Latest desert cooler scrap Tenders | Government desert cooler scrap Tenders

CTN :40950140

21 Jul, 2025 NA

Panchkula - Haryana

Tender For empanelment of firms for supply of greenhouse material and repairing of greenhouses - replacement of existing poly sheet on roof, sides, entry gate, corners, etc. , replacement of profile (aluminum material) , replacement of profile (gi material) , replacement of spring (gi) , replacement of thermal net under the roof (50%) , replacement of shade net under the roof (50%) , replacement of supporting wires (3mm) for thermal/ shade net , replacement of pulleys for thermal/ shade net , replacement of pulling rope for thermal/ shade net (plastic material, 8-10mm thick) , replacement of plastic locks for thermal/ shade net , replacement of insect proof uv stabilized on all ventilation portions. , replacement of rolling pipe for side vents (27mm) , fitting material-curtain clamps (2mm thickness) , replacement of cooling pads (26 ft 6 inch) , replacement of alloy aluminium frame water recirculation system for cooling pad (86 ft 6inch) , replacement of pvc drain pipe for water recirculation system in cooling pads (63-90mm as per requirement) , replacement of gutter (2mm) , replacement of rain water gutter end cap (dia. 4) made from gp sheet duly machine fixed with gi clamp nut bolt with pvc drain (at the end) , replacement of axial fans(1250mm, 1.5hp) , supply and installation of air circulation fans (400-500mm dia. ss body, sealed motor, air capacity 4400 cfm) , replacement of polycarbonate sheet (6mm) all sides and top , replacement of existing poly sheet on roof, sides, entry gate, corners, etc. , replacement of profile (aluminum material) , replacement of profile (gi material) , replacement of spring (gi) , replacement of thermal net under the roof (50%) , replacement of shade net under the roof (50%) , replacement of supporting wires (3mm) for thermal/ shade net , replacement of pulleys for thermal/ shade net , replacement of pulling rope for thermal/ shade net (plastic material, 8mm thick) , replacement of plastic locks for thermal/ shade net , replacement of insect net , replacement of bottom apron (160gsm, 1.5 m wide) , replacement of trellising system , replacement of gutter (2mm) , replacement of side vent rolling pipe (27mm) , fitting material-curtain clamps (2mm thickness) , replacement of rain water gutter end cap (dia. 4) made from gp sheet duly machine fixed with gi clamp nut bolt with pvc drain (at the end) , replacement of four-way foggers (28lph) , drip line dia. 16mm, in-line emitters with 30cm spacing, flow rate 2lph

Central Government/Public Sector

CTN :40957174

08 Jul, 2025 NA

Bangalore - Karnataka

Tender For supply of 1.5t 5 star split ac including green ac nominal marketing capacity as per bee sta r rating label (in ton): 1.5, technology of air conditioner :inverter ac variable speed, iseer (wh/wh) value s for compliance of green ac: not applicable for non green ac, rated voltage (in volts): 230 v, 1 phase, 50 hz, ac, unit mounting arrangement :indoor unit wall mount type, air conditioner compliance : ac, bee star rating of the product : 5, classification by function : cooling & heating (cooling and dehumidification during cooling mode), material of evaporator :copper, material of condenser :copper, ac machine warranty (in ye ars) :1, warranty on compressor (in years) :10 (for inverter ac)up to including 2 ton capacity, rated coolin g capacity (in watts) as peris:1391(part 2): 4750-5800, split air conditioner: conforming to is:1391 (part 2) latest, eco-friendly refrigerant: yes, refrigerant designation: r 32, refrigerant global warming potential (g wp): 675 (for r32), refrigerant ozone depletion potential is zero: yes, classification by function: cooling an d heating (cooling and dehumidification during cooling mode), heating capacity (in watts): 4750-5800, unit type: single split ( single indoor and single outdoor), compressor type: single split ( single indoor and sing le outdoor), compressor type: rotary type/dual or twin, material of evaporator: copper, material of conde nser: copper, material of air filter (on indoor unit): synthetic fibre, reusable air filter: yes, ac modes: turb o mode, auto clean mode, quiet mode, dry mode, eco saving, swing, timer, remote control features: time r ,fan speed control, on/off, additional features: sleep mode, auto off, auto restart, indoor temperature indicator, dust filter, auto air swing, virus deactivation technology,4 way auto air swing, nanotech coatin g on evaporator tubes, noise level: as per is:1391 (part 2) latest, environmental friendly paint: yes (paint does not contain heavy metals or their compounds include mercury(hg), lead (pb), cadmium (cd) and hexa valent chromium (cr), recycled plastic components: >80% by weight of total plastic components in produc t, marking on the split ac: as per cl.17.1.1 and as per cl.17.1.2 of is:1391 (part 2), mode of packing: packe d with recycled and biodegradable material, supply cord and the inter connecting cord between the indoor and outdoor unit: 1 m (pvc insulated sheathed cables as per is:694), accessories / installation kit with each split air conditioner: 3m cu connecting pipe (for wall mount type up to 2 ton),remote control, operating m anual, installation manual, no installation kit, warranty card- ac machine warranty (in years): 1, warranty on compressor(in years): 10 (for inverter ac) up to including 2 ton capacity, availability of type test report from govt. lab/nabl accredited lab /ilac accredited lab to prove conformity of the specification: yes. as pe r is:1391 (part 2) latest, test report number and date - must declare: nabl, agreed to furnish all the test re ports and certificates to buyer on demand: yes. refrigerant pipe of min 3 meters including min connecting cable of 3 mtrs, drain pipe and suitable ms stand (powder coated) along with nut and bolt for fixing outdoo r unit. [ warranty period: 12 months after the date of delivery ]

Co-operative

CTN :40914999

09 Jul, 2025 NA

Badaun - Uttar Pradesh

Tender For supplyn of general electrical goods and lighting - glas sleeve 01 sqmm, glas sleeve 02 sqmm, glas sleeve 03 sqmm, glas sleeve 04 sqmm, glas sleeve 05 sqmm, glas sleeve 06 sqmm, glas sleeve 07 sqmm, glas sleeve 08 sqmm, glas sleeve 10 sqmm, dowells make al. lugs all sizes rate as per ppl less, fiber glass cloth 7mile, cotton tape rate per roll 3/4", cotton tape rate per roll 1 , film coated leatherised paper 7 mile b& e class rate per kg, bectol red air drying varnish rate per kg, dr. beck insulating drying varnish elmo luft 1a, glass tape 1 " rate per roll, glass tape 3/4" rate per roll, no volt coil assembly with plunger for crompton greaves oil immersed manually starter 100 hp, film coated leatherised insulat ed new max paper rate per kg, silica flexible glass insulation wire 4mm, silica flexible glass insulation wire 6mm, silica flexible glass insulation wire 8mm, black insulating tape 3/4" rate per roll, al strip 12x40mm rate per kg, bkt sheet 12mm,1/8 ,1/4 rate per kg, mica coated leatherised paper 7mile rate per kg, empire tape 1 , empire tape 3/4", pvc tape steel grip jonson & jonson make rate per roll, hylum sheet all sizes rate per kg, pvc cooling fan ke/siemens/ngf/crompton make 01 hp, pvc cooling fan ke/siemens/ngf/crompton make 02 hp, pvc cooling fan ke/siemens/ngf/crompton make 05 hp, pvc cooling fan ke/siemens/ngf/crompton make 7.5 hp, pvc cooling fan ke/siemens/ngf/crompton make 10 hp, pvc cooling fan ke/siemens/ngf/crompton make 12.5 hp, pvc cooling fan ke/siemens/ngf/crompton make 15 hp, pvc cooling fan ke/siemens/ngf/crompton make 20 hp, pvc cooling fan ke/siemens/ngf/crompton make 25 hp, pvc cooling fan ke/siemens/ngf/crompton make 30 hp, connection plates ke/siemens/ngf/crompton make 1.5 hp, connection plates ke/siemens/ngf/crompton make 02 hp, connection plates ke/siemens/ngf/crompton make 03 hp, connection plates ke/siemens/ngf/crompton make 05 hp, connection plates ke/siemens/ngf/crompton make 7.5 hp, connection plates ke/siemens/ngf/crompton make 15 hp, connection plates ke/siemens/ngf/crompton make 25 hp, connection plates ke/siemens/ngf/crompton make 30 hp, connection plates ke/siemens/ngf/crompton make 40hp, connection plates ke/siemens/ngf/crompton make 60 hp, connection plates ke/siemens/ngf/crompton make 90/100 hp, d.b. connection plate 30 hp, d.b. connection plate 60 hp, bakalite terminal plate for fbc type switch l/t make 250 amp., bakalite terminal plate for fbc type switch l/t make 400 amp, bakalite terminal plate for fbc type switch l/t make 600 apm, three pin socket 5amp ancher/r.k.light make, three pin socket 15 amp ancher/r.k.light make, combind switch socket 5amp ancher/r.k.light make, combind switch socket 15 amp ancher/r.k.light make, terminal base connector 32 amp, terminal base connector 63 amp, terminal base connector 100 amp, oil switch infox make, slipering for 90 hp ke motor, carbon brush grade 80/20 50x40x20mm &40x40x20mm, carbon brush for cutter motor 2.2x32x40mm no 311, carbon brush for spray pond motor 40x30x15mm ecr -12, carbon brush for 40 hp ke motor 10x20x30mm, carbon holder for 90 ke motor, carbonbrush for 90 hp ke motor, carbon brush with tail 25x50x70mm, carbon brush for 250 hp ke motor with double tail 22x32x40mm, carbon brush for slipering ke motor 25x20x15mm, carbon brush for ke slipering motor25x15x10mm, diode hm 100 ratan shah make, diode 305 rk 120, diode mr 80 hm 100, diode umr 321 g diode hr 41-5 510, soldering wire18/ 20 swg, soldering iron 250 watt 230 volt, sealing wire 20 swg, soldering connector 2.5mm, regulator for dc indarc welding machine 350 mr 3000w 60 va, a.g. timer sr 101 0-50 sc 230 volt a.g. make, a.g. timer sr 101 r 230 volt 50 hz 0-5 mint, a.g. timer sr 101 r 230 volt 50 hz 0-12 mint, condensor 8 mfd assian make, usha/philips make capacitor 2.5 mfd 250 volt, usha/philips make capacitor 3.5 mfd 250 volt, usha/philips make capacitor 4 mfd 250 volt, usha/philips make capacitor 5 mfd 250 volt, usha/philips make capacitor 10 mfd 250 volt,

CTN :40922370

14 Jul, 2025 NA

Rajauri - Jammu And Kashmir

Tender For supply of element kit fuel filter , o ring injector sealing , assy thermostat , fuel delivery module , assy fan electrical , power steering pump assy , 25 point check charges , cooling fan shroud r nr , injectors four all r nr , veh diagnostics charge , fuel tank cleaning charge , fip hpp injectors repair charge , brake down assistance charge , wheel alignment charges , wheel balancing four , machine shop charges

CTN :40912180

24 Jul, 2025 9.79 Crore

Nagpur - Maharashtra

Tender For establishment of integrated analytical laboratory for demil plant - hot air oven, magnetic stirrer, heating cooling circulator, rotary evaporator with chiller and vacuum pump, ultrasonic cleaner, high speed orbital shaker, vacuum pump, peristaltic pump, benchtop ph meter with orp electrode & necessary buffers, electrode storage solution & electrode cleaning solution, dissolved oxygen meter, turbidity meter, bench top multi-parameter tester (conductivity, tds, salinity, ph), bod incubator, cod digestor system, vortex mixer, effluent sampling manifold (esm) with controlled cobustion chamber (ccc), analytical balance, laboratory balance, mini centrifuge machine, gyro shaker, melting point apparatus, electric bunsen burner, deep freezer, laboratory rrefrigerator, ultra-pure water purification system, muffle furnace, double distillation unit, probe sonicator, heating mantles, systematic design, partitions, equipment console with work and storage modules, chemical reagent console with work and storage modules, instrument console with work and storage modules, overhead storage console, extended office console, office console, file storage console, record management console, back positioning module, fire protection modules, fume closet, exhaust manifold, power reserve (40 kva), elemental (chnso)analyzer, inductively coupled plasma - mass spectrometer (icp-ms), microwave digestion system, amc cost for 1st year after expiry of warranty period, amc cost for 2nd year after expiry of warranty period, amc cost for 3rd year after expiry of warranty period

CTN :40908075

24 Jul, 2025 NA

Mumbai - Maharashtra

Tender For supply and installation of training items for mechanic electric vehicle trade under craftsman training scheme (cts)at consignee locations - steel rule - 300 mm, graduated both in metric and english unit, steel rule - 600 mm, graduated both in metric and english unit, gloves - rubber, industrial/ safety shoes, industrial helmet, v block - 75 x 75 x 50 mm with clamp, v block - 150 x 100 x 75 mm with clamp, micrometer - outside, 0 mm to 25 mm, lc = 0.01 mm, micrometer - outside, 25 mm to 50 mm, lc = 0.01 mm, vernier caliper - 0 mm to 180 mm, lc = 0.02 mm with fine adjustment, micrometer: inside, 5 mm to 30 mm, engineer s square - 150 mm blade, engineer s square - 300 mm blade, angle plate - adjustable - 250 x 250 x 300 mm, spirit level - 150 mm, file - warding, smooth, 150 mm with handle, file - knife edge, 150 mm with handle, file - cant saw, smooth, 150 mm with handle, file - feather edge, 150 mm, file - triangular, smooth, 150 mm with handle, file - round, second cut, 200 mm with handle, file - square, second cut, 150 mm with handle, file - square, second cut, 250 mm with handle, file - triangular, second cut, 200 mm with handle, file - flat, second cut, 250 mm with handle, file - flat, bastard, 200 mm with handle, file - flat, bastard, 300 mm with handle, file set - needle, 160 mm, set of 12, file - half round, second cut, 250 mm with handle, file - flat, bastard, 250 mm with handle, file - round, bastard, 250 mm with handle, file - flat, second cut, 150 mm with handle, file - car body, bastard cut without tang, 300 mm with handle, oil stone - 150 mm x 50 mm x 25 mm, plier - combination, 200 mm, blow lamp - 0.5 liter, spanner set - double ended, 6 mm to 32 mm, set of 12, spanner - adjustable, 150 mm, spanner set - box type, 6 mm to 32 mm, set of 12, magnifying glass - 75 mm, clamp - toolmaker, 50 mm, clamp - toolmaker, 75 mm, clamp - c, 50 mm, clamp - c, 100 mm, scraper set - 200 mm, triangular, half round and flat, chisel - diamond point, 9 mm x 150 mm, chisel - cold, 20 mm x 150 mm, chisel - cold, round nose, 9 mm x 100 mm, motorized tenon saw, hammer - ball peen, 800 grams with handle, hacksaw frame - adjustable, 250 mm to 300 mm, hacksaw blade - length = 300 mm, width = 12.5 mm, thickness = 0.63 mm, tpi = 18, low alloy, packet of 100 blades, hammer - nylon, 30 mm with handle, precision screw driver - set of 6, screw driver - insulated, 10 x 250 mm, screw driver - insulated, 4 x 150 mm, screw driver - insulated, 6 x 150 mm, screw driver - insulated, 8 x 200 mm, screw driver - insulated, 8 x 300 mm, screw driver - philips, set of 5, neon tester - 500 v, portable electric impact drill machine, metal cut-off circular saw: floor standing, portable electric hand grinder: straight, portable electric air blower, portable electric jigsaw, portable electric random orbital sander, digital torque wrench - 20 nm to 280 nm, lifting tackle/ sling: 1 ton, 2 meters, air impact wrench with impact sockets, laser light pen: green, surface plate - cast iron, 600 x 600 mm with stand and cover, screw pitch gauge set - metric and british, 0.25 to 6 mm, 21 leaves, laser distance measuring instrument, palm scale: table top, 1000gm, allen key set - hexagonal, 1.5 mm to 10 mm, set of 9, universal quick adjustable multi-function wrench spanner set, 1/2 inch socket set, two post car lift - capacity 4 ton, electric operated, two wheeler scooter assembly set, transmission gearbox trainer, demonstration board: electric vehicle cooling system, mini commercial electric vehicle chassis, engine and transmission system for electric vehicle, cut section of electric vehicle motors, hvac trainer, multifunction installation tester, electric vehicle service equipment test adapter kit, ac ev charger setup, battery tester with inbuilt printer, lighting and wiring system for electric vehicle, instructor/ office chair - non-revolving, mid back, mesh, instructor/ office table, green board - 4 x 6 feet, stool - height 600 mm, working table - 8 (l) x 4 (w) x 3 (h) feets,

State Government

CTN :40832432

10 Jul, 2025 NA

Karur - Tamil Nadu

Tender For corrigendum : dismantling and fabrication of louver column assembly in cooling tower for vapour absorption machine (vam)

CTN :40917174

09 Jul, 2025 NA

Multi City - Multi State

Tender For supply and installation of new ro & uv both ss304 drinking water coolers with built in water purification system of storage capacity 150 ltrs, cooling capacity, ltr/hr 150, purification capacity, ltr/hr 150 ,220-240v ac, water filter type ro & uv both, condenser material copper, number of free services during warranty 2, warranty of machine 1 year or more, certification iso, conform to is 1475-i or latest, evaporato r material pure copper, make- any is standard indian make. [ warranty period: 30 months after the date of delivery ]

State Government

CTN :40889144

10 Jul, 2025 7.59 Lacs

Diamond Harbour - West Bengal

Tender For urgent requiretment of 2 nos. 16.5 kw/ 5.0 tr cooling capacity concealed split ac machine with allied electrical installation works at server room, department of it personnel, computer server room at 3rd floor of ronald ross building within the comp

State Government

CTN :40890083

04 Jul, 2025 5.00 Lacs

Rajsamand - Rajasthan

Tender For supply of cattle feed unit- - cattle feed unit (specification) , feed grinder/mixer , pellet mill/extruder , dryer/cooling system , screening machine , packaging & weighing machine

Desert Cooler Scrap Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Co-operative

State Government

State Government

State Government