Latest diaphragm valve Tenders | Government diaphragm valve Tenders

Central Government And Public Sector

CTN :41210894

16 Aug, 2025 NA

Kaiga - Karnataka

Tender For supply of supply of diaphragm - epdm weir type 's' series open type suitable for 15 mm diaphragm valve , supply of diaphragm - epdm weir type 's' series close type suitable for 15 mm diaphragm valve , supply of diaphragm - epdm weir type 's' series open type suitable for 25 mm diaphragm valve , supply of diaphragm - epdm weir type 's' series close type suitable for 25 mm diaphragm valve

CTN :41220047

16 Aug, 2025 NA

Tuticorin - Tamil Nadu

Tender For supply of st020120417- diaphragm valve of size 65 mm , st020120416- diaphragm valve of size 150 mm

State Government

CTN :41234051

04 Aug, 2025 NA

Chaibasa - Jharkhand

Tender For quotation for rate of vt pump (raw water) and its accessories at saraswatipur rwss - supplying , installation and commissioning of single/multi stage vertical turbine pump sets (make: kirloskar /wpil/ mather & platt), rating-22kw/30hp approx as per is 1710, capable of discharging 94.56 m3/hr against a head of 50 m, consisting of bowl assemblies, bronze impellers, column assembly, stainless steel pump shaft, line shaft, etc. with all accessories coupled with squirrel cage induction motor confirming to is:325 and is:12615, having 20% more bhp than that of pump, operating on 1500rpm, 415v, 3 ph, 50 hz [make: kirloskar, jyoti, abb, cgl, bhel, jsl] all complete with required size of sluice valve and cidf non- return valve standard fitting, strainers, reducer, pressure gauge, etc. all complete job as per site requirement and direction of e/i. discharging -94.56 m3/hr and head - 50m (1w + 1s) 30 hp, cost towards making new foundation base for pump -motor set and panel including providing new ms base plate as per sample suitable for 30 hp pump- motor set, cutting and welding where necessary, nuts, bolts, flange etc with all labour, tools and materials all complete job for raw water vt pump set., cost towards jointing newly installed pump motor set to the existing header at raw water p/p., providing , erecting and commissioning lt motor control panel board fabricated with ms sheet and painted, dust-vermin proof. floor mounted cubical panel board shall be consisting of proper power distribution 160 a copper busbar- 4 pole, 1 no. 160 a mccb as incoming feeder and 2 nos. 100a mccb as outgoing feeders for motors, 1 no. 100 a mccb as spare feeder (for motor), 2 no. 32a mcb for lighting and other loads. including selector switches, switch disconnector isolator, voltmeters, ampere meters, mfm, indicator lamps, internal wiring, danger board, protection units & relay, capacitor banks/apfc and 02 nos suitable fasd starter, etc. all complete and as per is and direction of e/i ., supplying and erecting 16 sqmm 3 core xlpe / pvc insulated, 1100 v grade un-armoured copper cable with isi mark stranded / solid copper conductor complete erected on wall / panel or in provided trench in an approved manner. (from panel to motors)., providing and erecting chemical earthing with all required materials etc all complete., cost of 3t triple type chain pully block suitable as below with 6m lift complete with laoad chain and hand chain suitable for avove lift, tested 50% over load as per is 3832 carry isi etc. all complete job as per the site requirement and indian standard., cost towards dismantling of old pump set and foundation and making arrangements for removal of debries from the pump house.

State Government

CTN :41234052

04 Aug, 2025 NA

Chaibasa - Jharkhand

Tender For quotation for rate of items of vt pump (raw water) and accessories at gumuria rwss - supplying , installation and commissioning of single/multi stage vertical turbine pump sets (make: kirloskar /wpil/ mather & platt), rating-7.5 hp approx as per is 1710, capable of discharging 24.5 m3/hr against a head of 30 m, consisting of bowl assemblies, bronze impellers, column assembly, stainless steel pump shaft, line shaft, etc. with all accessories coupled with squirrel cage induction motor confirming to is:325 and is:12615, having 20% more bhp than that of pump, operating on 1500rpm, 415v, 3 ph, 50 hz [make: kirloskar, jyoti, abb, cgl, bhel, jsl] all complete with required size of sluice valve and cidf non- return valve standard fitting, strainers, foot valve, reducer, pressure gauge, etc. all complete job as per site requirement and direction of e/i. discharging -24.5 m3/hr and head - 30m (1w + 1s) 7.5 hp, cost towards making new foundation base for pump -motor set and panel including providing new ms base plate as per sample suitable for 7.5 hp pump- motor set, cutting and welding where necessary, nuts, bolts, flange etc with all labour, tools and materials all complete job., cost towards jointing newly installed pump motor set to the existing header., providing , erecting and commissioning lt motor control panel board fabricated with ms sheet and painted, dust-vermin proof. floor mounted cubical panel board shall be consisting of proper power distribution 100 a copper busbar- 4 pole, 1 no. 100 a mccb as incoming feeder and 2 nos. 63 a mccb as outgoing feeders for motors, 1 no. 63 a mccb as spare feeder (for motor), 2 no. 32a mcb for lighting and other loads. including selector switches, switch disconnector isolator, voltmeters, ampere meters, phase indicator lamps, internal wiring, danger board, protection units & relay, capacitor banks/apfc and 02 nos suitable fasd starter, etc. all complete and as per is and direction of e/i .), supplying and erecting 6 sqmm xlpe / pvc insulated, 1100 v grade un-armoured copper cable with isi mark stranded / solid copper conductor complete erected on wall / panel or in provided trench in an approved manner. (from panel to motors)., providing and erecting chemical earthing with all required materials etc all complete., cost of 3t triple type chain pully block suitable as below with 6m lift complete with laoad chain and hand chain suitable for avove lift, tested 50% over load as per is 3832 carry isi etc. all complete job as per the site requirement and indian standard., cost towards dismanteling of old pump set and foundation and making arrangements for removal of debries from the pump house.

State Government

CTN :41211505

18 Aug, 2025 1.35 Lacs

Multi City - Telangana

Tender For supply of veljan make complete servo cylinder assemblies for main control valve (mcv) and auxiliary control valve (acv) pertaining to drive turbine of model k1401-2 of tdbfp for 1x500mw unit.

Co-operative

CTN :41213818

05 Aug, 2025 NA

Farrukhabad - Uttar Pradesh

Tender For supply of rubber goods - item, shynthetic rubber bush for mill turbine. size- m-50, do -m-48, neoprene rubber seat for double beat valve as drg. no. m-209 a., neoprene rubber o ring for double beat valve as drg. no. m-209 b., neoprene rubber seat for double beat valve o.d.95 mm x 12.5mm thick, neoprene rubber seat for double beat valve o.d.160mm x bore 12 mm x 20 mm thick, neoprene rubber seat for double beat valve o.d.175 mm x 20 mm thick, neoprene rubber seat for juice weighing scale 320 mm dia x 195 mm bore x 30 mm thick, neoprene rubber seat for water weighing scale 495 mm dia x 40 mm thick, rubber air seal - 1", synthetic garlic packing size 1" square, synthetic garlic packing size 1/2" square, neoprene seat for pan discharge valve drg. m-12 & 12 a, synthetic rubber hose for vaccum filter size-2.25"x18", taper plug o.d. 30mm x 60mm length ,65 mm bore 12.5 mm, tapper plug size- 42x45, tapper plug size- 96 x 100, neoprene rubber diaphragm as per drg. m-26 b, synthentic rubber bucket 3" as per drg. m-18 b, synthentic rubber bucket 4" as per drg. m-18 a, rubber buffer drg. as per drg. m-52, six star coupling as per drg. m-etp-01, mill hydraulic bucket in synthetic rubber with canvas instructed drg. no. m-13, sugar grader coupling m-62, neoprene rubber diaphragm 6" sunder valve drg. m-95, rubber strip for molasses seprator of size " thick, 48 " i.d. x50-7/8 mm o.d., rubber diaphrgm valve sheet for diaphragm valve 80mm, rubber diaphrgm valve sheet for diaphragm valve 40mm, rubber bottom seal ring of continuous m/c. drg. cc m-102, synthetic rubber coupling bush size, bore-3/4" o.d.-1 " length- 1 ", bore-1/2" o.d.-1.3/4" length- 2", bore-1/2" o.d.-3/4" length- 2", bore-1/2" o.d.-1" length- 2", bore-1" o.d.-2" length- 2", bore-1/2" o.d.-1.1/2" length- 1", bore-1/2" o.d.-1.25" length- 1.25", bore-1" o.d.-1.3/4" length- 2", bore-1/2" o.d.-1/2" length- 1.25", bore-5/8" o.d.-1.1/2" length- 2", bore-1.1/8" o.d.-2.5" length- 3", bore-1" o.d.-2" length- 2.5", bore-1/2" o.d.-1.1/4" length- 1.5", bore-1/2" o.d.-1.5" length- 2", bore-3/4" o.d.-1.5" length- 2", bore-3/4" o.d.-1.25" length- 1.5", bore-3/4" o.d.-1.3/4" length- 2", bore-5/8" o.d.-1.25" length- 1.25", bore-25mm o.d.-45 mm length- 45 mm, bore-11 mm o.d.-20 mm length- 17 mm, rubber seat for pan discharge valve drg. m-164, rubber bush 75mm length x 65 mm od x 30 mm i.d., ruber sheet for double beat valve 190 mm dia x8mm thickness and 20 mm bore, neoprene round sheet 495 mm x 25 mm, neoprene round sheet 350 mm x 12.5 mm, neoprene round sheet 480 mm x 32 mm, neoprene round sheet 330 mm x 35 mm, rubber bush 30 mm x 18 mm bore x 30 mm thick, rubber bush 29 mm length x 15 mm bore x 31 mm thick, ruber sheet for double beat valve 95 mm dia x 12.5 mm thick, ruber sheet for double beat valve 160 mm dia x 12 mm bore x 20 mm thick, ruber sheet for double beat valve 175 mm dia x 20 mm thickness, rubber strip for vibroscreen as per sample, ruber sheet for double beat valve 160 mm dia x 12 mm bore x 20 mm thick, round rubber sheet size 180 mm o.d. x 10 mm bore x 6 mm thich

State Government

CTN :40997353

04 Aug, 2025 5.24 Lacs

Birsinghpur - Madhya Pradesh

Tender For corrigendum : procurement of various consumable items for dm plant-i and ii and tmd-i unit no. 1 and 2 at sgtps, and hydel power station mppgcl, birsinghpur. - spare neoprene rubber diaphragm reinforced with rayon fiber for bdk/pcv make diaphragm valves series s2 k type cast iron rubber lined valve of following sizes, 20 mm, 25 mm, 40 mm, 50 mm, 65 mm, 80 mm, 100 mm, 125 mm, 150 mm, 200 mm, neoprene rubber gasket specifications: a) specific gravity ; 1.3 +-0.05 b) hardness: 65+-5 sh a c) tensile strength : 85 kg/cm2 d) elongation: 500% e) compression set : 50% f) temperature range : -25 to +100 g) application : oil, water & chemicals , size -1000x2000x2 mm , size-1000x2000x3 mm, size-1000x2000x5 mm, compressed asbestos fiber jointing sheet style 54 super yellow/k100 non-metallic or equivelent make, size: 2000x1500x2.0mm, size: 2000x1500x3.0mm, rectaangular corrugated rubber gasket for condenser water box, neoprene square rubber cord 12x12mm, .

Central Government/Public Sector

CTN :41010995

04 Aug, 2025 NA

Ghaziabad - Uttar Pradesh

Tender For corrigendum : supply of supply of fine bubble diffuser and paint and microcatridge and carbon filters and diaphragm valve : : - 990010095274 10 inch carbon filter , 990220552003 diaphragm valve 150 mm , 990209545219 multicartridge filter housing , 990210719307 fine bubble diffuser , 572014020429 paint synthatic enamel sm-grey , 572014020817 paint synthatic enamel apple green , 572014021302 paint synthatic enamel p o-red , 572000900112 thinner nitrocellulose

Central Government And Public Sector

CTN :40644452

04 Aug, 2025 3.47 Lacs

Chittorgarh - Rajasthan

Tender For corrigendum : supply of bonnet assembly for 25mm nb s2k type diaphragm valve , bonnet assembly for 50mm nb s2k type diaphragm valve , bonnet assembly for 80mm nb s2k type diaphragm valve , diaphragm assembly for 25mm nb s2k type diaphragm valve , diaphragm assembly for 50mm nb s2k type diaphragm valve , diaphragm assembly for 80mm nb s2k type diaphragm valve , thrust bearing for 80mm nb s2k type diaphragm valve

CTN :41162994

04 Aug, 2025 NA

Khammam-T - Telangana

Tender For supply of suction and discharge valve assemblies of hoerbiger make for h2s gas reciprocating compressor tka 55 : : - discharge valve for stage 1a, 98rx, mat no 1273187 , suction valve for stage 1a, 98rx, mat no 1383614 , discharge valve for stage 1b, 79rlx, mat no 1383615 , suction valve for stage 1b, 79rlx, mat no 1383616 , discharge valve for stage ii, 88rx, mat no 1383617 , suction valve for stage ii, 88rx, mat no 1383618 , discharge valve for stage iii, 52rlx, mat no 1383619 , suction valve for stage iii, 52rlx, mat no 1383620

Diaphragm Valve Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors