Latest desoldering pump Tenders | Government desoldering pump Tenders

Central Government/Public Sector

CTN :41234235

30 Jul, 2025 NA

Murshidabad - West Bengal

Tender For hiring of welding machine, chain pulley block and accessories at 1x660 mw u-5 sagardighi thermal power project

State Government

CTN :41234048

04 Aug, 2025 NA

Chaibasa - Jharkhand

Tender For quotation for rate of c/f pump (clear water) and its accessories at saraswatipur rwss - supplying ,installation and commissioning of multi stage/ horizontal split casing/multi stage centrifugal pump (make: kirloskar / wpil/jyoti/ mather & platt) rating-15 kw/20hp as per is:5120, capable for discharging 72 m3/hr against a head of 40 m , consisting of bronze impellers, stainless steel pump shaft, etc. with all accessories coupled with energy efficient (ie3) tefc squirrel cage induction motor confirming to is:325 and is:12615, having 15% more bhp than that of pump, operating on 1500rpm, 415v, 3 ph, 50 hz [make: kirloskar /abb/cgl/bhel] all complete with required size of sluice valve and cidf non- return valve standard fitting, strainers, reducer, foot valve, pressure gauge, nuts & bolts, packings, fitting & fixing, labour & technician, etc. all complete job as per site requirement and direction of e/i. discharging -72 m3/hr and head - 40m (1w + 1s) 20 hp, cost towards making new foundation base for pump -motor set and panel including providing new ms base plate as per sample suitable for 20 hp pump- motor set, cutting and welding where necessary, nuts, bolts, flange etc with all labour, tools and materials all complete job., cost towards making suitable suction line by suppling of ms pipe, bend, flange, nut, bolt rubber insertion, including making hole for suction, cutting, welding etc all complete., cost towards making suitable delivery line by suppling of ms pipe, bend, flange, nut, bolt rubber insertion including joining the new suction line to the existing header by means of cutting, welding etc all complete., providing , erecting and commissioning lt motor control panel board fabricated with ms sheet and painted, dust-vermin proof. floor mounted cubical panel board shall be consisting of proper power distribution 100 a copper busbar- 4 pole, 1 no. 100 a mccb as incoming feeder and 2 nos. 63a mccb as outgoing feeders for motors, 1 no. 63 a mccb as spare feeder (for motor), 2 no. 32a mcb for lighting and other loads. including selector switches, switch disconnector isolator, voltmeters, ampere meters, mfm, indicator lamps, internal wiring, danger board, protection units & relay, capacitor banks/apfc and 02 nos suitable fasd starter, etc. all complete and as per is and direction of e/i .), supplying and erecting 16 sqmm 3 core xlpe / pvc insulated, 1100 v grade un-armoured copper cable with isi mark stranded / solid copper conductor complete erected on wall / panel or in provided trench in an approved manner. (from panel to motors), providing and erecting chemical earthing with all required materials etc all complete., cost of 3t triple type chain pully block suitable as below with 6m lift complete with laoad chain and hand chain suitable for avove lift, tested 50% over load as per is 3832 carry isi etc. all complete job as per the site requirement and indian standard., cost towards dismanteling of old pump set and foundation and making arrangements for removal of debries from the pump house., construction of chamber for 100mm sluices valve.

State Government

CTN :41234051

04 Aug, 2025 NA

Chaibasa - Jharkhand

Tender For quotation for rate of vt pump (raw water) and its accessories at saraswatipur rwss - supplying , installation and commissioning of single/multi stage vertical turbine pump sets (make: kirloskar /wpil/ mather & platt), rating-22kw/30hp approx as per is 1710, capable of discharging 94.56 m3/hr against a head of 50 m, consisting of bowl assemblies, bronze impellers, column assembly, stainless steel pump shaft, line shaft, etc. with all accessories coupled with squirrel cage induction motor confirming to is:325 and is:12615, having 20% more bhp than that of pump, operating on 1500rpm, 415v, 3 ph, 50 hz [make: kirloskar, jyoti, abb, cgl, bhel, jsl] all complete with required size of sluice valve and cidf non- return valve standard fitting, strainers, reducer, pressure gauge, etc. all complete job as per site requirement and direction of e/i. discharging -94.56 m3/hr and head - 50m (1w + 1s) 30 hp, cost towards making new foundation base for pump -motor set and panel including providing new ms base plate as per sample suitable for 30 hp pump- motor set, cutting and welding where necessary, nuts, bolts, flange etc with all labour, tools and materials all complete job for raw water vt pump set., cost towards jointing newly installed pump motor set to the existing header at raw water p/p., providing , erecting and commissioning lt motor control panel board fabricated with ms sheet and painted, dust-vermin proof. floor mounted cubical panel board shall be consisting of proper power distribution 160 a copper busbar- 4 pole, 1 no. 160 a mccb as incoming feeder and 2 nos. 100a mccb as outgoing feeders for motors, 1 no. 100 a mccb as spare feeder (for motor), 2 no. 32a mcb for lighting and other loads. including selector switches, switch disconnector isolator, voltmeters, ampere meters, mfm, indicator lamps, internal wiring, danger board, protection units & relay, capacitor banks/apfc and 02 nos suitable fasd starter, etc. all complete and as per is and direction of e/i ., supplying and erecting 16 sqmm 3 core xlpe / pvc insulated, 1100 v grade un-armoured copper cable with isi mark stranded / solid copper conductor complete erected on wall / panel or in provided trench in an approved manner. (from panel to motors)., providing and erecting chemical earthing with all required materials etc all complete., cost of 3t triple type chain pully block suitable as below with 6m lift complete with laoad chain and hand chain suitable for avove lift, tested 50% over load as per is 3832 carry isi etc. all complete job as per the site requirement and indian standard., cost towards dismantling of old pump set and foundation and making arrangements for removal of debries from the pump house.

State Government

CTN :41234052

04 Aug, 2025 NA

Chaibasa - Jharkhand

Tender For quotation for rate of items of vt pump (raw water) and accessories at gumuria rwss - supplying , installation and commissioning of single/multi stage vertical turbine pump sets (make: kirloskar /wpil/ mather & platt), rating-7.5 hp approx as per is 1710, capable of discharging 24.5 m3/hr against a head of 30 m, consisting of bowl assemblies, bronze impellers, column assembly, stainless steel pump shaft, line shaft, etc. with all accessories coupled with squirrel cage induction motor confirming to is:325 and is:12615, having 20% more bhp than that of pump, operating on 1500rpm, 415v, 3 ph, 50 hz [make: kirloskar, jyoti, abb, cgl, bhel, jsl] all complete with required size of sluice valve and cidf non- return valve standard fitting, strainers, foot valve, reducer, pressure gauge, etc. all complete job as per site requirement and direction of e/i. discharging -24.5 m3/hr and head - 30m (1w + 1s) 7.5 hp, cost towards making new foundation base for pump -motor set and panel including providing new ms base plate as per sample suitable for 7.5 hp pump- motor set, cutting and welding where necessary, nuts, bolts, flange etc with all labour, tools and materials all complete job., cost towards jointing newly installed pump motor set to the existing header., providing , erecting and commissioning lt motor control panel board fabricated with ms sheet and painted, dust-vermin proof. floor mounted cubical panel board shall be consisting of proper power distribution 100 a copper busbar- 4 pole, 1 no. 100 a mccb as incoming feeder and 2 nos. 63 a mccb as outgoing feeders for motors, 1 no. 63 a mccb as spare feeder (for motor), 2 no. 32a mcb for lighting and other loads. including selector switches, switch disconnector isolator, voltmeters, ampere meters, phase indicator lamps, internal wiring, danger board, protection units & relay, capacitor banks/apfc and 02 nos suitable fasd starter, etc. all complete and as per is and direction of e/i .), supplying and erecting 6 sqmm xlpe / pvc insulated, 1100 v grade un-armoured copper cable with isi mark stranded / solid copper conductor complete erected on wall / panel or in provided trench in an approved manner. (from panel to motors)., providing and erecting chemical earthing with all required materials etc all complete., cost of 3t triple type chain pully block suitable as below with 6m lift complete with laoad chain and hand chain suitable for avove lift, tested 50% over load as per is 3832 carry isi etc. all complete job as per the site requirement and indian standard., cost towards dismanteling of old pump set and foundation and making arrangements for removal of debries from the pump house.

State Government

CTN :41234055

04 Aug, 2025 NA

Chaibasa - Jharkhand

Tender For quotation for rate of items of c/f pump(clear water) and its accessories at gumuria rwss - supplying ,installation and commissioning of multi stage/ horizontal split casing/multi stage centrifugal pump (make: kirloskar / wpil/jyoti/ mather & platt) rating-40hp as per is:5120, capable for discharging 30 m3/hr against a head of 101 m , consisting of bronze impellers, stainless steel pump shaft, etc. with all accessories coupled with energy efficient (ie3) tefc squirrel cage induction motor confirming to is:325 and is:12615, having 15% more bhp than that of pump, operating on 1500rpm, 415v, 3 ph, 50 hz [make: kirloskar /abb/cgl/bhel] all complete with required size of sluice valve and cidf non- return valve standard fitting, strainers, reducer, foot valve, pressure gauge, ms delivery & suction pipe, common header, nuts & bolts, packings, fitting & fixing, labour & technician, etc. all complete job as per site requirement and direction of e/i. discharging -30 m3/hr and head - 101 m (1w + 1s) 40 hp, cost towards making new foundation base for pump -motor set and panel including providing new ms base plate as per sample suitable for 40 hp pump- motor set, cutting and welding where necessary, nuts, bolts, flange etc with all labour, tools and materials all complete job., cost towards making suitable suction line by suppling of ms pipe, bend, flange, nut, bolt rubber insertion, including making hole for suction, cutting, welding etc all complete., cost towards making suitable delivery line by suppling of ms pipe, bend, flange, nut, bolt rubber insertion including joining the new suction line to the existing header by means of cutting, welding etc all complete., providing , erecting and commissioning lt motor control panel board fabricated with ms sheet and painted, dust-vermin proof. floor mounted cubical panel board shall be consisting of proper power distribution 200 a copper busbar- 4 pole, 1 no. 160 a mccb as incoming feeder and 2 nos. 100 a mccb as outgoing feeders for motors, 1 no. 100 a mccb as spare feeder (for motor), 2 no. 32a mcb for lighting and other loads. including selector switches, switch disconnector isolator, voltmeters, ampere meters, mfm, indicator lamps, internal wiring, danger board, protection units & relay, capacitor banks/apfc and 02 nos suitable fasd starter, etc. all complete and as per is and direction of e/i ., supplying and erecting 25 sqmm xlpe / pvc insulated, 1100 v grade un-armoured copper cable with isi mark stranded / solid copper conductor complete erected on wall / panel or in provided trench in an approved manner. (from panel to motors)., providing and erecting chemical earthing with all required materials etc all complete., cost of 3t triple type chain pully block suitable as below with 6m lift complete with laoad chain and hand chain suitable for avove lift, tested 50% over load as per is 3832 carry isi etc. all complete job as per the site requirement and indian standard., cost towards dismanteling of old pump set and foundation and making arrangements for removal of debries from the pump house.

CTN :41231668

07 Aug, 2025 13.00 Lacs

Amritsar - Punjab

Tender For supply of television 55 inch , vr goggles , control processing unit with all accessories , ups , projector screen , projector , white board , usb type c to a , red paint , black paint , white paint , niwar tape , iron rod frame , welding rod , cutting blade

CTN :41230280

12 Aug, 2025 5.00 Lacs

Sagar - Madhya Pradesh

Tender For inviting rates for supplying of repairing and construction material/equipment the financial year 2025-26 - inviting rates for supplying of repairing and construction material/equipment the financial year 2025-26, boulder with spreading 0.75 to 20 c.m., fata with spreading rubble stone, stone- black / redstone masonary, steel bars 6,8,10,12,16mm dia hysd bars (as per isi specification), soft murrom with spreading, hard murrom with spreading, bajra with spreading, course sand as per specification, fine sandshahgad sand, crusher stone dust with spreading, 06 mm metalb.b. metal, 12 mm metalb.b. metal, 20 mm metalb.b. metal, 40 mm metalb.b. metal, 90 mm metalb.b. metal, crm( mix in plant ) for 45 mm max size, crm( mix in plant ) for 53 mm max size, red sand stone (flag stone)fine dressed with rough backing 70 mm thick, red sand stone (flag stone) fine dressed with rough backing 60 mm thick, red sand stone (flag stone)fine dressed with rough backing 50 mm thick, red sand stone (flag stone)fine dressed with rough backing 40 mm thick, red sand stone (flag stone) fine dressed with rough backing 300mm thick, flag stone 150 mm to 200 mm dasa, kota stone, green & black1 to 1 1/4, bricks (gitta)8 x 4 x 4 open bhatta, bricks (local)9 x 4 x 3 open bhatta, lime dust, limedingla, yellow soilpirotha, red soilgeyuri, half round r.c.c. pipe150mm dian.p.-2 with laying complete, half round r.c.c. pipe250 mm dian.p.-2 with laying complete, half round r.c.c. pipe300 mm dian.p.-2 with laying complete, half round r.c.c. pipe450 mm dian.p.-2 with laying complete, providing and placing in position r.c.c. hume pipe200 mm dian.p.-2, providing and placing in position r.c.c. hume pipe300 mm dian.p.-2, providing and placing in position r.c.c. hume pipe450 mm dian.p.-2, providing and placing in position r.c.c. hume pipe600 mm dian.p.-2, providing and placing in position r.c.c. hume pipe1000 mm dian.p.-2, providing and placing in position r.c.c. hume pipe n.p.3 300 mm dian.p.-3, providing and placing in position r.c.c. hume pipe n.p.3 450 mm dian.p.-3, providing and placing in position r.c.c. hume pipe n.p.3 600 mm dian.p.-3, providing and placing in position r.c.c. hume pipe n.p.3 1000 mm dian.p.-3, r.c.c. hume pipe n.p.3 1200 mm dian.p.-3 with laying complete, providing and placing in position r.c.c. hume pipe n.p.4 300 mm dian.p.-4, providing and placing in position r.c.c. hume pipe n.p.4 450 mm dian.p.-4, providing and placing in position r.c.c. hume pipe n.p.4 600 mm dian.p.-4, providing and placing in position r.c.c. hume pipe n.p.4 1000 mm dian.p.-4, r.c.c. hume pipe 1200 mm dian.p.-4 with laying complete, r.c.c. cement pole2.20 m-h2.20 m-h, r.c.c. cement pole2.40 m-h2.40 m-h, barbed wire steel9.38 k.g. per 100r. m., wire mesh (steel)50x50 mm strengthing 4mm with nut bolt baser, angle iron all size mild steel, winding wirewire, welding gaslabour complete with accessories, welding electriclabour complete with accessories, steel i sections all sizei.s.i. mark, steel door & windows with all fittingsangel iron 30x30x5 mm flat iron 25x5 mm sheet 18 gauge, collapsible shutter with all fitting (steel), iron chamber/drain grill (complete with labour and fixing), corrogated g.i. sheet0.63 mm, corrogated g.i. sheet0.80 mm, distemper asianinterior i.s.i., emulson asian companyinterior i.s.i., oil paints asian tractor all colouri.s.i. marka, brushes1 1 i.s.i, brushes22 i.s.i, brushes33 i.s.i, brushes44 i.s.i, brushes55 i.s.i, cement p.p.c. isi markisi mark each bag of 50 kg, cement o.p.c. isi markisi mark each bag of 50 kg, centring shutering with fitting and cartling below plinth level, centring/shutring with fitting & cartingabove plinth level, lime washing labour, distemper washinglabour, emulsion wasinglabour, oil paints paintinglabour, putty double coat with finishinglabour, steel bindinglabour, transportation of malma with loading & unloading0 to 1 km, transportation of malma with loading & unloading1 to 2.5 km, transportation of malma with

CTN :41233900

18 Aug, 2025 NA

Jehanabad - Bihar

Tender For supply of requisition for mechanical lab equipment - inverter based pulse tig dc welder, inverter based pulse mig, spot welding machine, sheet bending machine, shaping machine, surface grinding machine, power hacksaw machine, gas welding/cutting machine, tool cutter grinder, determination of friction loss in pipe., deflection of beam apparatus, shear force & bending movement apparatus, simply supported beam apparatus, canti lever beam apparatus, governors-all types, static & dynamic balancing apparatus, epicyclic gear train & holding torque apparatus, gear drive, power transmission, models of gears, clutch, break-clutch, drives, kaplan turbine test rig, separating and throttling calorimeter, different types of boilers-working model of cochran, babcock & wilcox boiler, heat exchanger-shell & tube heat exchanger, fin tube heat exchanger, vapor compression refrigeration trainer test rig, vapor absorption refrigeration testrig, refrigerant leak detector, air conditioning test rig, green sand moulding setup, casting setup and patterns, milling machine with required set of work holding devices, cutting tools, accessories and tool holders

Co-operative

CTN :41226820

31 Jul, 2025 NA

Shahjahanpur - Uttar Pradesh

Tender For supply of welding accessories in season 2025-26 - supply of welding accessories in season 2025-26, welding rubber hose pipe esab make size 08mm black (100 mtr), welding rubber hose pipe esab make size 08mm red (100 mtr), welding lead (cable) 70sqmm copper esab make (100m) suitable for 70 amp. load, welding lead (cable) 70sqmm aluminium esab make (100m)suitable for 70 amp. load, welding lead oxygen esab make all sizes, cutting nozzle esab make all sizes, cutter esab make, hand glove leather esab make, welding holder 600 amp esab make, welding holder 1000 amp esab make, welding black glass maclein germany, welding white glass maclein germany, welding screen, spark lighter, cutting nozzle for industrial lpg 1/16 & 5/64, regulator for industrial lpg, oxygen regulator esab make single stage, silicon brass gas welding rod 1/8", silicon brass gas welding rod 1/16", ador make welding machine model champ t400, 400amp.

CTN :41208835

16 Aug, 2025 6.83 Lacs

Guntur - Andhra Pradesh

Tender For purchase of office furniture and other allied items - mingle modular plt conference table 14 seating head - w:1800mm x d850mm x h:740mm , 2str : w:1350mm x d:600mm x h:740mm, 1str : w:675mm x d:600mm x h:740mm work surface:made of 25mm thick pre-laminated twin board of e1-p2 grade and approved shade conforming to is-12823:1990, edge banded with matching 2 mm thick pvc lipping. plastic abs access flap is provided for easy access to wires and cables. work top is available in various shapes as shown above understructure:it consist of 18mm thick pre-laminated twin board of e1-p2 grade and approved shade conforming to is-12823:1990, edge banded with matching 2 mm thick pvc lipping. aluminium alloy 63400 - wp profile is used for connecting panels together. the product has a knock-down construction modesty panel made of 18mm thick pre-laminated twin board of e1-p2 grade and approved shade conforming to is-12823:1990, edge banded with matching 2 mm thick pvc lipping. powder coated accent metal strip provided below work surface to enhance aesthetics. it is made of 0.8mm crca as per is 513,epoxy polyester powder coated (dft 40-60 microns). wire management - an array of panels made of 0.8mm crca ms is:513, epoxy polyester powder coated (dft 40-60 microns) is used for flow of wires and cables. provision to mount anchor roma 6 module plate is provided below worktop. cutout on top with two piece injection moulded plastic part polymer component is fitted to pull out audio,video cables onto worktop and connect devices charger to power socket below worktop. accessories are provided for adding functionality to the products. document shelf is made of 1.2mm crca ms is:513 and is epoxy polyester powder coated (dft 40-60 microns). it is to be used for storing papers and accessing them quickly. hdmi wire cover is made of 0.8mm crca ms is:513, epoxy polyester powder coated (dft 40-60 microns). hdmi holder is made of 2mm crca ms is:513, epoxy polyester powder coated (dft 40-60 microns). the hdmi wire cover along with hdmi holder (part of same packet) to be booked for every provision for hdmi connection as per customer/av team requirement (except in head and corner module). name plate is provided to display the name of person and consists of two plates - inner and outer plate. they are made of 1.2 mm aluminium sheet and 2mm aluminium sheet respectively. they are tack welded to each other using tungsten inert gas welding. the name plate is epoxy polyester powder coated (dft 40-60 microns). product certificates : test certificate, indoor advantage™ gold, griha and greenguard., mingle unitized plt_10 seater st w:3000mm x d:1150mm x h:740mm work top:made of 25mm thick pre-laminated twin board of e1-p2 grade and approved shade conforming to is-12823:1990, edge banded with matching 2 mm thick pvc lipping. access panels provided with soft closing hinges. understructure:the under-structure consists of mixture of 25mm and 18mm pre-laminated twin board of e1-p2 grade and approved shade conforming to is-12823:1990, edge banded with matching 2 mm thick pvc lipping. anodised aluminium alloy 63400 - wp profile is added at bottom edges for improving the aesthetics. the product has a knock-down construction. wire raiser:a wire raiser made of 0.8mm crca ms is:513. it is epoxy polyester powder coated (dft 40-60 microns) for flow of wires and cables. cutout provision below access flap at two locations for standard 8 module anchor roma is provided. beside each cutout, an additional cutout with plate is provided for mounting audio visual cables (eg.hdmi, vga-a,etc)., thrill mesh plus highback chair seat/back ass embly: the seat is made up of 1.5 ±0.1 cm. thick hot-pressed plywood and upholstered with fabric upholstery covers and moulded polyurethane foam. the seat has extra thick foam on front edge to give comfort to popliteal area. the back is injection moulded in glass filled polypropylene which is upholstered with mesh fabric. the back consist of adjustable lumbar suppo

Desoldering Pump Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

State Government

State Government

State Government

Co-operative