Tender For distribution transformer of rating 500 kva, 11kv/415v-240v, 3-phase, 50hz, outdoor type, plinth mounted, the type of tap changer for variation of hv voltage from +5% to -15% in steps of 2.5%, energy efficiency level 3 or better, oil immersed, non-sealed type (transformer tank body and cover are bolted), copper wound, primary winding in delta and secondary winding in star (vector symbol- dyn11), onan cooled transformer, confirming to is 1180 (part 1): 2014with amendment nos. 1,2,3,4 or latest, and supplied with all standard fittings mentioned in clause 20.1 of is 1180 (part 1) latest with condition that drain-cum-sampling valve will be applicable for all capacity of transformers. oil temperature indicator & winding temperature indicators will be provided as per clause 20.2 of is 1180 (part 1). terminal agreement: the transformers shall be fitted on high voltage and low voltage sides with outdoor type bushings appropriate voltage and current ratings. the high voltage bushings (3 nos.) shall confirm to is/iec 60137. the low voltage bushings (4 nos.) shall confirm to is 7421. suitable cable-end box along with cable entry hole glands is to beprovided at l.t. side. following has to be submitted by supplier along with supply of material: (i) type test report of transformer having same rating, make (& model if any) and design from nabl accredited lab as per is 1180 (part 1) latest. (ii) routine test certificates as per is: 1180(part 1) latest. (iii) special test certificates as per clause 21.4 sl. no. (a), (c), (d), (e) of is: 1180 (part 1) latest. [ warranty period: 30 months after the date of delivery ]
Tender For rca for procurement of local purchase material required for operations and maintenance of equipmets of 33 11 kv ss under onm circle raisen - isolator pad clamp for raccoon & dog conductor, 33 kv bushing for ptr suitable for 20 mm stud (bimetalic clamp suitable for ptr 20 mm dia brass stud weight 1.450 kg), 11 kv bushing for ptr suitable for 20 mm stud (bimetalic clamp suitable for ptr 20 mm dia brass stud weight 1.450 kg), mog(megnetice oil level indicator model-so-6 150 mm suitable for conservator mounting horizontal alarm switch low oil level, mfm suitable for control panel of all makes, c&r panel indicators, expulsion fuse 20 a for capacitor bank ( for 100 kvar unit), expulsion fuse 40 a for capacitor bank ( for 200 kvar unit), brass stud 20 dia suitable for 33 kv bushing (bimetalic clamp suitable for ptr 20 mm dia brass stud weight 1.450 kg), brass stud 20 dia suitable for 11 kv bushing (bimetalic clamp suitable for ptr 20 mm dia brass stud weight 1.450 kg), winding temperature indicator (wti) , dial 150mm , with capilary, mercury swicth type, oil temperature indicator (oti) , dial 150mm , with capilary, mercury swicth type, tnc switch suitable for control panel of all makes, rubberized cork (gasket) strip size; 80 mmx10 mm, silica gel breather 3 kg casted acrylic plastic body with silica gel, silica gel blue, conical rubber washer for cts (size 12 mm), conical rubber washer for cts (size 16 mm), conical washer (19 mm), trip coil , shunt type 30 volt dc suitable for bhel make vcb specification 30 volt dc, resistance: 4.8 0.1 ohms, outer diameter 42 mm, inner diameter; 16mm (with brass tube) lenth- 93 mm, brass tube length: 98 mm, pluger length: 140 mm, copper wound and varnished with 0.5 meter insulated pvc 1.0 sqmm wire weight, coil: 505 gms, plunger: 126 gms, minimum overall weight of coil:965 gms., trip coil for essun make vcb, trip coil for megawin make vcb specification 30 volt dc, resistance: 4.8 0.1 ohms, outer diameter 42 mm, inner diameter; 16mm (with brass tube) lenth- 93 mm, brass tube length: 98 mm, pluger length: 140 mm, copper wound and varnished with 0.5 meter insulated pvc 1.0 sqmm wire weight, coil: 505 gms, plunger: 126 gms, minimum overall weight of coil:965 gms., auxiliary switch suitable for megawin make 11 kv vcb, auxiliary switch suitable for bhel make 11 kv vcb, bridge rectifier for battery charger., trip coil 30 volt dc suitable for stelmec with assembly, operating voltage: 3.5 0.1 ohm, closing coil with assembly for make stelmec 11kv vcb 30v dc,coil resistance 3.5 0.1 ohm, trip coil suitable for schneider make vcb with assembly 30 v dc,coil resistance 8.7 0.1ohm ,outer diameter 46mm,inner diameter 16mm,height 40mm,copper wound with 0.5meter insulated pvc 1.5sqmm.wire overall min.weight of coil 225gms., trip coil suitable for cgl make 11kv vcb with assembly 30 v dc,coil resistance 2.4 0.1ohm ,outer diameter 51mm,inner diameter 20mm,height 48mm,copper wound with 0.5meter insulated pvc 1.5sqmm.wire overall min.weight of coil 300gms., limit switch motor for 11kv & 33kv cgl vcb, trip coil with plunger for shreem make vcbs 30 v dc,coil resistance 3.9 0.1ohm ,outer diameter 51mm,inner diameter 26mm,height 51mm,copper wound with 0.5meter insulated pvc 1.5sqmm.wire overall min.weight of coil 395gms., 33 kv trip coil suitable for stelmec make vcb, auxiliary switch suitable for stelmec make vcbs, spring charging motor for bhel make vcb 230vac/220 dc/880 watt, 11kv vacuum interrupter suitable for stelmec vcbs model type/wl/34599m3+, spring charging motor suitable for stelmec make vcbs 220ac/dc 150 watts nl -rpm 10, spring charging motor suitable for crompton make vcb 220ac/dc 150 watts nl -rpm 10, trip coil 30 volt dc suitable for cg 33 kv vcb with assembly., big gear suitable for stelmec vcb, small gear for stelmec vcb, 11kv drive rod make magawin, 11kv drive rod make bhel, 11 kv insulating pull rod 11 kv bhel make vcb, single phase 500 watts hand drill machine bid dia size 2mm to 10mm, pg clamp
Tender For multiple media auto changeover converter-4 port, for simultaneously interconnectingdigital axle converter, ufsbi, block phone etc. across a block section/ ibs over multiple media. product has the following features: a)two 120 ohm e1 main links with rj45 connector, having(1+1) hot standby facility b)two optical main links with (1+1 hot standby dual core path and single core path) having20 km driving distance. c)four v.21n.23 (e&m) 2-wire/4-wire user interface with auto changeover to quad links in case of failure of all main links. each user port is configurable as 2w or 4w without any restriction. d)unit supports power off fail safe mechanism. in case the unit is switched off, all analog user devices are bypassed to the quad link automatically. - e)unit supports four numbers of potential free contacts which can be linked with data logger/rtu for e1 status, optical status & power supply status. f)unit supports front panel resettable audiblebuzzer in case ofmain link fails (optical or e1). g)unit suppqrts front panel led indicators for quad health status, e1 dual, optical dual path. h)uriit %b7 has dual hot standby dc power supply having 24vdc/48vdc i)unit is 1u height with 19 inch rack mountable-facility j)unit supports operating temperature from -5 degree celsius to +55 degree celsius. accepted make/brand:-cygnus or team-link or similar. make/brand- cygnus 845-4p or similar ( warranty period : upto 30 months from the date of supply) [ warranty period: 30 months after the date of delivery ] ]
Tender For bid to ras supply of biological indicator rapid readout h2o2 30pcs per box , chemical indicator class iv to verify all parameters of plasma sterilization together that is time temperature colour change when exposed to hydrogen peroxide 250 psc per box , chemical indicator class v for steam to verify parameters of steam sterilization time temperature steam quality should be compliant with bs en or iso 011140 1 , chemical indicator integrator for steam sterilizer class 5 packet of 1000 , chemical indicator tape to monitor eto sterilization by indicating a colour change applicable to both warm and cool temperature cycles run at 370c or 500 c free size 18mm x 55mtrs , chemical indicator to verify all parameters of eto sterilization together that is time temperature colour change when exposed to eto 480 pcs per box , eto gas catridge 40gm , flat rolls for eto or autoclave 10cmx200 mtr , flat rolls for eto or autoclave 20cmx200 mtr , flat rolls for eto or autoclave 40cmx200 mtr , medical instrument lubricant non silicon based for metal instruments 4x1 gal per case , packing paper tyvek 100mm x 80mtr , ink catridge for 3 line labellar machine , packing paper tyvek 200mm x 80mtr , print papers h2o2 , rapid readout biological indicators for steam sterilization containing standardized viable population of bacillus stearothermophilus spores in less than 30 min in conj , sterilant agent hmsa 140 h2o2 catridge , sticker with eto chemical indocator for documentation 30 rolls per box , sticker with h2o2 chemical indicator for documentation 30 rolls per box , wrapping sheet sms 35gsm 100cm x 100cm , autoclave indicator tape with class 1 process indicator 18mm x 50mtr rolls iso 11140 and fda clearance , autoclave wrapping paper of sms with 100 percent polypropylene of approx weight 125gm per m2 size 120 x 120cm , chemical indicator strip for casp 80250 per pkt , casp 80 agent 100ml bottle 2 bottle per box //bid details2 / 25
Tender For corrigendum : supply of chemicals, reagents & consumables for blood centre - fruit juice for blood donors 200 ml, evolis conductive tips 300 ul- 1 tip., evolis conductive tips 1100 ul- 1 tip., deep freezer -80 degree, deep freezer -40 degree celsius, data logar multi channel, thermograph marker pens, steel trays, smiley balls, plastic multipurpose box, bulbs & cuffs for aneroid b.p apparatus (big ben), weighing machine - adult, vdrl slide rotator, table top laboratory centrifuge, spygmomanometer b.p apparatus) (aneroid), serological water bath, rh viewing box, refrigerators with in built temperature monitor - 360 l, portable autoclave 350 x 325 mm dia, photo electric colorimeter, ph meter with accessories, multichannel micro pipette volume range 40-500ul microlitere, micropipette adjustable volume range 100-1000ul, micro pipette adjustable controller volume range 20- 200 ul microlitre (imported), micro pipette adjustable controller volume range 10- 100 ul microlitre (imported), interval timer electric, insulated containers for transporting blood bags between 2 degree celsius c to 6 degree celsius c (capacity 2-3 bags), incubator with thermos tatic control, hot air oven, high precision electronic weighing balance, hemoglobinometer, donor bleeding couch, domestic refrigerators 300 ltrs, data loggers for temperature recording, calibrated laboratory thermometer, blood bank refrigerator 600 l, blood bank refrigerator (50bags capacity)., binocular microscope with built in illumination, bar code stickers, bar code reader, micro slides 1 x100 slides- 1 box, glass test tubes 7ml capacity 12x100mm, glass test tubes 5ml capacity 12x75mm, glass test tubes 5cm x0.5 cm( borosil), glass test tubes 10cm x1 cm( borosil), glass test tubes 7cmx1 cm (borosil), wash bottle (500ml ), wafers for sterile connecting device, transfer bags, tissue paper -1 roll, thermal indicators, test tube cleaning brushes, steel trays with lid, steel test tubes stands with 30 holes 5 cm x 1 cm, stainless steel scissors straight 10 cms, portable trolley for shifting things in camps, portable trolley bags, plastic trays, plastic test tube stand with 50 holes, plastic test tubes stands with 40 holes 10 cmx 1 cm, plastic test tubes stands with 30 holes 7 cm x 1 cm, plastic bowls 8inches & 12inches diam, plain plastic disposable test tubes 5 ml, plain disposable test tubes 5 ml non vaccum red cap, plain disposable test tubes 3 ml non vaccum red cap, microtips blue (0.2 - 1ml) disposable, micro tips yellow ( 20-200 micro litre) disposable, labolene -500 ml -bottle, k2 edta non vaccum tubes 2 ml, k2 edta vaccum tubes 2 ml, insulated containers for carrying 50 blood bags (camps), handy plast (round 2 cms diameter ), disposable pasteur pipettes 5 ml, disposable pasteur pipettes 2 ml, color coded labels for blood bank, chart pen, chart paper for 7 day chart recorder for -40 deep freezer (terumopenpol), chart paper for 7 day chart recorder for - 80degree celsiusdeep freezer (terumo penpol), chart paper for 7 day chart recorder for 2 degree celsius to 6 degree celsius c blood bank refrigerator (terumo penpol), carbonised sample tips 300 ul, carbonised reagent tips 1100 ul, carbon brushes for table top laboratory centrifuge., camp cots, bullet vials 1.5ml with safe cap lock, bulbs for microscope 6 v 20 w, blood collecting triple bags (totm) 450 ml, blood collecting single bags 350 ml, blood collecting bag pediatric 100 ml, blood collecting triple bags 450 ml, blood collecting triple bags 350 ml, blood collecting double bags 450 ml, blood collecting double bags 350 ml, blood collecting quadruple bags for cryo precipitate 450 ml, artery forceps, syphilis elisa kit 4th generation (96/kit)-1kit, syphilis elisa kit 3rd generation (96/kit)-1kit, syphilis cards- 1 test, malaria p. f. / p v cards-1 test, malaria elisa (96 t kit)- 1 kit, hiv rapid kits-1 test /card, hiv elisa kit 4th generation (96t/kit)- 1 kit, hcv elisa kit 4th generation (96/kit)-1kit, hcv elisa kit 3rd gen
Tender For distribution transformer of rating 500 kva, 11kv/415v-240v, 3-phase, 50hz, outdoor type, plinth mounted, the type of tap changer for variation of hv voltage from +5% to -15% in steps of 2.5%, energy efficiency level 3 or better, oil immersed, non-sealed type (transformer tank body and cover are bolted), copper wound, primary winding in delta and secondary winding in star (vector symbol- dyn11), onan cooled transformer, confirming to is 1180 (part 1): 2014with amendment nos. 1,2,3,4 or latest, and supplied with all standard fittings mentioned in clause 20.1 of is 1180 (part 1) latest with condition that drain-cum-sampling valve will be applicable for all capacity of transformers. oil temperature indicator & winding temperature indicators will be provided as per clause 20.2 of is 1180 (part 1). terminal agreement: the transformers shall be fitted on high voltage and low voltage sides with outdoor type bushings appropriate voltage and current ratings. the high voltage bushings (3 nos.) shall confirm to is/iec 60137. the low voltage bushings (4 nos.) shall confirm to is 7421. suitable cable-end box along with cable entry hole glands is to beprovided at l.t. side. following has to be submitted by supplier along with supply of material: (i) type test report of transformer having same rating, make (& model if any) and design from nabl accredited lab as per is 1180 (part 1) latest. (ii) routine test certificates as per is: 1180(part 1) latest. (iii) special test certificates as per clause 21.4 sl. no. (a), (c), (d), (e) of is: 1180 (part 1) latest. [ warranty period: 30 months after the date of delivery ]