Latest digital tester Tenders | Government digital tester Tenders

State Government

CTN :45459208

12 Jun, 2026 4.20 Lacs

Shimla - Himachal Pradesh

Tender For repair and re-conditioning of eroded portion of runners of machine no 1 and ii along with dynamic balancing testing and commissioning complete in all respect providing fixing of new exhaust fan

CTN :45434310

19 Jun, 2026 NA

Kheri - Uttar Pradesh

Tender For providing of custom bid for services - (a) dismantle all 15 hubs from the pre-chopper shaft. (b) conduct run-out checks and ultrasonic testing on the shaft. (c) supply 15 new hubs made of cast steel is1030 (iii) grade (as per sample/drawing), machine them to the required specifications (including spacers), install them onto the shaft, and secure them with lock nuts. (d) after fitting the hubs, perform dynamic balancing of the entire assembly and submit ultrasonic and material testing reports for all hubs.

CTN :45409180

19 Jun, 2026 9.50 Lacs

Dindori - Madhya Pradesh

Tender For supply of water supply items for fy 2026-27 in nagar parishad, niwas-g.i.pipe - 2 engine launch g.i. 2‘‘ packinga g.i.pipe nipple 6 inch lengtha g.i incha g.i.socket - 4 incha elbow g.ia elbow g.i - 2 incha elbow g.i - 3 incha band g.i. - 2 incha g.i.nipple - 3 incha band g.i. - 3 incha summersible motor pump 7 1/2a union g.i. - 2 incha pipe cap - 2 incha pipe cap - 3 incha plus tapariae tester tapariae pipe clamp - 2 incha reducer g.i bush - 2 incha reducer g.i bush - 1 1/2 g 2 incha auto switch l.t.la quayl l.t.l. 440 voltagea l.t.l. starter kita g.i.t. - 2 incha g.i.t. - 2g3 incha g.i.t. - 3 incha l.t.l. connection plate 3 poles,5 poles,6 poles ampere meter round size voltage meter suluswal complete brass spendle piece including suluswal complete brass spendle piece including suluswal complete brass spendle piece including suluswal complete brass spendle piece including 2a tail piece c.i 3‘‘a voltage meter square size nut bolt 5 thread nut bolt 4 thread nut bolt 3 thread c.i.d meter square sizea nipple g.i. length 1 ft - 2 inchesa nipil g.i. length 9 inches - 2 inchesa nipple g.i. length 4 inches - 2 inchesa nipil g.i. length 6 inches - 2 inchesa nipple g.i. cumin size - 2 incha nipil g.i. length 3 inches - 1 fita nipil g.i.’’ 3 inches - 9 inches lengtha nipil g.i. 3 inches - 4 inches lengtha nipil g.i. 3 inch zero size ampere voltage meter panela pipe get high quality pipe get high quality pipe get high quality pipe get high quality pipe get high quality chain get high quality chain get strip chain get strip t.wrench tapariae strip get each size glenn dorie non return valve non return valve non return valve non return valve non return non return air valve tap - 1/2 inch tap - 1 inch hexa blade pbc tape raw rover cable copper branded 6 mm. kent co. a cable copper branded 4 mm. kent co. a cable copper branded 2.5 mm kent co. a submersible pump 8 h.p. 8 stagea submersible pump 2 h.p. 12 stagea submersible pump 2 h.p. 20 stagea submersible pump 3 h.p. 25 stagea starter / panel board 5 h.p. 8 stagea starter / panel board 2 h.p. 12 stagea starter / panel board 1 h.p. 12 stagea p.b.c. wire 7 / 16 brandeda whitened nylon rope 10 mma p.v.c. water tank 4 layer 5000 liters 3000 liters 2000 litres, 1000 litresa tank fitting set 1’’ & 3/4’’a hdp pipe super 2‘‘a hdp pipe super 3‘‘a greasea chisel iron 1 fit long chisel iron 6‘‘ long hammer iron do weight 500 g hammer iron tax weight 250 g air wall 4‘‘a multi metera digital tester taparia digital lamp taparia summersive motor pump 3 h.p taxmo cra hdp pipe super 4‘‘a rubber packinga saw blade

CTN :45391003

22 Jun, 2026 NA

Varanasi - Uttar Pradesh

Tender For supply, installation, commissioning and testing of dynamic balancing machine as per attached techincal specification and scope of work. [ warranty period: 30 months after the date of delivery ] ]

