Tender For procurement of lab equipments for mechanical engineering department. - procurement of lab equipments for mechanical engineering department., exhaust gas analyzer: portable 5 gas exhaust analyser for automotive lab use measurement of, co (0-10 %) co2 (0-20%) hc (0 20000 ppm) o2 (0-25%) nox (0 5000ppm) gas sampling rate 01 lit / min response time = 5 seconds warm up time =03 minutes display lcd input membrane keyboard operating temperature - 0- 50 degree celsius power consumption 25 w, operates on 230 v ac / battery supplied with sampling probe, filters, and carrying case, 3d printer: build volume (wxdxh) 256 x 256 x 256 mm * shell enclosed (plastic & glass) hot end all-metal nozzle 0.4 mm stainless steel included max hot end temperature 300 nozzle diameter 0.4 mm (included) 0.2 mm, 0.6 mm, 0.8 mm (optional) build plate compatibility textured pei plate, cool plate, engineering plate, high temperature plate max build plate temperature 100 max speed of tool head 500 mm/s max acceleration of tool head 20 m/s supported filament pla, petg, tpu, pva, pet, abs, asa chamber monitoring camera low rate camera 1280 x 720/0.5fps time lapse supported filament run out sensor yes control board fan closed loop control auxiliary part cooling fan closed loop control air filter activated carbon filter, mitutoyo screw thread micrometer (0 -25 mm) mitutoyo screw thread micrometer 0 25 mm range; 0.001 mm accuracy; 0.005 mm/0.01 mm resolution; interchangeable anvils & spindle tips for multiple thread forms hardened measuring faces ratchet stop; calibration certificate protective case
Tender For reer tender notice - purchase of non consumable item in thermal lab for mechanical department - open type air conditioning system kitcode - (d030)1.5 ton1. compressor type:open type capacity:0.5 tr to 1tr power 1 hp supply 230 v,single phase 50 hz2.condenser type: air cooled condenser material : copper tube with aluminium fins fan motor:230 v ac3.evaporator type :open fin type material : copper air circulation : blower assisted mounted openly for observation4. blower/fan type: centrifugal blower air flow : adjustable power:230 v ac5. refrigeration type : r226. measuring instruments pressure gauges: low&high pressure temperature:thermometers,digital sensors voltmeter : 0 to 300 v ammeter : 0 to 10 a temperature display : at inlet and outlet points energy meter: single phase, exhaust gas analysercode - (d037)to find the percentage of co,co2, o2, amount of hc and nox using exhaust gas analyzer. afr and lammda are measurable.
Tender For for mechanical engineering department lab equipments are required as per new syllabus - upgradation of labarotariesmech(auto) department, exhaust gas analyzerportable 5-gas exhaust analyzer for automotive lab usemeasurement of co (0 10%),co (0 20%),hc (0 20000) ppm,o (0 25%),nox (0 5000) ppmgas sampling rate: 1 litre/minresponse time: 5 secondswarm-up time: 3 minutesdisplay: lcdinput: membrane keypadoperating temperature: 0 50 cpower consumption: 25 w, operates on 230v ac / batterysupplied with sampling probe, filters, and carrying case
Tender For corrigendum : tender for supply of co analyzer - co analysers along with accessories and commissioning spares for unit7 as per boq line item 1 , mandatory spares for co analysers of unit7 as per boq line item 2 , co analysers along with accessories and commissioning spares for unit8 as per boq line item 3 , mandatory spares for co analysers of unit8 as per boq line item 4 , co analysers along with accessories and commissioning for unit9 as per boq line item 5 , mandatory spares for co analysers of unit9 as per boq line item 6 , inst/commsng assist for co analyser for unit7 as per boq line item7 , inst/commsng assist for co analyser for unit8 as per boq line item8 , inst/commsng assist for co analyser for unit9 as per boq line item9
Tender For purchase of lab equipments for heat power engineering lab and 3d printer for mech department - five gas analyzer (exhaust gas)* portable 5-gas exhaust analyzer for automotive lab use * measurement of co (0 10%), co (0 20%), hc (0 20000 ppm), o (0 25%), nox (0 5000 ppm) * gas sampling rate: 1 litre/min * response time: 5 seconds * warm-up time: 3 minutes * display: lcd * input: membrane keypad* operating temperature: 0-50 c * power consumption: 25 w, operates on 230v ac / battery * supplied with sampling probe, filters, and carrying case, 3 d printing machine build volume(wxdxh) 256 x 256 x 256 mm shell enclosed (plastic & glass) hot end all metal nozzle 0.4 mm stainless steel included max hot end temperature 300 nozzle diameter 0.4 mm (included) 0.2 mm, 0.6 mm, 0.8 mm build plate compatibility textured pei plate, cool plate, engineering plate, high temperature plate max build plate temperature 100 max speed of tool head 500 mm/s max acceleration of tool head 20 m/s supported filament pla, petg, tpu, pva, pet, abs, asa chamber monitoring camera low rate camera 1280 x 720/0.5fps timelapse supported filament run out sensor :yes control board fan closed loop control auxiliary part cooling fan closed loop control air filter activated carbon filter
Tender For purchase of non consumable item in thermal lab for mechanical department - open type air conditioning system kitcode - (d030)1.5 ton1. compressor type:open type capacity:0.5 tr to 1tr power 1 hp supply 230 v,single phase 50 hz2.condenser type: air cooled condenser material : copper tube with aluminium fins fan motor:230 v ac3.evaporator type :open fin type material : copper air circulation : blower assisted mounted openly for observation4. blower/fan type: centrifugal blower air flow : adjustable power:230 v ac5. refrigeration type : r226. measuring instruments pressure gauges: low&high pressure temperature:thermometers,digital sensors voltmeter : 0 to 300 v ammeter : 0 to 10 a temperature display : at inlet and outlet points energy meter: single phase, exhaust gas analysercode - (d037)to find the percentage of co,co2, o2, amount of hc and nox using exhaust gas analyzer. afr and lammda are measurable.