Latest desoldering tools Tenders | Government desoldering tools Tenders

Central Government/Public Sector

CTN :40031515

05 Aug, 2025 NA

Ernakulam - Kerala

Tender For corrigendum : supply of sae flanges for thruster for csov - 2inch sae j 518 50 bar carbon steel flange groove face with ss retaining ring and cs welding hub to suite 40od tube for by 151 , 2inch sae j 518 50 bar carbon steel flange flat face with ss retaining ring and cs welding hub to suite 40od tube for by 151 , 2inch sae j 518 50 bar carbon steel blank flange groove face for by 151 , 2inch sae j 518 50 bar carbon steel flange groove face with ss retaining ring and cs welding hub to suite 40od tube for by 152 , 2inch sae j 518 50 bar carbon steel flange flat face with ss retaining ring and cs welding hub to suite 40od tube for by 152 , 2inch sae j 518 50 bar carbon steel blank flange groove face for by 152

CTN :41227572

06 Aug, 2025 NA

Udhampur - Jammu And Kashmir

Tender For supply of screw assembly thd , spacer ring , washer flat , chain assy long , nut plain round , screw machine , pin dowel 4 point 9 mm , washer beliviele , spring helical , washer believele , rod welding alluminium , chain welded , washer tightening , washer flat brass , paint rfu og , musline white , paint alluminium , french chalk , thinner , pin dowel 4 point 9 mm x 20 point 27 mm , silicon stick fine , silicon stick super fine , grinding bits no 3 and 4 , grinding wheel , wire brush , steel wood , grinding wheel 4 inch , cutting wheel 4 inch , spit pin all type , nut and bolt all type , washer various sme , rivit various sme , circlip of various sizes , chain , ring stop , screw , screw assy thread m8 oblique 01 point 25 mm , screw fixing thd m4 x 0 point 7 mm , screw positioning thd m6 x 1 point 0mm , screw fixing csk thd , screw fixing csk hd thd , screw fixing thd m4 x 0 point 7 mm , ring sealing to 10 dial , screw fixing control , clamp pipe , grease nipple , stud positioning , washer tighting 63 mm x 67 mm x 2mm , washer tighting 82 mm x 86 mm , thread tape , washer 24 point 65 mm x 12 point 5 mm x 2 point 28 mm , drill bit 6 mm to 19 mm , extractor bit , pin soldering rod 200 mm , cutting wheel 14 inch , packing performed , washer tighting , paint brush , pin straight headed , hand gloves , washer spring tension , hand brush brass , rivit copper csk hd , strap carrying testing assy , ring retaining ) /bid number : gem/2025/b/6501668 * /dated: 27-07-2025 & & / bid document 1 / 49

CTN :41227649

06 Aug, 2025 22.0 Thousand

Bathinda - Punjab

Tender For supply of rod welding 5mm,abrasive paper 120 size,adhesive synthetic resin,cork sheet,mafron 22 gas,sealing ring fuel filter,element fuel filter,hours meter assy,oil filter,insulation tape

CTN :41074999

28 Jul, 2025 3.54 Lacs

Leh - Jammu And Kashmir

Tender For bid to ras supply of relay 67ep-24-2c7-p16 7e res 28vdc coil 24 vdc 700 , transistor 2n 5884 , transistor j2n 3741 , transistor 215 , transistor 2t 818a , transitor 210a 0586 , relay tke52 ei 78 , clutch booster kit , brake booster kit , o ring kit box , bolt 8x1.25x35 , flange nut 8x1.25 , bolt 10x1.25x35 , flange nut 10x1.25 , bolt 12x1.25x35 , flange nut 12x1.25x.5 , split pin 4x22x016 , split pin 3.2x20x016 , clamp patti , clamp d bend type , clamp pin split type , split pin large , split pin small , split pin sgb 3 oblique 32x1 , split pin sgb 3 oblique 32x11 oblique 4 , flange nut 12x1.25 , foam seat 2 inch , black patti , chalk , tread black big , tread green big , welding rod s.s

CTN :41101104

02 Aug, 2025 50.0 Thousand

Jammu - Jammu And Kashmir

Tender For corrigendum : supply of acetylene gas , welding rod ci 2.5 mm , solder soft grade c , rust cleaner , fevicol sr 998 , writing for paint and putty , alcohol propyl technical , strap webbing , gasket , rubber coupling , piston ring

CTN :41203405

14 Aug, 2025 NA

Kamorta - Andaman And Nicobar Islands

Tender For supply of materials/items for mgnrega works nancowry block for fy-2025-26 - rate for accssible ares (kamorta & nancowry islands), cement (o.p.c) 43-grade, crusher dust good quality, pulverised sand good quality, coarse sand good quality, boulder 40-90mm, stone aggregate 40 mm, stone aggregate 20 mm, stone aggregate 12.5/13.2mm, cement concrete hollow block 40x15x20 cms, cement concrete hollow block 40x10x20 cms, m.s flat various size, m.s angle various size, tmt steel bars various size, binding wire good quality, nailsvarious size, nut & bolt various size, j hook various size, coach screw with cap washer 2 , self type screw various sizes as per requirement, ply wood anti-termite (commercial), approved/ reputed brand. 12 mm thick, ply wood water proof & factory painted (marine), approved/ reputed brand. 19 mm thick, pre painted galvanised (ppgi) roofing sheet 9 feet, ppgi plain sheet 2 feet width, cement primer (reputed brand.) good quality, wood primer (reputed brand.) good quality, oil bound distemper (reputed brand.) good quality, synthetic enamel paint (reputed brand) good quality, painting brush (amar) various sizes, sliding bolt make classic 300x16mm, window handles (anodized) various sizes as per requirement, iron hinges various sizes as per requirement, tower bolt (anodized) various sizes as per requirement, w/c pan complete set make hindustan or any other reputed company indian type (460x440) mm, pvc pipe make hindustan 100 mm, pvc pipe 3 inch, thinner make sheenlac good quality, steel hand saw for wood good quality, saw file (triangular) 4 inch, augur 3/8 inch, wooden shuttering with propping good quality wood, g.i. wire mesh of dia. 4mm, pvc coated to achieve outer dia. not less than 5mm in required colour, shade and height. (reputed brand) mesh size 100x100mm, pre cast rcc post for fencing top width-12cm, bottom width-15cm, height-1.70m, main bars-4 nos.10mm dia, stirrups-8mm dia @100mmc/c spacing, rcc mix-1:1.5:3, pre-cast rcc hume pipe. inner dia-1.00m, length-1.00m, thickness-10cm, main bars-12mm dia, stirrups-10mm dia @100mmc/c spacing, rcc mix-1:1.5:3, pre-cast rcc hume pipe inner dia-0.50m, length-1.00m, thickness-10cm, main bars-12mm dia, stirrups-10mm dia @100mmc/c spacing, rcc mix-1:1.5:3, pre-cast rcc ring for c/o ring well inner dia-2.0m., height-30cm, thickness-8cm, vertical main bars- 8mm dia@10cm c/c spacing , and 3 nos. 8mm dia distribution bars of rcc mix-1:1.5:3, plump bob good quality, sledge hammer good quality, ball peen hammer good quality, try square good quality, trowel good quality, mixing pan good quality, pvc cowl 100mm, pvc door frame make rajshree 50x47mm wide 5mm thick, pvc door 30x50mm wide 5mm thick and 75mm wide pvc sheets for top rail, preparation & installation of citizen information board fully metallic board of (4x3) feet on 4 feet stand. black coloured board with information written in white and have to fix with concrete footing at work site, preparation & installation of citizen information board fully metallic board of (2x3) feet on 4 feet stand. black coloured board with information written in white and have to fix with concrete footing at work site, preparation & installation of citizen information board fully wooden board of (4x3) feet on 4 feet stand. black coloured board with information written in white and have to fix proper footing support., mooram good quality, epoxy paint standard, red oxide paint standard, welding charges arc welding, mixer machine (on hire) 10/7 cubic feet or 1 bag capacity, hiring of road roller8 tonne, precast rcc circular slab of 1.44 sqm,thickness-5 cm, main bars-8 mm dia, distribution bars-8mm dia @100mm c/c spacing, rcc mix-1:1.5:3, rate for inaccssible areas (katchal, teressa & chowra islands), cement (o.p.c) 43-grade, crusher dust good quality, pulverised sand good quality, coarse sand good quality, boulder 40-90mm, stone aggregate 40 mm, stone aggregate 20 mm, stone aggregate 12.5/13.2mm, cement concrete hollow b

State Government

CTN :41189579

12 Aug, 2025 8.09 Lacs

West Tripura - Tripura

Tender For maintenance of mi scheme under belbari rd block during the year 2025-26/sh_ - repair _ maintenance of pump-motor, suction-delivery _ electrical accessories etc. (job no. tr/34/minor works/wrd-i/2025-26) - dismentling of pump for over hauling including greasing, gland packing, necessary repairs & reinstallation of the same including trial run for 10 hrs. in two spell complete as per direction of the engineer-in-charge.i) for li, supply & fitting fixing ball bearing of approved quality for pump required during overhauling.i) 6306 ball bearing (tata /skf), providing & fitting fixing shaft sleeve bush of approved quality.i) for li (cast iron), providing & fitting fixing shaft sleeve nut of approved quality.i) cast iron (ci), providing & fitting fixing c.i. gland of approved quality.i) for li, providing & fitting fixing c.i coupling complete with nuts & bolts of approved quality.i) 150 mm dia, providing & fitting fixing coupling nuts & bolts (all size)of approved quality.i) for li, providing & fitting fixing coupling rubber bush (all size)of approved quality. i) for li, providing & fitting fixing coupling star bush (all size) of approved quality.i) 150 mm dia, providing & fitting fixing pump shaft of approved quality., supplying and fitting fixing of asbestos rope of best quality as per direciton of engineer-in-charge. i) 6mm to 8mm thick, ii) 10 to 12 mm thick, providing & fitting fixing casing ring of approved quality.i) 150 mm dia (10 mm thick), supplying and fitting fixing of pump cooling pipe of best quality as per direciton of engineer-in-charge., providing & fitting fixing lantern ring for pump of approved quality., supplying and greasing/applying of grease of approved quality as per direction of engineer-in-charge., providing and fixing g.i. bend /elbow in the pipe line including testing of joints complete as per cpwd specification and direction of the engineer - in - charge. a) 150 mm dia, providing & fitting fixing shaft sleeve nut of approved quality. (cast iron), providing & fitting fixing of g.i. flange ( 10 mm wall thickness ) by welding with g.i. / ms pipe and placing position as per specification and the direction of the engineer-in- charge.i) 150 mm dia, providing & fitting fixing gland nut / stag nut 100 mm long for gland of approved quality.i) for li, providing and fitting fixing m.s. clamp for hose pipes with nuts & bolts complete as per relevant is specification anddirection of engineer-in-charge.i) 150mm dia, providing & fitting fixing rubber flange washer 6 mm thick at site of work of approved quality.i)150 mm dia, providing and fitting fixing ms foot valve as per relevant is specification and the direction of the engineer-in-charge.. i) 150 mm dia, providing & fitting fixing c.i tail piece of approved quality at site of work.i) 150 mm dia, providing & fitting fixing foot valve leather washer (6 mm thick) of heavy duty at site of work of approved quality.i) 150 mm dia, providing & fitting fixing c.i foot valve spare parts of 125/150 mm dia at site of work of approved quality.a) c.i foot valve weight, b) c.i foot valve ring, c) c.i foot valve net, dismantling of motor fpr vernishing heating etc cpmplete in/c reinstalltion and trail run for two spell complete as per direction of the engineer-in charge., supplying & fitting fixing of spare parts for 20/25 hp horizontal motor.a) motor fan, b) terminal plate, providing and fitting fixing of fully automatic star delta type motor starter ( 3 ph. 50 hz, 415v, 25hp /18.50 kw relay range within 17-25 ) in steel sheet enclosures with contractors and timer etc. complete suitable for motor pump havells/l & t/bch make direction of the engineer-in-charge.i) 25hp/18.5kw relay range within 13-21 +10%, providing and fitting fixing steel sheet enclosed switch fuse unit (suitable for din fuses). triple pole with neutral link ( tpn ) , 415/500 volt complete as per direction of the engi

Central Government/Public Sector

CTN :41200187

14 Aug, 2025 NA

Koraput - Odisha

Tender For supply of 42-500-hand-drill-machine , 42-501-abrasive-cutting- machine , 42-502-hydraulic-crimping-tools , 42-503-digital- vernier , 42-505-box-spanner , 42-506-l-n-key-set , 42-507- l-n-key-set , 42-508-screw-driver , 42-509-start-screw- driver , 42-511-spring-nose-plier , 42-512-cutting-plier , 42- 513-pipe-spanner , 42-514-wire-cutter-stripper , 42-515- hammer , 42-516-measurment-tap , 42-517-ball-pin- hammer , 42-519-neon-tester , 42-521-round-file , 42-522- flat-file , 42-523-1-by-2-round-file , 42-524-adjustable- spanner , 42-525-spanner-d-type , 42-526-spanner-ring- type , 42-527-sprit-level , 42-532-welding-screen

Central Government/Public Sector

CTN :40469292

07 Aug, 2025 NA

Koraput - Odisha

Tender For corrigendum : tender for supply of 39 types of special tools - drift , mandrel , clamp , fixture , plate , fixture , fixture , clamp , fixture , set of mandrel , feeler , jar , fixture , fixture , technological pin , fixture , fixture , fixture , thrust ring for welding of screen , fixture , fixture , fixture , fixture , fixture , fixture , fixture , fixture , fix , ture , fixture , feeler gauge , device , fixture for measurement of ak max , fixture , fixture , fixture , adaptor , ring , support , die

CTN :41177717

30 Jul, 2025 NA

Mumbai - Maharashtra

Tender For supply of ladder and equipment for the workshop section bhandup complex - aluminium ladder 12 mtr, portable welding machine, hydraulic crimping tool, portable grinder, portable drill machine, portable air blower, spanner 55 ring, spanner 55 fix, multimeter

Desoldering Tools Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

Central Government/Public Sector

Central Government/Public Sector