-3 hep nepal by suitable mechanical low bed trailers, mechanical trailers, trucks.

CTN :41987695

08 Oct, 2025 NA

Udyogamandal - Kerala

Tender For manpower assistance for miscellaneous mechanical maintenance jobs in nas plant, filter bed and offsite area.

Central Government/Public Sector

CTN :42030407

06 Oct, 2025 NA

Thiruvananthapuram - Kerala

Tender For supply of 2d echo machine , c arm machine modular , central monitoring system , emergency recovery trolley , fetal doppler , five part haematology auto analyzer with loader , fowler bed semi auto mechanical , fowler bed semi automatic cot , high end patient monitor , mobile x ray digital , modular ot , normal ward beds mechanical , portable hand held xray machine , tmt machine , ultrasound machine , usg with colour doppler , wheel chair , x ray 500 ma

CTN :41829149

10 Oct, 2025 NA

Kanpur - Uttar Pradesh

Tender For supply of purchase of spares for resin transfer pump in cpu of turbine and auxiliary d d volute casing for sam turbo make cpu resin transfer pump , casing cover for sam turbo make cpu resin transfer pump , support foot for sam turbo make cpu resin transfer pump , pump shaft with keys for sam turbo make cpu resin transfer pump , impeller for sam turbo make cpu resin transfer pump , bearing cap inner for sam turbo make cpu resin transfer pump , bearing cap outer for sam turbo make cpu resin transfer pump , bearing adopter for sam turbo make cpu resin transfer pump , bearing housing lantern for sam turbo make cpu resin transfer pump , bearing bed for sam turbo make cpu resin transfer pump , gasket in 1 set is 5 nos for sam turbo make cpu resin transfer pump , o-ring for sam turbo make cpu resin transfer pump , oil seal set for sam turbo make cpu resin transfer pump , deflector for sam turbo make cpu resin transfer pump , sleeve for sam turbo make cpu resin transfer pump , eye bolt for sam turbo make cpu resin transfer pump , lock nut for sam turbo make cpu resin transfer pump , impeller nut with helicoil insert for sam turbo make cpu resin transfer pump , lock washer for sam turbo make cpu resin transfer pump , helicoil insert for sam turbo make cpu resin transfer pump , key coupling for sam turbo make cpu resin transfer pump , key impeller for sam turbo make cpu resin transfer pump , breather plug for sam turbo make cpu resin transfer pump , constant level oiler for sam turbo make cpu resin transfer pump , fastners set for sam turbo make cpu resin transfer pump , coupling rrs for sam turbo make cpu resin transfer pump , mechanical seal for sam turbo make cpu resin transfer pump , brg single row deep groove ball brg 6313 sam turbo make cpu resin transfer pump , brg double row angular contact ball brg 3313 sam turbo make cpu resin transfer p ) /bid number : gem/2025/b/6519682 * /dated: 12-09-2025 & & / bid document 1 / 29

corporations/Associations/Others

CTN :41508588

03 Oct, 2025 9.77 Crore

Pune - Maharashtra

Tender For request for bids for supply, installation and commissioning of slaughter house plant as per apeda standard - a: civil work items, dismantling the reinforcement cement concrete (r.c.c.) work 1:2:4 and sorting out the materials such as steel etc. as directed and stacking them within the specified lead as directed etc. complete., dismantling brick masonry in lime or cement mortar and stacking the material as directed with all leads, lifts etc., removing doors and windows with frames and stacking the materials as directed with all leads, lifts etc. complete., removing ventilators and small windows with frame and stacking the materials with all leads, lifts etc. complete., removing cement tiles, or marble or polished shahabad floor or dado without bed concrete including stacking the materials as directed with all leads, lifts etc. complete, removing purlins from roof including stacking as directed with all leads , lifts etc. complete., removing rafters from roof including the materials as directed with all leads , lifts etc. complete., removing queen post truss from roof and stacking the materials as directed with allleads and lifts etc. complete, removing galvanized iron (g.i.) or asbestos cement (a.c.) sheet roofing including purlins, principal rafters etc. including sorting serviceable and unserviceable materials, stacking the same as and where directed in the compound including scaffolding etc. complete., excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (lift upto 1.5 m.) by mechanical means, lift upto 1.50 m, excavation for foundation in hard murum including removing the excavated material upto distance of 50 meters beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (lift upto 1.50 m) by mechanical means, lift upto 1.50 m, excavation for foundation in hard murum including removing the cubic meter (cu.m) excavated material upto a distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (lift from 1.5 to 3.0m.) by mechanical means, excavation for foundation in soft rock and old cement or lime masonry foundations including removing the excavated material upto a distance of 50 metres beyond the building area and stacking as directed, including dewatering, preparing the bed for the foundation and necessary back filling with available earth/murum, ramming ,watering including shoring and strutting etc. complete. (lift from 1.5m to 3.0 m.) by mechanical means, lift upto 3.0 m, excavation for foundation in hard-rock by blasting including cubic meter (cu.m) trimming and levelling the bed by chiselling where necessary and removing the excavated material and stacking it in measurable heaps within a distance of 50 metres from the building area including dewatering and back filling with available earth/murum watering, ramming etc. complete. (lift from 1.5m to 3.0 m) by mechanical means, filling in plinth and floors with approved excavated materials available at site in 30 cm layers include- ing watering and compaction with plate compactor to required proctor density etc complete., filling in plinth and floors with contractors material/brought from outside and approved by engineer in charge in layers of 15 cm to 20 cm including watering and compaction etc. complete., providing dry trap / granite / quartzite gneiss 200 mm thick hard core metal spread in two layers each of 125mm thick crushed to 100 mm consisting of m

Deilvery Table Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

Central Government/Public Sector

State Government

Central Government/Public Sector

Central Government/Public Sector

corporations/Associations/Others