Latest digital printing item Tenders | Government digital printing item Tenders

Central Government/Public Sector

CTN :43252735

29 Dec, 2025 NA

Jhansi - Uttar Pradesh

Tender For supply of ballast pocket assy-i as per drawing no- 27193106000 rev 02 (item sl no- 001 to 009) , ballast pocket assy-ii as per drawing no- 27193106001 rev 02 ( item sl no- 001 to 008) , ballast pocket assy-iii as per drawing no- 27193106002 rev 02 (item sl no- 001 to 010) , ballast pocket assy-iv as per drawing no- 27193106003 rev 01 ( item sl no- 001 to 008)

Central Government And Public Sector

CTN :43095507

05 Jan, 2026 21.95 Lacs

East Singhbhum - Jharkhand

Tender For corrigendum : tender for supply of operation and comprehensive maintenance of ems at kadma te build jsr d d - as per item no-1 of sh-i sor in sec-3 part c of atc , replacement 100amps 4 pole isolator , replacement 63amps 4 pole mcb , replacement 32amps 3 pole mcb , replacement 40-63amps dp mcb , replacement 6-32a spmcb , replacement 100 amps 415v hrc fuse links- din type , replacement 125 amps 415v hrc fuse links- din type , replacement 63 amps 415v porcelain fuse unit , supplying and drawing 3x1.5sqmm wireing , supplying and drawing 2x1.5sqmm , supplying and drawing 3x4.0sqmm , sf pvc junction box along with 150 amp 4 way connectors , suppllying xlpe 1.1 kv al 4x10 sqmm cable , suppllying xlpe 1.1 kv al 2x6 sqmm cable , laying of xlpe cable in ground , laying of xlpe cable on wall surface , laying of cable existing rcc/ hume/ metal pipe , sh 40 mm dia g.i pipe medium class ias per nit. , sm end term with brass gland and alum lugs 4 x 10 sq. mm , sm end term with brass gland and alumi lugs 2 x 6 sq. mm , repl. 63 amps 415 volts tpn sdfu with hrc fuses , repl. 125 amps 415 volts tpn sdfu with din type hrc fuses , repl. 250amps 415 volts tpn sdfu with din type hrc fuses , repl. 400a fp mccb , 36ka overload rel , repl 63 amps 415 volts tpn sdfu in sheet , s/f 36 /40-watt fluorescent tube rods , s/f starter for fl. fittings , s/f 9 /10-watt led lamp (b22) , s/f 12/15-watt led lamp (b22/e27) , s/f 20/22w ultra bright led retrofit tube light , s/f 24w led battype with very high eff 115 lm/w , replacement angle/batten holder , replacement 36/40 w fl tube light holder , replacement 36/40 w fl tube light starter , replacement ceiling rose , replacement 5/6amps 250 volts 3 pin plug top , 15/16amps 250 volts 3 pin plug top , replacement 6 /10 amps 1 way piano type switch , replacement 16 amps 1 way piano type switch , replacement 6 amps 3 pin type socket , replacement 16 amps 3 pin type socket , rewinding of 1200mm/1400mm ceiling fan etc. as required. , repl stepped type electronic fan regulator (switch type) , rep 2.25 mfd 440 volts capacitor for ceiling fan , bearings for ceiling fans etc. as required (make skf/ss) , rewinding 380mm 1500 rpm 230 v heavy duty exhaust fans , supply and replacement of 45 watt street light , supply and replacement of 27 watt street light , dehyd filt & testing of existing trasformer , supplying of new transformer oil , replacement gasket of transformer , replacement lt side stud bush , painting of transformer with good quality synthetic paint , s/f diesel filter with o ring (primary) 160kva d e/a set , s/f lub oil filter with o ring 160kva d e/a set , s/f diesel filter with o ring (secondary) 160kva d e/a set , s/f engine oil(mobil) 160kva d e/a set , sevicing by authorised dealer /oem for160kva dg set

Central Government And Public Sector

CTN :43101234

05 Jan, 2026 16.36 Lacs

Dhanbad - Jharkhand

Tender For corrigendum : tender for supply of item no-1 of sh-i sor in sec-3 part c of atc , replacement 100amps 4 pole isolator , replacement 63amps 4 pole mcb , replacement 32amps 3 pole mcb , replacement 40-63amps dp mcb , replacement 6-32a spmcb , replacement 100 amps 415v hrc fuse links- din type , replacement 125 amps 415v hrc fuse links- din type , replacement 63 amps 415v porcelain fuse unit , supplying and drawing 3x1.5sqmm wireing , supplying and drawing 2x1.5sqmm , supplying and drawing 3x4.0sqmm , repl. 63 amps 415 volts tpn sdfu with hrc fuses , repl. 125 amps 415 volts tpn sdfu with din type hrc fuses , repl. 250amps 415 volts tpn sdfu with din type hrc fuses , repl 63 amps 415 volts tpn sdfu in sheet , s/f 36 /40-watt fluorescent tube rods , s/f starter for fl. fittings , s/f 9 /10-watt led lamp (b22) , s/f 12/15-watt led lamp (b22/e27) , s/f 20/22w ultra bright led retrofit tube light , s/f 24w led battype with very high eff 115 lm/w , replacement angle/batten holder , replacement 36/40 w fl tube light holder , replacement 36/40 w fl tube light starter , replacement ceiling rose , replacement 5/6amps 250 volts 3 pin plug top , 15/16amps 250 volts 3 pin plug top , replacement 6 /10 amps 1 way piano type switch , replacement 16 amps 1 way piano type switch , replacement 6 amps 3 pin type socket , replacement 16 amps 3 pin type socket , rewinding of 1200mm/1400mm ceiling fan etc. as required , repl stepped type electronic fan regulator (switch type) , rep 2.25 mfd 440 volts capacitor for ceiling fan , bearings for ceiling fans etc. as required (make skf/ss) , rewinding 380mm 1500 rpm 230 v heavy duty exhaust fans , s/f diesel filter with o ring (primary) 200kva dg , s/f lub oil filter with o ring 200kva dg , s/f diesel filter with o ring (secondary) 200kva dg , s/f engine oil(mobil) 200kva dg , sevicing by authorised dealer /oem for 200kva dg set , s/f diesel filter with o ring (primary) 160kva dg , s/f lub oil filter with o ring 160kva dg , s/f diesel filter with o ring (secondary) 160kva dg , s/f engine oil(mobil) 160kva dg , sevicing by authorised dealer /oem for 160kva dg set

CTN :43206378

26 Dec, 2025 1.89 Lacs

Chandigarh - Chandigarh

Tender For maintenance of e.i in rb at chandigarh.(providing lawn lights in house no. 68 (type-dmh) sector-7, chandigarh. (e.i. wrok). - dsr item no. 1.10 wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm frls pvc insulated copper conductor single core cable in surface / recessed medium class pvc conduit, with modular switch, modular plate, suitable gi box and earthing the point with 1.5 sq.mm. frls pvc insulated copper conductor single core cable etc as required., group b, dsr item no.1.31 supplying and fixing suitable size gi box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 a modular socket outlet and 5/6 a modular switch, connections etc. as required., dsr item no.1.32 supplying and fixing suitable size gi box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 a & 15/16 a modular socket outlet and 15/16 a modular switch, connections etc. as required., dsr item no. 1.17 supplying and drawing following sizes of frls pvc insulated copper conductor, single core cable in the existing surface/ recessed steel/ pvc conduit as required., 3 x 1.5 sq. mm, 3 x 2.5 sq. mm, dsr item no.1.21 supplying and fixing of following sizes of medium class pvc conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required., 20 mm, 25 mm, dsr item no. 1.33 supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden block including connection etc as required., dsr item no.1.26 supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required., dsr item no.1.25 supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required., dsr item no. 2.16 supplying and fixing dp sheet steel enclosure on surface/ recess along with 25/32 a 240 v "c" curve dp mcb complete with connections, testing and commissioning etc. as required., dsr item no. 8.9.5led batten light (system lumen efficacy 105 120 lm/watt)supplying, installation, testing & commissioning of led surface mounted batten light of following body material and construction as per is : 10322 with driver (replaceable) as per the requirement with driver efficiency >85%, (as per complete item no. 10 of the dnit)., 18- 22 watt, supply and erection of b.l. holder of make anchor panta / havells reo/ gold medal essenza isi marked on existing jn. box / wooden block including making connection etc as required., s/e of led bulk head luminaries weather proof frosted light with pmma / pc reflector and silicon gasket to be installed on surface. the led fitting should have minimum system lumen output minimum 1000 lumen and the driver of the fitting should be workable on 140-260 volt. (as per complete item no. 12 of the dnit)., supply & laying of pvc copper wire 1.5mm sq. 3 core round sheathed wire on existing surface with suitable clamps/ hanger etc. including making connection and petty material etc. as required to complete the job to the entire satisfaction of engineer-in-charge. the copper wire should be of polycab/ l&t/ havells/ finolex/ r.r. kables make only., supply & erection of fresh air fan high speed motor with copper wound 10 sweep with louver and plastic body complete with high speed motor, blades, epoxy powder coated of havells make ventiliar dx white / orient make ventilator / crompton make brisk air/ bajaj make 70049 250mm sweep only. (as per complete item no. 14 of the dnit)., s/e of led 8w/ 9 w. bollard fitting. the bollard should be approximately (800 mm long and 200 mm wide) from the top of the fitting. the bollard should be made out of extruded aluminium profile and die cast aluminium base with pmma/ opal diffuser bollard painted with superior quality of paint. (as per complet

CTN :43208516

24 Dec, 2025 2.13 Lacs

Chandigarh - Chandigarh

Tender For maintenance of e.i in rb at chandigarh. (addition/ alteration of e.i in house no. 83, sector-23, house no. 320 and 3947, sector-22, chandigarh). - dsr item no. 1.15rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm frls pvc insulated copper conductor single core cable and 1.5 sq.mm. frls pvc insulated copper conductor single core cable as earth wire in existing surface/ recessed steel /pvc conduit including dismantling as required., group a., group b., dsr item no. 2.18 supplying and fixing 20amps, 240 volts, spn industrial type, socket outlet, with 2 pole and earth, metal enclosed plug top along with 20 amps c curve, sp, mcb, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required., dsr item no. 1.16rewiring for twin control light point with 1.5 sq.mm frls pvc insulated copper conductor single core cable and 1.5 sq.mm. frls pvc insulated copper conductor single core cable as earth wire in existing surface/ recessed steel conduit including dismantling as required., dsr item no. 1.17supplying and drawing following sizes of frls pvc insulated copper conductor, single core cable in the existing surface/ recessed steel/ pvc conduit as required., 3 x 1.5 sq. mm, 3 x 2.5 sq. mm, 3 x 4 sq. mm, dsr item no.1.21supplying and fixing of following sizes of medium class pvc conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required., 25mm, dsr item no.1.23supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required., 5/6 amps switch, 2 way 5/6 a switch, 3 pin 5/6 a. socket outlet, dsr item no. 1.29 supplying and fixing metal box of 150mm x 75mm x 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 3 pin 5/6 amps socket outlet and 5/6 amps piano type switch, connection, painting etc. as required., dsr item no. 1.30 supplying and fixing metal box of 180mm x 100mm x 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 6 pin 5/6 & 15/16 amps socket outlet and 15/16 amps piano type switch, connection, painting etc. as required., dsr item no. 1.33supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden block including connection etc as required., dsr item no.1.38 supplying and fixing call bell/ buzzer suitable for single phase, 230 volts, complete as required., dsr item no.2.3 supplying and fixing following way, single pole and neutral, sheet steel, mcb distribution board, 240 v, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (but without mcb/rccb/ isolator), 12 way, double door, dsr item no. 2.4 supplying and fixing following way, horizontal type three pole and neutral, sheet steel, mcb distribution board, 415 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required (but without mcb/ rccb/ isolator)., 4 way (4 + 12) double door, dsr item no. 2.10 supplying and fixing 5 a to 32 a rating, 240/415 v, 10 ka, "c" curve, miniature circuit breaker suitable for inductive load of following poles in the existing mcb db complete with connections, testing and commissioning etc. as required., single pole, double pole, triple pole and neutral, supply and erection of electronic step type socket type fan regulator in existing b.l. sheet including making connection and petty material reqd. to complete the job. the fan regulator should be of anchor panta / havells reo/ gold medal essenza make only., supply and erection of b.l. holde

