Tender For supply of anchor bolt hook type 8mm , anchor bolt 6mm , anchor bolt 8mm , pvc coated wire , drill bit 6mm , drill bit 8mm , drill bit 12mm , drill bit 14mm , drill bit 16mm , flush tank , trolley wheels 75 mm dia heavy duty , ss cupboard handle 8 inch , ss drawer slider 16 inch long , drawer wheel 1.5 inch dia heavy duty , 1 inch black screw , 1.5 inch black screw , 1.25 inch black screw , 2 inch black screw , 0.50 inch counter sunk ss screw , 0.75 inch counter sunk ss screw , 1 inch self screw , 1.5 inch self screw , 1.25 inch self screw , 2 inch self screw , 0.50 inch self screw , 0.75 inch self screw , fisher 10mm , fisher 8mm , fisher 6mm , brass screw 2 inch , brass screw 2.5 inch , ss tower bolt 300mm long , glass cutter , m seal 250 g , ss curtain hook cup hook , ss bracket 20 mm dia for hanger rod , joint filler , rubber gloves , scrubber for tank cleaning , mop for tank cleaning , 16mm x 10cm nut and bolt with washer , 12mm x 10cm nut and bolt with washer , 10mm x 10cm nut and bolt with washer , 8mm x 10cm nut and bolt with washer , 6mm x 10cm nut and bolt with washer , calcium silicate false ceiling tile 600x600mm , gypsum false ceiling tile 600x600mm , false ceiling grid main tee , false ceiling grid 4ft tee , false ceiling grid 2ft tee , false ceiling grid 1 inch wall angle , false ceiling grid 0.75 inch supporting angle stay , g.i perimeter section for gypsum ceiling , g.i inter section for gypsum ceiling , g.i section for gypsum ceiling , gypsum screw gyproc for gypsum ceiling , 8mm anchor bolt gyproc for gypsum board , mr gypsum board 8x4 , gypsum joint putty , gypsum joint tape 2 inch , aluminium rivet 3.5mm , rivet gun , star bit , 3.5 mm metal bit , 6mm metal bit , 4mm metal bit , 6mm hilti bit , wheather strip for aluminium door , aluminium door pivot , 12 inch aluminium tower bolt , 8 inch aluminium tower bolt , aluminium door bolt 300 mm , o rubber , aluminium door lock godrej , cylinder lock , acp sheet 3.5mm viva , j corner pvc section , 7 by 8 corner pvc , small wheather strip for cupboard door , autocloser bit , ss autocloser hinge ebco , 0.75 inch gypsaw screw , 1 inch gypsaw screw , 1.5 inch gypsaw screw , 2 inch gypsaw screw , 2 inch wood screw , 3 inch wood screw , 18 inch aluminium cutting wheel , ss door handle 6 inch , gp pipe , ms angle , ms flat , dog chain for cylinders , cup brush for grainding , 6 inch rainwater gutter aqua star , rain water gutter clamp 6 inch , rain water gutter end cap 6 inch , rain water gutter drop 6 inch , rain water gutter connection 6 inch , 25x25mm plastic dummy , 40x40mm plastic dummy , 50x50mm plastic dummy , 60x40mm plastic dummy , 100x100mm plastic dummy , welding glass , welding holder , welding machine male connector , welding machine female connector , welding cable , concrete nail 2 inch , 100x100x4mm ms plate with hole , 150x150x4mm ms plate with hole , self screw bit for sheet , ms nut and bolt 1.5 inch long 8mm thick , gate hinge ms 1.5 inch , gate hinge ms 2 inch , ms aldrop 6 inch , 0.35mm trafford roofing sheet 10ft long , plain roofing sheet 0.35mm thick 2ft width , 0.35mm ridge sheet 8ft , 18 guage g.i plain sheet 8x4ft , banian waste , 3.5mm steel wire rope , 4mm steel wire rope , weld mesh 1 inch x 1inch , fevicol , wpc panal 32 mm thick 0.75x2.00m , wpc panal 32 mm thick 0.85x2.00m , skin door 75 x200 32 mm thick , skin door 90 x200 32 mm thick , magnetic catcher
Tender For supply of sterile suture vicryl 3 by 0 half circle cutting needle , suture vicryl 3 by 0 half circle needle , surgeon cap dispossable , disposable plunger filler pack complete , ceramic modified peek material in pellete in 2 different shade of 150 gm , ceramic bonding agent for cobalt chrome pack of 7 by 8 gm , plastic wedges , alloplastic bone graft 0 point 5 to 1 cc bioactive , alpha graft bovine bone pkt of 0 point 5 to 1 cc , matrix band ivory pattern , barbed broaches set of 10 to 12 , cement polycarboxylate kit with pwdr and liq , syringe hypodermic cartridge type needles size 25 mm , syringe hypodermic cartridge type needles size 35 mm , denture cleaner tablet , hand piece lubricant spray , disposable shoe cover , clove oil bott of 50 ml , sand paper roll , spray anaesthetic surface , np alloy ni cr for pfm , dental lab abrasive carborundum separating disc size 35 1 point 7 and 1 point 8 mm , dental lab abrasive carborundum separating disc size 25 07 mm , dental lab abrasive carborundum separating disc size 38mm 1 point 7 mm and 1 point 8 mm , tc bur cylindrical for dental lab , tc bur conical for dental lab , tc bur