Latest desk tidy Tenders | Government desk tidy Tenders

Central Government And Public Sector

CTN :40485639

20 Jun, 2025 NA

Bongaigaon - Assam

Tender For supply, installation, testing and commissioning of isolation switches for starting battery in se t for power car as per rdso modification sheet no. rdso/pe/ms/ac/0086-2022 (rev.0). each set of work in cludes supply, installation, testing and commissioning of isolation disconnector switch with fuse of approve d make which includes following items: 1. switch disconnecting fuse (sdf) 2 pole 315 a 415 v insulation sui table for 690 volts with 315 a 415v breaking capacity minimum 100 ka rating fuse and metallic cover, the switch disconnector of make l&t (ck910070009 -sf94234), siemens (3kx8345-4ac- 3kl8331-2ua00-3na3 3520rc), abb or schneider -28 nos. 2. copper cable 120 sq mm as per rdso specification no. elrs/spec/ elc/0019,(rev-1) -448 mtr 3. fuse link sf 94234 315 a-56 nos. 4. pa-6 flexible conduit pipe of size nw-29 as per rdso specification rdso/pe/spec/ac-0138-2009 (rev 1) for 120 sq. mm copper cable -448 mtr. 5. cable glands- 56 nos. 6. control cable length - 700 mtr. [ warranty period: 30 months after the date of delivery ]

Central Government / Public Sector

CTN :40475539

19 Jun, 2025 NA

Secunderabad - Telangana

Tender For supply, installation & commissioning of hydraulic job clamping wise for fixing of avm pads to 60kva lhb ac transformers on table (with work table, power pack, panel box & clamping wise with cylinder) with accessories consisting the following items and drawing en closed. 1) work table of size:1900x800x750 with top ms sheet of 8mm thickness 2) clamping wise with cylinder (heavy duty). 3) hydraulic p ower pack of electrical pump operated for hydraulic operation with foot pedal switch with 3hp motor, 5lpm pump, m28 coupling, bell hou se, manifold block, valve 240v, relief valve, suction strainer, breather, oil level indicator, pressure gauge, 70lts reservoir, oil grade syste m-68, electrical control panel with electrical safety for men working and equipment. [ warranty period: 30 months after the date of deliver y ]

State Government

CTN :40448406

30 May, 2025 1.83 Crore

Kalaburgi - Karnataka

Tender For providing furniture to govt. coaching center ground floor auditorium room at atal bihari vajpayee layout in kalaburagi taluka under kkrdb macro for the year 2023-24. - acoustical wall paneling with square, supplying of tr invertor typesplit air conditioners, installation charges for split type air conditioner, supplying erecting testing and commissioning of voltage, polyester curtains, rectangular high density polyethylene, cpvc pipes, sinking of borewell of 165mm dia 50mtr, sinking of borewell of 165mm dia 100mtr, sinking of borewell of 165mm dia 150mtr, supply of isi mark 175mm nominal bore, ms casing caps, filter casing pipes, single phase pump sets, hdpe pipes, pvc insulated cable, gatevalve, non return valve, common control panel, new power capacitor, mcb1, labour charges for erection, labour charges for erection of indoor, steel wire cable, earthing wiring, midea split air conditioner, stainless steel adjustable shower curtain, princeboard magnetic green dry erase writing board, v j interior modular table with particle board table, indo modular table, h tech systems chair frame type cantilever full writing pad, elcor projector screen, ahuja speakers, laboratory steel furniture island bench with table top, high end wooden podium with mic holder, elegant style legs office chair, eliante other cuptype

