Latest diaphragm sealed gauge Tenders | Government diaphragm sealed gauge Tenders

State Government

CTN :45303634

30 May, 2026 NA

Ranchi - Jharkhand

Tender For e quotation for none schedule item rate - stone boulder of size 150 mm and below at quarry, supply of quarried stone 150 - 200 mm size for hand broken at quarry, boulder with minimum size of 300 mm for pitching at quarry, gravel/quarry spall at quarry, gelatin 80%, jute netting, open weave, 2.5 cm square opening for seeding and mulching, random rubble stone, sand bags (cost of sand and empty cement bag), square rubble coursed stone, stone bricks of size, (i) 250 mm x 125 mm x 100 mm, (ii) 250 mm x 125 mm x 125 mm, (i) g.i. wire (8 to 10 swg), (ii) black annealed (8 to 10 swg), binding wire, (i) annealled wire (20 to 25 gauge), (ii) black annealed (20 to 25 gauge), expanded metal (18 gauge) 40 mm x 25 mm x 75 mm wide, bituminastic board (for use as per expansion joint i.s.1838-1938 filter), (i) 25 mm thick, 150mm dia r.c.c.np2 perforated pipe, pressure release valve, (i) safety valve, (ii) pocket valve, cost of burnt clay pipe of internal dia 31.70 mm (11/4")external dia 38 mm (11/2"), (i)100 mm long, (ii)225 mm long, fuse coil, bolts 20 mm dia 25 cm long, coal tar, nuts and bolts 16 mm dia375 mm long with washer etc, palm leaves, check valve 38 mm dia., 38 mm dia. water hose 30m long, nx core bit 48 cts(imp), nx core bit 38 cts(imp), nx tc bit, bx tc bit, nx st reamer cell 6.5 cts(imp), bx st reamer cell 6.5 cts(imp), good quality wooden core box 3 metre long x 0.85 metre wide x0.15 metre deep with longitudinal compartment to accommodate 5 rows of 3 metre long cores i.e. total 15 metre

State Government

CTN :45304161

30 Jun, 2026 NA

Parganas - West Bengal

Tender For internal electrical installation and wiring of newly constructed administrative building including supply of all materials at barasat 220kv s/s under barasat area office, wbsetcl as per schedule - supplying and fixing double door vertical tpn 160a mcb distribution board (8way), for mccb incomer with ip-42/43 protection, on angle iron frame on wall & mending good the damages to original finish incl. inter connection with suitable size of copper wire and neutral link & provision for earthing attachment. pwd sch page d-11 item no 15. (legrand make) , supplying and fixing 415 v 125 a (4p) four pole mccb of breaking capacity 25ka/35ka with fixed thermal and fixed magnetic / adjustable thermal and fixed magnetic setting in existing dbs / enclosure and necessary connection. pwd sch page d-08 item no 10. (legrand make), , supplying and fixing 240/415 v sp mcb (6-32)a (for out going) of breaking capacity 10ka & c characteristics on din rail of existing dbs and necessary connection. pwd sch page d-6 item no 07. (legrand make), , single phase lighting distribution, , supplying and fixing double-door (2+12 way) spn mcb distribution board with ip-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. inter connection with suitable size of copper wire and neutral link & provision for earthing attachment. pwd sch page d-9 item no, , supplying and fixing 240/415 v 32a dp mcb (incommer) of breaking capacity 10ka & c characteristics on din rail of existing dbs and necessary connection. pwd sch page d-6 item no 07., , supplying and fixing 240/415 v (6-32)a sp mcb (out going) of breaking capacity 10ka & c characteristics on din rail of existing dbs and necessary connection. pwd sch page d-6 item no 07., , point wiring, , distn. wiring in 22/0.3 (1.5 sqmm) single core stranded 'fr' pvc insulated & unsheathed single core stranded copper wire (brand approved by eic) in 19 mm bore, 3 mm thick polythen pipe complete with all accessories embedded in wall to light/fan/call bell points with modular type switch (brand approved by eic) fixed on modular gl switch board with top cover plate flushed in wall incl. mending good damages to original finish. pwd sch page e-20 item no 1. (iii) (average run 8 mtrs), , point wiring on board, , distn. wiring in 22/0.3 (1.5 sqmm) single core stranded 'fr' pvc insulated & unsheathed single core stranded copper wire (brand approved by eic) in 19 mm bore, 3 mm thick polythen pipe complete with all accessories embedded in wall to 240 v 6a 5 pin plug point incl. s&f 240 v 6a 3 pin modular type plug socket & modular type switch (brand approved by eic) incl. s&f earth continuity wire, fixed on 4 module gl switch board with 3/4 module top cover plate flushed in wall incl. mending good damages to original finish. pwd sch page e-20 item no 3(i), on, , concealed cutting channel, , cutting channel of 31 mm x 31 mm size on masonry wall incl. s&f heavy gauge polythene pipe dia as stated below, by means of iron hooks and supplying and drawing 18 swg gi wire fish wire incl. mending good damages to building works. pwd sch page e-2 item no 2a. 13 mm dia 3 mm thick polythene pipe without earth, , cutting channel of 31 mm x 31 mm size on masonry wall incl. s&f heavy gauge polythene pipe dia as stated below, by means of iron hooks and supplying and drawing 18 swg gi wire fish wire incl. mending good damages to building works. pwd sch page e-2 item no 2a. 13 mm dia 3 mm thick polythene pipe without earth, , distribution wiring, , 2x36/0.3 (2.5 sqmm) + 1x22/0.3 (5 sqmm) as ecc, pwd sch page e-9 item no 1. make: kei/mescab/finolex, , 2x56/0.3 (4 sqmm) + 1x36/0.3 (2.5 sqmm) as ecc, pwd sch page e-9, , 2x84/0.3 (6 sqmm) + 1x56/0.3 (4 sgmm) as ecce) 4x126/0.4 (16 sqmm)+2x80/0.4 (10 sgmm) as ecc, pwd sch page e-9, , 4x80/0.4 (10sqmm) + 2x84/0.3 (6 sqmm) as ecc, pwd sch page e-9, , air conditioner, , supply & fixing 240 v, 25a modula