straight for dental lab , straight fissure bur for straight hand piece , round bur for straight hand piece , die pin , syringe disposable 5ml , syringes disposable 10 ml , syringes disposable 2 ml , pkt wax instrument set of 06 , opaque liq bott vita , vita pfm dentine a1 , vita pfm dentine a2 , vita pfm dentine a3 , vita pfm dentine a 3 point 5 , modelling liquid vita , diespacer for metal work bott , wash opaque powder bott vita , opaque paste shade a2 vita , debubliser for metal work bott , flexi denture finishing polishing kit , biostar sheet 1 mm soft pkt , wire 21 gauze , wire 19 gauze , heat cure luciton , all ceramic crown and bridge finishing polishing kit , flexi denture cartridge , build pfm brush build no 0 renfirt , arch bar for oral surgery , imf screws , dental floss pkt thread , water floss dental , dologel dental tube , ultrasoft tooth brush sensodyne , etchant tube , impression trays plastic upper and lower set of 4 , periopack , endodontic retreatment files //bid details 2 / 41
Tender For supply of various materials for construction of new works in chandapur neeralakatti gp limit under mahatma gandhi national rural employment guarantee scheme - mr9904-bib cock 20mm nominal bore, mr9473-granite stone slabs fine dressed 40 mm thick, mr9452-cleat angles gpbada, mr9451-chrominum plated screws gpbada, mr9445-casurina poles 75 - 100 mm dia gpbada, mr9444-casurina poles 100 - 150 mm gpbada, mr9433-broken stone aggregate 40 mm size gpbada, broken stone aggregate 12 mm to 10 mm size gpbada, bond stone 20 x 20 x 45 cm gpbada, aluminium window frame section 1.20 mm thick gpbada, alluminium tower bolt - 20 cm gpbada, alluminium handles - 15 mm gpbada, handling loading and unloading 3% on material gpbada, water storage tank gpbada, m.s rods gpbada, pvc beading gpbada, chlorinated polyvinyl-25 mm outer dia gpbada, binding wire gpbada, plasticizer / super plasticizer gpbada, display board_cib gpbada, electrification gpbada, coarse sand (zone iii) gpbada, water proofing cement paint gpbada, portland cement gpbada, mr9684-water tanker gpbada, mr9683-vibratory roller 8 tonne gpbada, mr9502-water gpbada, mr9475-gravel 2.36 mm/murrum gpbada, mr9471-granite metal 40 mm gpbada, mr9470-granite metal 20 mm gpbada, mr9458-crushed stone course aggregate 53 gpbada, mr9457-crushed stone chippings 13.2 mm gpbada, mr9434-burnt bricks class 35 (non modular) gpbada, mr9426-boulders gpbada, mr9738-add brush, putty, sand paper at 2% on cost of paint gpbada, mr9991-granite sink 23cm thick gpbada, mr9953-vitrified tiles 600x600 mm gpbada, mr9817-ms flat gpbada, mr9773-add watering charges at 1 % on material gpbada, mr9759-add providing and removing scaffolding at 3% on labour gpbada, mr9755-add hom of welding and grinding machine 4per on material gpbada, add hom of welding and grinding machine 2per on material gpbada, mr9498-mathi/nandi wood planks for panels 25 mm thick gpbada, mr9491-liquid wood filler gpbada, mr9487-jungle wood runners and planks gpbada, mr9463-enamel metal paint gpbada, mr9459-cudddapah slab 2.5 cms thick gpbada, broken stone aggregate 20 mm size gpbada, thick plain glass gpbada, miscellaneous harges gpbada, mr9753-add handling , loading and unloading at 2% on material gpbada, mr9752-add handling , loading and unloading at 1% on material gpbada, mr9749-add cutting and other wastage 5% gpbada, mr9727-add 15% wastage for glass gpbada, mr9725-mason class i (with tools) gpbada, mr9690-painter class i gpbada, mr9688-unit cost as per the specification gpbada, mr9678-mixer (concrete) - 1 cum capacity gpbada, mr9677-mixer (concrete small used in culvert) gpbada, mr9675-hom of vibrator 0.71 days gpbada, mr9640-brick gpbada, mr9607-welder grade i gpbada, mr9606-stone dresser (with tools) gpbada, mr9598-fitter class i gpbada, mr9597-fabricator gpbada, mr9554-tmt bars fe 500 gpbada, mr9535-size stone 20 x 20 x 25 cms gpbada, mr9534-silver oak or equivalent planks 38 mm thick gpbada, mr9528-rubble stones gpbada, mr9527-rubber beading for shutters beading gpbada, mr9510-pigment gpbada, mr9508-nylon rollers gpbada, labour charges 7% on materialgpbada, mr9499-mathi/nandi wood scantling gpbada