CTN :40450002

13 Jun, 2025 NA

Jhansi - Uttar Pradesh

Tender For supply of pvc flat cable, copper conductor with pvc insulation and sheath as per is 694 (q3) , unplasticized pvc pipes for potable water supplies as per is 4985 (q3) , fixed capacitors (fixed capacitor for single phase ac electric fan) as per is 1709:1984 (q3) , commercial cpvc pipe fittings (q3) , m - seal as per is 9197 (q3) , ceiling rose - is 371 (q3) , ss wire cloth 0.36 mm in nominal dia of wire average width of aperture 1.40 mm, 1.2x15 mtr roll, 25kg each roll , plywood 2400x1200x12mm thick bwr grade , 9 ply , motion sensor based auto dim type street light of wattage120w , motion sensor based auto dim type street light of wattage 90 w , pvc internal flushing kit with float and handle for single flushing cistern of capacity 10 liter , sofa cushion 22 in x21 in x4 in with cover of density 40, , motion sensor based auto dim type street light of wattage 70 w , motion sensor based auto dim type street light of wattage 60 w , plywood 2400x1200x18mm thick bwr grade, 12 ply , plywood one side teakface 2400x1200x6mm thick bwr grade, 4 ply , plywood 2400x1200x9mm thick, bwr grade, 6 ply , plywood one side teakface 2400x1200x12mm thick, bwr grade, 7 ply , pvc kurb stone with light red and white color , brass spindle for bib cock 15 mm , plywood 2400x1200x4mm thick, bwr grade , plywood one side teakface 2400x1200x9mm thick, bwr grade, 9 ply , plywood one side teakface 2400x1200x4mm thick, bwr grade , brass spindle for pillar cock 15 mm , plywood 2400x1200x6mm thick, bwr grade, 4 ply , glass shelf assembly made of 5.5mm thick, 500 or 450 x 125 mm size , lt line spacer 4 wire , rubber door seal 1.2mtr long , tarpentine oil in one litre bottle , pvc swr bend suitable for 110 mm pipe , brass spindle for concealed stop cock 15 mm , pvc flush bend pipe 600mm for high level flushing cistern , mirror for table dressing gents 380mmx760mmx5mm , varnish clear in one litre pack , brass half round spindle for bib cock , pvc flush bend pipe for low level flushing cistern , ss floor door stopper 140 mm long , mortice lock vertical type 200mm size, 6 lever for aluminium door , lt line spacer 3 wire , ht fuse wire 20amp , ht fuse wire 15amp , ht fuse wire 25amp , rubber washer for 10 litre flushing cistern , lt line spacer 2 wire , ms helical ordinary rat tail rod pattern springs of size 300mm

CTN :40013312

26 May, 2025 NA

Leh - Jammu And Kashmir

Tender For bid to ras supply of furniture items - double bunk of size1830mm l x 930mm w x 1830mm h fabrication and supply of double bunk ms of size1830mm l x 930mm w x 1830mm , steel almirah hight more than 1260mm width more than 450mm length more than 750mm , cotton sandwich mattress size 1800mm 900mm 100mm the pu foam density of the mattress should be 40kg oblique 3kg and above incl mattress cover made of poly fabric 15 mm thick , cotton sandwich mattress size 2000mm x 900mm x 100mm the pu foam density of the mattress should be 40 kg oblique 3 and above incl mattress cover of 15mm thick made of polyfebric and waterproof , storage rack shall be fabricated of size 1524mmx610mm and height 2135mm with four compartments the complete frame work will be made of using ms angle of section 40mmx40mmx5mm thick , stainless steel single bunk of size 2000mm l x 900 mm w x 400mm h and 900mm h at head side and leg side as shown in drawing and stainless steel will be of grade 304 , steel cupboard height more than 1930mm width more than 440 mm length more than 905 mm , steel almirah height more than 1930mm width more than 440 mm length more than 905 mm , racks of size 1000mm x 600mm of height 915mm with two compartments , pvc chairs with cushion at bottom and back rest plastic , study table size 1050mm x 750mm x 750mm manufacture and supply of study table of size 1050mm x 750mm x 750mm shall be provided length x width x height made of mild steel , office table size 1500mm x 900mm x 750mm manufacture and supply of office table of size 1500mm x 900mm x 750mm shall be provided length x width x height made of mild steel , office chair executive medium back with nylon base armrest and adjustable height or equivalent in design and specifications complete pilot sample of office chair complete , computer table manufacture and supply of computer table of size 1200mm x 600mm x 750mm length x width x height , computer chair executive medium back with nylon base without armrest and adjustable height and specifications complete in all aspects pilot sample of computer chair complete , cotton sandwich mattress covers 1800 x 900x18 mm waterproof polyurethane

Central Government And Public Sector

CTN :40437004

31 May, 2025 NA

Kapurthala - Punjab

Tender For supply and installation of office furniture for different locations of ihb up state - executive table with pedestaloverall size executive table top 25 mm ppb , 0.6 mm thick post formed laminate , 1 mm thick bdl , 2 mm pvc , modesty 18 mm thick ppb , clad 1.0 mm dl size : 1800 w x 900 d x 740 h size shall be 1800 width mm x 900 depth mm x 740 height mm .table top shall be 25 mm thick plain particle board (ppb) clad with 0.6 mm thick post formed laminate and 1 mm thick backing laminate (bdl) .flat edge duly sealed with 2 mm thick pvc beading. the modesty shall be 18 mm thick plain particle board ( ) ppb clad with 1.0 mm thick decorative laminate (dl) on both sides. edge sealed with 2 mm thick pvc beading. with standard size pedestal, executive chairoverall size mid back back: 47.7 cm. (w) x 60.1 cm. (d), seat: 47.0 cm. (w) x 48.0 cm. (d)overall dimensions of chair seat height -43.1-53.1cm height -96.5-114.0.cm. width & depth of chair as measured from base - width-76.1 cm and depth-76.1 cm 1) seat assembly : the cushioned seat should be made of injection molded plastic outer & inner. plastic inner should be upholstered with leatherette and moulded high resilience (hr) polyurethane foam of density 45 2 kg/m3,and hardness load 16 2 kgf as per is:7888 for 25% compression. seat size : 47.0 cm. (w) x 48.0 cm. (d) 2) back assembly: the cushioned back should be made of pu foam with insitu molded ms e.r.w round tube of size 1.9 0.03cm x 0.16 0.0128cm. it upholstered with leatherette.(d) *mid back size: 47.7 cm. (w) x 60.1 cm. (d) 3) armrests (fu3301/fu3302) : the armrest top should be moulded from polyurethane(pu) and mounted on to a drop lift adjustable type tubular armrest support made of 03.81 0.03 cm x 0.2 0.01 cm thk m.s. e.r.w tube having chrome plated finish. the armrest height adjustable up to 6.5 0.5cm in 5 steps. 4) active bio-synchro mechanism (fu3301/fu3302): the adjustable tilting mechanism should be designed with the following features: 360 revolving type. front-pivot for tilt with feet resting on ground and continuous lumbar support ensuring more comfort. tilt tension adjustment can be operated in seating position. 5-position tilt limiter giving option of variable tilt angle to the chair. seat/back tilting ratio of 1: 2 the mechanism housing should be made up of hpdc aluminium black powder coated. 5) seat depth adjustment (fu3301/fu3302): seat depth adjustment should be integrated in the seat through a sliding mechanism. seat depth adjustment range should be of 6.0 0.5 cm. 6) adjustable back support (fu3301/fu3302): back frame should be connected to the up/dn mechanism housed in plastic t spine. it can be adjusted in the range of 7.42 0.5 cm for the comfortable back support to suit individual need. 7) pneumatic ht. adjustment (fu3301/fu3302): the pneumatic ht adjustment has an adjustment stroke of 10.0 0.3 cm. 8) pedestal assembly (fu3301/fu3302): the pedestal should be high pressure die cast polished aluminium and fitted with 5 nos. twin wheel castors. the pedestal should be 65.0 0.5cm. pitch-centre dia.(75.0 1.0cm. with castors.) 9) twin wheel castors: the twin wheel castors should be injection moulded in black pp having 6.0 0.1cm wheel diameter., visitor chair with armsoverall size visitor: back: (w)47.5 cm x (h)58.0cm, seat : (w)47.0cm x (d) 48.0cmoverall dimensions of chair seat height - 46.5cm.height - 89.5cm. width & depth of chair as measured from pedestal - width-61.4 cm and depth-64.5 cm. 1.seat/back assembly: the seat and back should be made up of 1.2 0.1cm. thick hot-pressed plywood and upholstered with fabric upholstery covers and moulded polyurethane foam. the back foam should be designed with contoured lumbar support for extra comfort. the seat has extra thick foam on front edge to give comfort to popliteal should be a.back size 47.5 cm. (w) x58.0 cm (h) seat size 47.0 cm. (w) x 48.0 cm. (d) high resilience (hr) polyurethane foam: the hr polyurethane foam should be moulded with density = 45 2 kg/

Central Government/Public Sector

CTN :40434323

30 May, 2025 NA

Lucknow - Uttar Pradesh

Tender For supply of elbow, size 40 mm, ms galvanised specification no: - is: 1239 (part 2):2011, fifth revi sion (reaffirmed:2021,incorporating 05 amendments), table-8. [ warranty period: 30 months after t he date of delivery ]

Central Government/Public Sector

CTN :40434382

19 Jun, 2025 NA

Mysore - Karnataka

Tender For supply of elbow equal ms galvanized of nominal size 15mm to is:1239 (part2) 2011 table-8 for heavy grade pipe of nominal bore 15mm to is:1239 (part-1) 2004 table-5 with erw/hfs/hfiw type of manufacturi ng process [ warranty period: 30 months after the date of delivery ]

CTN :40434230

03 Jun, 2025 NA

Kharagpur - West Bengal

Tender For supply of punched washer (m.s.) : m20. matl.& specn : is: 2016/1967, amendment -4/1982, table- 2, type-a and is:1079/2017, rev.-7, gr.-hr1. [ warranty period: 30 months after the date of delivery ]

CTN :40427134

11 Jun, 2025 NA

Ghaziabad - Uttar Pradesh

Tender For supply of furniture -the seat is made of 1.4cm thick hot pressed plywood upholstered with fabric and moulded polyurethane foam. it has aseat depth adjustment of 5cm integrated in the seat through a sliding mechanism. seat size shall be 50cm x 49cm. theback is injection moulded in glass filled polyamide which is upholstered with mesh fabric. the back consist of adjustablelumbar support made of injection moulded polypropylene having an adjustment of 6cm. back size shall be 50cm x 68cm.the polyurethane foam for seat is of density 55 kg per meter cube. the three way adjustable armrests is made of glassfilled polyamide arm structure with pu armtop and height adjustment of 7cm. the armtop has swivel and to and fromotion. the inner tube of armrest is chrome plated. it shall have center tilt synchro mechanism, 360 degree revolvingtype, 3 position locking system with anti-shock feature. the headrest is injection moulded in glass filled polypropylenewhich is upholstered with foam and fabric. the pneumatic height adjustment is chrome plated with an adjustmentstroke of 9cm. the pedestal is high pressure die cast polished aluminium and fitted with 5 nos. of twin wheel castors.the pedestal is 65cm pcd. the overall dimension of the chair shall be 75cm x 75cm x (115-130cm). seat height shall be44.5cm to 53.5cm.this shall come with sliding seat, which helps user adjusting the seat depth as per the user size andneeds. the product shall be certified with the following: cii greenpro, ul greenguard, scs indoor advantagegold, bifma level 2. the work shall be done strictly as per drawing and direction of engineer-in-charge , the seat is made of 1.4cm thick hot pressed plywood upholstered with fabric and moulded polyurethane foam. it has aseat depth adjustment of 5cm integrated in the seat through a sliding mechanism. seat size shall be 550cm x 49cm. theback is injection moulded in glass filled polyamide which is upholstered with mesh fabric. the back consist of adjustablelumbar support made of injection moulded polypropylene having an adjustment of 6cm. back size shall be 50cm x 68cm.the polyurethane foam for seat is of density 55 kg per meter cube. the three way adjustable armrests is made of glassfilled polyamide arm structure with pu armtop and height adjustment of 7cm. the armtop has swivel and to and fromotion. the inner tube of armrest is chrome plated. the chrome plated tubular frame is made of dia. 2.8cm x 0.2cmthick ms round tube. the frame is fitted with plastic caps made of injection moulded glass filled polypropylene. theoverall dimensions of the frame shall be 63.5cm x 59.5cm x 97.5cm. the seat height shall be 42.5cm. the product shallbe certified with the following: cii greenpro, ul greenguard, scs indoor advantage gold, bifma level 2. thefurniture quotation for ae & je civil - hindan airforcefor assistant engineer room:2work shall be done strictly as per drawing and direction of engineer-in-charge. , providing and placing in positionmain table with side table. overall size shall be 2350mm(l) x 1200mm(d) x 750mm(h) with sidetable of size 1250mm(l) x 500mm(d) x 750mm(h). the main table and side table tops are made of 25mm thick mdf with bottomside pre-laminate board confirming to is-14587:1998 and 0.4mm pvc membrane pressed on to top. soft closing access flap withinbuild power box are provided on work surface for wire management. the modesty panel is made of 25mm thick mdf - one side prelaminate board confirming to is-14587:1998 with 0.4mm pvc membrane pressed on to top. the understructure is made of 25mmthick pre-laminated twin board of e1-p2 grade and approved shade confirming to is-12823:1990, edge banded with matching 2mmthick pvc lipping. the drawer unit is made of 25mm thick pre-laminated twin board of e1-p2 grade and approved shade confirmingto is-12823:1990, edge banded with matching 2mm thick pvc lipping. drawer units - drawer fronts made of 25mm thick mdf oneside pre-laminate board confirming to is-14587:1998 with 0.4mm pv

Desk Tidy Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government And Public Sector

Central Government / Public Sector

State Government

Central Government And Public Sector

Central Government/Public Sector

Central Government/Public Sector