Latest descender Tenders | Government descender Tenders

Central Government / Public Sector

CTN :40962436

25 Jul, 2025 24.61 Crore

Panipat - Haryana

Tender For custom bid for services - rprc256204-rate contract for rotary equipment maintenance in p-25 units at panipat refinery-1. personal protective equipment (total marks - 80), i). whether p.e.e. used as per the contract standard., ii). p.p.e. compliance at site (% marks will be deducted as per the violation of each worker), iii). during the working period, at least 20% additional ppe by the contractor stock has been kept., iv). p.p.e. given to the worker by the contractor is recorded in a ppe monitoring register. contractor shall, have a detailed register., 2. training (total marks - 50), i). tool box talk has been provided to the contract workers and record maintained., ii). arrangement of safety training for contract workers (induction fire and safety training / on the job safety, training), iii). does the contractor ensure that all the workers are skilled as per the job given?, iv). does the contractor ensure that all contract workers are supervised directly by the competent person., 3. incident / injury / incidence of hair loss (total marks - 70), i). incident of near miss reporting by contract workers (1 point for each 20 under-miss reported, maximum, 20 points)., ii). unsafe act / unsafe condition noticed against contractor / contract employee., iii). first aid / fire incident / injury (10 for every first aid / injury), iv). major accident / major fire (100 every accident), 4. work permit (total marks - 100), i). all works done with valid work permit and clearance., ii). work permit violation (2 every work permit violation), iii). during the work, standard operating procedure (sop) was followed., iv). whether the standard equipment is used by the contractor., 5. safety incentives and awareness (total marks - 100), i). did the contractor motivate his employees on the basis of safety performance? whether the contractor, held a safety meeting with his employees and engineer in charge., ii). whether the contractor has promoted safety on the site to make the contract employees aware about, safety., iii). whether the contractor appointed a safety supervisor., iv). did the contractor or its worker get any appreciation award from the iocl management?, v). whether all the contract employees have been medically examined and their documents have been, submitted to the engineer in charge., .

State Government

CTN :40939749

28 Jul, 2025 NA

Awantipora - Jammu And Kashmir

Tender For supply of rappelling equipment items d d - rappelling rope , figure 8 descender , dynamic static rope , ascender jumar , mountaineering mittens , sports climbing shoes , carabiner , seat harness , full body harness , chalk bag , windproof jackets , windproof trousers

CTN :40331429

07 Jul, 2025 NA

Leh - Jammu And Kashmir

Tender For bid to ras construction of slithering platform with rock climbing surface single face - construction of slithering platform with rock climbing surface single face hight 50 ft plated 14ft x 6 ft sand pit at base 25ft x 25 ft , providing and fixing 10 ft x 10 ft shed at base of the tower , slithering rope , seat harness , gloves , carabineers , helmet , rock climbing shoes , giri giri , descender fig 8

CTN :40644564

10 Jul, 2025 NA

Mumbai - Maharashtra

Tender For corrigendum : supply of search and rescue equipment for sdrf e e - mechanical glove , rescue torch or led torches hesham industrial solutions or equivalent light weight and suitable for divers led diving torch light diving instruments or accessories and capacity 2200 mah , thermal imager , metal cutting circular saw , reciprocating saw , rescue light led , chain saw unbranded carbide tipped blade chain saw , diamond tip chain saw , poly sheet 400 , poly sheet 600 , portable generator perfect dg sets power generator dg set of 5 manual control panel , husqvarna pole saw hp or equivalent , husqvarna rescue saw or equivalent or rotary rescue saw , makita rod saw or equivalent , remote controlled lifebuoy , self contained breathing apparatus scuba , life buoy , life jacket , rope sealing , seat harness , chest harness , pully , horizontal piton , triangular piton , rock hammer , repelling rope , climbing rope , mitten pair , basket stretcher , descender 8 egpl aluminium double figure 8 descender , rock climbing helmet , protective safety footwear boot , rope ladder 100 feet , jumar , ice axe or multiple rescue axe , come along 1 point 5 tons , rock climbing gear tent , stoppers peak gear , sleeping bag , water poison detection kit , residual vapour detection kit , three colour detection paper , personal decontamination kit , latex gloves pair , casualty bag full , casualty bag half , medical triage set , pvc suits , a level suit , breathing apparatus set with spare cylinder , nbc first aid kit type a , nbc first aid kit type b , cordening tape , disaster management kit

Central Government/Public Sector

CTN :40927050

14 Jul, 2025 NA

Pune - Maharashtra

Tender For procurement of personal protective equipment ppe for mngl employees. - safety shoes (as per scope of work), safety helmet (as per scope of work), hi-visibility jacket (as per scope of work), earmuffs (as per scope of work), ear plugs (as per scope of work), safety goggles (as per scope of work), rain suit (as per scope of work), safety hand gloves (as per scope of work)

State Government

CTN :40458011

08 Jul, 2025 NA

Ranchi - Jharkhand

Tender For corrigendum : rate contract for supply of laboratory consumables (ntep) - group 1 - chemicals, drugs, and disinfectants, phenol crystals (carbolic acid), sulphuric acid, sodium hypochlorite, methylene blue, potassium dichromate, basic fuchsin, immersion oil liquid paraffin (heavy grade), sodium hydroxide, tri sodium citrate, disodium hydrogen phosphate, potassium dihydrogen phosphate (anhydrous), n-acetyl-l cystein, potassium permanganate(kmno4), formalin/ formaldehyde, magnesium sulphate, magnesium citrate (tribasic), asparagine, malachite green, glycerol, para nitro benzoic acid-, sodium chloride, middle brook 7h9 broth base, middle brook oadc enrichment media, brain heart infusion agar, silver nitrate, dimethyl sulfoxide, bovine serum albumin, sodium carbonate, oxalic acid, tween-80, tween 20, hydrogen peroxide, niacin strips, auramine o, zinc dust, hydrochloric acid, immunochromatographic test (rapid identificationtest) for mtb, group 2 drugs, rifampicin, isoniazid, ethambutol di hydrochloride, dihydro streptomycin sulphate, ofloxacin, ethioniamide, kanamycin sulfate, amikacin disulphate, capreomycin sulfate, levofloxacin, moxifloxacin, para amino salycylic acid (pas), linezolid, clofazamine, group 3- personal protective equipment (ppe), latex gloves (size- small), latex gloves (size- medium), latex gloves (size- large), nitrile gloves (size-small), nitrile gloves (size- medium), nitrile gloves (size- large), laboratory coats (size- small), laboratory coats (size-medium), laboratory coats (size-large), respirators (n95 mask), surgical gowns (size- small), surgical gowns (size- medium), surgical gowns (size- large), head cover, shoe cover, group 4a - pipettes tips for phenotypic use, 1-200 l pipette tips, 20-200 l pipette tips, 100-1000 l pipette tips, 100-1000 l pipette tips (long tip), pasteur pipettes (sterile individually packed), group 4b- pipette tips for molecular lab use, 1-10 l pipette tips, 1-20 l pipette tips, 1-200 l pipette tips, 20-200 l pipette tips, 10-100 l pipette tips, 100-1000 l pipette tips, pasteur pipettes, group 5- glasswares, culture tubes or universal glass bottles (mccartney bottles), slides, glass ware -round flat bottom flask -1 lit, glass ware for stain preparation measuring cylinder - graduated 100 ml, measuring cylinder-graduated 500 ml, measuring cylinder-graduated 1000 ml, glass stoppered bottles -250 ml, container for stain -250 ml polyethylene, flat bottom flask - 3 lit, flat bottom flask - 1 lit, pipette- glass graduated -1ml, pipette- glass graduated -2ml, pipette- glass graduated -5ml, pipette- glass graduated -10ml, glass beaker- 500ml, glass beaker- 250ml, bijou bottles, glass beads (3 mm), glass beads (5 mm), beaker- 250 ml, beaker- 100 ml, beaker- 500 ml, beaker- 1000 ml, glass test tubes, funnels - 5 cm diameter, funnels - 10cm diameter, funnels - 18cm diameter, volumetric flask - 50 ml, volumetric flask - 100 ml, volumetric flask - 1000 ml, 1 lit bottle - amber colour, 2 lit bottle- amber colour, 1 lit reagent bottle transparent, 2 lit reagent bottle- transparent, 500 ml reagent bottle- transparent, 250 ml. reagent bottle- transparent, petri dishes (glass), group 6- disposable items, 50 ml polypropylene (pp) tubes for centrifuge (sterile), 15 ml polypropylene (pp) tubes for centrifuge (sterile), micro-centrifuge tube, sterile with cap, 1.5 ml, cryo-vial, sterile with cap, 2 ml (for long term storage), cryo vial storage boxes, cryotag, bags for waste bin 60 litres, bags for waste bin 30 litres, bags for waste bin- 2 litres, single use syringes, sterile- 10 ml, single use syringes, sterile- 20 ml, syringe filter (0.22um) for single use, sterile, filter paper sheets (for work benches), single-use paper towels, 2 ml standard reaction tube, pcr tubes (0.2 ml), forceps, sterile, individually wrap,, petri dishes (plastic), disposable loops 10 l, group 7- general lab items, bunsen burner, safety gas tubing, test tube rack, loop holders, loop wire, loop wire, inoculation loops 4mm, inocul

CTN :40557104

02 Jul, 2025 NA

Shimla - Himachal Pradesh

Tender For bid to ras supply of artificial rock climbing wall with slithering platform - imported movable climbing holds , climbing wall with support frame , pre fabricated ms structure 12 x 5 x 3 mtrs , dynamic climbing rope , seat harness , screw carabiners , figure of 8 - descender , rappelling mittens , slithering rope

Central Government And Public Sector

CTN :40873660

22 Jul, 2025 NA

Bangalore - Karnataka

Tender For manufacture, supply and installation of cross beam girder (size of beam 11 meter long, cross section 500 mm height & 180 mm width approx.) of 3ton eot crane along with suitable long transverse ge ared motors 2nos as per rwf drawing no. 703402210640. note: 1. only crane manufacturers or their auth orized representatives with relevant expertise shall be eligible to participate in the tender. 2. the drawing attached is only for the general guidance. the supplier shall visit the rwf and take necessary data before c ommencing the work. 3. all raw materials necessary for the fabrication, including channels, plates, and stru ctural steel, shall be supplied by the supplier. 4. the supplier shall also be responsible for the transportatio n of all components such as the fabricated cross beam, hoist, channels, plates, etc., to the rail wheel facto ry (rwf), including both to and fro movements, and shall bear all associated transportation charges. 5. the supplier shall dismantling the existing electrical connections and the removal of the hoist assembly. proper support beams must be provided between the end carriages, and the cross beam (girder) must be carefully supported before the removal of mounting bolts. the cross beam should then be lowered cautiously to prev ent damage to surrounding equipment and shifted to the designated location. the temporary support beam for the end carriages shall be removed thereafter. 6. the supplier shall remove the existing long travel gea rbox along with its motor, and install a new gearbox and motor fitted with suitable gears and couplings. th e hoist is to be reinstalled in its original position, and all electrical connections must be restored accordingl y. once the mechanical and electrical installations are complete, the cross beam and associated structures shall be painted in yellow and black colors, adhering to standard safety norms for cranes. 7. rwf will provi de to the supplier with air, electricity, water, and welding/oxy-cutting consumables free of cost. however, t he supplier is required to supply all raw materials for fabrication and arrange all necessary tools, lifting tac kles, and handling equipment for the execution of the work. the supplier is also obligated to provide appro priate personal protective equipment (ppe) such as helmets, gloves, safety harnesses, and other safety gea r to all personnel working at the site. 8. after completion of all work, the supplier must conduct a load test of the crane and submit a valid load test certificate. throughout the execution, the supplier will be solely re sponsible for the safety of all workers engaged in the activity, and the entire work shall be carried out in co mpliance with applicable safety standards and rwf's guidelines. 9. the motor with gearbox for the lt mov ement shall have a minimum power of 1 hp, and its output speed shall be suitable to achieve an lt movem ent speed of at least 20 meters per minute. [ warranty period: 18 months after the date of delivery ]

Central Government/Public Sector

CTN :40874242

18 Jul, 2025 NA

Bhopal - Madhya Pradesh

Tender For supply, installation & commissioning of odysse power ascender/descender-pmx(petrol versi on) with transportation box & user manual- 01 each, make- acstafe or its equivalent. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :40842527

24 Jul, 2025 2.47 Lacs

Bardhaman - West Bengal

Tender For supply of personal protective equipment item 1 , personal protective equipment item 2 , personal protective equipment item 3 , personal protective equipment item 4 , personal protective equipment item 5 , personal protective equipment item 6 , personal protective equipment item 7 , personal protective equipment item 8

Descender Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government / Public Sector

State Government

Central Government/Public Sector

State Government

Central Government And Public Sector

Central Government/Public Sector

Central Government/Public Sector