Latest digital controller Tenders | Government digital controller Tenders

CTN :44283848

14 Apr, 2026 39.90 Lacs

Delhi - Delhi

Tender For corrigendum : supply of two way full range 15 inch , four channel power amplifier for 4 x 750w , 12 channel mixing console , digital controller premium digital controller , high performance digital wireless dual handheld , dynamic vocal microphone , 24u rack , big size microphone stand , microphone lines high grade, professional, 2 core , speaker lines 2 core 2. 5 sq mm , pvc conduit 25 mm , pvc conduit 32 mm , 2 way wall mount speaker , mixer amplifer 4 to 16 ohm , wired gooseneck , usb reader , speaker cable single pair, 2 core, 1. 5 sqmm , cat 6 1 run of cable , subwoofer with 17 inch , two-way full range speakers 8 inch , four channel class d power amplifier for 4 x 250w , 16 channel mixing console , wireless dual lapel microphone system , dynamic instrument microphone , single-chip dlp laser projector , hdmi matrix switcher , hdmi extender kit , hdmi cable 1. 5 mtrs , hdmi cable 5 mtrs , fire suppression system , 25 mm dia ms flexible pipe , two-way full range speakers 15 inch

CTN :44310554

14 Apr, 2026 10.41 Lacs

Delhi - Delhi

Tender For corrigendum : supply of work as per boq : -chiller , 15 inch two way coaxial , two channel power amplifier , 12 channel mixing console , digital controller , high performance digital wireless , dynamic vocal microphone , system rack m s rack minimum 18u , big size microphone stand , 2 crore high conductivity pvc , 2 core, 2. 5 sq mm xlpe insulated pvc , dwc pipe 63 mm dia

CTN :44789373

15 Apr, 2026 58.56 Lacs

Pune - Maharashtra

Tender For supply, installation, testing and commissioning of 500 kva diesel generator set with amf panel and installation of retrofitting emission control device (recd) for 2 nos. 500 kva diesel generator set installed at nccs, ganeshkhind, pune.

Central Government And Public Sector

CTN :44010307

10 Apr, 2026 10.19 Lacs

Kannur - Kerala

Tender For bid to ras supply of disconnecting and removing of all existing pmu control wiring , disconnecting and removing all existing control wiring in the old amf panel , supplying and fixing of amf controller , supplying and fixing of 4 pole 100 amps mccb , supplying and fixing of 63 amps 4 pole power contactor with addon block , supplying and fixing of push button switch for on off , supplying and fixing of 12v relay , supplying and fixing of 63 amps 4 pole 4 way with centre off rotary selector switch , supplying and fixing of 6 amp 3 way with centre off rotary selector switch , supplying and fixing of mechanical interlock suitable for 4 pole power contactor mcx 12 , supplying and fixing of 12v 10a smps type battery charger , supplying and fixing of 6a c series sp mcb , supplying and laying of 4 core 16 sq.mm pvc insulated al cable direct in ground , supplying and laying of 4 core 16 sq.mm pvc insulated al cable on surface of wall , supplying and laying of 4 core 16 sq.mm pvc insulated al cable in masnory open duct , supplying and making end termination with brass compression gland , supply and laying of 8 core 1.5 sq.mm copper conductor armoured control cable

State Government

CTN :44798192

28 Apr, 2026 1.97 Lacs

Durg - Chhattisgarh

Tender For the detail of works includes:a. the tenderer shall carryout the following works during annual maintenance contract period along with the servicing of the diesel generator set.1. general checkup & preventive maintenance and to fill up preventive checkup schedule as follows:a) check lube oil level and conditioning of lube oil, top up/refill if required.b) the oil filters shall be replaced whenever oil is changed.c) the air filters shall be cleaned periodically with compressed air, check batteries and top up the distilled water if required.d) check functioning of changing alternator.e) engine safety viz. high water temperature gauge, oil temperature gauge and high speed gauge shall be checked for their functions and repaired/replaced if required.f) coolant level and conditioning of coolant shall be checked and refilled if required.g) check fan and alternator drive belts and tightened if required.h) the governor shall be checked and tuned for proper functioning.i) check for leaks if any and shall be rectified.j) check reports shall be submitted every month/every breakdown calls.2. checking and servicing of engine for smooth running, its unusual sound and color of smoke and exhaust and set it right in case of deviations.3. checking and repairing and leakage of fuel, lubricating oil and coolant.4. cleaning and changing of air filters as per requirement.5. setting of valves tappets whenever required.6. checking and repairing of accessories drive, turbo charger and crankshaft endplay whenever required.7. checking of alignment of engine & alternator as per requirement.8. checking of throttle control and its setting.9. checking of instrument panel including replacement as and when required.10. checking of rotating diodes assembly in brushless alternator including replacement as and when required.11. checking of wiring system and repairing/replacement as and when required.12. repair and maintenance of relays including contractors in control panel.13. checking of battery terminal and de-sulphating.14. diagnosis of faults in engine and alternator and its rectification.15. breakdown calls to be attended on priority within 6 hrs.16. providing spare avrs, self-starter and accessories, free of charge, if the repair/overhaul/replacement is expected to be taken in more than two days.17. checking/repair/adjustment/replacement/servicing shall be carried under annual maintenance contract except cost of component/parts to be replaced due to wear & tear.18. the firm should undertake to arrange genuine spares of the diesel engine, alternator and amf panel as and when required within two working days.19. the tendererâ€™s service engineer shall visit the site for attending the generator sets not less than twelve times during the contract period (minimum once in a month) and shall inspect the generator set thoroughly. each visit shall take place during 1st week of each month.20. the tendererâ€™s service engineer shall visit once in two month for checking of electrical side viz. alternator, amf control panel, if any.21. the engine shall be run on no load or at available load, and should be checked for any leakage and abnormal noise. if any such abnormality noticed shall be diagnosed and remedial action shall be taken.22. standard check list:a) replace minor parts (i.e hoses and filters etc) sub-assemblies as and when required.b) service engineers during the visit will report on the performance or any other abnormality and inform parts requirement. he shall also submit the report on work done and recommendations as well as spare parts required.c) attend emergency call on priority (usually same day). however, if the engineer is required or any particular date and time, it would be the responsibility of the customer to intimate the contractor in advance.d) major overhauling/ top overhauling / pt pump & injector calibration /replacement of major parts/ rewinding of alternator or repairs or breakdown of the diesel generator set are to be charge

CTN :44808213

18 Apr, 2026 12.88 Lacs

Bikaner - Rajasthan

Tender For providing of electricls tools & equipments - heavy duty screwdriver insulated , electrician screwdriver thin stem insulated handle , knife double bladed electrician , chisel firmer with wooden handle , , (a) crimping tool , wire cutter and stripper , hacksaw frame , tweezers , drill hand brace , plane cutters , smoothing cutters , file flat rough , file flat bastard , file rasp, half round , de soldering gun , contactor & auxiliary contacts (rm) , contactor & auxiliary contacts. (rm) , pin type, shackle type, egg typ & suspension type insulators including , hardware fitting , portable electric drill machine , load bank (lamp/heater typ , brake test arrangement with tv spring balance rating , laboratory type induction coi , series test lamp (rm) , knife switch dpdt fitted with fuse terminals (rm) , knife switch tpdt fitted with fuse terminals (rm) , miniature circuit breaker (rm , earth plate (rm) , earth electrode (rm) , elcb and rccb (rm) , fuses (rm) , rheostat (sliding type) , capacitors (rm) , various electronic components (rm) , various lamps (rm) , plug socket piano switch lamp holder (rm) , cables , twisted pair , non-metallic sheathed cable , underground feeder cable , ribbon cable , metallic sheathed cable multi- , conductor cable coaxial cable , direct-buried cable (rm) , rubber mat (rm) , electrician helmet , rcc pole with accessories (ms angle iron, 'c' clamp, stay insulator etc.) and materials , ohm meter; series type & shunt type, portable box type , digital multi meter , a.c. voltmeter m.i. analog, portable box type housed in bakelite case , milli voltmeter centre zero analog, portable box type housed in bakelite case , ammeter mc analog, portable box type housed in bakelite case , ac ammeter mi, analog, portable box type housed in bakelite case , kilo wattmeter analog , (b) frequency meter (digital) , magnetic flux meter , tachometer , tong tester/clamp meter , megger , single phase variable auto transformer , growler , ac starters , oscilloscope dual trace , function generator , discrete component trainer , linear i.c. trainer , digital i.c. trainer , domestic appliances- , 2. mixture & grinder , h. washing machine semi-automatic , i. motor pump set , oil testing kit , battery charger , current transformer , potential transformer , 15 or 17 computer or latest version , d.c. shunt generator with control panel , motor-generator (ac to dc) with control panel , d.c. compound generator with control panel including fitted rheostat, voltmeter, ammeter and breaker , fire buckets , fire extinguisher co2 , black board/white board , almirah , metal rack , lockers with drawers , working bench , writing board , instructor's table , instructor's chair , diesel generator set with changeover switch, over current breaker and water/air-cooled with armature, star-delta connections ac 3 phase , dc generators-series, shunt and compound type for overhauling practice , pillar electric drill machine motorized , motorised bench grinder , a.c. series type motor , single phase capacitor motor with starter switch , ceiling fan coil winding machine , primary current injection set , stepper motor with digital controller , shaded pole motor , smart meter , ev charger , ev charger (home) , ac squirrel cage motor with star delta starter and triple pole iron clad switch fuse with mechanical load. , ac phase-wound slip ring motor with starter switch , universal motor with starter/switch , synchronous motor with accessories like starter, excitation arrangements. , thyristor igbt controlled d.c. motor drive with tacho-generator feedback arrangement , thyristor/igbt controlled a.c. motor drive with , single phase transformer, core type, air cooled , three phase transformer, shell type oil cooled with delta/ star , electrical machine trainer

CTN :44752845

09 Apr, 2026 40.31 Lacs

Ambala - Haryana

Tender For supply and installation of 500 kva diesel generator set with of amf control panel at syl parallel drain pump house.

State Government

CTN :44779135

15 Apr, 2026 7.71 Lacs

Nabarangpur - Odisha

Tender For supply, inst., testing and comm. of 35 kva/26 kw cpcb iv, diesel generator set with amf control panel to be installed at govt. college of nursing at ngp in the dist. of ngp (building)

Central Government/Public Sector

CTN :43991067

13 Apr, 2026 NA

Gautam Budnagar - Uttar Pradesh

Tender For corrigendum : supply of supply and installation of 1000 kva dg sets at powergrid c c -supply of 1000kva dg set along with amf panel and other accessories at dadri , supply of 1000kva dg set along with amf panel and other accessories at rihand , supply of 1cx630sqmm aluminum cable as per technical specifications at dadri , supply of 1cx630sqmm aluminum cable as per technical specifications at rihand , dismantling of exisitng dg sets, power and control cables, amf panels etc as per scope of work at dadri , dismantling of exisitng dg sets, power and control cables, amf panels etc as per scope of work at rihand , installation, testing and commission including civil works as per scope of works and as per techncial specifications at dadri , installation, testing and commission including civil works as per scope of works and as per techncial specifications at rihand