CTN :45057581

04 Jun, 2026 9.50 Lacs

Farrukhabad - Uttar Pradesh

Tender For corrigendum : supply of fabrication and erection work e e - places , replacing wornout runner base and installing a new runner base of cane carrier and baggage elevator and r b c , replacing wornout runner with new one of cane carrier and baggage elevator and r b c , removing wornout angle iron and t iron of the cane carrier and reinstalling it by straightening the crooked part , removing the wornout part of the suit from different places and fitting it with new one , chevron grooving of new rollers of the mill , chevron grooving of old rollers of the mill , remove the wornout partition plates of the juice box above and below the juice heater by 10 or 12 mm ms plate and install it , installing ribs at the top and bottom partitions of the juice heater , repairing save all of qurdbody , removing old wornout gutters installed at various places and installing it with new gutters , remove the old wornout save all from pan and quard and install it with new one , reinstalling the new umbrella fitted inside the pan by making a new one and removing the old one , replacement ribbon arm of the mascute receiving crystallizer , making new separator of a centrifugal machine , removing the wornout truff of the hopper and installing it with new one , making and installing new separators for continuous centrifugal machines , removing the tubes of quad juice heater and dynamic juice heater and expanding them by installing new tubes and giving their hydraulic testing satisfactory of size 42 mm , removing the tubes of pan installing new tubes and expanding them and giving hydraulic tesing with satisfactory trial of size 96 mm , removing the wornout flue gas ducting of both the boilers and installing it with newone making from new or old plates , removing the wornout front and roof plate at boiler number 1 and 2 and installing with a new plate , removing the damaged boiler damper and installing a new one , making bagasse suit and installing. , replacement of juice over flow box of clarifier , making and installing bed of motor and pumps at various places as per requirement , replacement 6 inch dia cooling pipe of sulfur furnace , removing the monitor casing of a machine from old machine and installing it and giving its a trial , making amd replacing manholes at various places , making and replacing the enternals of cather of the pan. , making and replacing the new hood of cane cutter , removing the old bottom plate of the lowest compartment of the clarifier and placing a new plate on it after placing an angle trap as per the instructions and giving a satisfactory water trial , reinstalling the stirrer of the clarifier and giving a satisfactory trial , removing the shaft of a pug mill and replacing the old bushes on both sides and fitting new ones , removing and refitting the shaft of a brown sugar magma mixer and installing with new bush , reinstalling the trufff of connecting rod of the hopper , making and installing new catcher strainer , removing the old rail line of the trolley of the unloader and fitting the new rail line satisfactorily and doing water level , reinstalling the old rail line of the unloader s bridge and fitting it and checking water level etc , removal of old and weak channels of 3 inches to 10 inches diameter installed at various places and installation of new ones as per requirement , cutting and straightening old plates installed at various places as per requirement , removal of old and wornout scrubber installed on sulfur furnace and making and replacing with 8 or 10 mm plate and making all the connections , removing the trufff plate including support corroded shell and top cover plate of the top chamber of the clarifier and fitting the new plate and giving it s a water proof trial , re-installation alignment and //bid details 2 / 47 trial of hopper driving end , making and installing the top cover of the centrifugal machine , making an arm and installing it on the shaft of pug mill , making and installing scrubber and bot

CTN :45295706

04 Jun, 2026 NA

Cuddalore - Tamil Nadu

Tender For 25 kn dynamic servo hydraulic fatigue testing machine

CTN :45085351

20 May, 2026 NA

Kota - Rajasthan

Tender For bid to ras supply of long nose plier , line tester , digital tester , insulation tape 25 metre , safety electrical 11kv rubber hand gloves for 11kv , safety electrical 33kv rubber hand gloves for 11kv , frp discharge rod for operation upto 33kv , screw driver , xlpe cable cutter heavy duty , digital earth resistance tester set , led torch 2200 mah battery with 4 hours backup , fire extinguisher co2 type 4 point 5 kg capacity , fire extinguisher dry, type 9 kg capacity , leather safety shoe excellent grip , lineman plier insulated al br , electrician hammer , utility knife , allen key set , hacksaw blade hss all hard , plastic tool box with organiser , electrician leather tool bag , insulation tape ht , pvc bend low level cistern , pvc waste pipe for wash basin 32mm , half stall type urinals , urinal chinaware partition , one piece ewc floor type , door stopper aluminium 100 mm , gi socket 15 mm , gi socket 20 mm , gi elbow 15 mm , gi elbow 20 mm , gi union 20 mm , gi nipple 20mm into 150mm , gi nipple 15mm into 150mm , paint olive green , synthetic enamel paint black , synthetic enamel paint white , synthetic enamel paint white 1l container , synthetic enamel paint black 4l container , pedestal bottom for chair , twin wheel coaster revolving chair , thinner , turpentine oil , touch wood polish 1l container , cp bracket with screw for curtain rods , m seal 01 kg pack , booklets

CTN :45014113

28 May, 2026 30.00 Lacs

Birsinghpur - Madhya Pradesh

Tender For supply of jalpraday samagri for f.y. 2026-27 -solvent, g.i. pipe 1" (class b, medium), g.i. flange 2" (packed), g.i. pipe 2" (class b, medium - swastik), g.i. pipe 3" (class b, medium - swastik), g.i. pipe 4" (class b, medium - swastik), c.i.d. joiner 2" (complete), g.i. socket 1", c.i.d. joiner 4", g.i. socket 2" (long), rubber ring 2" (thick), g.i. socket 3" (long), g.i. socket 4" (long), g.i. socket 6" (long), thread, g.i. elbow 1", pvc joiner 75mm, g.i. elbow 2", g.i. elbow 3", g.i. elbow 4", g.i. elbow 6", pvc joiner 90mm, g.i. bend 1", g.i. nipple 2"x24", g.i. bend 2", g.i. bend 3", g.i. bend 4", g.i. bend 6", submersible motor pump 7.5 hp (texmo/cri), g.i. union 1", pipe cap (sizes 2", 3", 4", 6"), g.i. union 2", g.i. union 3", g.i. union 4", g.i. union 6", connection clamp 2" (strip), connection clamp 2" (strip - size 1), pliers (taparia), connection clamp 2" (strip - size 2), connection clamp 2" (strip - size 3), connection clamp 2" (strip - size 4), tester (taparia), pipe clamp 2" (tata, length 18"), l.t.l. relay 13, 21a; ci reducer 2"x3"; ci reducer 2"x4"; ci reducer 3"x4"; ci reducer 4"x6"; gi bushing 1"x2"; gi bushing 1"x1"; gi bushing 2"x1"; gi bushing 1"x2"; ltl auto switch; ltl coil (440 volts); gi bushing 2"x3"; gi bushing 2"x4"; gi bushing 4"x6"; ltl coil (250 volts); gi brass gate valve 1"; gi brass gate valve 1"; ltl coil (150 volts); gi brass gate valve 2"; ltl starter kit; ltl base; gi brass gate valve 3"; gi brass gate valve 4"; ltl comb; gi tee 1"; gi tee 1"; gi tee 2"; gi tee 3"; ltl push button; ltl. connection plate (3-pin, 5-pin, 6-pin); round ammeter; voltmeter; sluice valve (complete with brass spindle) — sizes: 2", 3", 4", 6"; cast iron (c.i.) tail piece — sizes: 3", 4", 6"; flange (with collar) — sizes: 2", 3", 4", 6"; square voltmeter; nut & bolt (full thread) — sizes: 5/16" x 2", 4/16" x 2", 4/16" x 3", 4/16" x 6", 3/16" x 2"; cast iron (c.i.) detachable joint (complete) — sizes: 3", 4"; rubber ring — sizes: 2", 4" (thick), 6" (thick); square ammeter; g.i. nipple. 1" long g.i. nipple; 2" x 12" long g.i. nipple; 2" x 9" long g.i. nipple; 2" x 6" long g.i. nipple; 2" x 4" long g.i. nipple; 3" x 12" long g.i. nipple; 3" x 9" long g.i. nipple; 3" x 6" long g.i. nipple; 3" x 4" long g.i. nipple; 4" long g.i. nipple; 6" long g.i. nipple; 1 ft g.i. nipple; ammeter-voltmeter panel; high-quality pipe wrench (taparia) 12"; high-quality pipe wrench (taparia) 14"; high-quality pipe wrench (taparia) 18"; high-quality pipe wrench (taparia) 24"; high-quality pipe wrench (taparia) 36"; high-quality chain wrench (taparia) 36"; high-quality chain wrench (taparia) 45"; chain wrench strap (taparia) 36"; chain wrench strap (taparia) 45"; t-wrench (taparia); strap wrench (all sizes); gland packing cord; non-return valve (jindal) 2"; non-return valve (jindal) 3"; non-return valve (jindal) 4"; non-return valve (jindal) 6"; air valve (jindal) 2"; hdpe joint 2"; hdpe joint 3"; hdpe. 4" joint, 1/2" iron tap, 1/3" brass tap, 1" steel tap, hacksaw blade, 63 amp large-size copper-point grip (kent), 32 amp large-size copper-point grip (kent), pvc tape, raw rubber, 6 mm branded copper cable (kent co.), 4 mm branded copper cable (kent co.), 2.5 mm branded copper cable (kent co.), 8 hp 8-stage submersible pump, 2 hp 12-stage submersible pump, 2 hp 20-stage submersible pump, 3 hp 25-stage submersible pump, 5 hp 8-stage starter/panel board, 2 hp 12-stage starter/panel board, 1 hp 12-stage starter/panel board, 7/16 branded pvc wire, whitewash, 10 mm nylon rope, pvc. water tanks (4-layer): 5000 liters, 3000 liters, 2000 liters, 1000 liters; tank fitting sets (1" and 3/4"); super hdpe pipe (2"); super hdpe pipe (3"); grease; iron chisel (1 ft long); iron chisel (6" long); iron hammer (500g); iron hammer (250g); air valve (4"); multimeter; taparia digital tester; taparia digital lamp; submersible motor pump (3 hp, texmo cr); super hdpe pipe (4"); rubber packing; saw blade (hacksaw blade).

CTN :44757118

27 Apr, 2026 9.00 Lacs

Farrukhabad - Uttar Pradesh

Tender For corrigendum : fabrication work d d - places , replacing wornout runner base and installing a new runner base of cane carrier and baggage elevator and r b c , replacing wornout runner with new one of cane carrier and baggage elevator and r b c , removing wornout angle iron and t iron of the cane carrier and reinstalling it by straightening the crooked part , removing the wornout part of the suit from different places and fitting it with new one , chevron grooving of new rollers of the mill , chevron grooving of old rollers of the mill , remove the wornout partition plates of the juice box above and below the juice heater by 10 or 12 mm ms plate and install it , installing ribs at the top and bottom partitions of the juice heater , repairing save all of qurdbody , removing old wornout gutters installed at various places and installing it with new gutters , remove the old wornout save all from pan and quard and install it with new one , reinstalling the new umbrella fitted inside the pan by making a new one and removing the old one , replacement ribbon arm of the mascute receiving crystallizer , making new separator of a centrifugal machine , removing the wornout truff of the hopper and installing it with new one , making and installing new separators for continuous centrifugal machines , removing the tubes of quad juice heater and dynamic juice heater and expanding them by installing new tubes and giving their hydraulic testing satisfactory of size 42 mm , removing the tubes of pan installing new tubes and expanding them and giving hydraulic tesing with satisfactory trial of size 96 mm , removing the wornout flue gas ducting of both the boilers and installing it with newone making from new or old plates , removing the wornout front and roof plate at boiler number 1 and 2 and installing with a new plate , removing the damaged boiler damper and installing a new one , making bagasse suit and installing. , replacement of juice over flow box of clarifier , making and installing bed of motor and pumps at various places as per requirement , replacement 6 inch dia cooling pipe of sulfur furnace , removing the monitor casing of a machine from old machine and installing it and giving its a trial , making amd replacing manholes at various places , making and replacing the enternals of cather of the pan. , making and replacing the new hood of cane cutter , removing the old bottom plate of the lowest compartment of the clarifier and placing a new plate on it after placing an angle trap as per the instructions and giving a satisfactory water trial , reinstalling the stirrer of the clarifier and giving a satisfactory trial , removing the shaft of a pug mill and replacing the old bushes on both sides and fitting new ones , removing and refitting the shaft of a brown sugar magma mixer and installing with new bush , reinstalling the trufff of connecting rod of the hopper , making and installing new catcher strainer , removing the old rail line of the trolley of the unloader and fitting the new rail line satisfactorily and doing water level , reinstalling the old rail line of the unloader s bridge and fitting it and checking water level etc , removal of old and weak channels of 3 inches to 10 inches diameter installed at various places and installation of new ones as per requirement , cutting and straightening old plates installed at various places as per requirement , removal of old and wornout scrubber installed on sulfur furnace and making and replacing with 8 or 10 mm plate and making all the connections , removing the trufff plate including support corroded shell and top cover plate of the top chamber of the clarifier and fitting the new plate and giving it s a water proof trial , re-installation alignment and //bid details 2 / 47 trial of hopper driving end , making and installing the top cover of the centrifugal machine , making an arm and installing it on the shaft of pug mill , making and installing scrubber and bottle jackets of sulfur f

Central Government And Public Sector

CTN :44675281

23 Apr, 2026 NA

Ghaziabad - Uttar Pradesh

Tender For corrigendum : supply of harness dynamic drop testing machine

Digital Tester Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government And Public Sector