Get complete information related to latest Di Pipe Scrap Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Di Pipe Scrap Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Di Pipe Scrap Tenders.
Tender For repairing of damaged 400 mm dia pipe line to discharge of the storm water into isp sewer near jaildar wala bagh in badli village, ac-05 badli constituency under ee(c)-011
Tender For annual rate contract for provding new water service connection with material under division siwana - providing household tap connection as per technical specification and approved drawing as per relevant is code (amended up to date) from hdpe/upvc/di/ac/ms/gi pipe line up to consumer meter/premises by using pp mechanical integrated saddle with inbuilt flow control valve made out of ss316 designed for 5 lpm discharge at 0.5 bar pressure , not exceeding the flow of 7 lpm at 2 bar and a compression elbow, moulded in single piece/ fusion welded (complete job) including digging out suitable size of pits and trench for laying service line in all kinds of soil; depositing and refilling of pit & jhiri with watering & ramming /compacting in layers and disposal of surplus excavated soil as directed with in a lead of 100 meter ; providing & fixing of all fitting duly approved in accordance with specification for potable water including gm full-way valve (is:778 mark) or wheel valve and specials with 20 mm nominal dia mdpe pipe pe 80 pn 16 as per iso 4427 / 20 mm nominal dia ppr-c (three layered) pipe pn16 sdr 7.4 (is:15801:2008) (isi mark) and above ground level using ppr-c pipe with standard ppr fittings/ gi pipes in the premises for fixing a tap / meter box (excluding) ,including accessories with flushing, cleaning, disinfecting and testing of pipe line complete required for making of service connection complete in all respect including labour charges . the service line should be laid at least 45 cm below ground level. note: road cut and restoration is not part of this item and paid separately. for connection with 20 mm dia mdpe/ppr-c pipe length up to 05 mtr. rate is exclusive of gst., road cutting for house hold service connection in minimum trench width wherever road crossing is required. road cutting of cement concrete,wbm, black top etc. of all thickness shall be done by using a concrete cutter machine keeping minimum trench width and restoration of the road with cement concrete with pcc m-10 and cc m-30 grade as per specification and direction of engineer in charge.(06 meter) rate is exclusive of gst., add extra over item no 1.21, 1.22 & 1.23 for providing 20 mm pe 80 pn 16 as per iso 4427 mdpe pipe including excavation, providing, laying & jointing of service line above 5.00 mtr. rate is exclusive of gst., road cutting charges for pit of size 1.0x1.0 mtr for providing connection dismantling of cement concrete pavement for pipe line and chambers by mechanical means using pneumatic tools, cutting the peripheral edge by cc cutter, breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials up to a lead of 1000 meters. measurement for dismantled trench to be made as per standard trench width specified in tender document and no extra payment shall be made be made for trench width more than specified, re-handling of material/earth to complete the tasks as per technical specification and scope of work. (0.30 cum) rate is exclusive of gst., road restoration charges for pit of size 1.0x1.0 mtr for providing connection providing and laying in position cement concrete m10 grade nominal mix 1:3:6 (1 cement : 3coarse sand : 6 graded stone aggregate 40 mm nominal size) in base course complete including all material, labour, machinery, lighting, guarding for road restoration work in trenches of pipe line and chamber work. measurement for cc work to be made as per standard trench width specified in tender document and no extra payment shall be made be made for trench width more than specified, complete work as per technical specification and scope of work. (0.10 cum) rate is exclusive of gst., providing and laying in position cement concrete in specified grade over prepared base course complete including finishing, curing, all material, labour, machinery, lighting, guarding for road restoration work in trenches of pipe line and chamber work. measurement fo
Tender For supply of tree prunner , axe , power operated grinding cum wire cutter , battery operated cutter , concreate cutting machine , 3 by 4 manila rope 20 m long , 1 by 2 manila rope 20 m long , 1 inch manila rope 20 m long , 1 by 2 inches manila rope 2 m long , tirfor 3 ton or 5 ton , tirfor one point six ton , tirfor zeor point seven five ton , pull lift three ton , pull lift one point six ton , pull lift zeor point seven five ton , along clamp contact wire , catenary wire come along clamp , feeder wire cum along clamp , aew wire come along clamp , large span come along clamp , frp type discharge rod , rail jumpers , steel sling 01 mtr , polyster webbing sling 01 mtr , steel sling 02 mtr , polyster webbing sling 02 mtr , steel sling 03 m , steel sling 04 m , steel sling 10 m , 1 inch d shackles , 3by4 inch d shakels , 1by2 inch d shackles , steel pulley 6 inch , steel pully three and half inch , search lights 10 w , halogen fittings 500 w , halogen bulb 500 w spare , extension board with cable of 20 mtr 10sq mm , portable generator 2 or 3 kva , led torch light , sludge hammer , wire claws panja , gl wire 8 swg , crow bar , shovels , safety belts , helmets , rubber gloves , banner flags , hand signal flags red and green , stretcher , thermometers , contact wire splicing jig , bull dog clamps , contact wire kink removers , contact wire twister cum bender , de spanner size 6 by 7 to 30 by 32mm , ring panner size 6 by 7 to 30 by 32mm , secrew driver 18 inch , secrew driver 16 inch , screw driver 12 , secrew driver 8 inch , secrew driver 6 inch , insulated cutting pliers 8 inch , insulated nose pliers 8 inch , adjustable pipe wrench 12 inch , adjustable spanner 12 inch , adjustable spanner 8 inch , adjustable spanner 6 inch , set of screw drivers , allen key size 2 to 10mm , grease gun , bond lever
Tender For service contract for painting of unit-4 ndct inlet pipe line and cw, acw basement and discharge lines during unit-4 oh and unit-2 cw return to idct inlet line during unit-2 oh periods at sgtpp, wbpdcl
Tender For estimate for supply, erection & commissioning of various electromechanical equipment like 5 no. 5 cs. vt pump, electric motors, starter panel and other allied material for flood protection works from the field area of village dang khurd & outfall at rd 65000-r of nigana feeder in lift w/s (m) division, bhiwani for the year 2026-27. - supply, erection & commissioning of 5 c/s axial/mix flow water lubricated vertical flood pumps of 5 cs. discharge at 1440 rpm at static head of approx 6.0 mtr. having adjustable height, including ms bend including flange welding, ss/ht nut & bolts etc complete in all respect as per site requirement with epoxy coating & as per approved specifications of the department, supply, erection & commissioning of solid shaft motor of capacity 30 hp, 1440 rpm, 3 phase, 380 volt+- 10%, with eficiency class ie2 (with 35 mtr compatible 3 phase submersible cu cable from motor to panel/starter) suitable for fitment with 5 cs. v.t axial/mix flow pump type vertical flange mounted as per approved specifications of the department., supply, erection & commissioning of fully automatic star delta starter of cap. 150 amp including all accessories as one incomer of mccb (150amp) with 1 no mcb for lighting load, contactor rating 120 amp, 90 amp, 70 amp with control transformer for control supply, outgoing indicator, having mpr & all types of protections i.e.uv/ov/ over current, phase imbalance/phase reversal protection, locked rotor, dry run etc, digital meters, push buttons, bus bars, capacitor bank, seperate relay for single phase protection etc. complete in all respect suitable for open fields operation of 1 no. motor of capacity of 30 hp with a stand of ms channel with canopy having suitable operating height above the kachha open fields as per approved specifications of the department. (suitable for voltage range 380 +- 10%,) panel should be outdoor type., supply, erection & commissioning of m.s delivery pipe 10" dia. made of ms plate both end flanged (equal to or less than 6 mtr length of pipe) as per approved specification & make. (including ss/ht nut & bolt, rubber packing & other fitment accessory required), supply, erection and commissioning of ms girder parallel flange section ismb 150 with primer and bituminous based paint inside & outside of length 4mtr (approx wt 60 kg per pc) as per approved make & conforming to is808:2021.
Tender For supply of 2 tr three star single phase split air conditioner machine non inverter rated cooling capacity more than or equal to 6300 with copper condenser coil , standard installation charges 2 tr split ac machine and closing of hole with white cement , 1.5 tr three star single phase split air conditioner machine non inverter rated cooling capacity more than or equal to 5000 with copper condenser coil , standard installation charge 1.5 tr split ac machine closing of hole with white cement , metal bracket for mounting outdoor unit , supply and fixing of pvc drain water pipe for installation , supply and fixing of 3 core 2.5 sq.mm flexible frls copper cable, excluding standard installation material , supply and fixing of refrigerant copper pipe suction and discharge with nitrile insulation and wrapping , 2 tr two star single phase window air conditioner machine non- inverter with copper condenser coil , standard installation charge for installation of 2 tr window ac machine
Tender For supply of kit consisting of 8 items for gasket of btpn wagons. 1) safety valve jointingto drg no wd-86081/s-61 item 16,alt-14, qty/kit-1 2) man hole jointing to drg no wd-86081/s-61, item-4 alt-14, qty/kit-2 3) vapour extractor jointing to drg no.wd 86081/s-61,item 5, alt-14- qty/kit-2, 4) filling pipe jointing to drg no wd-86081/s-61 item 6 alt 14- qty/kit-2, 5) flange jointing to drg no wd 86081/s-66 item 11 alt 16 - qty/kit-4, 6)gland ring for 100 mmltp valve to drg no wd 93066/s-7 alt-1 - qty/kit- 2, 7)gasket for 100 mm ltp valve to drg no wd 93066/s-4 alt 1 - qty/kit-2, 8).gasket for discharge pipe flange j&td/cw/per/sr/drg.no.sk-740 alt nil - qty/kit-4. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]