Latest die set Tenders | Government die set Tenders

State Government

CTN :45655945

06 Jul, 2026 24.99 Lacs

Dapodi - Maharashtra

Tender For corrigendum : supply of handpump spare parts at pune zp - supply of handpump spare parts, die set 12mm with handle & bits, hydraulic vice 32 mm., heavy duty clamp 32 mm, heavy duty clamp 65 mm, connecting rod vice, pipe lifter spanner for 32mm n.b.pipe., pipe wrench 300 mm, pipe wrench 450 mm, pipe wrench 600 mm, pipe wrench 900 mm, double ended open jaw spanner 17 * 18 in c.v. steel, hacksaw frame, pump bucket (nitrile) for deepwell hand pump(is: 15500 part 7), sealing ring for deepwell handpumps (is: 15500 part 7), hex nut with bolt m 12 * 40, handle axle along with nut & washer for deepwell hand pump (is: 15500 part 4), single side shielded bearing confiming to is: 15500 part 4 suitable for above handpumps, chain nut with bolt m-12x40 (is: 15500 part 4), chain with coupling for deep well hand pump, head for deepwell hand pump (is: 15500 part 4), third plate suitable for deepwell hand pump (is: 15500 part 4) (im-ll), water tank for deepwell hand pump (is: 15500 part 4) (im-ll), connecting nrod of 12 mm dia. x 3 mtr. length, i.s.i.marked galvanized steel tubes as per i:s 1239 ( part-1) /2004 amdt.1 to 4 scrwed at both ends as per i:s 554/1999 ( reaffirmed 2004) . one end socketed with isi marked socket as per is:1239 ( part -ii)/1992 ( reaffirmed 2003) and other end protected with plastic thread protector medium class , bore size (nominal)diameter 32 mm , length 3 meter, cylinder assembly i.m.ii, cylinder body with brass liner for deepwell hand pump (is: 15500 part 5), reducer cap for deepwell hand pump (is: 15500 part 5) (im-ll), upper valve along with rubber seat for deepwell hand pump (is: 15500 part 6) (im-ll), upper valve assly suitable for deep well hand pump (im-ll) (is: 15500 part 6) (im-ll), lower valve assembly i.m.ii, hacksaw blade (high speed steel), spacer g.m. i.m.ii, rubber seat lower valve (im-ll), rubber seat upper valve (im-ll)

State Government

CTN :45715629

14 Jul, 2026 NA

Pithoragarh - Uttarakhand

Tender For supply of 35 mm monolayer blown film plant 20inch roller size with 4 inch die , 2 inch bottom cutting sealing machine servo base double decker , handle punching machine w u d cut punch die set 5 pcs , 2hp air compressor , online stamp printer 5 inch , 5tr cooling tower , 10 hp granule mixture , pbat per kg 500 , filler per kg 180 , single die dona pattal manufacturing machine with 12inch three compartment plate die , raw material dona pattal plates

CTN :45303123

07 Jul, 2026 NA

Ajmer - Rajasthan

Tender For corrigendum : tender for supply of machinery fastners : -comp spring c7 0 41x6h14x20 , dust cover sy rubber , hose 100r3 10x300 , spl spring 27 c7 , comp spring , comp spring , comp spring h0002131 , comp spring , comp spring 27 c7 , hex soc set screw flat point m8x16 , stud b m6x85 , stud b m10x25 , sl ch hd scr m3x18 , sl ch hd scr m6x16 blackened , hex screw m8x16 , hex nut a m12 soft , hex nut m16 soft , hex nut m14 hard hex face surface hard , ring nut a m14x1 , lock nut m65x2 , machined washer 8 4 , hard washer m14 , spring washer b 8 , c1rclip ext a 4mm , int circlip b 120 , pin sr dia6x10 , thd taper pin dia 8x50 , filister hd rive dia 2 1 , taper handle e14xm10 , ball grip d 28 , eyeletpeg m6x25 , steel ball 7 by32 inch , steel ball 1 by4 inch grade v , plastic hose 1 by2 inch , hose 100r3 6x2000 , red elbow 1inch x1 by2 , stopper a bsp1 by4 inch , cyl plug dia4 , union g 1 by4 inch , taper male stud elbow coupling bsp ex18l , through cock bsp 1 by2 inch , through cock bsp 3 by4 inch , washer 16x22x2 , washer 21x27x2 , packing cu asb 22x30x2

CTN :45726059

31 Jul, 2026 25.00 Lacs

Tikamgarh - Madhya Pradesh

Tender For inviting rates of handpump repair material for financial year 2026-27 at nagar palika parishad tikamgarh - inviting rates of handpump repair material for financial year 2026-27, head assembly with handle complete (as per isi), head assembly without handle (as per isi), handle assembly complete (as per isi), water tank assembly (as per isi), stand assembly (as per isi), third plate (as per isi), g.i. riger pipe 32 m.m. isi medium b class (3 meter), g.i. riger pipe 32 m.m. isi haevy c class (3 meters), chain with cupling (as per isi), 32 mm g.i. pipe socket (as per isi), 12 mm connecting rod (as per isi) (3 meter), 12 mm connecting rod socket (as per isi), ci cylinder body only (as per isi), ci cylinder assembly with brass asseseries complete, plunger rod for cylinder, upper valve assembly complete brass (as per isi), lower valve assembly complete brass (as per isi), rubber seeting for upper valve (as per isi), rubber seeting for lower valve (as per isi), valve guide (as per isi), spacer (as per isi), brass sleep (as per isi), rubber washer (as per isi), seeling ring (cap packing) of nitric rubber (as per isi), ci reducer cap (as per isi), nut bolt for handpump (as per isi), chain nut bolt tvs (as per isi), bolt for cover (as per isi), spacer for rubber washer (as per isi), pipe lifter for 32 mm (as per isi), pipe wise 3 no. size (as per isi), pipe wise 2 no. size (as per isi), hand pump rod die set (as per isi), pipe die set 32 mm, 32 mm dia u.p.v.c. riser pipe, 32 mm c.i. adopter set for u.p.v.c. pipe, 12 " pipe wrentch (taparia/j.k./ ambika), 14 " pipe wrentch (taparia/j.k./ ambika), 18 " pipe wrentch (taparia/j.k./ ambika), 24 " pipe wrentch (taparia/j.k./ ambika), 36" pipe wrentch (taparia/j.k./ ambika), 16x17 ring spainer, 18x19 fix spainer, screw wrentch (taparia), 6204 bearing, distance piece, hexa blade, hexa frame, pipe tools, 2 tonnes chain block, 3 tonnes chain block, 5 tonnes chain block, handle axle

CTN :45704947

16 Jul, 2026 NA

Tezpur - Assam

Tender For supply of plumbing items c c - 40 mm , extension nipple-cp 15 mm x 50 mm , extension nipple-cp 15 mm x 80 mm , ro flexible white pipe one fourth inch , ro flexible white pipe three eighth inch , ro flexible blue pipe one fourth inch , ro flexible blue pipe three eighth inch , ro on off inlet valve one fourth inch , ro push fit tee one fourth inch , ro straight connector one fourth inch x one fourth inch , ro elbow connector one fourth inch x one fourth inch , ro brass diverter valve one fourth inch x three eighth inch , ro tap adaptable for kent , round knob cp angle valve 15 mm , swr equal bend 45degree 40 mm , swr equal bend 45degree 50 mm , swr equal bend 45degree 63 mm , swr equal bend 45degree 75 mm , swr equal elbow 40 mm , swr equal elbow 50 mm , swr equal elbow 63 mm , swr equal elbow 75 mm , swr equal tee 40 mm , swr equal tee 50 mm , swr equal tee 63 mm , swr equal tee 75 mm , swr pipe type a solfit type 40 mm , swr socket 40 mm , swr socket 50 mm , swr socket 63 mm , swr socket 75 mm , swr socket 90 mm , swr socket 110 mm , swr end cap 40 mm , swr end cap 50 mm , swr end cap 63 mm , swr end cap 75 mm , swr end cap 90 mm , swr end cap 110 mm , swr reducing bush 50 mm x 40 mm , swr reducer coupler 63 mm x 50 mm , swr reducer coupler 75 mm x 50 mm , swr reducer coupler 75 mm x 63 mm , swr reducer coupler 110 mm x 75 mm , sink coupling 100 mm , sink coupling 80 mm , pvc solvent 50 ml , pvc fta 50 mm , upvc coupler sch 80 40 mm , upvc coupler sch 80 32 mm , upvc coupler sch 80 25 mm , upvc pipe 32 mm , upvc reducer coupler sch 80 32 mm to 25 mm , upvc reducer coupler sch 80 40 mm to 25 mm , upvc reducer coupler sch 80 40 mm to 32 mm , upvc fta 25 mm , upvc fta 32 mm , upvc fta 40 mm , upvc mta 25 mm , upvc mta 32 mm , upvc mta 40 mm , upvc clear medium solvent cement 59 ml tube , upvc union 20 mm , upvc union 25 mm , upvc union 32 mm , upvc union 40 mm , cp basin pillar cock 15 mm long body , ceramic urinal partition 90 x 320 x 720 mm , conventional wc s type , curved jaw locking plier 250 mm length , exposed plastic cistern flush tank 10 ltrs , gland packing 12 mm thickness , gland packing 10 mm thickness , gi hex head self drilling screw 2 inch , hackshaw blade half inch x 1 feet long , health faucet 1 meter hose , bottle trap with chrome plating , m seal 90 gm packet , pvc gitti 75 mm , rack bolts 4inch , screw 3inch , screw extractor range 3 mm to 22 mm , thread seal teflon tape 12 mm width 8 mtr , wc seat cover polypropylene , white portland cement 1 kg bag , waste coupling short full thread , waste coupling long aluminum strip for saddling of pipes; (14 mm wide, 0.25 mm thick), air release ball hard plastic coated; 76 mm dia., clinical faucet; bib cock long body with wall flange and 200 mm lever handle, connection pipe (size 24 inch), cpvc brass elbow 90 (20 mm x 15 mm size), cpvc brass elbow 90 (20 mm x 20 mm size), cpvc coupler/socket (size 15 mm), cpvc coupler/socket (size 32 mm), cpvc coupler/socket (size 40 mm), cpvc coupler/socket (size 50 mm), cpvc elbow 90 (20 mm size), cpvc elbow 90 (25 mm size), cpvc elbow 90 (32 mm size), cpvc elbow 90 (40 mm size), cpvc elbow 90 (50 mm size), cpvc end cap (size 25 mm), cpvc end cap (size 32 mm), cpvc end cap (size 40 mm), cpvc female adapter plastic threaded (size 25 mm), cpvc female adapter plastic threaded (size 32 mm), cpvc female adapter plastic threaded (size 40 mm), cpvc male adapter plastic threaded (size 32 mm), cpvc male adapter brass threaded (size 20 mm), cpvc male adapter brass //bid details 2 / 104

CTN :45704153

16 Jul, 2026 10.00 Lacs

Bathinda - Punjab

Tender For supply of gate bell value 20mm dia , gi nipple 20 mm dia x 150 mm long , gi flange 50 mm 2 inch with nut and bolt with washer , gl reducer 3x2 inches , gl nipple 25 mm dia x 150 mm long , gl bend 50 mm , gl nipple 80 mm dia x 160 mm long , gl union 80 mm dia , gl gate valve 80 mm , hose clamp 25 mm , gi clamp 25 mm , rubber gasket , die set large , gi socket 50 mm dia , pvc connector 75 mm dia , brass nozzle gate value 25 mm dia with on off system , coagulant chemical , chlorination chemical , tds meter isi market , alum fitkri , bleaching powder , teflon tape , gi pipe 80 mm dia 5 ft long with ms flange , gi pipe 80 mm dia 10 ft long with ms flange , gate value 80 mm , gi nipple 25 mm dia x 150 mm long , tank nipple 80 mm dia , armed hose 75 mm dia , pvc high pressure pipe 32 mm dia 4 ft long , hdpe water jerry cane 30 ltr , pvc suction hose 75 mm dia 10 mtr long , pvc water tank 5000 ltr , foot value brass 75 mm dia , nozzle brass 25 mm dia , nylon rope 12 mm , tds meter isi marked , heavy duty pipe wrench , gi end plug 75 mm , teflon tape , cotton thread , hdpe water tank 500 ltr , led bulb 18 watt , led bulb 11 watt , waste pipe whb , acp sheet , jack , tyre with tube 7.50 16 tf , 18 watt led , 11 watt led , fan belt , fuel flexi pipe , fuel filter , oil filter , air filter , injector over flow pipe , mcb 63 amp 4 pole , ignition switch , avr , alternator 12 kva , iron fuel line for injector , oil filter kirolsker , filter fuel pre universal type 1 ltr , feed switch , diesel tank led , solo night switch , fuel flexible pipe 1 mtr long , change over switch 100 amp offload , flexible wire 90 mtr roll , armed wire 1.5 sqmm sc , self starter 12 volt , filter 0.5 ltr , opti micron filter cartridge size 20 micron for ro , carbon media filter , micro carbon filter 20 x 4 inches , pressure sand filter 14 x 65 inches //bid details 2 / 68

CTN :45714610

08 Jul, 2026 NA

Cachar - Assam

Tender For supply of galvanized steel sheets (plain and corrugated) (v2) as per is 277 (q2) , nails and screw size 2 inch , false tceiling complete set , ceramic floor tiles 600 mm x 600 mm , matt ceramic floor tiles 600 mm x 600 mm , non skid ceramic floor tiles 300 mm x 300 mm , glazed ceramic wall tiles 304 mm x 457 mm , wall putty , primer , distemper , red oxide paint , upvc pipe 25 mm dia 6 mtr , 15 mm piller cock , kitchen sink , hand wash basin complete set , bib cock , wc indian type with flushing system , wc european type flushing system , gate valve 1 inch , plain socket 1 oblique 2 inch , nipple 1 oblique 2 inch , pvc solution , m seal , tower ring , pvc elbow 1 inch , pvc tee 1 inch , pvc socket 1 inch , pvc union 1 inch , pvc plug 1 oblique 2 inch , upvc nipple 1 oblique 2 inch x 2 inch , nahani trap , pvc p trap 4 inch , pvc pipe 3 inch 6 mtr long , pvc pipe 4 inch 6 mtr long , upvc plain tee 4 inch , upvc nipple 1 inch , pvc wire 1 pt 5 sqm 90 mtr roll , ceiling fan , switch board 4 x4 with socket , security light , led bulb 09 w , tube light 40 w led , insulation tap 6 mtr roll , btc wire 10 sqm , switch board 4 x7 , pvc wire 2.5 sqm 90 mtr roll , pvc wire 4.0 sqm 90 mtr roll , mcb 16 amp with box , mcb 32 amp , mcb 32 amp box 02 way , ceiling rose , angle holder , fan regulator , 2 inch screw , led bulb 15 w , casing caping , 16 amp switch , 16 amp socket , 06 amp socket and switch , pvc door complete set 6 p 5 ft x 2 ft with all accesseries , aluminium window 3 pt 5 x 4 feet with all accesseries , white cement , copper wire 1 pt 5 sqm , switch 6 amp , led light 18 w , exaust fan plastic , combined switch socket 16 amp , led tube light 22 w , led light 9 w , 3 pin electrical plug 5 amp , 2.5 sqm copper wire , connecting pipe for wash basin and kitchen sink , wash basin and kitchen sink coupling , bib cock ss for kitchen sink , bib cock ss for wash basin , angle cock ss , sink cover ss , mirror washroom , looking mirror , mirror for rooms , 10 feet upvc pipe 3 oblique 4 inch , upvc t socket 1 oblique 2 inch , upvc elbow 1 oblique 2 inch , cpvc elbow 3 oblique 4 inch , 4 inch pvc pipe septic tank , 4 inch pvc bend , union socket 1 oblique 2 inch , sintax 1000 ltrs capacity , towel hanger for bathroom ss , toilet flushing cistem , prepainted cgi sheet 10 feet x 3 feet , ac sheet 4 feet x 4 feet , pvc socket 25 mm , pvc union 25 mm , wc p trap 4 inch , switch board 4 x 4 , 16 amp socket combined , hard wood doors with frame with all accesseries , 16 amp combined switch and socket , pvc waste pipe for wash basin and kitchen , mcb box pvc , gi binding wire 8 swg lasgubg wire , binding wire 22 swg black //bid details 2 / 81

CTN :45671410

07 Jul, 2026 NA

Ferozepur - Punjab

Tender For material and labour for construction of 06 x toilet cum bathing cubicle (4/4) in ferozepur - toilet cum bathing cubicle structure with pre-fab colns, purlins, rafters, wall (gi metal skinned puf panels), ppgi roof. pvc door (08 nos) of size 750 x 2100 mm and aluminum ventilator (08 nos) of size 450 x 450 mm, including all necessary fixing arrangement and fittings accessories as per tech specification and drawing att., well burnt common building bricks of sub class b of size 23 x 11.5 x 7.5 cm conforning to is: 2212-1991, opc (43grade) confirming to is 8112 in 50 kgs hdpe bags (make -ultratech/ ambuja/acc), 20mm graded stone aggregate (crushed) conforming to is-383 1970. they shall be clean, hard, tough, durable and of uniform quality throughout. the aggregate shall be free from soft disintegrated materials, vegetable and other organic impurities., 40mm graded stone aggregate (crushed) conforming to is-383 1970., they shall be clean, hard, tough, durable and of uniform quality throughout. the aggregate shall be free from soft disintegrated materials, vegetable and other organic impurities., interlocking tiles of size (200 x 120 x 60 mm thick gde m-35) i section of best quality., fine sand shall be clean, free from adhesive coating and shall not contain clay, mica and other impurities. the maximum quantities of clay and fine silt in sand shall not be more than 5% by mass as per is-383-1970., hard core stone aggregate 50-63 mm size., non skid ceramic floor tiles of size 400 x 400 x 7 to 8 mm thick. they shall be abrasion resistant conforming to is-15622, make: johnson/ kajaria/somany, looking mirror size 600x450mm of best quality aluminium frame and brass screw and washer for fixing with wall panel. make: modi guard /saint goban, white cement. make:- jk/ birla, water proofing compound, cement based paint for external wall. make:- shalimer/ asain/ berger, welding rod, oil bound distemper (off white) make: shalimer/asain/ berger, sand paper, turpentine oil, painting brush 4"., painting brush 2"., red oxide primer. make:- berger / shalimar / asian, paint synthetic enamel black colour. make:- berger / shalimar / asian, ms flat 35 x 3 mm, cp soap dish 125 mm. make: - hindustan/ jaguar/ sona/ prayag, angle iron staging of size 1.5 x 1.5 x 2.5 m with vertical ms angle columns of size 50 x 50 x 6 mm with 3mm thick ms sheet fitted at top of the staging work as shown in drg along with connecting accessories make: jindal/tata/sail/rinl, 1.25 mm thick ms sheet manhole cover of size 600 x 600 mm, incl ms handle of size 25 x 5 mm, with angle iron 40 x 40 x 5 mm all around and cross bracings. make: jindal/tata/sail/rinl, soakage pit cover of size 2.56x1.56m with angle iron 50 x 50 x 5 mm with all around and cross bracing and 1.25mm thick ms sheet including 600 x 600 mm suiteble opening cover with handle, septic tank cover of size 2.0 x 1.22m with angle iron 50 x 50 x 5 mm with all around and cross bracing and 1.25mm thick ms sheet, rotational moulded high density polyethylene water storage tank (cylinderical vertical tank) of 1000 ltrs capacity as per is 12701 of 1996 along with 20 mm dia brass valve with pvc float ball. make: - sintex/ polycon/ hindustan, gi socket 15 mm, isi marked. make: jindal/tata/sail/rinl, gi elbow 15 mm, isi marked. make: jindal/tata/sail/rinl, gi tee 15 mm, isi marked. make: jindal/tata/sail/rinl, gi union 15 mm, isi marked. make: jindal/tata/sail/rinl, cp bib cock 15 mm dia long body isi marked. make: - jaguar/ onida/hindware, gl pipe 15 mm dia, isi marked, make: jindal/tata/sail/rinl, gi nipple 15 mm 3" long, isi marked, make: jindal/tata/sail/rinl, gi plug 15 mm, isi marked, make: jindal/tata/sail/rinl, 15 mm dia pvc connection pipes, isi marked, gi socket reducer 20-15 mm, isi marked, make: -jindal/tata/sail/rinl, gi pipe 20 mm dia med grade, isi marked, make: -jindal/tata/sail/rinl, gi socket 20mm, isi marked, make: - tata/ jindal/ ravindra, gi elbow 20 mm, isi marked, make: jindal/tata/sail/rinl, gi tee 20 mm, is

Central Government / Public Sector

CTN :45527295

03 Jul, 2026 NA

Haldia - West Bengal

Tender For corrigendum : supply of 9040m26e28 depth gauge micrometer, make mitutyo 0-300mm , vernier depth gauge 0-300mm , vernier depth gauge 0-150mm,resolution 0.01mm base dim- 100 x 16mm , filler gauge,set,300mm,long , digital vernier caliper 0-300 mm, make mitutoyo , digital vernier caliper 0-150 mm, make mitutoyo , micrometer,outside,digital,0 - 150mm , digimatic outside micrometer 340-102, 150-300mm make mitutoyo , stand, dial, magnetic type 7010 , micrometer,depth gauge,0-300mm,resolution 0.001mm base dim- 101.6 x 16mm , compl. bearing puller kit , plier,vice grip , 40 piece tool set - taps, dies set

State Government

CTN :45675988

02 Jul, 2026 34.13 Lacs

Bengaluru - Karnataka

Tender For annual maintenance & supply of materials, repairs to windows and doors, supply of water & sanitary fittings to c & d type, varada block & arkaavathi block, koramangala, bengaluru from august-2026 to july-2027- item description: cleaning of water storage tank or sump by following method: (1) empty the tank/ sump and make it to near dry, (2) apply bleaching powder uniformally (@ tank capacity x 0.5 gms/litre) inside the tank/ sump and wait for one hour, (3) after one hour, clean/ rinse the tank/ sump with fresh water. repeat the process (2) & (3) for two to three times, all complete, as directed by the engineer-in-charge. , item description: cleaning of under ground sump, over head r.c.c. tank ( independent staging) including disposal of slit and rubbish, all as per direction of engineer-in-charge. the cleaning shall consist following operations:- tank shall be emptied of water by pumping & bottom shall be cleaned of silt and other deposits. entire surface area of the sump shall then scrubbed thoroughly with wire brush etc. and pressure washed with water. chlorination of rcc internal surface by liquid chlorine. the treated surface shall be dried using air jetting and all loose particles shall be removal from the surface. finally the surface shall be treated with ultraviolet radiation etc. as per direction of engineer-in-charge. , item description: external sweeping and terrace cleaning - cleaning of outer periphery like roads footpaths curb stones terrace including removing grass dust etc., to the nearest garbage pit using suitable coconut broomstic,bombay broomstick, squezers /wipers /rubberbru , item description: providing and fixing chlorinated polyvinyl chloride (cpvc) pipes, having thermal stability for hot & cold water supply, including all cpvc plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes & fittings with one step cpvc solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of engineer in charge. concealed work, including cutting chases and making good the walls etc. - 20 mm nominal dia pipes , item description: providing pvc ringtite pipes conforming to is 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of pvc pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per iss (contractor will make his own arrangements for procuring water for testing) etc. complete for: pvc pipes 110mm dia., 6 kg/sqcm & class 3 , item description: providing and fixing chlorinated polyvinyl chloride (cpvc) pipes, having thermal stability for hot & cold water supply, including all cpvc plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes & fittings with one step cpvc solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of engineer in charge. concealed work, including cutting chases and making good the walls etc. - 25 mm nominal dia pipes , item description: providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : rectangular shape 453x357 mm , item description: providing and fixing brass stop cock of approved quality : 15 mm nominal bore , item description: providing and fixing unpl

Die Set Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

Central Government / Public Sector

State Government