Latest diesel engine pump Tenders | Government diesel engine pump Tenders

Central Government/Public Sector

CTN :45586819

20 Jun, 2026 NA

Barmer - Rajasthan

Tender For providing of repair, maintenance, and installation of plant/ systems/equipments (version 2) - rewinding of desert cooler & motor grass pad desert cooler water pump 40 watt water pump 18 watt

State Government

CTN :45596388

23 Jun, 2026 NA

Delhi - Delhi

Tender For supply, installation, testing and commissioning of electrical and mechanical equipments for shallow bore tube wells phatak bans,sawar khan, chatta mom gran, lal darwaza in matia mahal constituency ac-21. - s/o submersible pump set fitted with dynamically balanced ep impeller mounted on stainless steel shaft protection sleeve ep stage bowl of closed grained shorted type impeller. the pump will be directly coupled to required wet type induction motor of speed 2900 rpm suitable for operation on three phase ac, 415 volts ,50hz, 5 hp, model no j46, head-70 mtrs, discharge-200 lpm. make:bs/ksb/crompton/djb approved, supply of automatic lt panel board suitable for 415 volts, 3 phase, 50 hz, 4 wire system for operation of up to 15 hp submersible set, made out of not less than 2 mm thick crca for load bearing members and 1.6 mm for doors of panel, totally enclosed, dust and vermin proof, floor mounted type. the panel size 760 mmx 1360 mm x300 mm and having (1) 63 amp change over- 1 no (2) 63 a tpn mccb -1 no (3) amp meter 0-50 a- 1 no (4) voltmeter 1 no (5) amp & volt meter selector switches-1 set (6) auto-manual + light + control mcb tp 32 amp- 1nos each (7) ct -3nos (8) push button + on/off light 2 nos each (9) 5 kvar shunt capacitor- 1 no (10) aluminium bus bar size 25 mm x 6 mm - 1set (11) 15 hp star delta starter (a) 32 amp power contactor-3 nos (b) overload relay 14-23 a -1 no (c) star delta timer- 1 no ( d) qt timer -24 hours -1 no (e) motor protection relay 200 short circuit, earth fault, phase loss, unbalance, phase reversal, locked rotor protection make:-subtec/protech/ l&t/all djb approved make, s/o pvc insulated flat submersible cable with copper conductor having three core size 2.5 sq mm 1100 volts(100mtr per roll). make- gloster/universal/havells/grandlay/djb approved, s/o g.i pipe 40mm dia medium class with threaded externally on both end socketed 6mtr long. make- jindal/tata., s/o g.i tail piece 40mm dia 600mm long medium class with threaded externally on both end. make- tata/jindal, s/o gi socket 40 mm dia with threaded internally. make: jindal/tata/djb approved, s/o gi elbow with both end having thread, size- 40mm. make: jindal/tata/djb approved, s/o gi reducer having thread on boyh end, size: 50mm to 40mm. make: jindal/tata/djb approved, s/o gi union having thread on both end, size: 40mm. make: jindal/tata/djb approved, s/o ms clamp of 600mm long 12mm thick complete with nut & bolts and washers for holding 40 mm dia pipe i/c bending & shaping etc., supply of ms bore cover 6 mm thick suitable for 100 mm dia casing in 2 pieces complete with bolting arrangement angle iron frame and provision of 40 mm dia hole in the center., supply of pvc suction hose pipe 50 mm dia 30 mtr long.make-jyoti/isi, installation of submersible pump set with pipe and other accessories, connection of cable, installation of electric panel, grouting of electric panel digging and fixing the same with the help of cc and laying of gi pipe from bore to panel executing minor civil making electrical connection with cable as required size i/c watch and ward cartage, taking all safety measures all tools and tackles. testing and commissioning of all e&m equipment on no load and full load conditions as per standard and full satisfaction of engineer-in- charge. this is a turnkey job and it further includes any left out items which may be required during execution of work will be firm responsibility & no extra payment will be paid. - s/o submersible pump set fitted with dynamically balanced ep impeller mounted on stainless steel shaft protection sleeve ep stage bowl of closed grained shorted type impeller. the pump will be directly coupled to required wet type induction motor of speed 2900 rpm suitable for operation on three phase ac, 415 volts ,50hz, 5 hp, model no j46, head-70 mtrs, discharge-200 lpm. make:bs/ksb/crompton/djb approved, supply of automatic lt panel board suitable for 415 volts, 3 phase, 50 hz, 4 wire system for opera

State Government

CTN :45608057

23 Jun, 2026 1.67 Lacs

Thanesar - Haryana

Tender For a mtc of ephs in sector 8 ue kurukshetra repair of 2hp sewerage motor pump ms pipe mccb at various tubewell complete all respect and all other works contingent thereto

Central Government/Public Sector

CTN :45610327

13 Jul, 2026 NA

Chennai - Tamil Nadu

Tender For supply of self-priming mono block pump assembly with controller to rcf specification no.edts-186, rev.a, am-l & 2, corr.1 & 2, annexure-1.the drg. no. cc71325, alt''c'' for pump mounting frame where ever mentioned in the specification/ drawing shall be read as icf/sk3-7-1-089 alt-c or latest. in drawing cc71327 alt-c, note-7 shall be read as #cable entry hole of the motor terminal box shall be covered with blank plug of m20#. packing instruction pi 146, ver 2.0. [ warranty period: 30 months after the date of delivery ] ]

corporations/Associations/Others

CTN :45597725

26 Jun, 2026 NA

Surat - Gujarat

Tender For supply, fit and commission 15 hp capacity monoblock motor (including pump) no. 2 (killerloskar make) installed for filtration in the plant room at dunbhal swimming pool in south east zone (limbayat) and make new foundation structure (with base plate) and buy back old installed monoblock motor (including pump)

State Government

CTN :45586306

22 Jun, 2026 NA

Katol - Maharashtra

Tender For supply of electrical and water supply material for gp paradsinga foryear 2026-27 3rd call - materiyal list water and electric, pvc pipe 4kg 63 mm, pvc pipe 4kg 75 mm, pvc pipe 4kg 90 mm, pvc pipe 4kg 110 mm, pvc pipe 4kg 140 mm, pvc pipe 4kg 160 mm, pvc pipe 6kg 63 mm, pvc pipe 6kg 75 mm, pvc pipe 6kg 90 mm, pvc pipe 6kg 110 mm, pvc pipe 6kg 140 mm, pvc pipe 6kg 160 mm, pvc pipe 10kg 63 mm, pvc pipe 10kg 75 mm, pvc pipe 10kg 90 mm, pvc pipe 10kg 110 mm, pvc pipe 10kg 140 mm, pvc pipe 10kg 160 mm, bleaching powder 25 kg bag, gi pipe 1/2", gi pipe 3/4", gi pipe 1", gi pipe 2", gi pipe 2 1/2", gi pip 3", gi pipe 4", pvc cappling 4kg 1/2", pvc cappling 4kg 3/4", pvc cappling 4kg 1", pvc cappling 4kg 2", pvc cappling 4kg 2 1/2", pvc cappling 4kg 3", pvc cappling 4kg 4", pvc cappling 4kg 5", pvc cappling 4kg 6", pvc cappling 6kg 1/2", pvc cappling 6kg 3/4", pvc cappling 6kg 1", pvc cappling 6kg 2", pvc cappling 6kg 2 1/2", pvc cappling 6kg 3", pvc cappling 6kg 4", pvc cappling 6kg 5", pvc cappling 6kg 6", pvc cappling 10kg 4", pvc cappling 10kg 5", pvc cappling 10kg 6", gi cappling 1/2", gi cappling 3/4", gi cappling 1", gi cappling 2", gi cappling 2 1/2", gi cappling 3", gi cappling 4", pvc elbo 6kg 1/2", pvc elbo 6kg 3/4", pvc elbo 6kg 1", pvc elbo 6kg 2", pvc elbo 6kg 2.5", pvc elbo 6kg 3", pvc elbo 6kg 4", pvc elbo 6kg 5", pvc elbo 6kg 6", gi bend 1/2", gi bend 1", gi bend 2", gi bend 2.5", gi bend 3", gi bend 4", gi bend 3/4", pvc bend 4kg 5", pvc bend 4kg 6", pvc bend 4kg 1/2", pvc bend 4kg 3/4", pvc bend 4kg 1", pvc bend 4kg 2", pvc bend 4kg 2 1/2", pvc bend 4kg 3", pvc bend 4kg 4", pvc bend 6kg 2 1/2", pvc bend 6kg 3", pvc bend 6kg 4", pvc bend 6kg 5", pvc bend 6kg 6", pvc tee 4kg 1/2", pvc tee 4kg 3/4", pvc tee 4kg 1", pvc tee 4kg 2", pvc tee 4kg 2.5", pvc tee 4kg 3", pvc tee 4kg 4", pvc tee 4kg 5", pvc tee 4kg 6", pvc tee 6kg 2.5", pvc tee 6kg 3", pvc tee 6kg 4", pvc tee 6kg 5", pvc tee 6kg 6", gi tee 1/2", gi tee 3/4", gi tee 1", gi tee 2", gi tee 2.5", gi tee 3", gi tee 4", pvc end cap 1/2", pvc end cap 3/4", pvc end cap 1", pvc end cap 2", pvc end cap 2.5", pvc end cap 3", pvc end cap 4", pvc end cap 5", pvc end cap 6", gi end cap 1/2", gi end cap 3/4", gi end cap 1", gi end cap 2", gi end cap 2.5", gi end cap 3", gi end cap 4", pvc mta 1/2", pvc mta 3/4", pvc mta 1", pvc mta 2", pvc mta 2.5", pvc mta 3", pvc mta 4", pvc mta 5", pvc mta 6", pvc pta 1/2", pvc pta 3/4", pvc pta 1", pvc pta 2", pvc pta 2.5", pvc pta 3", pvc pta 4", pvc pta 5", pvc pta 6", saidal piece 2"x1/2", saidal piece 2.5"x1/2", saidal piece 3"x1/2", saidal piece 4"x1/2", saidal piece 5"x1/2", saidal piece 6"x1/2", saidal piece 2"x3/4", saidal piece 2.5"x3/4", saidalpiece 3"x3/4", saidal piece 4"x3/4", saidal piece 5"x3/4", saidal piece 6"x3/4", gi sulisevalue 2", gi sulisevalue 2 1/2", gi sulisevalue 3", gi sulisevalue 4", gi sulisevalue 5", gi sulisevalue 6", flang gi 2", flang gi 2 1/2", flang gi 3", flang gi 4", flang gi 5", flang gi 6", air value 2", air value 2.5", air value 3 ", air value 4 ", air value 5 ", air value 6", pvc reducer 1/2" x 3/4", pvc reducer 3/4" x 1", pvc reducer 2" x 2 1/2", pvc reducer 2 1/2" x 3", pvc reducer 3" x 4", pvc reducer 4" x 5", pvc reducer 5" x 6", gi reducer 1/2" x 3/4", gi reducer 3/4" x 1", gi reducer 2" x 2 1/2", gi reducer 2 1/2" x 3", gi reducer 3" x 4", gi reducer 4" x 5", gi reducer 5" x 6", p.v.c. valve 2", p.v.c. valve 2 1/2", p.v.c. valve 3", p.v.c. valve 4", open well submarsible pump 10 hp, open well submarsible pump 7.5 hp, open well submarsible pump 5 hp, open well submarsible pump 3 hp, bore well submarsible pump 3 hp, bore well submarsible pump 10 hp, bore well submarsible pump 7.5 hp, bore well submarsible pump 7.5 hp, bore well submarsible pump 12.5 hp, bore well submarsible pump 15 hp, starter ltlk 5 hp, starter ltlk 15 hp, starter ltlk 7.5 hp, ltlk star delta motor starter 10 hp, ltlk star delta motor starter 12.5 hp, cable submersible 2.5 mm copper, cable submersible 4 mm copper, cable subme

State Government

CTN :45599689

21 Jun, 2026 NA

Rohtak - Haryana

Tender For rohtak town annual maintenance works for water supply - repair of 40 hp horizontal pump including making of heavy duty sleeve making bronze chuck nut, p & f bearing, no. 6309-2rsi/c3 s.k.f with bearing seat with brass welding , greasing, glain dori, opening & refitting,loading,unloading,carriage complete job /repair of pump fitted with 40 hp horizontal motor / ex-post facto sanction for repair of 40hp pump set at chamber no.3 of 2nd water works rohtak

State Government

CTN :45599694

21 Jun, 2026 NA

Rohtak - Haryana

Tender For rohtak town annual maintenance works for water supply - repair of 30 hp horizontal pump including rematling on pump shaft making bearing impeller seat & threading including making of heavy duty sleeve making bronze chuck nut, with heavy bearing seat with brass welding , greasing, glain dori, opening & refitting,loading,unloading,carriage complete job /repair of pump fitted with 30 hp horizontal motor / at jln canal for 2nd water works. rohtak

State Government

CTN :45599696

21 Jun, 2026 NA

Rohtak - Haryana

Tender For rohtak town annual maintenance works for water supply - repair of 40 hp horizontal pump including making of heavy duty sleeve making bronze chuck nut, p & f bearing, no. 6309-2rsi/c3 s.k.f with bearing seat with brass welding , greasing, glain dori, opening & refitting,loading,unloading,carriage complete job /repair of pump fitted with 40 hp horizontal motor / ex-post facto sanction for repair of 40hp pump set at chamber no.3 of 2nd water works rohtak

State Government

CTN :45607060

25 Jun, 2026 4.44 Lacs

Gurgaon - Haryana

Tender For providing submersible pump set vertical 400 lpm 70 meter head with 10hp motor,horizontal submersible pump set 1650 lpm 50 meter head with 30 hp motor,submersible cable and aluminum service cable in village rozka meo and mbs bhadas

Diesel Engine Pump Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors