Latest digital axle counter Tenders | Government digital axle counter Tenders

Central Government/Public Sector

CTN :45737411

08 Jul, 2026 NA

Moradabad - Uttar Pradesh

Tender For supply & installation of high voltage dc-dc converter module dc 210 for converting 24 vdc to 96 vdc of multi section digital axle counter systems as per rdso specn. no.rdso/spn/176/2013 or latest of cel make . inspection by consignee after receipt of test certificate and guarantee certificate of oem. [warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45735907

10 Jul, 2026 NA

Pune - Maharashtra

Tender For supply of tx and rx coil assembly web mounting and phase reversal type suitable for cel make single section digital axle counter (ssdac) as per rdso specification no spn/177/2012 ver 3 or latest [warranty period: 30 months after the date of delivery ] ]

CTN :45730462

10 Jul, 2026 NA

Sealdah - West Bengal

Tender For comprehensive annual maintenance contract of eldyne-make multi section digital axle counter (msdac) at dum dum jn. station yard in sealdah division for twenty two months.

CTN :45737950

13 Jul, 2026 NA

Sundergarh - Odisha

Tender For providing of custom bid for services - biennial maintenance contract for micro controller based multi section digital axle counter for s&t system

corporations/Associations/Others

CTN :45632456

07 Jul, 2026 NA

Barsingsar - Rajasthan

Tender For corrigendum : supply of st020322540 -bush , pos 3 of hp overload vlv,st020322535 -sealing ring closed pos 19 of ipsv d50 70 10,st020322144 -adjusting pieces clamping pieces lp turbine last stage blade,st020322133 -angle ring for hp control valve casing,st020322181 -threaded ring for hp control valve casing assembly.,st020322138 -angle ring for ip control valve casing assembly.,st020322534 -threaded ring for angel ring at ipcv,st020322543 -bearing shell pos 14 of turning gear,st020322542 -bearing shell pos 15 of turning gear,st020322067 -spherical bush pos 20 for turbine shaft turning gear,st020322097 -gasket for main steam strainer.,st020322545 -main steam stainers,stud m24 160 with nut and washers,st020322163 -gasket for hrh steam strainer,st020322544 -hrh stainers stud m24x190. with nut and washers,st020322546 -scru csk hex soc m8x16-12.9,st020322541 -lp turbine.sealing strip 5 dia 508,st020322550 -screw hex m 8x60-8.8,st020322548 -screw cap soc p m10x20-12.9,st020322549 -screw cap soc p m20x100-12.9,st020322547 -cyl pin dia 20 x

State Government

CTN :45694285

06 Jul, 2026 80.98 Lacs

Umaria - Madhya Pradesh

Tender For procurement of critical spares of tg set for aoh of unit no. 3 and 4, at sgtps, mppgcl, birsinghpur. - hp shaft sealing front as per tender schedule, sealing ring, sealing ring, sealing ring, hp shaft sealing rear as per tender schedule, sealing ring, sealing ring, sealing ring, ip shaft sealing rear as per tender schedule, sealing ring, ip shaft sealing front as per tender schedule, sealing ring, lpc front shaft sealing as per tender schedule, sealing ring, sealing ring, lpc rear shaft sealing as per tender schedule, sealing ring, sealing ring, bearing yoke keys, fitted key for brg. no. 1 yoke bottom, fitted key for brg. no. 1 yoke side, fitted key for brg. no. 2 yoke bottom, fitted key for brg. no. 3 yoke bottom, fitted key for brg. no. 3 yoke side, fitted key for brg. no. 4/5 yoke bottom, fitted key for brg. no. 4/5 yoke side, radial and axial keys as per tender schedule, fitted key fb pedestal, fitted key fb pedestal, fitted key fb pedestal, fitted key fb pedestal, fitted key fb pedestal, fitted key fb pedestal, fitted key for hp rear bearing pedestal (radial-fr) as per tender schedule, fitted key for hp rear bearing pedestal (radial-fr) as per tender schedule, fitted key for hp rear bearing pedestal (axial) as per tender schedule, fitted key for hp rear bearing pedestal (axial) as per tender schedule, fitted key for hp rear bearing pedestal (radial-rr) as per tender schedule, fitted key for hp rear bearing pedestal (radial-rr) as per tender schedule, fitted key ( hp rear brg pedestals), fitted key for ip casing rear (axial) as per tender schedule, fitted key for ip casing rear (axial) as per tender schedule, fitted key for ip casing rear (radial) as per tender schedule, fitted key for ip casing rear (radial) as per tender schedule, fitted key l -196 (radial gusset block in condenser), key l-78, fitted key ip inlet insert as per tender schedule, fitted key ip inlet insert as per tender schedule, fitted key ip extraction connection, fitted key ip casing assembly, key ip casing assembly, fitted key (hp seal), fitted key for hp casing (radial), fitted key for hp casing (axial), brass sealing strip 8x2x845, brass sealing strip roll 8x2, stud m24 x 250 for ms/hrh strainer with hex nut & washer, coupling bolts m56 x270 for hp/ip, coupling bolt m64x335 for ip-lp, clamping piece for lp turbine, locking plate 7th stage for lp turbine, locking plate 8th stage for lp turbine, helical compression spring, fasteners, stud m52 x 220- 20 x185 modified, stud am64 x 305- 20x248, stud am 72x06x320 25x257, stud am 72x06x520 25x308, stud am 72x06x380 25x252, cap nut m52 for hp inner casing, cap nut pm 64, cap nut pm72 x 6, screw hex m 36x180, screw hex m 30x110, mop spares, bearing bush, bush, mop impeller ring dia 185, governor impeller ring dia 106, o ring, shaft check nut 30x1.5, sealing ring, .

CTN :45334872

02 Jul, 2026 NA

Varanasi - Uttar Pradesh

Tender For corrigendum : ner acting for and on behalf of the president of india invites e-tenders against tender noner_snt_proj_bsb_02_2026 closing date/time 21/07/2026 12:30 hrs. bidders will be able to submit theiroriginal/revised bids upto closing date and time only. manual o ers are not allowed against this tender, and any suchmanual offer received shall be ignored.1. nit headername of worksurvey, design, supply, installation,testing, and commissioning of automaticblock signaling work utilizing multi- section digital axle counters (msdac) forcontinuous track circuiting including associated auxiliary works at adjoiningstations along with 4x48 ofc work in the aunrihar jn (arj) - varanasi city (bcy) &banaras (bnrs) -prayagraj rambag (prrb) sections and ei (indoor) works atsarnath(srnt), kadipur (kdq) and rajwari (rji) stns in the varanasi division ofn.e. railway.bidding typenormal tendertender typeopenbidding systemtwo packet systemtender closing datetime21/07/2026 12:30date time of uploadingtender22/05/2026 16:43pre-bid conferencerequiredyespre-bid conference datetime05/06/2026 11:30advertised value 1287170067.90 tendering section projectbsbbidding stylesingle rate for eachschedulebidding unitearnest money (rs.) 25743400.00validity of offer ( days) 90tender doc. cost (rs.)0.00period of completion 18 monthscontract type works - general contract category expenditurebidding start date 07/07/2026are jv allowed to bid yesnumber of jv memberallowed3are consortium allowedto bidnonumber of consortiummember allowed0ranking order for bidslowest to highest expenditure typecapital (works)2. schedules.no. itemcodeitem qtyqty unitunit ratebasic value escl.(%) amount biddingunitschedule () a1-electronic interlocking items350653086.18above/below/para1001 3.00 station17259924.6951779774.07 at par51779774.07page 1 of 27run date/time: 10/06/2026 15:39:01ner hq-s and t/north eastern rlytender documenttender no: ner_snt_proj_bsb_02_2026closing date/time: 21/07/2026 12:301description:- design, manufacture, supply of hot standby architecture electronic interlocking (ei)system complete as per rdso spec. rdso/spn/192/2019 version 2 (or with latest amendment ifany) for stations as per tech. spec. given in tender document, mainly consisting of microprocessorbased cpu card, input card, output card, interfacing equipment and all type of interfacing relays,suitable for re. for system 'a' & 'b' of ei, segregation between the dc-dc converters shouldbemade so that in case of failure, only one system is a ected, and dc-dc converters shall beprovided in n+1 con guration. dual vdu for operation (2 no. of fanless embedded industrial gradepcs, 2 nos. industrial grade 55" 4khd led vdu and 1 no. maintenance console (fanless embeddedindustrial grade pc and industrial grade 55" 4khd led vdu with ups, backup min. 1 hr. & printercolor laserjet with scanning facility similar to hp mfp 3303sdw) as per rdso's tan no.sts/e/tan/3007 ver. 2.0 dt.22.04.2026 (latest), interconnecting cables, rack for ei card, relayrack, ct rack (including terminals), connector, fixtures, mounting arrangement, lightning arrestor,m f earth connections (as per latest tan issued) etc. & accessories necessary to make ei systemfunctional for stations as per approved sip, from ei system up to ct rack, design of circuits andpreparation of wiring diagrams, power supply arrangement on main cabin (railway will provide 110 vdc only.), ofc connectivity (patch cords) as per requirement of system, protocol converter fordataloggers at main cabin (supply and installation of data logger is covered as separate item of theschedule). note:- (i). tenderer should submit details of individual cards/ modules with item wisedetails, rate and quantity in proforma attached as annexure - 'a' prior to ca. (ii). item wise ratesare for indicative purpose, not be used for evaluation. any extra item required for commissioning ofei system will be borne by the contractor without any extra cost.(iii). the el system including

corporations/Associations/Others

CTN :45224325

03 Jul, 2026 NA

Cuddalore - Tamil Nadu

Tender For corrigendum : supply of turbine and governing spares -st020270258 , st020322173 , st020322175 , st020322176 , st020270247 , st020270252 , st020270259 , st020270260 , st020270244 , st020320341 , cs010810104 , st020270228 , st020320497 , st020320457 , st020320481 , st020320488 , st020320484 , st020320482 , st020322453 , st020320493 , st020320480 , st020320456 , st020320870 , st020320871 , st020320935 , st020321986 , st020320197 , st020321966 , st020320196 , st020320566 , st020320787 , st020320164 , st020320064 , st020320703 , st020322454 , st020320701 , st020320133 , st020320312 , st020320090 , st020320035 , st020320091 , st020320444 , st020320389 , st020320491 , st020320384 , st020320577 , st020320158 , st020320439 , st020320393 , st020320432 , st020320397 , st020320465 , st020250425 , st020320082 , st020270096 , st020320335 , st020250004 , st020260178 , st020321979 , st020320803 , st020321043 , st020321048 , st020321049 , st020320264 , st020320265 , cs010810174 , st020320107 , st020320436 , st020320437 , st020320365 , st020320430 , st020320015 , st020321974 , st020320019 , st020320020 , st020321978 , st020321977 , st020320261 , st020321953 , st020321980 , st020320292 , st020270731 , st020270730 , st020270729 , st020270728 , st020320555 , st020320556 , st020270732 , st020270724 , st020270725 , st020322470 , st020270726 , st020322471 , st020322472 , st020270727 , st020320736 , st020320478 , st020320595 , st020320337 , st020320135 , st020320463 , st020200803 , st020320596 , st020320122 , st020320077 , st020320682 , st020320171 , st020320737 , st020320658 , st020320523 , st020320449 , st020320450 , st020320451 , st020320685 , st020320123 , st020320687 , st020320709 , cs010810188 , st020321274 , st020321275 , st020321216 , st020321214 , st020321219 , st020200802 , st020200801 , st020321191 , st020321192 , st020321194 , st020322473 , st020322474 , st020200789 , st020200790 , st020200791 , st020200792 , st020200793 , st020200794 , st020200795 , st020200796 , st020200797 , st020200798 , st020321193 , st020200799 , st020200800 stud am 80 x 6 x 435 -25 x 297 for ip casing assembly, stud am100x6x470-25x302 for ip inner casing, ip inner casing head shaft m45(120x6x620), head bolt m120x6x620-25x330 for ip inner casing, head bolt 28.5 butt 140x9x640-32x565 for ip inner casing, cap nut pm 80x6 for ip inner casing, cap nut pm 100 x 6 for ip- casing, cap nut pm 120 x 6 for ip casing, cap nut p butt 140x9 for ip inner casing, hp casing sealing ring, hp casing - u - sealing ring drg nos.21050101006 part no.008, m42x115 screw hex for hp turbine casing, hp casing - pin, fastnr/hp inn cas/pr. out bolt m36x100, fastnr/hp inn.casing/pin cylinda30h8x90, hp shaft sealing front-pin taper 16x130, hp shaft sealing //bid details 2 / 112

corporations/Associations/Others

CTN :45345600

01 Jul, 2026 14.56 Lacs

Sonbhadra - Uttar Pradesh

Tender For corrigendum : supply of oh of main steam line valve v2 6 , oh of steam by pass valve v2 27,15, and v2 7 , oh of es 3,4,5,6 and 7 , oh of v2 -82-84 and v2-81-a to 81c , oh of hd-21, hd-29, hd-30 and hd-31 , oh of nrv of h.p. heater and feed pump , oh of group protection valve of hph , oh of dw-4, 37,38,39,40,41 and ca 5 , oh of cst makeup valve v6 60 , oh of as-48 valve , oh of nrv of extraction line es-8 , oh of suction valve of bfp , oh condensate wtr throw off valve to condenser , oh throw off valve to cond and steam isolating of lph2 , oh of steam isolating valve of lph 3, 4 , oh of safety valve of aux prds or deaerator , oh of safety valve of h.p. heater , oh of safety valve of l.p. heater. , oh of safety valve of cbd tank. , oh of safety valve of flange or stud heatng , oh of safety valve of warm up line. , overhauling of actutator of as 48 valve , oh of actr feed line valvev2 81 or v2 82 or v2 83 or v2 84 , oh of actr of v2 7 or v2 15 or v2 27 , oh of actr drip line valve and ext line valve , oh of actr valve connected to condenser , oh of actr cst make valve , oh of actr of msv l and r , oh of actr of steam isolating valve to lph2 to 4 , oh of actr steam throw off valve to condenser , cut or weld or repl of hp valve 15 to 50mm , cut or weld or repl of hp valve 51 to 100mm , cut or weld or repl of h p valve 101 to 150mm , oh of butterfly valve of condenser , oh of dea and fst with internal painting , repair or replacement of broken hanger , tightening of loose hangers , cut or weld or repl of l.p. valve 15 to 50mm , cut or weld or repl of l.p. valve 51 to 100mm , cut or weld or joint of h.p. pipe 15 to 50mm , cut or weld or joint of h.p. pipe 51 to 100mm , cut or weld or joint of h.p. pipe 101 to 150mm , cut or weld or joint of h.p. pipe 151 to 300mm , lift or straight aprds hdr by cutting weldding , o h of lph 1a , 1b , o h of lph 2 3 and 4 , oh and attend flange leakage of gc i or ii , clean of turbine oil or h2 gas cooler str , repl of damaged sp. valve v2 38 , repl of damaged special valve v2 27 , oh of turbine oil coolers , oh of main ejectors of turbine , oh of h.p. heater , oh of lcv 3to15pcv-5, 14,16,17,tcv 8 , repl bend of lp drip connected to drip pump or condenser , cut damaged bend of hph drip cont to dea , cut weld or repl of h.p. valve 151 to 300mm , blank of crh line for ht and normalizing , oh of h.p. valve nrv in h.p. line , oh of l.p. valve nrv , oh of energy absorber of bfp , oh of dss of aux. prds. , 2coat paint bcw,clr,bfp,cep,drip pump and line , 2coat paint cst,bcw pump ,swc tank,line,valve , 2coat paint hcplg,sw,bcw,cw exc clr line , 2coat paint air washer sys,cep or phos orhyd , 2coat spray paint syn super enamel lpc , 2coat spray paint front ped,barring gear , 2coat spray paint brg and housing turbine , 2coat spray paint cntl valve casing , 2coat spray paint condenser and line , 2coat spray paint main oil tank , 2coat spray paint main ejector , 2coat spray paint centrifuging machine , 2coat spray paint lube oil cooler , letter writing 2 inch size dia

State Government

CTN :45432115

13 Jul, 2026 41.66 Lacs

Raichur - Karnataka

Tender For corrigendum : rtps-supply and replacement of main hoist, auxiliary hoist wire rope with load certificate, slings for hp,ip and lp turbine rotors and its casing and chain pulley blocks.

Digital Axle Counter Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

corporations/Associations/Others

State Government

corporations/Associations/Others

corporations/Associations/Others

State Government