Tender For supply of installation of network fire alarm panel - supply installation of network fire alarm panel model fc922 siemens , supply installation of monitor module for wld temperature and fire panels etc integraation at data centre panel model xtri m siemens , supply installation of relay module for hooters installed at security gate siemens , supply installation of hooter cum strobe siemens , ms enclosures for modules fixing , supply installation of 24v power supply modules for hooters , supply and laying of cabling for ibms panels like wld temperature and egdms fire alarm panel etc to fire alarm panel at new data centre , supply and laying of 6 core single model ofc cable legrand or d link , supply and installation of media converters patch cords and required splicing setuup for ofc cable , hard soil excavation and closing for cable road crossing upto 15 mtr length , commissioning and testing charges for above setup
Tender For different pipeline work a) erection of new 6 inch dia pipe line from rcml bc11 to ecl main crusher for quenching of fire in coal stock near kendua dump b) diversion of ms pipeline while crossing of haul road through inside of rcc hume pipe c) dismantling of 8 inch dia ms pipe line lohandia patch d) re-alignment of 14 inch dia ms pipe of 4000 gpm pump kirloskar make upward side of kaveri view point e) realignment of 6 inch dia pipe line of fire fighting pump near intermediate sump of rocp
Tender For manufacture and supply of fitting for level crossing on psc sleepers bg for 60 kg to rdso drg. no.t-4916 with latest amendments/ alterations if any and with latest corrigendum issued upto 20 days prior to the closing of tender. fittings are to be supplied in sets. (one set consist of 02 nos. c.i. brackets to drg. no.rdso-t-4917 alt.ii and specification is 210-1962 gr.20 irs-t-10, 02 nos c.i. distance brackets to drg. no. rdso t- 4785 and specification is 210-1962 gr.-20 irs-t-10, 02 nos turned bolts 22mm dia with nuts to drg. no.t-11550 and specification t-23/67 with latest corrigendum, 04 nos single coil spring washer to drg. no. rdso-t-10773 and specification irs t-42-1988 and 04 nos plate screw to drg. no.t-3913 and 2 nos ms packing plate to rdso drg no t-4784/1) [ warranty period: 30 months after the date of delivery ]
Tender For corrigendum : provision of lt cable, lt panel and connected items at trg area of 01 assam under ge e/m lucknow - excavation in trenches in soft/loose soil not exceeding 1.5 mtr deep and not exceeding 1.5 mtr wide and getting out complete all as specified and as directed by the engineer-in-charge., returning, filling in including spreading, levelling, watering and well ramming in layers n.exc 25cm thick using excavated soil complete all as specified and as directed., removing excavated soil n.exc 50 m and depositing where directed at a level n.exc 1.5 m above the starting point complete all as specified and as directed., material and labour for dry river sand, washed and screened dry for cushioning to under ground cable in trenches below and around under ground cable including spreading, levelling & punning complete as specified and directed .note :- punned thickness (18 cm) shall only be considered for payment., m&l for laying of fly ash brick designation 100 kg / sqcm, using old size bricks confirming to is 12894, laid flat with width equal to length of brick, laid dry over electric cable for protection complete all as specified & directed by engr-in-charge., deployment of tools & manpower for boring /drilling (horizontly) manually / mechanically under existing road max 10 m in width) suitable for passing pipe of any descreption of dia 40 to 100 mm complete all as specified and directed by engineer in charge, supply, laying jointing and testing lt ug cable xlpe insulated, screened, pvc bedded, galvanized steel strip or wire armoured is 7098 marked, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 120 sq mm 3.5 core, laid in trench / laid under floor or fixed naked with wall / on wall / in ducts / in gi pipes etc. with and includings ms clamps, nuts, bolts, washers complete all as specified and directed. note- excation, earth works,and sand cushioning, protection bricks and pipe shall be measured and paid seprately under given items., all as per item no 07 above but lt under ground cable of size 95 sqmm 3.5 core, all as per item no 07 above but lt under ground cable of size 70 sqmm 3.5 core, all as per item no 07 above but lt under ground cable of size 50 sqmm 3.5 core, all as per item no 07 above but lt under ground cable of size 16 sqmm 4 core, s&f cable jointing kit for 1100 v (earthed) grade cable for straight through heat shrink type joint complete with jointing material and accessories suitable for 3.5 core 25 to 50 sqmm xlpe armoured aluminium conductor ., s&f cable jointing kit for 1100 v (earthed) grade cable for straight through heat shrink type joint complete with jointing material and accessories suitable for 3.5 core 70 to 95 sqmm xlpe armoured aluminium conductor, m&l for 80 mm bore mild steel galvanised water tubing, light grade with all fittings and fixed to walls or laid on floors / fixed to poles / or passing under road crossing, for protection of ug cable complete all as specified and directed by engr-in-charge. , m&l for earthing complete with galvanised steel earth plate electrode of size 600 mm x 600 mm x 6 mm thick buried directly and vertically in ground with top edge of the plate not less than 2.25 mtr from gl, connected with galvanised iron strip 32 x 6 mm, all as shown in plate no-3, of ssr, connected to the earthing test point, concrete pit in pcc 1:3:6 type c-2with rcc precast pit cover slab 400 mm x 400 mm x 50 mm with handle for lifting made out of 8 mm dia ms rod, funnel, wiremesh, 50 mm dia light grade gi tubing for protection of gi strip 32 x 6 mm, charcoal and salt in alternate 150 mm thick layers around gi earth plate, including necessary returning filling in & removal all as specified or indicated in ssr part-i, including testing to achieve earth resistance value as per is specification on completion, supply, installing, testing and commissioning factory made, cpri approved, confirming to is-5039, overall powde
Tender For laying of 1700 mm dia. ms casing pipe by micro tunneling method for railway crossing for laying 1400 mm dia. ms carrier pipe. (job no.12/2025-26).(reinvite)
Tender For supplying and laying of m.s. conduit of 600 mm diameter internal as casing pipe across and underneath road and railway crossing by adopting trenchless jack pushing technique within tamralipta municipality underamrut2.0