Latest dhs plate Tenders | Government dhs plate Tenders

CTN :45720695

20 Jul, 2026 NA

Tikamgarh - Madhya Pradesh

Tender For supply of implant and implant consumable during the year 2026-27 - tens nail ss set, tibia nail ss set, femur nail ss set, proximal tibia plate ss set, distal femur plate ss set, ss wire, k- wire ss, external fixature ss, pfn ss, a.o. clamp, c.c. screw 4.0mm (15mm - 85mm), c.c. screw 6.5mm 16mm threaded (25mm - 110mm) (titanium), c.c. screw 6.5mm 32mm threaded (25mm - 110mm) (titanium), c.c. screw 6.5mm full threaded (25mm - 110mm) (titanium), cable synthesis, calcancal plate (steel), calcaneal plate (titanium), cancellous locking fully threaded screw 6.5mm, cancellous locking partially threaded screw 6.5mm, cancellous screw 6.5mm full threaded (steel), centre slotted bolt, clavicle nail, d.h.s. plate long barrel (all size), d.h.s. plate short barrel (all angle & size), dcp locking plate narrow, dcp small locking plate (all size), denham pin (all size), dhs screw 60 to 110 mm, distal femoral nail (sizes : width 9-12mm & length 5-35cm), distal radius locking plate ellies type, distal tibia locking plate (5 to 8 hole) anatomic contoured, distal tibia locking plate screw (2.7mm), distal tibia nail sizes (width 8 mm to 10mm) length : 28-38cm., elastic nail / stainless steel nail (size 3 to 4mm) / 10.5, ellis buttress plate (3 to 8 hole) for radium (all size), ender nail (size : width 3, 3.5 & 4mm), female post (1 hole, 3 hole, 5 hole), femur interlocking nail sizes (width : 8mm to 12mm length : 36 cm to 44cm), flexible drill bit (all size), guarded drill bit, half pins, half rings (s.s.) (all size), herbert screw 4mm thickness (titanium), hexagonal socket, hollow connecting rod (8"-20") 10mm, hook plate for olecranon, humerus interlock bolt 3.4 bolt, humerus interlocking nail (all size), 1/3 tubular plate (4 to 8 hole), ilizarov and other external fixator implant, illiosacral screw (all size), inter lock bolt 4.9 mm (length 18 mm to 60mm), interlocking bolt 3.9mm (length 18 to 52mm), italian arch (s.s.), jess fixator / distractor set, k wire bayonet tip, k-nail for femur (sizes : width 7-9mm, length 26-38cm), k-wire (1.8/2.0/2.5mm width) (6" to 9"), k-wire trochar tip, locking cortical screw 3.0mm, locking cortical screw 4.0mm, locking cortical screw 5.0mm, male post (1 hole, 3 hole, 5 hole), malleolar screw 4.5mm (15mm to 95mm), mini plates (non locking) for metacarpal fixation 2-8 hole mini plates, thickness 2.5mm, 6mm to 16mm length, multiplanar clamp, narrow dcp for tibia and hemerus (4.5mm), nuts, olive wires, ordinary bolt, pelvis - contoured plate, spring plate, symphysis plate, proximal (upperend) tibia hokey plate (left and right) 6 to 12 hole, proximal bolt p.f.n. 6.5 mm (60-100mm), proximal bolt p.f.n. 7.5mm (70-110mm), proximal femoral locking compression plaet, proximal femoral nail - long (sizes : width 9-12mm & length 36-42cm), proximal femoral nail - short (sizes : width 9-12mm & length 25mm), proximal humerus locking plate (4-6 hole) philos type, proximal tibia i buttress plate (4-10 hole), proximal tibia locking plate (rt. and lt.) (5 to 12 hole), proximal tibia nail sizes (width 8mm to 10mm) length : 28-38 cm., proximal tibia t buttress plate (4-10 hole), rail road external fix. (8", 10", 12", 16") / lrs, rancho cube (1 hole, 2 hole, 3 hole), reconstruction plate 3.5mm (all size), reconstruction plate 4.5mm (all size), rod to rod clamp, sacroillac screw (all size), schanz pin (2.5,3,3.5,4,4.5mm), schanz pin fixation bolt, screw for mini plates thickness 2.5mm, 6mm to 16mm length, side slotted bolt, simple cancellous screw 4.0mm (15mm-85mm), simple cancellous screw 6.5mm 16mm threads (steel), simple cancellous screw 6.5mm 32mm threads (steel), simple cortical screw 3.5mm, simple cortical screw 4.5mm, small dcp (3.5mm), scanz, square radius nail (width 2,2.5,3 & 3.5mm), square ulna nail (width 2,2.5, 3 & 3.5mm), ss wire (16 to 24 g), steinmann pin (all size), straight plate (2 hole, 3 hole, 4 hole), straight plate with threaded rod - 6 hole, t and l locking buttress (4 to 8 hole), taper

CTN :45702284

10 Jul, 2026 40.00 Lacs

Sagwara - Rajasthan

Tender For supply of implant supply pmo sagwara - small locking plate 3.8mm, small lcp 5 hole, small lcp 6 hole, small lcp 7 hole, small lcp 8 hole, small lcp 9 hole, small lcp 10 hole, small dcp 5 hole, small dcp 6 hole, small dcp 7 hole, small dcp 8 hole, small dcp 9 hole, small dcp 10 hole, t plate locking 3.8 mm 3 hole , t plate locking 3.8 mm 4 hole , t plate locking 3.8 mm 5 hole , t plate locking 3.8 mm 6 hole , oblique t plate locking lt/ rt 3 hole , oblique t plate locking lt/ rt 4 hole , oblique t plate locking lt/ rt 5 hole , oblique t plate locking lt/ rt 6 hole , philos locking plate 3 hole, philos locking plate 4 hole, philos locking plate 5 hole, philos locking plate 6 hole, philos locking plate 7 hole, philos locking plate 8 hole, distal radius vollar plate l/r, distal tibia plate l/r, recon lcp all 6,7,8,9,10 hole, recon dcp 6,7,8,9,10 hole, 1/3 tubular lcp 6,7,8,9,10 hole, clavical plate l/r, olecranon lcp l/r, 3.8mm can locking screw, locking screw 3.8mm 12mm, 14 mm ,22 to 28 , locking screw 3.8mm 16 mm,18mm, 20mm, locking screw 3.8mm 30 mm , locking screw 3.8mm 32 mm to 40 mm , locking screw 3.8mm 42 mm to 50 mm , cortical screw 3.5mm (12 to 20 mm) , cortical screw 3.5mm (22 to 26 mm) , cortical screw 3.5mm (28 to 30 mm) , cortical screw 3.5mm (32 to 42 mm) , screw box 3.8 locking, drill bit 6" x 2.7mm, drill bit 6" x 2.8mm, bone tap 3.5mm, screw driver 3.5mm x 150mm, drill sleeve for lcp 3.8mm, narrow, broad & d.h.s. locking plate all size, narrow dcp 6 hole, narrow dcp 7 hole, narrow dcp 8 hole, narrow dcp 10 hole, narrow lcp 6 hole, narrow lcp 7 hole, narrow lcp 8 hole, narrow lcp 10 hole, broad dcp 8 hole, broad dcp 9 hole, broad dcp 10 hole, broad lcp 8 hole, broad lcp 9 hole, broad lcp 10 hole, d.h.s. plate 135* dc hole 4 hole, d.h.s. plate 135* dc hole 5 hole, d.h.s. plate 135* dc hole 6 hole, d.h.s. plate 135* dc hole 8 hole, locking d.h.s. plate 135* 4 hole, locking d.h.s. plate 135* 5 hole, locking d.h.s. plate 135* 6 hole, locking d.h.s. plate 135* 8 hole, d.h.s. lag screw (any size), locking screw 4.9mm (20 to 30mm) , locking screw 4.9mm (above 30mm to 50m), locking screw 4.9mm (above 52mm to 60m), cortical screw 4.5mm (20 to 38mm) , cortical screw 4.5mm (40 mm to 50mm), screw box 4.9 locking, drill bit 8" x 3.2mm, drill bit 8" x 4.3mm, bone tap 4.5mm, screw drilver 4.5mm x 150mm, drill sleeve for lcp 4.9mm, austin moore prosthesis xl ( sterile ) 37 mm , austin moore prosthesis xl ( sterile ) 39 mm , austin moore prosthesis xl ( sterile ) 41 mm , austin moore prosthesis xl ( sterile ) 43 mm , austin moore prosthesis xl ( sterile ) 45 mm , austin moore prosthesis xl ( sterile ) 47 mm , austin moore prosthesis xl ( sterile )49 mm , austin moore prosthesis xl ( sterile ) 51 mm , austin moore prosthesis xl ( sterile ) 53 mm , bipolar xl ( fenestrated ) (sterile ) 37 mm, bipolar xl ( fenestrated ) (sterile ) 39 mm, bipolar xl ( fenestrated ) (sterile ) 41 mm, bipolar xl ( fenestrated ) (sterile ) 43 mm, bipolar xl ( fenestrated ) (sterile ) 45 mm, bipolar xl ( fenestrated ) (sterile ) 47 mm, bipolar xl ( fenestrated ) (sterile ) 49 mm, bipolar xl ( fenestrated ) (sterile ) 51 mm, bipolar xl ( fenestrated ) (sterile ) 53 mm, bipolar xl ( fenestrated ) (sterile ) 55 mm, instrument set content :- , austin moore raps, raps for biopolar hip prosthesis, hollow chisel, impactor, nylon faced, extractor with two hooks, spare hook for extractor, murphy's bone skid, judet extractor, measuring gauge for prosthesis, instrument box , distal femoral & lateral tibia locking plate all size, lateral tibia lcp left & right 5 hole , lateral tibia lcp left & right 7 hole , lateral tibia lcp left & right 9 hole , lateral tibia lcp left & right 11 hole, lateral tibia lcp left & right 13 hole, distal femoral lcp left & right 5 hole, distal femoral lcp left & right 7 hole, distal femoral lcp left & right 9 hole, distal femoral lcp left & right 11 hole, distal femoral lcp left & right 13 h

Central Government/Public Sector

CTN :45681589

26 Jun, 2026 NA

Chennai - Tamil Nadu

Tender For supply of coach set of frames for seats and back rests of lws bw2 coach consist of the following 1) four seater frame to drg. lg61229,alt- nil- to quantity-20 nos, 2) single seater frame-rh to drg. lg61233,alt- nil- to quantity-10 nos, 3) single seater frame-lh to drg. lg61231,alt nil- to quantity-10 nos, 4) four seater backrest frame to assembly of frame and cushion support to drg. lg61234, alt-nil,item 1,2,5 and 6 to quantity-20 nos, 5) single seater back rest frame to assembly of frame and cushion support to drg.lg61237, alt -nil ,item 1, 2,5 and 6 to quantity-20 nos, 6) single seater(mounting) frame assembly- (double) to drg.lg61201, alt- d to quantity-8 nos 7) single seater (mounting) frame assembly- lh to drg.lg61202,alt -c to quantity- 2 nos, 8) single seater (mounting) frame assembly- rh to drg.lg61203, alt-d to quantity- 2 nos and 9) sleeve for single seater frame to drg.lg61219, alt-a to quantity-12 nos please visit icf vendor portal for downloading drawing https://vp.icf.gov.in/vendtendordetnew.php using key:0726c1i82tn1155 [ warrantyperiod: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

CTN :45646932

07 Jul, 2026 2.33 Lacs

Thiruvananthapuram - Kerala

Tender For one panchayath one playground-establishment of sports infrastructure facilities at kalavayal ground in puthenkurish grama panchayath in kunnathunadu lac, ernakulam- supply and installation of open gym equipment - retender - open gym equipments, od48095/2026-2027 rower - supply and installation of rower having the following specifications: dimensions: (l x w x h) = 1472 x 915 x 1040 mm. upper and bottom pipes 88mm od b class gi pipe. foundation plate m.s. round plate of 250 mm & 8 mm thick. handle - 33 mm od b class g.i pipe. angle between handle and horizontal surface is 75 - 80 degree. linkages 48 mm od b class g.i. pipe. seat & back rest 380 x 275 x 60mm thick high-density polyethylene (hdpe) blow molded with m10 integrated wall thickness 3 to 4 mm. foot resting pipe - 60 mm od b class g.i. pipe. end closing cap dome shape made by pp / nylon / hdpe material. closing caps pp / nylon / hdpe material. foundation stool: made from main pipe 88 mm od m.s pipe and top support of m.s. round plate of 250 mm & 8mm thickness is welded at top. square tube of 30 x 30 x 2 mm must be used to support center pipe.height of stool is 3 ft. foundation stool is embedded in c.c. stock below ground level. pin 25 mm m.s. bright bar pin. circlips a 24 circlips are used for assembly. bearing bushes - 60 mm od seamless pipe / bar. bearing- use is 6005 permanent lubricated reputed brands. grips high quality rubber 46 mm od. coating - best quality of powder coating 80 -120 micron. safety instructions and exercise chart - start & finish position stick on product. all joints must be welded as per is standards and zinc primer paint should be applied at all the welding points prior to finishing. (foundation shall be min m20 cc and design shall be approved by the engineer-in -charge before installation.), od48569/2026-2027 cross trainer (double) - supply and installation of double cross trainer having the following specifications: dimensions: (l x w x h) 2280 x 550 x 1650 mm. main frame- made of 88 mm od ?b? class gi pipe dually bending design. foundation plate ? m.s. round plate of 250 mm & 8 mm thick. paddle vertical support - 42 mm od ?b? class gi pipe. handle - 33 mm od ?b? class gi pipe dually bending design. leg movement frame ? 50 mm x 50 mm x 2 mm thick square pipe. footrest - cast iron 124 x 296 x 5 mm thick and m.s. plate of 2 mm thick use for to support it. top closing cap ? dome shape made by pp / nylon / hdpe material. closing cap?s? pp / nylon / hdpe material. foundation stool: made from main pipe 88 mm od b class g.i. pipe. and top support of m.s. round plate of 250 mm & 8 mm thickness is welded top. square tube of 30 x 30 x 2 mm must be used to support center pipe. height of stool is 3 ft. foundation stool is embedded in c.c. stock below ground level. grips - high quality rubber. bearing- use is 6005 permanent lubricated reputed brand. bearing bushes - 60mm od seamless pipe. pin made of 25mm m.s. bright bar. circlips a 24 circlips are used for assembly. coating - best quality of powder coating 80-100 micron. safety instructions and exercise chart - start & finish position stick on product. all joints must be welded as per is standards and zinc primer paint should be applied at all the welding points prior to finishing. (foundation shall be min m20 cc and design shall be approved by the engineer-in -charge before installation.), od48098/2026-2027 air walker - supply and installation of air walker having the following specifications: dimensions: (l x w x h) 1190 x 380 x 1244 mm. main frame- ø 88 mm od "b" class gi pipe dually bending design.foundation plate- m.s. round plate of ø 250 mm & 8 mm thick. paddle ø 42 mm od round gi pipe. handle - ø 33 mm od "b" class gi pipe. footrest - cast iron 124 x 296 x 5 mm thick and m.s. plate of 2 mm thick use to support it. top closing cap dome shape made by pp / nylon / hdpe material. closing cap's - pp / nylon / hdpe material. bracket - 8 mm thick laser profile is used to s

CTN :45646934

07 Jul, 2026 2.25 Lacs

Thiruvananthapuram - Kerala

Tender For one panchayath one playground -development of jai hind stadium in njarackal grama panchayath in vypin lac, ernakulam district-supply and installation of open gym equipment - outdoor gym equipments, od268048/2025-2026 chest press (double) - supply and installation of double chest press having the following specifications: dimensions: (l x w x h) 1955 x 710 x 1900 mm. main center pipe - ø 114 mm od “b” class gi pipe. foundation plate –m.s. round plate of ø 250mm & 8 mm thick. foundations cover capdome shape of pp / nylon / hdpe material. remaining frame -made up of ø 48 mm od “b” class g.i. pipe. handle - made up of ø48mm od “b” class g.i. pipe. link - made up of ø 48 mm od “b” class g.i. pipe. seat & back rest – 380 x 275 x 60 mm thick high-density polyethylene (hdpe) blow molded with m10 in-sert wall thickness 3 to 4 mm. bearing bush closing cap’s– pp / nylon / hdpe material. handle must be connected with frame by 8 mm laser cutting ms profile. top closing cap – dome shape made by pp / nylon / hdpe material. foundation stool: made from main pipe ø 88 mm od m.s pipe and top support of m.s. round plate of ø 250 mm & 8 mm thickness is welded top. square tube of 30 x 30 x 2 mm must be used to support center pipe.height of stool is 3 ft. foundation stool is embedded in c.c. stock below ground level. bearing - use is 6005 permanent lubricated reputed brands. pin – made up of ø 25 mm m.s. bright bar pin. bearing bushes - ø 60 mm od seamless pipe. grips - high quality rubber ø 46 mm od. circlips–a 24 circlips are used for assembly. coating - best quality of powder coating 80-120 micron. safety instructions and exercise chart - start & finish position stick on product. all joints must be welded as per is standards and zinc primer paint should be applied at all the welding points prior to finishing. (foundation shall be m20 cc and design shall be approved by the engineer-in -charge before installation.), od268050/2025-2026 air walker - supply and installation of air walker having the following specifications: dimensions: (l x w x h) 1190 x 380 x 1244 mm. main frame- ø 88 mm od ?b? class gi pipe dually bending design. foundation plate?m.s. round plate of ø 250 mm & 8 mm thick. paddle? ø 42 mm od round gi pipe. handle ? ø 33 mm od ?b? class gi pipe. footrest - cast iron 124 x 296 x 5 mm thick and m.s. plate of 2 mm thick use to support it. top closing cap ? dome shape made by pp / nylon / hdpe material. closing cap?s -pp / nylon / hdpe material. bracket - 8 mm thick laser profile is use to support paddle frame. foundation stool: made from main pipe ø 88 mm od m.s pipe and top support of m.s. round plate of ø 250 mm & 8 mm thickness is welded top. square tube of 30 x 30 x 2 mm must be used to support center pipe.height of stool is 3 ft. foundation stool is embedded in c.c. stock below ground level. bearing- use is 6005 permanent lubricated reputed brands. pin?s ? ø 25mm m.s. bright bar pin. circlips? a 24 circlips are used for assembly. bearing bushes -ø 60 mm od seamless pipe. coating - best quality of powder coating 80-120 micron. safety instructions and exercise chart - start & finish position stick on product. all joints must be welded as per is standards and zinc primer paint should be applied at all the welding points prior to finishing. (foundation shall be m20 cc and design shall be approved by the engineer-in -charge before installation.), od268054/2025-2026 rower - supply and installation of rower having the following specifications: dimensions: (l x w x h) = 1472 x 915 x 1040 mm. upper and bottom pipes - 88 mm od b class gi pipe. foundation plate m.s. round plate of 250 mm & 8 mm thick. handle - 33 mm od b class g.i pipe. angle between handle and horizontal surface is 75 - 80 degree. linkages 48 mm od b class g.i. pipe.seat & back rest 380 x 275 x 60mm thick high-density polyethylene (hdpe) blow molded with m10 in-sert wall thickness 3 to 4 mm. foot resting pipe - 60 mm od b class g.i. pipe. e

CTN :45641093

13 Jul, 2026 50.00 Lacs

Bhiwani - Haryana

Tender For e-tender for ortho implants - cemented thr-cement restrictor ,stem centralizer cemented thr-acetabular cup (highly cross linked,all size) cemented thr-bone cement 40gm cemented thr-femoral head (all size & offsets-28mm,32mm,36mm) uncemented thr-femoral component all offsets ,metallurgy:hyroxyapatite coating uncemented thr-acetabular component ( various hole combinations ,different shape & size,hemispherical oblong,peripheral fit ) uncemented thr-screw for acetabular fixation uncemented thr-uncemented cup uncemented thr-acetubular liner(highly cross linked) uncemented thr-femoral head (all size & offsets-28mm,32mm,36mm) tkr-bone cement 40gm tkr-femoral component tkr-tibial component (all type, posterior stablized ,pcl sparing ,constrain & semi-constrain) tkr-highly cross linked polyethylene insert revison tkr-femoral component with extension rod revison tkr-tibial component (all types as discribed earliar revison tkr-tibial extension rod revison tkr-articulated antibiotic cement spacer(femur & tibia) revison tkr-roatating hinged knee system revison tkr-bone cement 40gm acl & pcl reconstruction-endobutton(fixed loop & variable loop) acl & pcl reconstruction-interferential screw (meta & biodegradble) acl & pcl reconstruction-washer acl & pcl reconstruction-nitinol guide wire acl & pcl reconstruction-bone staple modular bipolar femur prosthesis (cemented & uncemented) bone cement 40gm with & with antibiotic shoulder rotator cuff - suture anchor (single loaded for single & double row) shoulder rotator cuff - arthroscopic cannula shoulder rotator cuff - suture anchors with suture passor(all angles,chia wire) & set meniscus repair - burr meniscus repair - shaver meniscus repair - all inside & meniscus suture ultrabraid /fiber wire suture (all size) antibiotic bone cement 40gm (all sizes) bone cement 40gm (all sizes) pulse lavage (all sizes) semi tubular, one third tubular plate (all sizes)ss& titanium 3.5mm dcp , lcdcp,lcp,recon with& without locking (all sizes)ss/titanium 4.5mm lcp narrow ,4.5mm lcp broad (all sizes) ss/titanium dhs plate locking /withlocking & standard,short barrel dcs plate (all sizes) tsp for dhs plate richard screw (all sizes) proximal femur locking plate (all size left& right if any) distal femur plate lcp (left & right all sizes) osteotomy plate 120* all sizes femur interlocking nail with locking bolt (all sizes) pfn small & long (all sizes with screws) pfan (all sizes with screws) distal femur nail (all sizes with screws) k-wire 1.0mm ,1.5mm,2.0mm,2.5mm,3.0mm (titanium) steinman pin ,denham pin ss wire 16g,18g,20g 3.5mm cortical screw (all sizes) 3.5mm locking screw (all sizes) 4.5mm cortical screw (all sizes) 4.5mm locking screw (all sizes) 6.5mm canulated screw (all size) (titanium) 6.5mm leg screw partialy,fully threaded (all sizes with washers) herbert (headless) screw (all size) (titanium) 4.0mm canulated screw (all size with washer partially threaded 16mm/32mm) small t plate ,l plate , varing angle distal radius plate all size with screw left & right if any tens nail (all size) rush nail , endrs nail (all size) k nail (all size) square nail for rdius & ulna malleolar screw 4.5mm (all size) clavicle plate 3.5mm (all sizes with screw) clavicle hook plate ,lateral end clavicle lcp (all size with scre) philos (all sizes with screws) humerus nail (all sizes with locking bolt) hockey plate (all sizes both sided with screws) proximal tibia raft plate (all sizes both sided with screws) recon plate for palvis both sided all sizes with screws proximal tibia t plate locking & non-locking (all sizes both sided with screws) proximal tibia l plate locking & non-locking (all sizes both sided with screws) distal tibia metaphyseal plate (all sizes with screws both sided) distal tibia anterolateral plate (all sizes with screws both sided) distal humerus lateral column locking plate both sided (all sizes with screws

CTN :45533008

20 Jun, 2026 4.60 Lacs

Thiruvananthapuram - Kerala

Tender For one panchayath one playground - development of vankulathuvayal stadium in azhikode grama panchayath in azhikode lac, kannur -supply and installation of outdoor gym equipment - retender - open gym equipment, od405580/2025-2026 horse rider - supply and installation of horse rider having the following specifications: dimensions: (l x w x h) 1140 x 400 x 1400 mm. main frame - 114 mm od b class gi pipe. foundation plate m.s. round plate of 250 mm & 8 mm thick. foundation cover cap - dome shape of pp / nylon / hdpe material. remaining frame is made by 48 mm od b class gi pipe. seat frame is made by 48 mm od b class gi pipe. seat position must be horizontal to 110 -120 degree. link- made up of 48 mm od b class g.i. pipe. angle between link and ground position is 10-20 degree. handle - 33 mm od b class gi pipe. paddle vertical support - 60 mm od b class gi pipe. handle frame- 42 mm od b class gi pipe dually bending design. foot pipe - 33 mm od b class gi pipe. support frame 10 mm thick ms flat is used. seat- dimension 320 x 270 x 100 mm blow moulded wall thickness 4mm material hdpe. bearing bush closing cap pp / nylon / hdpe material. foundation stool: made from main pipe 88 mm od m.s pipe and top support of m.s. round plate of 250 mm & 8 mm thickness is welded at top. square tube of 30 x 30 x 2 mm must be used to support center pipe. height of stool is 3 ft. foundation stool is embedded in c.c. stock below ground level. bearing - use is 6005 permanent lubricated reputed brand. bearing bushes - 60mm od seamless pipe. pin made of 25 mm m.s. bright bar. grips - high quality rubber 46 mm od. circlips a 24 circlips are used for assembly. coating - best quality of powder coating 60 to 70 micron. safety instructions and exercise chart - start &finish position stick on product. all joints must be welded as per is standards and zinc primer paint should be applied at all the welding points prior to finishing. (foundation shall be m20 cc and design shall be approved by the engineer-in -charge before installation.), od405586/2025-2026 leg press (double) - specifications: dimensions: (l x w x h) = 1676 x 400 x1500 mm. main frame - 114 mm od ?b? class gi pipe. foundation plate m.s. round plate of 250 mm &8 mm thick. foundations cover cap - dome shape of pp / nylon / hdpe material. link - is 60 mm od b? class gi pipe. seat frame - 42 mm od b class gi pipe. leg press back rest should be angled in 120 -130 degree. footrest - cast iron 124 x 296 x 5 mm thick and m.s plate of 2 mm thick use to support it. seat & back rest ? 380 x 275 x 60 mm thick high-density polyethylene (hdpe) blow molded with m10 integrated wall thickness 3 to 4 mm. link connected with frame by 8 mm thick laser cutting ms profile. top closing cap ? dome shape made by pp / nylon / hdpe material. closing cap?s- pp / nylon / hdpe material. foundation stool: made from main pipe 88 mm od m.s pipe and top support of m.s. round plate of 250 mm & 8 mm thickness is welded at top. square tube of 30 x 30 x 2 mm must be used to support center pipe. height of stool is 3 ft. foundation stool is embedded in c.c. stock below ground level. bearing- use is 6005 permanent lubricated reputed brand. pin 25 mm m.s. bright bar pin. bearing bushes - 60 mm od seamless pipe. circlip? a 24 circlips are used for assembly. coating - best quality of powder coating 80 -120 micron. safety instructions and exercise chart - start & finish position stick on product. all joints must be welded as per is standards and zinc primer paint should be applied at all the welding points prior to finishing. (foundation shall be m20 cc and design shall be approved by the engineer-in -charge before installation.), od405583/2025-2026 back extension - supply and installation of back extension having the following specifications: dimensions: (l x w x h) 1060 x 730 x 990 mm. main frame - made from 88 mm od b class g.i. pipe. foundation plate m.s. round plate of 250 mm & 8 mm thick. leg support - 42 mm

CTN :45533036

20 Jun, 2026 7.99 Lacs

Thiruvananthapuram - Kerala

Tender For one panchayath one playground- development of ezhikkara grama panchayath ground in paravur lac, ernakulam district- supply and installation of open gym equipment - retender - inauguration stone and interlock laying for open gym area, od34726/2026-2027 providing and fixing 18 mm thick gang saw cut, mirror polished, pre-moulded and pre polished, machine cut for inauguration granite stone of required size, approved shade, colour and texture laid over 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) joint treated with white cement, mixed with matching pigment, epoxy touchups including rubbing, curing etc. complete at all levels. area of slab over 0.50 sqm, 16.21 engraving letters in hard stone, od419846/2025-2026 providing and laying of interlock concrete block pavements having thickness 60mm (m35) as per drawings and technical specification clause 1504 confirming to is 15658 and laid in required colour and pattern over and including 50mm thick compacted bed of 6 mm metal including edge concreting for 300mm width and 150mm depth with cc m35( @ 0.045 m3/m), supply and installation of open gym equipment, od27550/2026-2027 chest press (double) - supply and installation of double chest press having the following specifications: dimensions: (l x w x h) 1955 x 710 x 1900 mm. main center pipe - ø 114 mm od ?b? class gi pipe. foundation plate ?m.s. round plate of ø 250mm & 8 mm thick. foundations cover cap- dome shape of pp / nylon / hdpe material. remaining frame - made up of ø 48 mm od ?b? class g.i. pipe. handle - made up of ø48mm od ?b? class g.i. pipe. link - made up of ø 48 mm od ?b? class g.i. pipe. seat & back rest ? 380 x 275 x 60 mm thick high-density polyethylene (hdpe) blow molded with m10 integrated wall thickness 3 to 4 mm. bearing bush closing cap?s? pp / nylon / hdpe material. handle must be connected with frame by 8 mm laser cutting ms profile. top closing cap ? dome shape made by pp / nylon / hdpe material. foundation stool: made from main pipe ø 88 mm od m.s pipe and top support of m.s. round plate of ø 250 mm & 8 mm thickness is welded top. square tube of 30 x 30 x 2 mm must be used to support center pipe. height of stool is 3 ft. foundation stool is embedded in c.c. stock below ground level. bearing - use is 6005 permanent lubricated reputed brands. pin ? made up of ø 25 mm m.s. bright bar pin. bearing bushes - ø 60 mm od seamless pipe. grips - high quality rubber ø 46 mm od. circlips?a 24 circlips are used for assembly. coating - best quality of powder coating 80-120 micron. safety instructions and exercise chart - start & finish position stick on product. all joints must be welded as per is standards and zinc primer paint should be applied at all the welding points prior to finishing. (foundation shall be m20 cc and design shall be approved by the engineer-in -charge before installation.), od30940/2026-2027 surfboard - dimensions: (l x w x h) 1090 x 890 x 1390 mm. main frame made from two pipes of ø 114 mm od b class gi pipe. foundation plate m.s. round plate of ø 250 mm & 8 mm thick. connecting pipe - ø 88 mm od b class gi pipe is used to connect both main frame pipes at top end and ø 42 mm pipe is used to connect at bottom end. handle - ø 42 mm and ø 33 mm od b class gi pipe. support pipe ø 60 mm must be used to support leg movement frame. leg movement frame ø 42mm od b class gi pipe. footrest - cast iron 325 x 270 x 8 mm thick and m.s. plate of 250 x 200 x 2 mm thick use for to support it. bracket - 8mm thick laser profile is used to support leg movement frame. top closing cap dome shape made by pp / nylon / hdpe material. closing caps pp / nylon / hdpe material. foundation stool: made from main pipe ø 88 mm od m.s pipe and top support of m.s. round plate of ø 250 mm & 8 mm thickness is welded at top. square tube of 30 x 30 x 2 mm must be used to support center pipe. height of stool is 3 ft. foundation stool is embedded in c.c. stock below ground level. grips - high quality

State Government

CTN :45533112

23 Jun, 2026 1.44 Lacs

Bahadurgarh - Haryana

Tender For job no.1214/2026 (hew) work of providing and fixing and installation open gym equipments and supply and installation chair type garden bench near h. no.860 in sector-13 at u/e bahadurgarh and all other works contingent thereto. - 26.58.1 supply and installation of garden bench1 chair type garden bench with l-shaped sides made of reinforced concrete (m30), thickness 100 mm, overall height 1000 mm, base width 620mm. back and seat shall consist of 5 nos. reinforced concrete planks 1500 mm x 100 mm x 50 mm one plank 1500 mm x 200 mm x 50 mm. seating height of the bench shall be 450 mm. the bench shall be fixed with nuts on concrete mount, all holes sealed after assembly and installation. all materials required to be as per bis specifications., app. item double cross trainer main pipe 114 mm od & 3.75 mm thickness m/s round pipe handles made of 38mm x31 mm m/s round pipe with best quality rubber handle for hand grip working with rubber seal bearing system and foot rest main pipe for 60 x 40 mm m/s flat pipe size of foot rest 5.5"x12" with base plastic cover all alloy cover with ss cover all m/s pipe best quality powder coating., app. item double leg press main round pipe 114 mm od & 3.75 mm thickness m/s round pipe seat made of m/s sheet 16gauge size of seat is 12"x12" fixed on 48 od round pipe smoothly working with rubber bearing system all alloy covered with s.s cover plastic base cover and best quality powder coating., app. item shoulder bilder main pipe 114 mm od & 3. 75mm thickness 17" round wheel made of 31 mm round pipe 25 mm round pipe with bearing system and s.s nut cover with plastic handle and u bend join with main 114 mm pipe for steering wheel is 48 mm od round pipe all alloy cover withs s cover best quality plastic handle on wheels &base fixed with nut bolt 8 mm m/s plate with plastic cover with best quality powder coating, app. item double chest press made of 114 mm od & 3.75mm thickness 38 mm round pipe 48 mm round pipe soxs0 mm sq pipe complete operating with bearing system with rubber seal bearing all alloy are covered the s.s covers & best quality rubber handles for grip and smoothly working. plastic base cover and best quality powder coating

State Government

CTN :45300981

17 Jun, 2026 5.67 Crore

Wardha - Maharashtra

Tender For corrigendum : supplying of furniture to newly formed cgrf office, for jr. law officer and mini training centre under o&m circle wardha tq. dist. wardha.-providing, supplying and placing of godrej make beat fabric high back 1.00chair with head rest. seat/back assembly: the seat & back is made up of1.2 ± 0.1cm thk. hot pressed plywood measured. upholstered with knittedfabric , over moulded high resilience polyurethane foam high back size:51.8 cm. (w) x 75.2 cm. (h) seat size : 49.0 cm. (w) x 48.8 cm. (d) highresilience (hr) polyurethane foam: the hr polyurethane foam ismoulded with density = 55+/-2 kg/m³ and hardness 16 ± 2 kgf as per is:7888for 25% compression. armrests: the adjustable armrest is designed with thefollowing features: • up-down adjustment– 8 steps (8.0±0.5 cm range) • heightadjustable armrest structure which is powder coated & fitted with an armresttop. • fixed armrest top is pu moulded over metal insert. front pivotsynchro mechanism: the adjustable tilting mechanism is designed with thefollowing features360° revolving type. • single point control. • front-pivot fortilt with feet resting on ground ensuring more comfort. • tilt tensionadjustment. • 4-position locking with anti-shock feature. • seat/back tiltingratio of 1:2 . back height adjustability: back can be adjusted in 5 positionsby manually. stroke of height adjustable spine is 7 cm. back height adjustabilityis applicable for high back and mid back chair. pneumatic heightadjustment: the pneumatic height adjustment has an adjustment stroke of10.0 ± 0.3 cm. pedestal assembly with castors: the pedestal is injectionmoulded in black 30% glass-filled nylon and fitted with 5 nos. twin wheelcastors. the pedestal pitch-centre dia is ø66.1 ± 0.5 cm. (76.1 ± 1.0 cm. withcastors) . twin wheel castors: the twin wheel castors are injectionmoulded in black nylon. option of sliding seat mechanism: seat can beslide horizontally as per user convenience. stroke of seat slide is 5 cm. thisoption is available for revolving pedestal type of chair. overall dimensions ofchair seat height - min 45.0 to max 55.0cm. height - min 102.0 to max 119.0cm. width & depth of chair as measured from p

Dhs Plate Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

State Government