Central Government/Public Sector

CTN :43233164

25 Dec, 2025 NA

Raigad - Maharashtra

Tender For notice inviting tender for supply id and fd turbine sapres of ammonia plant - item no: 1, spring for turbine type ho-183r, drawing no. 21909-0001, order no. nic-2a-21909, 21910, item no. tk- 201/202 part no. 9, material swpb, m/sshin nippon machinery co. ltd, plate spring for turbine type ho-183r, drawing no. 21909-0001 order no. nic-2a-21909, 21910 item no. tk- 201/202 part no. 12 material sup3 m/s shin nippon machinery co. ltd, deflector for turbine type ho-183r, drawing no. 21909-0001, order no. nic-2a-21909, 21910, item no. tk-201/202, part no. 51, m/s shin nipponmachinery co. ltd, packing box governer side 2t-2y0427-1a 1, 2 of turbine type ho-183r, drawing no. 21909-0001, order no. nic-2a-21909, 21910, item no. tk-201/202, part no. 52, material s25c. m/s shin nippon machinery co. ltd, packing box coupling side 21909-0427a 1, 2 of turbine type ho-183r, drawing no. 21909-0001, order no. nic-2a-21909, 21910, item no. tk- 201/202, part no. 52, material s25c. m/s shin nippon machinery co. ltd, labyrinth packing for turbine type ho-183r, drawing no. 21909-0001, order no. nic-2a-21909, 21910 item no. tk-201/202, part no. 54 and 57, material pbc3. m/s shin nippon machinery co. ltd, labyrinth sleeve for turbine type ho-183r, drawing no. 21909-0001, order no. nic-2a-21909, 21910, item no. tk-201/202, part no. 55, materials45c, m/s shin nippon machinery co. ltd, labyrinth sleeve for turbine type ho-183r, drawing no. 21909-0001, order no. nic-2a-21909, 21910, item no. tk-201/ 202, part no. 56, material s45c. m/s shin nippon machinery co. ltd, deflector turbine type ho-183r drawing no. 21909-0001 order no. nic-2a- 21909, 21910 item no. tk-201/ 202 part no. 61 material s35c. m/s shinnippon machinery co. ltd, oil shelter for turbine type ho-183r, drawing no. 21909-0001, order no. nic-2a-21909, 21910, item no. tk-201/ 202, part no. 62, material a5083 m/s shin nippon machinery co. ltd, baffle plate for turbine type ho-183r, drawing no. 21909-0001, order no. nic-2a-21909, 21910, item no. tk-201/202, part no. 63, material 5083, m/s shin nippon machinery co. ltd, coupling for governing system assembly turbine type ho-183r drawing no. sd-6403 order no. nic-2a-21909, 21910 item no. tk- 201/202 part no. 451, 477 material a4041 m/s shin nippon machinery co. ltd, valve sheet for emergency stop valve for turbine type ho-183r, drawing no. sd-6403, order no. nic-2a-21909, 21910, item no. tk- 201/202, partno. 504, material scs1, m/s shin nippon machinery co. ltd, valve desk for emergency stop valve for turbine type ho-183r, drawing no. sd-6403, order no. nic-2a-21909, 21910, item no. tk- 201/202, partno. 503, 505, 532, material scs1, m/s shin nippon machinery co. ltd, liner for governing valve for turbine type ho-183r, drawing no. sd-6403, order no. nic-2a-21909,21910, item no.tk- 201/202, part no. 405,material sus403, m/s shin nippon machinery co. ltd

Central Government/Public Sector

CTN :43200585

26 Dec, 2025 NA

Mumbai - Maharashtra

Tender For supply of flexible grease pipe as per drawing no. e 4200178 rev. 07. item no. 12

Central Government/Public Sector

CTN :43246734

12 Jan, 2026 NA

Ajmer - Rajasthan

Tender For supply of switch plate assembly complete along with mobile charging socket for lhb non-ac chair car(lwscz) as per specification no.edml-125, rev-6, table-1(1 set comprising 20 nos. switch plate as per drawing no.cc74252, alt-c and 20 nos. switch plate as per drawing no. cc74247, alt-g, item-3).'

Central Government/Public Sector

CTN :43246516

09 Jan, 2026 NA

Ajmer - Rajasthan

Tender For supply of adjusting piece for brake head to icf drg no. t-3-1-619 alt e/2 item no. 9 & 10 ( qty. 50% for item-9 and 50 % for item-10 of total quantity) material and specification as per drawing.

Central Government/Public Sector

CTN :43247357

05 Feb, 2026 NA

Lucknow - Uttar Pradesh

Tender For supply of lavatory door arrangement for ac coaches. ( rh. & lh 50% each)drawing no:- icf/std-5-6-011, alt (c) items as per col. i & ii ( 50% each) color /shade of item no.-2 (panel) %u2013 as per sample code no. ac sp 02

Digital Printing Item Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors