Latest di fitting Tenders | Government di fitting Tenders

corporations/Associations/Others

CTN :41244144

06 Aug, 2025 8.54 Lacs

Kolkata - West Bengal

Tender For restoration of 1550 mm dia fully choked up suction main 1 of rwps ph-i between jetty police camp and suction bell mouth of ph-i jetty under grww

Central Government/Public Sector

CTN :41246821

09 Aug, 2025 4.89 Lacs

Dhanbad - Jharkhand

Tender For repairing of complete rear drive and steer axle differential complete dismantling, fitting, differential crown gear with pinion, bevel gear with spider king pin, steering cylinder, etc as well as requires 02 nos. pcs, left and right out rigger repair

Central Government/Public Sector

CTN :40982139

04 Aug, 2025 NA

Goa - Goa

Tender For corrigendum : supply of single probe receiver assembly complete with tapered bell mouth housing release lever release lever lanyard and indicator arm , base plate for single probe receiver assembly , swivel arm assembly with slip pelican hook arm and bail and jackstay terminal fitting , hinged cover plate for probe receiver , adaptor hose to probe receiver complete with split camp , receiver hose assembly seven inches 177 mm x 4.5 m complete with reusable coupling at one end matching with receiver and the other end with female coupling matching with flange adaptor , flanged adaptor for re usable coupling flange adaptor should be suitable for 7in hose assembly with coupling at one end and din standard flange for 6in deck elbow at the other end , eye plate for in haul line for probe fuelling pl 13 tonnes , snatch block with shackle open type , eye plate for lead block pl 19.5 t , snatch block cw shackle pl 8 t 3 nos to be used on either port or stbd side at one time , 7 in split clamps , c spanner for 7in reusable coupling , c spanner for 7in adaptor , nato 3 avcat reception coupling incl cap and flange suitable for , nato 5 fresh water reception coupling and cap , aluminium fuel filter

Central Government And Public Sector

CTN :41220530

19 Aug, 2025 NA

Kaiga - Karnataka

Tender For supply of pump bowl, part no. 1200101, moc: ci, for kbl make napw pump model bhq37m , bell mouth, part no. 2110101, moc: cf8m, for kbl make napw pump model bhq37m

State Government

CTN :40935118

13 Aug, 2025 11.03 Lacs

Kheda - Gujarat

Tender For corrigendum : work of repairing of bell mouth and dynamic balancing of (weir) make cw pump of 210 mw stage ii of wtps.

State Government

CTN :41171002

01 Aug, 2025 2.12 Lacs

Kalyani - West Bengal

Tender For emergent restoration of bell mouth of approach road to sub division and distressed portion of boundary wall of section office under krishnagar n.h sub division of national highway division no-vi, p.w (roads) directorate during the year 2025-26.

CTN :41087291

28 Jul, 2025 30.00 Lacs

Awantipora - Jammu And Kashmir

Tender For annual rate contract for procurement of line material for maintenance and restoration of power supply in ed awantipora for the year 2025-26 - single core pvc insulated, double sheeted, aluminium unarmored 1100 v grade lt cable ( gloster/havells make/standard make only) 10 mm sq. single core pvc cable, single core pvc insulated, double sheeted, aluminium unarmored 1100 v grade lt cable ( gloster/havells/standard make only) 16 mm sq. single core pvc cable, single core pvc insulated, double sheeted, aluminium unarmored 1100 v grade lt cable ( gloster/havells/standard make only) 25 mm sq. single core pvc cable, single core pvc insulated, double sheeted, aluminium unarmored 1100 v grade lt cable ( gloster/havells/standard make only) 35 mm sq. single core pvc cable, single core pvc insulated, double sheeted, aluminium unarmored 1100 v grade lt cable ( gloster/havells/standard make only) 95 mm sq. single core pvc cable, single core pvc insulated, double sheeted, aluminium unarmored 1100 v grade lt cable ( gloster/havells/standard make only) 120 mm sq. single core pvc cable, single core pvc insulated, double sheeted, aluminium unarmored 1100 v grade lt cable ( gloster/havells/standard make only) 185 mm sq. single core pvc cable, single core pvc insulated, double sheeted, aluminium unarmored 1100 v grade lt cable ( gloster/havells make only) 240 mm sq. single core pvc cable, single core pvc insulated, double sheeted, aluminium unarmored 1100 v grade lt cable ( gloster/havells make only) 300 mm sq. single core pvc cable, single core pvc insulated, double sheeted, aluminium unarmored 1100 v grade lt cable ( gloster/havells make only) 400 mm sq. single core pvc cable, single core pvc insulated, double sheeted, aluminium unarmored 1100 v grade lt cable ( gloster/havells make only) 630 mm sq. single core pvc cable, 3.5 core pvc insulated, double sheeted, aluminium unarmored 1100 v grade lt cable ( gloster/havells make only) 35 mm sq. 3.5 core pvc cable, 3.5 core pvc insulated, double sheeted, aluminium unarmored 1100 v grade lt cable ( gloster/havells make only)50 mm sq. 3.5 core pvc cable, 3.5 core pvc insulated, double sheeted, aluminium unarmored 1100 v grade lt cable ( gloster/havells make only) 70 mm sq. 3.5 core pvc cable, 3.5 core pvc insulated, double sheeted, aluminium unarmored 1100 v grade lt cable ( gloster/havells make only) 95 mm sq. 3.5 core pvc cable, 3.5 core pvc insulated, double sheeted, aluminium unarmored 1100 v grade lt cable ( gloster/havells make only) 120 mm sq. 3.5 core pvc cable, 3.5 core pvc insulated, double sheeted, aluminium unarmored 1100 v grade lt cable ( gloster/havells make only) 185 mm sq. 3.5 core pvc cable, 3.5 core pvc insulated, double sheeted, aluminium unarmored 1100 v grade lt cable ( gloster/havells make only) 300 mm sq. 3.5 core pvc cable, single core xlpe insulated, double sheeted, aluminium unarmored 1100 v grade lt cable ( gloster/havells make only) 10 mm sq. single core xlpec able, 3.5 core xlpe insulated, double sheeted, aluminium unarmored 1100 v grade lt cable ( gloster/havells make only) 185 mm sq. 3.5 core xlpecable, 3.5 core xlpe insulated, double sheeted, aluminium unarmored 1100 v grade lt cable ( gloster/havells make only) 300 mm sq. 3.5 core xlpecable, single phase energy meter 5-30 amp/10-60 amp, dlms complaint of accuracy class 1.0, 16 mm2 pvc service cable unarmoured 2 core, 10 mm2 pvc service cable unarmoured 2 core, 3ph 4 wire lt prodgy meters, 415 v, meter seals, 11kv polymeric composite pin insulator 12kv, 5kn, lighting impulse 75kv positive and 80kv negative, creepage distance 320mm, 11kv porcelain pin insulator 5kn, 11 kv galvanised pins suitable for 11 kv pin insulators 700 gram, 11 kv guy insulators, 11kv polymeric composite disc insulator 12kv,min failing load 45kn, lighting impulse 75kv positive and 80kv negative, creepage distance 320mm with fitting, 11 kv disc fittings for polymer disc insulators (45 kn), 11kv go, ab switch 3-phase, 3-pole, 200 amp,alongwith gi pipe

corporations/Associations/Others

CTN :41128146

11 Aug, 2025 8.54 Lacs

Kolkata - West Bengal

Tender For restoration of 1550 mm dia fully choked up suction main 1 of rwps ph-i between jetty police camp and suction bell mouth of ph-i jetty under grww

corporations/Associations/Others

CTN :41112611

30 Jul, 2025 NA

Varanasi - Uttar Pradesh

Tender For 11 kv disc fitting 45 kn and 33 kv disc fitting 70 kn

Central Government/Public Sector

CTN :40718529

11 Aug, 2025 NA

Jaduguda - Jharkhand

Tender For corrigendum : spares for pneumatic diaphragm pump, model kdp-250 - spares for pneumatic diaphragm pump, model kdp-250, base screen part no.-dp1, suction manifold with nipple & socket part no.-dp2, d clamp small size with nut & bolt part no.-dp3a, high tensile bolt & nut small size part no.-dps3b, diaphragm outer cover part no.-dp4, diaphragm inner cover threaded part no.-dp5a, diaphragm inner cover hole type part no.-dp5b, valve housing complete part no.-dp6, s s sliding rod with nylock nut & washer part no.-dp7, sliding rod hex nut nylock part no.-dp7a, sliding rod back up washer part no.-dp7b, rubber ring of valve housing part no.-dpr7c, rubber ring of pressure plate part no.-dpr7d, asbestos packing of valve housing part no.-dpa7e, phosphorous bronze bush part no.-dp8, pressure plate inner hole type part no.-dp9, pressure plate outer threaded type part no.-dp10, csk screw small size part no.-dp11, csk screw big size part no.-dp12, valve box complete part no.-dp13, slide valve part no.-dp13a, end pad part no.-dp13b, circlip part no.-dp13c, rubber ring of end pad part no.-dp13d, allen screw part no.-dp13e, asbestos packing of valve box part no.-dp13f, d clamp big size with nut & bolt part no.-dp14a, high tensile bolt & nut big size part no.-dpb14b, delivery manifold part no.-dp15, exhaust nipple complete part no.-dp16, rubber ball of exhaust nipple part no.-dp16a, steel adopter of exhaust nipple part no.-dp16b, rubber diaphragm part no.-dpr17, rubber ball big part no.-dpr18, rubber valve seat part no.-dpr19, rubber cap of value box part no.-dpr20, strainer foot valve, gi bend with socket 3", gi reducer with nipple 3" x 2 1/2", gi reducer 3" x 2", hose adopter connector set 2", hose clamp 2", hose clamp 3", suction hose pipe 3" x 3 meter long pvc, air line lubricator 1 litre with 2 couplings, bolt & nut high tension part no.-dps3b (small), box valve complete with oil lubricator part no.-dp13, bolt & nut high tension part no.-dpb14b (big), rubber ball big part no.-dpr18, d clamp small size with bolt & nut part no.-dp3a, diaphragm inner cover threaded part no.-dp5a, diaphragm inner cover threaded part no.-dp5b, circlip part no.-dp13c, d clamp big size with nut & bolt part no.-dp14a(set), diaphragm rubber part no.-dpr17, exhaust nipple complete part no.-dp16, manifold suction part no.-dp2, delivery manifold part no.-dp15, screw allen part no.-dp13e, packing asbestos part no.-dpa7e, pressure plate inner. part no.-dp9, pressure plate outer part no.-dp10, packing asbestos part no.-dp13f, ss sliding rubber complete part no.-dp7, rubber ring part no.-dpr7c, csk screw small part no.-dp11, csk screw big part no.-dp12, valve rubber seat part no.-dpr19, spanner allen key part no.-spanner allen key, rubber ball (small) part no.-dp16a, diaphragm outer cover part no.-dp4, base screen part no.-dp1, valve housing part no.-dp6, sliding rod hex nuts part no.-dp7a, sliding rod back up washer part no.-dp7b, rubber ring part no.-dpr7d, phosphorous bronze bush part no.-dp8, slide valve part no.-dp13a, end pad part no.-dp13b, rubber ring part no.-dpr13d, lubricator part no.-blg30, steel adapter part no.-dp168, end pad puller, nose plier, diaphragm lever, rubber ring puller, diaphargm fitting and opening tools and alu taper bush, base screen part no.-dp1, suction manifold with nipple & socket part no.-dp2, d clamps (small size) part no.-dp3a, high tensile bolt & nut part no.-dps3b, diaphragm outer cover part no.-dp4, diaphragm inner cover (threaded) part no.-dp5a, diaphragm inner cover (hole type) part no.-dp5b, valve housing part no.-dp6, ss sliding rod complete part no.-dp7, sliding hex nut (nyloc) part no.-dp7a, sliding rod back up washer part no.-dp7b, rubber ring of valve housing part no.-dpr7c, asbestos packing of valve housing part no.-dpa7e, phosphorous bronze bush part no.-dp8, pressure plate inner (hole type) part no.-dp9, pressure plate outer (thread type) part no.-dp10, csk screw (small size)

Di Fitting Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors