Latest digital temperature indicator Tenders | Government digital temperature indicator Tenders

CTN :45475064

15 Jun, 2026 NA

Chennai - Tamil Nadu

Tender For purchase of non-consumables for mechanical department - purchase, open cup apparatus standard compliance: astm d92 / is 1448 (part 69) test method: open cup flash and fire point determination test cup: brass, precision machined with heat resistant handle heater: electric heater (1000 w 10% nickel chromium) with variable control heating rate: 5 6 c per minute (as per standard) temperature range: -6 to 400 c thermometer: astm 11c or equivalent flame applicator: gas test flame with fine control valve body: stainless steel housing display: analog / digital temperature indicator power supply: 230v ac, 50 hz safety: overheat protection heat insulation, closed cup apparatus standard compliance: astm d93 / is 1448 (part 21) test cup:brass cup diameter: 50.7 50.8 mm capacity: minimum 70 ml stirring system heater: electric heater 650 w 10% heating rate: 1 12 c/min adjustable ignition: pilot flame with automatic shutter mechanism temperature measurement: thermometer or digital sensor(ip-28c or astm) display: digital temperature display power supply: 230v ac, 50 hz safety: over-temperature cut-off flame safety control

CTN :44801778

10 Jun, 2026 NA

Angul - Odisha

Tender For bid to ras supply of spares of m/s super scientific works pvt ltd make 50 ltr reflux reaction distillation unit - 50 ltr. spherical vessel - reactor with centre: dn 150, side: dn, 00/45º x 1 no, dn 40 x 3 nos, bottom: dn 50/40 (for bath & flush bottom), 20 ltr. graduated vessel receiver flask, graduated c-25, s- 25 x 2nos, b-25, 20 ltr.graduated vessel addition flask graduated with c- b 55 with stopper, s-25 x 2, b-25, glass heat exchanger coil type dn 100/0.5 hta: 0.5 m.sq., 610 mm lg., product cooler size dn 25/80/0.2 m², glass column scetion with glass rasching ring and 2 nos ptfe perforated, packing support, 2 nos. of glass stirrer with teflon half moon blade for 50 ltr. flask, glass thermowell & dip pipes, glass pipes & fittings, glass valves - flush bottom, line, drain. angle, vent valves etc, ptfe line bellow with ci bellow flanges, ci i. nges with insert gasket, nut bolt & ptfe 'o' ring, chuck & seal assembly with mechanical seal for 50ltr., multipurpose heating ms cooling bath with ms coil & insulation with, aluminium screwed cladding flame proof heater for 50 ltr. 4kw, 3 phase, 415v, flameproof electric motor with suitable gear box, 0.5hp,180 rpm., flame proof vfd 0.5 hp, flp panel consists of 2 point digital temperature indicator for reactor temp, and reflux temperature & digital temperature indicator cum controller for bath., 03 nos. of flame proof rtd for heater, bath & rda., gi tubular supporting structures powder coated

Co-operative

CTN :45444048

20 Jun, 2026 NA

Udhamsign Nagar - Uttarakhand

Tender For instrument spare and annual maintenance contract - circular charts:-i) cc-200 (fc-261)range 0-100, ii) 9/d/179/fc-241, range 0-600, iii) 9/d/147/s-8963, range 0-150, iv) 9/d/112/s-3452, range 0-30, disposable pen (red), temperature gauge dial size 6" (h guru) heavy duty with test certificate (mercury filed) :-i) range 0-150 c streight steam 6", ii) range- 0-150 c capillary type (3 meter) bulb length 10" copper/pvc, iii)range 0-300 c streight steam 6", iv) range 0-500 c streight steam 6", vacuum gauge dial size 6" range- 0-30 inch of hg/760 mm bottom feed connection 3/8" bsp, h guru heavy duty with test certificate., pressure gauge dial size 6" bottom feed connection size 3/8" or 1/2" bsp, h guru heavy duty with test certificate :-i) range 0-15 psi 01 kg/cm , ii) range 0-30 psi 02 kg/cm , iii) range 0-60 psi 04 kg/cm , iv) range 0-150 psi 10 kg/cm , v) range 0-300 psi 21 kg/cm , vi) range 0-1030 psi 42 kg/cm /70 kg/cm , pressure gauge, dial size 10" bottom feed connection size 1/2" bsp heavy duty with test certificate:-i) range 0-60 kg/cm h. guru with test certificate, ii) range 0-2 kg/cm2 h. guru with test certificate, pressure gauge for turbines heavy duty with test certificate:-i) 4" dial size side back connection %" bsp range 0-2 kg/cm , ii) 4" dial size side back connection %" bsp range 0-4 kg/cm , iii) 4" dial size side back connection %" bsp range 0-7 kg/cm , iv) 4" dial size side back connection %" bsp range 0-10 kg/cm , teflon coated compensating cable 2 core j type, compensating cable fg/ss 2-core k type, 4 digit digital temperature indicator j & k typ , thermocouple sensor heavy duty:-i. 12" x 8 mm j/k type, ii. 8" x 8 mm j/ k type, iii. 6" x 6 mm j/k type, oil pocket ss 12", 6 digit digital event counter, proximity switch (magnetic sensor) pnp-nc sensing 8 mm,voltage 5-35 vdc, max load 300 ma, on/off pneumatic control valve flange type size- 1" to operate at air pressure 60-80 psi suitable for 20 kg/cm line pressure, on/off solenoid valve for pneumatic valve:-a) air filter " line size female thread, b) air filter with air regulator size 4", digital temperature controller (pid) j & k type, digital tachometer range 0-10000 rpm, 96 x 96 with magnetic sensor., steam flow indicator cum totalizer, drum level controller 4-20 ma input/output model no. 5296at (massibus make), dp transmitter 4-20 ma for boiler drum level, honybell make, positioner for drum level control valve, stroke counter for molasses tank, jumbo digital display with sensor, for juice and water tank, current and previous display size 4" x 4"., ma & mv source meter for temp. indicator calibration, pressure transmiter model tsc 01, range 0 to 40 bar, output 04-20 ma, accuracy 0.25% fs, pressure transmiter model ks-e-e-e b02u-m-v, range 0 to 2 bar, output 04-20 ma, supply 9-32 vdc, port g1/4e, syphon pipe s.s. 304 :-(i) u type, (ii) q type, pressure gauge, model en837-1, ss-316, dail size 6", bottom feed connection size 1/2" bsp, heavy duty with test certificate (tempsens make) :-i) range 0-6 kg/cm , ii) range 0-10 kg/cm , iii) range 0-21 kg/cm , iv) range 0-42 kg/cm , pid controller, size 96 96, model no. dc 1040, make honey bell, pressure recorder range, h-guru make, with test certificate (heany duty) with pipe stand mounted ", socket- ", size 10" :-(i) 0-1 kg./cm2, (ii) 0-2 kg./cm2, (iii) 0-10 kg./cm2, orifice with assembly (nipple), inlet pressure 21 kg/cm , outlet pressure 21 kg/cm , inlet temp. 350 c, outlet temp. 350 c, line size 4", drum level transmitter, range 400 to 400 in h2o, (make- honey bell), steam pressure transmitter, range 14.7 to 3000 psi, (make- honey bell), hade mounted thermocouple, length 450 mm, k-type duplex type, with test certificate (heany duty), signal isolator singal input 4-20ma, double output 4-20ma, repair & calibration work with amcsuper-heated wash water temp. controlling system- 01 no., d-super heated exhaust steam temp. controlling system- 01 no., temperature control system of transit heater for c/f machin

CTN :45404122

09 Jun, 2026 NA

Palacode - Tamil Nadu

Tender For supply of equipment for mechanical engineering department - supply of equipment for mechanical engineering department, lathe machine :specification :bed: 2v & 2 flat, induction hardened and ground minimum bed length: 1375 mm bed width: 240 mm capacity: height of centre: 165 mm swing over bed: 320 mm swing over gap: 510 mm swing over cross slide: 180 mm distance between centres: 650 mm slides: cross slide travel: 200 mm compound slide travel: 115 mm spindle: spindle bore: 40 mm spindle nose: thread type, 62 mm spindle taper: mt-3 tail stock: quill diameter: 38.1 mm taper: mt-3 travel: 120 mm speed: no. of speeds: minimum 8 range: (40 800 )rpm threading: metric: (1 6 )mm (min 13 steps) english: (2 24 )tpi (min 19 steps) lead screw: (1 4) tpi electrical: motor: 1.5 hp, 230v/415v, 50 hz drive: v-belt structure: bed: close-grained cast iron (fg 260) gears: hardened steel base: rigid cast iron stand , open cup apparatus :specification :standard compliance: astm d92 / is 1448 (part 69) test method: open cup flash and fire point determination test cup: brass, precision machined with heat resistant handle heater: electric heater (1000 w 10% nickel chromium) with variable control heating rate: 5 6 c per minute (as per standard) temperature range: -6 to 400 c thermometer: astm 11c or equivalent flame applicator: gas test flame with fine control valvebody: stainless steel housing display: analog / digital temperature indicator power supply: 230v ac, 50 hz safety: overheat protection heat insulation , closed cup apparatus :specification :standard compliance: astm d93 / is 1448 (part 21) test cup:brass cup diameter: 50.7 50.8 mm capacity: minimum 70 ml stirring system heater: electric heater 650 w 10% heating rate: 1 12 c/min adjustable ignition: pilot flame with automatic shutter mechanism temperature measurement: thermometer or digital sensor(ip-28c or astm) display: digital temperature display power supply: 230v ac, 50 hz safety:over-temperature cut-off flame safety control , tail stock assembly :specification :medium-duty tailstock assembly for dismantling & assembly quill stroke: minimum 75 mm taper: mt-3 (preferred standard) feed: hand wheel operated features: set-over screws for taper turning spindle locking arrangement body: cast iron (fg 260) spindle: hardened steel, slip gauge :specification :set size: m87 (87 pieces) or equivalent range: 1.001 mm to 100 mm step sizes: 0.001 mm 0.005 mm 0.01 mm material: high-grade alloy steel / tungsten carbide (preferred) hardness: hrc 63 65 accuracy: grade: grade 1 or grade 2 flatne flatness / parallelism: 0.5 m stored in protective wooden boxes to prevent wear; calibration grades include charts for exact sizes , dc motor:specification :type: dc shunt motor (dismantling model) power: minimum 0.5 hp voltage: 220 v dc speed: 1500 rpm poles: 4 pole construction: laminated stator salient poles accessible armature features: cut section / open type suitable for dismantling and reassembly, hydraulic cylinder :specification :bore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steel calibration grades include charts for exact sizes supply: mounted on training base suitable for dismantling and inspection , hydraulic operated directional control valves (dcv):specification :type: manual spool type dc valve configuration: 4/2 way size: ng06 (cetop 3) rated pressure: 210 bar flow capacity: 20 40 lpm body: hardened steel / cast steel spool: ground and hardened ports: clearly marked (p, a, b, t) supply: mounted on training plate suitable for dismantling and study , bearing with shaft assembly :specification :bore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steelsupply:mounted on training base suitable for dismantling and inspection , coupling unit using driving and dr

Central Government And Public Sector

CTN :45370557

10 Jun, 2026 NA

Multi City - Multi State

Tender For supply of digital temperature controllers cum indicators , microprocessor based digital temperature indicator cum controller

CTN :45346428

15 Jun, 2026 NA

Madurai - Tamil Nadu

Tender For purchase of renewable energy practical equipments - equipments for renewable energy practices:, rc phase shift oscillator oscillator type: rc phase shift oscillator using transistor / op-amp configuration. input supply: 230 v / 50 hz ac with regulated internal dc supply. output frequency range: 100 hz 10 khz adjustable. output: sinusoidal waveform with adjustable amplitude up to 10 vpp. rc network: three-stage rc phase shift network with frequency control arrangement. cro test points: dedicated cro terminals at amplifier output, each rc stage, and final output for waveform and phase-shift observation. protection: over-voltage and short-circuit protection provided. indicators and controls: power on led indication with frequency and gain adjustment controls. accessories: patch cords, circuit diagram, strain guage characteristics kitac mains power supply: 230 v 10%, 50 hz metal foil strain gauge mounted on beam/cantilever. strain measurement under applied load. wheatstone bridge arrangement. signal conditioning and amplification circuit. instrumentation amplifiers with 3 digit display for strain / output voltage. zero and gain adjustment controls. provision for applying calibrated loads. table-top trainer with labelled panel. test points for signal measurement. built-in dc power supplies and wooden closed cabinet. supplied with patch cords, load cell characteristics kit input supply: 230 v / 50 hz ac with regulated internal dc supply. sensor: strain gauge load cell with suitable mounting arrangement. load range: 0 10 kg. display: digital display for load/output indication. cro / test points: test points provided for observing bridge output, amplifier output, and signal conditioning stages. controls: zero adjustment and calibration controls provided. protection: overload and short-circuit protection provided. accessories: loading arrangement, connecting leads., measurement of tank level using rotometer input supply: 230 v / 50 hz ac with regulated internal dc supply. tank arrangement: transparent tank with 30 liters capacity with suitable supporting stand. rotameter range: 0 4000 l/hr calibrated rotameter. flow system: pump, control valves, and piping arrangement provided for continuous flow operation. measurement facility: provision for flow-based tank level measurement and observation. display / observation: calibrated level indication with flow monitoring arrangement. test points: output terminals provided for monitoring sensor/output signals. accessories: connecting tubes., measurement of tank level using displacer type level transmitter input supply: 230 v / 50 hz ac with regulated internal dc supply unit. measurement principle: buoyancy (archimedes principle) using displacer element. tank arrangement: transparent experimental tank with 30 liters capacity and suitable mounting stand. level range: suitable laboratory-scale level measurement (0 100% tank height). sensor system: displacer type level transmitter with continuous level output signal. display unit: digital indicator for level display in percentage / engineering units. output signals: standard analog output (4 20) ma / (0 10) v provided for monitoring. test points: provided for transmitter output, signal conditioning, and display unit verification. controls: zero and span calibration adjustment provided for setting level reference. protection: over-voltage and short-circuit protection for electronic modules. accessories: connecting cables, piping arrangement, loading medium (water), measurement of temperature using pt100 input supply: 230 v / 50 hz ac with regulated internal dc power supply unit. sensor: pt100 resistance temperature detector (rtd) probe with stainless steel sheath. measurement principle: resistance variation of platinum element with temperature. temperature range: 0 c to 150 c (or suitable laboratory range). display unit: digital temperature indicator with direct c display. accuracy: high accuracy with linearized rtd signal conditioning circuit. sign

CTN :45351359

04 Jun, 2026 NA

Pudukkottai - Tamil Nadu

Tender For supply of lab equipments - purchase of lab equipments, four stroke petrol engine test rig specifications: single cylinder, 4-stroke spark ignition, petrol engine. air cooled rope brake arrangement with spring balance for loading . speed :1500 3500rpm power 3 hp. panel board for measuring speed with power supply and tacho generator setup, burette with tank assembly. load test test rig kit . heavy-duty fabricated ms base frame anti-vibration mounting arrangement powder-coated / painted finish , saybolt viscometer apparatus specifications: glass type: high-quality borosilicate glass tube. control type: manual energy regulator control. shape: rectangular bath with cylindrical test chamber. temperature range: ambient to 240 c oil bath temperature. humidity: up to 80% rh (non-condensing). power supply: 230 v ac, 50 hz. measuring range: 32 to 1000 sus(saybolt universal seconds). accuracy: as per astm d-88( 0.2 seconds). mounting type:benchtop. capacity:one cup(approximately 60 ml). control mode:manual operation. port size:standard orifice sizeas per astmd-88. features:oil bath with heater, thermoregulator, insulated outer body, orifice, receiver flask., cleveland open cup (coc) apparatus specifications: standard compliance: astm d92 / is 1448 (part 69) test method: open cup flash and fire point determination test cup: brass, precision machined with heat resistant handle heater: electric heater (1000 w 10% nickel chromium) with variable control heating rate: 5 c per minute (as per standard) temperature range: (-6 to 400) c thermometer: astm 11c or equivalent flame applicator: gas test flame with fine control valve body: stainless steel housing display: analog / digital temperature indicator power supply: 230v ac, 50 hz safety: overheat protection heat insulation, pensky-martens closed cup apparatus specifications: standard compliance: astm d93 / is 1448 (part 21) type: pensky-martens closed cup (motorized, digital type preferred) test cup: brass cup diameter: 50.7 50.8 mm capacity: minimum 70 ml stirring system: heater: electric heater 650 w 10% heating rate: 1 12 c/min adjustable ignition: pilot flame with automatic shutter mechanism temperature measurement: thermometer or digital sensor(ip-28c or astm) digital temperature display power supply: 230v ac, 50 hz safety: over-temperature cut-off flame safety control

CTN :45333373

10 Jun, 2026 3.33 Crore

Muzaffarnagar - Uttar Pradesh

Tender For supply of interactive panels with cpu (q2) , professional large format display (v2) (q2) , weighing machine , mill house , fully automatic jaggery production unit , solar panel foundation and all related items , structure of complete plant , bought out for complete plan , erection of mill house and boiling house , hdg set , submersible , fire fighting equipment , hcl kit single , oilfree 15 com , air filter , cylinder c2h2 , regulator c2h2 , hood aas , vacuum hot air oven , digital hot air oven , air circulation fan , microprocessor digital temperature indicator , digital timer , heating mantle , digital muffle furnace , single beam uv , double beam uv , digital photo colorimeter , weighing balance , analytical balance cy , water bath , pid temperature controller , atomic absorption spectrophotometer , gas chromatography , fused silica capillary column , gas purification panel , electromechanical voltage stabilizer , carbon steel cylinder , pressure regulator , glassware , servo candy pillopack wrapping machine , horizontal flow wrapepillopack high speed packaging machine , automatic packing machine , vertical single face paper corrugating machine , corrugated sheet pasting machine , eccentric slotter machine , bar rotary cutting creasing machine , stitching machine , paper reel to sheet cutting machine , flexo graphic printing machine , printing machine , manual jar filling machine , manual pouch sealing machine , manual sticker labelling machine , bag sewing machine , bar coding equipment , bar reader machine , projector , laptop , public address audio system , pantry , desktop with accessorie , tv 45 inch screen , solar panel , bio fertilizer plant , cctv unit for control ) /bid number : gem/2026/b/7564787 * /dated: 26-05-2026 & & / bid document 1 / 42

Central Government/Public Sector

CTN :45262201

02 Jun, 2026 NA

Erode - Tamil Nadu

Tender For supply of digital temperature indicator (q3)

CTN :45200734

29 May, 2026 NA

Bazpur - Uttarakhand

Tender For supply of instrument spares in sugar mill - pressure gauge, complete s.s., bourdon tube type range- 0 to 30 psi, 3/8 or bsp bottom fitting, make waaree/radix. isi/iso standard a. dial size-4 , b. dial size- 6 isi/iso standard, c. dial size- 8 isi/iso standard, d. dial size- 10 isi/iso standard, pressure gauge, complete s.s., bourdon tube tipe range- 0 to 15 psi, 3/8 or bsp bottom fitting, isi/iso standard. a. dial size-4 , b. dial size- 6 isi/iso standard, c. dial size- 8 isi/iso standard, d. dial size- 10 isi/iso standard, pressure gauge, complete s.s., bourdon tube tipe range- 0 to 100 psi, 3/8 or bsp bottom fitting, isi/iso standard. a. dial size-4 , b. dial size- 6 isi/iso standard, c. dial size- 8 isi/iso standard, d. dial size- 10 isi/iso standard, pressure gauge, complete s.s., bourdon tube tipe range- 0 to 300 psi, 3/8 or bsp bottom fitting, isi/iso standard a. dial size-4 , a. dial size-4 isi/iso standard, b. dial size- 6 isi/iso standard, c. dial size- 8 isi/iso standard, d. dial size- 10 isi/iso standard, pressure gauge, complete s.s., bourdon tube tipe range- 0 to 600 psi, 3/8 or bsp bottom fitting, isi/iso standard a. dial size-4 , b. dial size- 6 isi/iso standard, c. dial size- 8 isi/iso standard, d. dial size- 10 isi/iso standard, pressure gauge, complete s.s., bourdon tube tipe range- 0 to 150 psi, 3/8 or bsp bottom fitting, isi/iso standard a. dial size-4 , b. dial size- 6 isi/iso standard, c. dial size- 8 isi/iso standard, d. dial size- 10 isi/iso standard, master gauge accuracy- 0.5%, dial size-150 mm, dial with antiparallax mirror, knife edge pointer isi/iso standard a. range- 0 to 30 psi, b. range- 0 to 100 psi isi/iso standard, c. range- 0 to 300 psi isi/iso standard, d. range- 0 to 600 psi isi/iso standard, master gauge accuracy- 0.5%, dial size-250 mm, dial with antiparallax mirror, knife edge pointer isi/iso standard a. range- 0 to 30 psi, b. range- 0 to 100 psi isi/iso standard, c. range- 0 to 300 psi isi/iso standard, d. range- 0 to 600 psi isi/iso standard, compound gauge, complete s.s., range- vacuum- 0 to 30 inch hg.. pressure- 0 to 30 psi., 3/8 or bsp bottom fitting. isi/iso standard . a. dial size- 4 , b. dial size- 6 isi/iso standard, vacuum gauge, complete s.s., bourdon tube tipe range- 0 to 30 inch hg. 3/8 or bsp bottom fitting, isi/iso standard. a. dial size- 4 , b. dial size- 6 isi/iso standard, dial type temperature gauge, complete s.s. mercury in s.s. tube, stem type. (size- 8 mm. dia x 300 mm. length.) range- 0 to 120 c isi/iso standard. a. dial size- 4 , b. dial size- 6 isi/iso standard, c. dial size- 8 isi/iso standard, dial type temperature gauge, complete s.s. mercury in s.s. tube, stem type. (size- 6 mm. dia x 450 mm. length.) range- 0 to 400 c isi/iso standard. a. dial size- 4 , b. dial size- 6 isi/iso standard, c. dial size- 8 isi/iso standard, dial type temperature gauge, complete s.s. mercury in s.s. tube, capillary type. capillary length-2 mtr., sensing dia 6 mm., range- 0 to 120 c isi/iso standard. a. dial size- 4 , b. dial size- 6 isi/iso standard, c. dial size- 8 isi/iso standard, dial type temperature gauge, complete s.s. mercury in s.s. tube, capillary type. capillary length-2 mtr., sensing dia 6 mm., range- 0 to 400 c isi/iso standard . a. dial size- 4 isi/iso standard, b. dial size- 6 isi/iso standard, c. dial size- 8 isi/iso standard, glass thermometer size- 14 isi/iso standard. a. alcohol filled, b. mercury filled. isi/iso standard, digital temperature indicator, mounting size- 96 x 48 mm. isi/iso standard. a. pt-100 type, range- 0 to 200 c, resolution-0.1 c., b. k type, range- 0 to 600 c, resolution-0.1 c. isi/iso standard, c. j type, range- 0 to 600 c, resolution-0.1 c. isi/iso standard, digital temperature indicator, mounting size- 96 x 96 mm. isi/iso standard. a. pt-100 type, range- 0 to 200 c, resolution-0.1 c., b. k type, range- 0 to 600 c, resolution-0.1 c. isi/iso standard, c. j type, range- 0 to 600 c, resolution-0.1 c. isi/iso standard, digital temperature co

Digital Temperature Indicator Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Co-operative

Central Government And Public Sector

Central Government/Public Sector