CTN :45305833

08 Jun, 2026 35.94 Lacs

Faridabad - Haryana

Tender For beautification works in including play equipment, open gym, plantation and repairing of boundary wall at brahampuri park saran village boosting park in ward no. 09 nit faridabad.(recall) - labour charge for making tee connection with existing line excavation, cutting jointing and making connection with existing line complete in all respect, supply and fixing of pvc tee 150x150x150mm dia., chain swing (2seater): 10 l x 6 w x 8 .5 h. horizontal frame and vertical legs is of m.s. pipe 2 x 12 gauge. it stays with m.s. pipe 1 x 12 gauge. swinging seats-2nos is of frp molded seat of 2mm thick fitted with m.s. pipe frame x 12 gauge which hang with m.s. chain 6mm thick duly plated with ball bearing and m.s. flat 6mm thick housing. complete with epoxy primer (interseal 670 hs) and pu finish (interthane 990) paints (protective coating division) in multi colors item with gst, transportation, installation with c.c and amp: labor at site., sea saw (4seater): - 8 l x 5 .5w x 15 high. frame is of m.s. pipe 2 x 12 gauge. sitting planks is of m.s. pipe 2 x 12 gauge and its cantilever and handles is of m.s. pipe x 12 gauge. sitting seats 4 nos. is of molded frp material in 3mm thick with epoxy primer (interseal 670 hs) and pu finish (interthane 990) paints (protective coating division). complete item with gst, transportation, installation with c.c and labor at site., bridge ladder: 10 l x 2 w x 6 h. horizontal ladder is of m.s. pipe 2 , andamp: vertical ladder is of same material of 12-gauge isi mark with epoxy primer (interseal 670 hs) and pu finish (interthane 990) paints (protective coating division). complete item with gst, transportation, installation with c.c and amp: labor at site., merry-go-round (4-seater): 5 dia. main frame is of m.s. sq. pipe 2 x 2 x 14 g and having suitable handle andamp: foot-rest is of round pipe x 12 gauge. central pipe is of m.s. pipe 3 x 12 g with heavy duty shaft 50mm thick andamp: ball bearing assembly. it consists of 4no chair made of molded frp plastic. complete with epoxy primer (interseal 670 hs) and pu finish (interthane 990) paints (protective coating division) in multi colors item with gst, transportation, installation with c.c and amp: labor at site., pvc reducer 150mm x 100mm.., frp dustbin (tilting type) of capacity 60 ltr. body is made of moulded fiberglass re-enforced plastic (non- halogen fire retardant resign) of 2mm thick having its lid with handle. it fitted with m.s. square pipe 1.25` x 1.25` x 14 gauge and m.s. flat 50 x 5mm, 30x 5mm base structure with epoxy primer interseal 670 hs and pu finish (interthane 990) paints. complete item with gst. transportation, installation with cc and labor at site., making connection with existing sewer main line, p/f of pvc 100mm dia bend., supply of pvc pipe 150 mm dia with isi mark 8kg.cm2 pressure, supply of good earth complete as per site requirement, p/f chest press is made from is-1239 b class gi-pipe. the center pipe is of 100mm nb made from b class gi-pipe, and the bottom support is of ms round plate of 250mm dia and 10mm thick is welded at the bottom of the pipe. the remaining frame is made of 32mm nb b class gi-pipe. the handle frame and seat is made of 32mm nb b class gi-pipe. connecting rod is made from 25mm nb b class gi-pipe. seat is made from roto-moulde. for the assembly different bushes are used which is made from 60mm with 3mm thick seamless pipe is used., p/f seated puller is made from is-1239 b class gi-pipe. the center pipe is of 100mm nb made from b class gi-pipe, and the bottom support is of ms round plate of 250mm dia and 10mm thick is welded at the bottom of the pipe. the remaining frame is made of 50mm and 25mm nb b class gi-pipe. the handle frame and seat is made of 32mm nb b class gi pipe. connecting rod is made from 25mm nb b class gi-pipe. seat is made from ms sheet of 2mm thick. for the assembly different bushes are used which is made from 60mm with 3mm thick seamless pipe is used, p/f sky walker is made from is-1239 b class

CTN :45290536

15 Jun, 2026 NA

Bhopal - Madhya Pradesh

Tender For e-tender are invited online for the supply of veterinary instrument, equipments and others item from manufactures,stokist and authorized distributors for the year 2026-27 - a.i guns french mini with container (as per specifications) (sample), a.i kit (as per specifications) (sample), a.i sheaths french mini (as per specifications) (sample), a.i.crate cum travis (as per specifications) (sample), disposable a.i gloves (as per specifications) (sample), straw cutter round plastic body (as per specification) (sample), p.v.c. goblets made of virgin plastic round size 35mm x118mm (sample), p.v.c. goblets made of virgin plastic round size 65mm x118mm (sample), rubber gum boot size 9 no(sample), rubber gum boot size 10 no (sample), allies tissue forceps size 8 (sample), long forceps size 20 (sample), long curved throat forceps (sample), dressing forceps straight 30cms (sample), dressing scissors curved 8 (sample), dressing scissors straight 8 (sample), artery forceps straight 8 (sample), artery forceps curved 8 (sample), clipper scissors size 20 cm curved (sample), mayo scissors straight 7.5 (sample), mayo scissors curved 7.5 (sample), suture cutting forceps size 6 (sample), suturing needle straight traumatic and traumatic size no. 1 (pkt of six) (sample), suturing straight curved traumatic and traumatic size no.5 (pkt of six) (sample), b.p blades sterilized with isi mark (pkt of 100 blades) size 15 (sample), b.p blades sterilized with isi mark(pkt of 100 blades) size 24 (sample), b.p handle size 4 (sample), b.p handle size 3 (sample), disposable needle 20 gauge 1.5 (sample), disposable2 ml syringe with needle (as per specification) (sample), disposable 5ml syringe with needle (as per specification) (sample), disposable10 ml syringe with needle (as per specification) (sample), disposable 20 ml syringe with needle, disposable syringe without needle 2 ml (as per specification) (sample), disposable syringe without needle 20 ml (as per specification) (sample), disposable syringe without needle 50 ml (as per specification) (sample), 5 ml disposable syringes with needle 21 (as per specification) (sample), automatic breaking single use vaccination syringe 2 ml 16g, 3/4 inches needle (sample), automatic breaking single use vaccination syringe 5 ml 18g, 3/4 inches needle (sample), disposable i.v set sterilized, non-pyrogenic, with double filter and needle 16 1/2 gauge (sample), operation table for large animals (hydraulic) (as per specification) (catalogue), operation table hydraulic for small animal with remote (as per specification)(catalogue), working table for hospital and labs (as per specification) (sample), examination table (as per specification) (sample), veterinary surgical equipment kit (for large animals) (as per specification) (sample), veterinary surgical equipment kit (for small animals (as per specification) (sample), polyglact in 910 with ingra care coating 3-0 round body, polyglact in 910 with ingra care coating 1-0 reverse cutting, absorbent pad (size 20x8 cm) sample, absorbent pad (size 12x12 cm) sample, chromic 1 , rb (as per specification) (sample), bb silk 2-0 rb(as per specification) (sample), autoclave 10 lit. with dressing drum bin ss (as per stratification) (sample), hoof cutter double action (sample), instrument cabinet (as per specification) (sample), instrument trolley (as per specification) (sample), hoof trimming set (as per specification) (sample), docking machine for large animals, chrome plated (sample), bowls stainless steel size 20 cms (sample), long range vaccine carrier 20 lit. (as per specification) (sample & catalogue), vaginal speculum for small animals size 6 (sample), vaginal speculum for large animals size 14 (sample), trocar and cannula for large animals with metal handle ss(sample), i.v. catheter (as per specification)(sample)(sample & catalogue), teat surgery set complete (as per specifications)(sample), dystokia set (as per specification)(sample), stethoscope (as per specification)(sample

CTN :45063622

30 May, 2026 NA

Visakhapatnam - Andhra Pradesh

Tender For corrigendum : supply of 25vkoc005 c c - joint , main bolts , inner star , gfl bolts , gfl washer , clamping collar , clamp , valve for water pump , bush , fresh water cooler relience make , spare part kit for fw/sw heat exchanger , starting air conn.inlet , engine inlet pressure connection , governor speed setting air inlet connection , rack position limiter , fuel rack indicator , pressure transmitter p5r-4bar-4-20-1/2-pe , pitch indicator 0-20ma , pl96 , relay 4no-nc 24v dc , solenoid valve (nomo-24 vdc) , cd3 cable (5mm) , safeties reset push button , emerg. stop push button , scanner thermocouple pcb , display pcb , press.sw. (item no.17 of engraved ckt) , pressure regulator , pneu p.b. pneu return red , pneu. switch , s w engine driven pump assembly , stud m12 40 30n j12 nse1 181 , oring an7 31b6 , o ring 151i d 3d nse6.531 21a7 , filtering unit , viton oil seal 15x30x10 , fuel filter element , protect cyl head tie rod , injector body extractor , inj.pump and pump head extractor , flexible hoses , high pressure hand pump , bearing unit , bush sealing , bolt-connecting rod , o ring , thrust -stopper , top spring collar (bar) , bottom spring collar , dunb bushes 25-25 du , shaft , seal bearing housing , coupling pin , sealing joint , bs ring , type c30 , nse 6.51 , 20 , paper insert , o ring , needle roller bearing , rucompensation probe for exh. pyrometric duct , hydraulic jack for cylinder head , tool valve guide extractor , tool cylinder head test pressure , flex hose for hydraulic tool , high pressure hand pump , tee connection , safety valve , water pump impeller , scraper ring , round gasket , flexible hose for air , spare gauge glass 583 , sealing bush , piston ring , safety ring for abb vtr251-2p t/c , gfl washer , pressure switch(p 16 bars) , pressure switch(p 19 bars) , normal stop electro distributor , circuit selector , tt-314 sensor for main engine fresh water temperature , 25 pin sub d female connector , pressure gauge forbes marsh 100ss , ss316 0-4 bar glyf fil , pressure gauge forbes marsh ss316 0-40 bar glyf fil , pressure switch for s/by pp (range 0-4 bar) , pneumatic distributor pneu/pneu , sph card (sph) , lub oil pressure safety , pressure switch-1 to 10 bar , bearings individual alarm card (aip) , convertor module t454 t456 lub oil temp , svae - over speed cards , engine speed indicator 0-1250 rpm 96x96 , cock with filter , distributor iso 541 pneumatic spring , distributor iso 541 pneumatic/spring , iso1 distributor pneu.control/pneu.return , switch 3 pos. (1tc , auto , 2tc) , engine control unit (ecu) , gasket , fuel pipe m14xm14b , parallel , 750l , 9.0 i.d. , sae 100 r6 , booster servo motors with connectors , meta flex gasket , meta flex gasket , meta flex gasket , fuse 0.5a , link cable pc/tsx plc length -3mtr , oil pressure security card (sphem) , speed raise lower actuator 2no contacts , touch screen color display unit , 3 position switch , fuel pipe(return) m12x1.5 male plugxm14 x1.5 banjo(700mm) , universal crimping tool , oil mist detector , time delay relay (off delay) , pyrometric duct bank a

CTN :45283098

18 Jun, 2026 NA

Howrah - West Bengal

Tender For supply of form no. com-244&245/com-5&6. daily train cash earning summery. book of 100 leaves.1) unit-number of books, 2) size- 305x430mm, plus/minus 5mm, 3) printing paper- white map litho 60 gsm, i.s no. 1848/part(1) 2018. 4) printing- both side continuous heading, serial number and columnfrom left to right in black ink , printing matter to be collected from consignee, 5) binding- books of 9 sets of 11 leaves each of which one large and 10 small and 1 extra-large, left side three stitching by 20 gauge wire with brown kraft paper cover of 110 gsm of i.s no 1397/90 grade-ii (mg), 6) sample:- one sample for printing, binding and finishing to be got approved from consignee before bulk printing, 7) packing: each pack will contain ten plus ten total twenty blocks. each ten blocks must be wrapped in more than 50 micron transparent poly propylene foil or bag as suitable as approved by govt. and packed in suitable size of five ply corrugated cartoon box with proper label (printing size 48pt.) of p.l.no. form no. & serial no. if any. special condition:- quantity is in number of books and material to be supplied in book. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

CTN :45283748

22 Jun, 2026 NA

Howrah - West Bengal

Tender For supply of form no. t/409 caution order. book of 50 leaves in triplicate (50x3foils).1) unit- number of books, 2) size- 215x305 mm, plus/minus 5mm, 3) printing paper- white map litho 60 gsm, i.s no. 1848/part (1) 2018. 4) printing- one side in blue ink and rulling & numbering in black ink, printing matter to be collected from consignee, 5) binding- top two stitching by 20 gauge wire with brown kraft paper cover of 110 gsm of i.s no 1397/90 grade-ii (mg), 6) sample:- one sample for printing, binding and finishing to be got approved from consignee before bulk printing, 7) packing: each pack will contain ten plus ten total twenty books. each ten books must be wrapped in more than 50 micron transparent poly propylene foil or bag as suitable as approved by govt. and packed in suitable size of five ply corrugated cartoon box with proper label (printing size 48pt.) of p.l.no. form no. & serial no. and cartoon serial. special condition:- quantity is in number of books and material to be supplied in book. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

CTN :45283944

23 Jun, 2026 NA

Howrah - West Bengal

Tender For supply of form no. op/t-48/opd-2. station master diary book. books of 100 leaves. 1) unit-number of books, 2) size- 215x305mm, plus/minus 5mm, 3) printing paper- white map litho 60 gsm, i.s no. 1848/part(1) 2018. 4) printing- both side in black ink , printing matter to be collected from consignee, 5) binding- center two stitching by 20 gauge wire with brown kraft paper cover of 110 gsm of i.s no 1397/90 grade-ii (mg), 6) sample:- one sample for printing, binding and finishing to be got approved from consignee before bulk printing, 7) packing: each pack will contain ten plus ten total twenty books. each ten books must be wrapped in more than 50 micron transparent poly propylene foil or bag as suitable as approved by govt. and packed in suitable size of five ply corrugated cartoon box with proper label (printing size 48pt.) of p.l.no. form no. & serial no. if any. special condition:- quantity is in number of books and material to be supplied in book. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

CTN :45210459

17 Jun, 2026 NA

Bokaro - Jharkhand

Tender For supply of set of spare for midland make air flow indicator gauge to clw's drg. no.-1209-18-306-226 (alt.- 1) (each set 4 items=8 nos).-- (1) 12 mm poly carbonate glass (98.5 mm dia) qty.=01 no. (2) 3 mm poly carbonate glass (98.5 mm dia) with knurel knob, qty.=01 no. (3) spacer (teflon) for poly carbonate glass, qty.= 01 no. (4) 'o' ring for poly carbonate glass, qty.=01 no. (5) 12 mm poly carbonate glass (102 mm dia) qty.=01 no. (6) 3 mm poly carbonate glass (102 mm dia), qty.=01 no. (7) spacer (teflon) for poly carbonate glass, qty.=01 no. (8)'o' ring for poly carbonate glass, qty.=01 no. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

CTN :45050314

08 Jun, 2026 NA

Bokaro - Jharkhand

Tender For supply of pressure regulator assembly ckd make prv (model no. -w2000-10-m1) along with input-output bolt, inbuilt pressure gauge for m/s. aal make single bottle vcb type vcba-25.10tr. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variationpermitted: max 8 lacs ] ]

Diaphragm Sealed Gauge Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government