Tender For rrsmp/25-26 bagaha-1/03 - khabtola gulten miyake ghar se shekh karmulah ke ghar tak, clearing and grubbing road land (by manual means) including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300mm, removals of stumps of such trees cut earlier & disposal of unserviceable materials & stacking of serviceable materials to be used or auctioned upto a lead of 1000 m including removal and disposal of top organic soil not exeeding 150mm in thickness as per technical specification clause 201.1 and direction of e/i, dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including t&p and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 m as per technical specification clause 202., dismantling of existing structures, like culverts, bridge,retaining wall and other structures comprising of brick masonary including unserviceable material and stacking the serviceable material with all lift and lead of 1000m as per, construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table 300.2 with lead upto 1000 m as per technical specification clause 303.1., excavation for roadway in soil using manual means for carrying of cut earth to embankment site with a lift upto 1.5 m and lead upto 50 m as per technical specification clause 302.3, construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at omc, and compacting with smooth wheel roller to achieve the desired density, complete as per technical specification clause 401., providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kn in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 3 as per technical specification clause 405., providing and applying primer coat with bitumen emulsion (ss-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70- 1.0 kg/sqm using mechanical means as per technical specification clause 502., providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surface tretaed with primer and clened with hydriloc broom as per technical specification aclouse 503., providing and laying semi dense bituminous concrete with 100-120 tph batch type hmp producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 to 5 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per morth specification clause no. 508 complete in all respects., construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at omc, and compacting with smooth wheel roller to achieve the desired density, complete as per technical specification clause 401., providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth
Tender For rrsmp/25-26 araria/08 - laluwabari pmgsy near bridge to purnea sima via karhmana, clearing and grubbing :- clearing and grubbing road land (by manual means) including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300mm, removals of stumps of such trees cut earlier & disposal of unserviceable materials & stacking of serviceable materials to be used or auctioned upto a lead of 1000 m including removal and disposal of top organic soil not exeeding 150mm in thickness as per technical specification clause 201.1 and direction of e/i, scarifying :- scarifying the existing bituminous road surface to a depth of 150 mm and disposal of scarified material with a lift upto 3 m and lead upto 1000 m as per technical specification clause 301.4., construction of subgrade and earthen shoulders :- construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table 300.2 with lead upto 1000 m as per technical specification clause 303.1., granular sub-base with well graded material(grade ii) :- construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at omc, and compacting with smooth wheel roller to achieve the desired density, complete as per technical specification clause 401., water bound macadam gr iii :- providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kn in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 3 as per technical specification clause 405., pavement quality concrete (pqc) :- construction of un-reinforced, dowel jointed, plain cement concrete pavement over a prepared sub base with 43 grade cement @ 400 kg per cum, coarse and fine aggregate conforming to is 383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a batching and mixing plant as per approved mix design, transported to site, laid with a fixed form or slip form paver, spread, compacted and finished in a continuous operation including provision of contraction, expansion, construction and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, dowel bar, tie rod, admixtures as approved, curing compound, finishing to lines and grades as per drawing, reinforced cement concrete m15 grade kilometre local stone of standard design asper irc:8 fixing in position including painting and printing , etc as per drawing and technical specification clause 1703., km stone, 200 m stone, retro-reflectorised traffic signsproviding and erecting direction and place identification retro-\reflectorised sign as per irc:67 made of encapsulated lens type reflective sheeting vide clause 1701.2.3, fixed over aluminium sheeting, 2 mm thick with area exceeding 0.9 sqm supported on mild steel angle iron posts 75 mm x 75 mm x 6 mm, 2 nos. firmly fixed to the ground by means of properly designed foundation with m-15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per approved drawing and technical specification clause 1701., providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per irc:67 made of encapsulated lens type reflective sheeting vide clause 1701.2.3 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with m15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per drawings and technical specification clause 801, 600 mm eq
Tender For rrsmp/25-26 araria/07 - pmgsy road jamuwa mandal chowk to mandal tola, clearing and grubbing :- clearing and grubbing road land (by manual means) including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300mm, removals of stumps of such trees cut earlier & disposal of unserviceable materials & stacking of serviceable materials to be used or auctioned upto a lead of 1000 m including removal and disposal of top organic soil not exeeding 150mm in thickness as per technical specification clause 201.1 and direction of e/i, scarifying :- scarifying the existing bituminous road surface to a depth of 150 mm and disposal of scarified material with a lift upto 3 m and lead upto 1000 m as per technical specification clause 301.4., construction of subgrade and earthen shoulders :- construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table 300.2 with lead upto 1000 m as per technical specification clause 303.1., granular sub-base with well graded material(grade ii) :- construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at omc, and compacting with smooth wheel roller to achieve the desired density, complete as per technical specification clause 401., water bound macadam gr iii :- providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kn in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 3 as per technical specification clause 405., wet mix macadam (wmm) :- providing laying spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at omc in mechanical mixer (pug mill) carraige of mixed material by tipper to site,laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kn weight to achieve the desired density including lighting, barricading and maintainance of diversion, etc as per tables 400.11 & 400.12 and technical specification clause 406., prime coat :- providing and applying primer coat with bitumen emulsion (ss-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70- 1.0 kg/sqm using mechanical means as per technical specification clause 502., tack coat :- providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surface tretaed with primer and clened with hydriloc broom as per technical specification aclouse 503., semi dense bituminous concrete :- providing and laying semi dense bituminous concrete with 100-120 tph batch type hmp producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 to 5 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per morth specification clause no. 508 complete in all respects., pavement quality concrete (pqc) :- construction of un-reinforced, dowel jointed, plain cement concrete pavement over a prepared sub base with 43 grade cement @ 400 kg per cum, coarse and fine aggregate conforming to is 383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a batching and mixing plant as per approved mix design
Tender For rrsmp/25-26 araria/10 - pmgsy bhika more to barbanna mmgsy via bhika west, clearing and grubbing :- clearing and grubbing road land (by manual means) including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300mm, removals of stumps of such trees cut earlier & disposal of unserviceable materials & stacking of serviceable materials to be used or auctioned upto a lead of 1000 m including removal and disposal of top organic soil not exeeding 150mm in thickness as per technical specification clause 201.1 and direction of e/i, construction of subgrade and earthen shoulders :- construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table 300.2 with lead upto 1000 m as per technical specification clause 303.1., granular sub-base with well graded material(grade ii) :- construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at omc, and compacting with smooth wheel roller to achieve the desired density, complete as per technical specification clause 401., water bound macadam gr iii :- providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kn in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 3 as per technical specification clause 405., prime coat :- providing and applying primer coat with bitumen emulsion (ss-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70- 1.0 kg/sqm using mechanical means as per technical specification clause 502., tack coat :- providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surface tretaed with primer and clened with hydriloc broom as per technical specification aclouse 503., semi dense bituminous concrete :- providing and laying semi dense bituminous concrete with 100-120 tph batch type hmp producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 to 5 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per morth specification clause no. 508 complete in all respects., pavement quality concrete (pqc) :- construction of un-reinforced, dowel jointed, plain cement concrete pavement over a prepared sub base with 43 grade cement @ 400 kg per cum, coarse and fine aggregate conforming to is 383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a batching and mixing plant as per approved mix design, transported to site, laid with a fixed form or slip form paver, spread, compacted and finished in a continuous operation including provision of contraction, expansion, construction and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, dowel bar, tie rod, admixtures as approved, curing compound, finishing to lines and grades as per drawing, reinforced cement concrete m15 grade kilometre local stone of standard design asper irc:8 fixing in position including painting and printing , etc as per drawing and technical specification clause 1703., km stone, 200 m stone, retro-reflectorised traffic signsproviding and erecting direction and place identification retro-\reflectorised sign as per irc:67 made of
Tender For rrsmp/25-26 araria/11 - ghora chowk sindhiya to sidhiya south yadav tola, clearing and grubbing :- clearing and grubbing road land (by manual means) including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300mm, removals of stumps of such trees cut earlier & disposal of unserviceable materials & stacking of serviceable materials to be used or auctioned upto a lead of 1000 m including removal and disposal of top organic soil not exeeding 150mm in thickness as per technical specification clause 201.1 and direction of e/i, construction of embankment with material obtained from borrow pits with a lift upto 1.5 m , transporting to the site spreading , grading to required slope and compacting to meet requirement of tables 300.1 and 300.2 with a lead upto 1000 m & 100 m as per technical specification clause 301.5 ., for 1000 m lead, construction of subgrade and earthen shoulders :- construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table 300.2 with lead upto 1000 m as per technical specification clause 303.1., granular sub-base with well graded material(grade i) :- construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at omc, and compacting with smooth wheel roller to achieve the desired density, complete as per technical specification clause 401., granular sub-base with well graded material(grade ii) :- construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at omc, and compacting with smooth wheel roller to achieve the desired density, complete as per technical specification clause 401., water bound macadam gr iii :- providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kn in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 3 as per technical specification clause 405., wet mix macadam (wmm) :- providing laying spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at omc in mechanical mixer (pug mill) carraige of mixed material by tipper to site,laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kn weight to achieve the desired density including lighting, barricading and maintainance of diversion, etc as per tables 400.11 & 400.12 and technical specification clause 406., prime coat :- providing and applying primer coat with bitumen emulsion (ss-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70- 1.0 kg/sqm using mechanical means as per technical specification clause 502., tack coat :- providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surface tretaed with primer and clened with hydriloc broom as per technical specification aclouse 503., semi dense bituminous concrete :- providing and laying semi dense bituminous concrete with 100-120 tph batch type hmp producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 to 5 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth