Latest desoldering station Tenders | Government desoldering station Tenders

Central Government/Public Sector

CTN :45732071

08 Jul, 2026 NA

Kapurthala - Punjab

Tender For supply of ring complete (welding joint of this item should be leakage proof), as per drawing: ls16151 alt 'a' [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45682512

04 Jul, 2026 NA

Mumbai - Maharashtra

Tender For corrigendum : supply, cutting and fitment of metallic frame for fixing outer side window glass, including necessary alteration, cutting and welding of coach body. item no. 1- (qty 12 nos) the frame shall be of overall size-965 mm x 610 mm x 45 mm, thickness 3.2 mm, with all segment corners having radius 80 mm to suit the glass fitment. the frame material shall be cold rolled steel conforming to is: 513- (pt-i)-2016, grade-cr2 as per col-i of icf drg.no- wtac-5-4-205, alt. ?e? or latest. work includes supply, cutting and fitment of smoke window glass of size 835mm x 530mm x 6 mm as per item no-1 of icf drg. no. wtac3-5-4-302, alt-m/3 or latest. installation with fixing rubber profile to icf drg. no. icf/vnr-5-4-202,alt-h/2 or latest complete in all respects.- ....... item no. 2- (qty-2 nos ) the frame shall be of overall size-659 mm x 610 mm x 45 mm, thickness 3.2 mm, with all segment corners having radius 80 mm to suit the glass fitment. the frame material shall be cold rolled steel conforming to is: 513- (pt-i)-2016, grade-cr2 as per col-iii of icf drg.no- wtac-5-4-205, alt. ?e? or latest. work includes supply, cutting and fitment of smoke window glass of size 579mm x 530mm x 6 mm as per item no-3 of icf drg. no. wtac3-5-4-302, alt-m/3 or latest. installation with fixing rubber profile to icf drg. no. icf/vnr-5-4-202, alt-h/2 or latest complete in all respects. [ warranty period: 30months after the date of delivery ] ]

Central Government/Public Sector

CTN :45737566

16 Jul, 2026 NA

Erode - Tamil Nadu

Tender For supply, installation & commissioning of igbt based 3 phase welding plant capacity: 600 amps as per technical specification enclosed. note: 1) firm should submit authorized dealership certificate along with offer, otherwise offer will not be considered. 2) firm should provide the point-wise remarks for all the 19 points given in the technical specification attached, other wise offer will not be considered. it must be complied on a point-wise basis and submitted separately. submission of only the firms catalogue, without point-wise compliance, will not be accepted. 3) the test certificate to be submitted along with supply. make: weldstar, kempii, migatronic, ador, ador fontech, esab, mogora cosmi ,techpro or similar [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :45736502

24 Jul, 2026 NA

Bikaner - Rajasthan

Tender For supply of solid mig/mag welding filler wire size 1.2 mm, class iii conforming to spec irs : m- 46/2020[quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :45707591

15 Jul, 2026 30.00 Lacs

Naliya - Gujarat

Tender For repairing replacement of internal wiring fitting and fixture and various type of led fitting and connected earthing items at domestic area at af stn naliya - materila and labour for point wiring with 1.5 sq mm frlsh single core pvc insulated unsheathed 1100 v grade with multistranded copper conductor drawn through pvc casing and capping with all accessories fixed to wall froofs ceiling etc and incl provision of 1.5 sq mm pvc insulated and unsheathed copper conductor as earth continuity conductor and connected to common earth dolly including pvc box isi marked of suitable size for mounting the switches, socket outlets, fan regulators etc., complete all as specified and directed for following:- one light/fan point controlled by one switch. one socket 3 pin outlet 5 amp on independent board. one light point controlled by two 2-way switches. one 3 pin socket outlet 5 amp on the same board with other switches. one bell/buzzer point controlled by one push button on the same board with other switches or independent with cable 1.5 sq mm size. all as per serial item number 2.00 here-in-before but with copper conductor cable of 2.5 sqmm size for one 3 pin socket outlet 15 amp independent board with cable 2.5 sq mm copper cable as earth continuity conductor. supply and fix in replacment of switch piano flush type single pole one way 5 amp, complete all as specified and directed. supply only socket outlet multipurpose 2/3 pin 5 amps flush button type complete all as specified and directed. supply only socket outlet multipurpose 213 pin 5 amps flush button type with universal box in polycarbonate complete all as specified and directed. supply only switch socket multipurpose 2 in 1,5 and 15 amps complete all as specified and directed. supply only ceiling fan regulator step type for 1200/1400 mm sweep ceiling fan including connections complete all as specified and directed. supply only switch bell push, flush type 5 amp. supply only electric bell ding-dong ac 230 volt sp with brass screws and cup washers all as specified and directed. pa supply only hylem sheet 3 mm thick size 9" x 11" including cutting of switch,socket complete all as specified supply only hylem sheet 3 mm thick size 8" x 5" including cutting of switch,socket complete all as specified supply only mcb single pole and neutral 32-63 amps, 240 volts, complete all as specified and directed. all as per item ser no 60 above but with two run of single core 6 sq mm and one run of 6 sq mm frlsh as earth wire s&f in replacement of 9 watt led bolard lights 4300/6500 k in rectangular shaped victorian design with opal acrylic diffuser and ip 65 protection,including pcc work for mounting the fittings with suitable size of nut, bolts and connection with two core copper cable all as specified and as directed. make bajaj, havells, crompton. m&l for repair / maint of wooden/steel boards for electrical db of any type and size including replacement of doors as per site requirement, hinges, handle and locking arrangement with necessary welding works, wooden works to make good the wooden / steel boards including painting with synthetic enamel paint of one coat all etc complete. the quoted shall be inclusive of replacement of wooden doors! steel doors/hinges! locking system/welding work required for repair/fixing of new doors etc complete pac s&f in replacement of 36w led recessed 2x2 luminaire 6500k fixed in the existing ceiling/roofs white powder coated crca housing with led seanless front frame with flat white transmission acrylic cover and necessary connection with twin core copper cable of suitable size in kutch auditorium with ceiling height of more than 20 feet including necessary arrangement for scaffolding ladder for replacement of ceiling lights all as specified and as directed. note: the quoted rates are inclusive of necessary safety arrangements iscaffolding/ladder etc complete all as specified and directed

Central Government / Public Sector

CTN :45737315

10 Jul, 2026 NA

Vijayawada - Andhra Pradesh

Tender For supply of solid mig/mag welding filler wire - 1.2mm dia., class 2013 iv to irs: m-46/13 with amendment no 1, grade er80s-g as per aws: a 5.28-10. shelf life: 9months from the date of receipt in stores or 12months from the date of manufacture whichever is more. [ warranty period: 12 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

CTN :45743941

07 Jul, 2026 NA

Patiala - Punjab

Tender For supply of fuel filling connection arrgt for detc/us as per drawing no. dmw-detc/us-9-0-014 alt. z. note: fuel filling connection arrgt for detc/us as per drawing no. dmw-detc/us-9-0-014 alt. z. note: (1) item no.-13 of drg. no. dmw-detc/us-9-0-014 alt. z. materialto be used is:2062-2011 gr e250a instead of is:2062-06 e-250 a. (2) mig welding to be used for manufacturing of subject item. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

CTN :45409872

07 Jul, 2026 NA

Patiala - Punjab

Tender For corrigendum : supply of fuel filling connection arrgt for detc/us as per drawing no. dmw-detc/us-9-0-014 alt. z. note: fuel filling connection arrgt for detc/us as per drawing no. dmw-detc/us-9-0-014 alt. z. note: (1) item no.-13 of drg. no. dmw-detc/us-9-0-014 alt. z. materialto be used is:2062-2011 gr e250a instead of is:2062-06 e-250 a. (2) mig welding to be used for manufacturing of subject item. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

CTN :45737632

30 Jul, 2026 NA

Kharagpur - West Bengal

Tender For supply of rod welding silver brazing alloy dia. 2.5 mm. material and specification : is: 2927 :1975,(rev. 1), with amend. no. 1 or latest, gr.: ba cu p5. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variationpermitted: max 8 lacs ] ]

CTN :45737627

30 Jul, 2026 NA

Bareli - Madhya Pradesh

Tender For supply of copper coated co2 welding filler solid wire size 1.2 mm, as per spec. no. irs: m-46/2020 class-1, spool size & condition of wire as per is: 6419-96 (reaffirmed 2021 ) with additional requirement of precision lair winding (plw) & copper content of coating to be between 0.2 to 0.5%, weld test as per aws (sfa-5.18) section-ii part-c, cast-305 mm min. & helix 25 mm max. in spool of dia-300 mm & weight: 12.5 kgs, shelf life of material not to be less than one year from the date of manufacturing. quality plan - n.a [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Desoldering Station Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government / Public Sector