Latest digital tong tester Tenders | Government digital tong tester Tenders

State Government

CTN :45285975

28 May, 2026 1.21 Crore

Daman - Gujarat

Tender For providing and supplying modular furniture for newly constructed government school building at kachigam, nani daman. - civil works, providing supply and installation of corner sink table -size :-1100mm l x 1100mm d x 900mm hconstruction : floor based welded cabinet system having storage body should be flush face construction with intersection of vertical and horizontal members like lh and rh side panel along with front horizontal channel, back panel and bottom panel. it should be relocated anywhere easily as it is an independent unit. cabinet should of square non-sharp edge construction. doors should be assembled with ss-304 hinge assembly. removable back panel should be provided to easily access the service lines running behind the cabinet benches. intermediate horizontal channels should be provided between door and drawer. toe-space of 90mm x 90mm is provided at front-bottom side of cabinet. levelers are provided for easy leveling of welded cabinet. shelf should be eight-bend panel with 20mm height. drawer tray should be of single piece construction. drawer should be well supported on lh and rh ball slide suspension system. steel door and drawer front should be of double wall construction with sound dampening material filled inside. doors should be easily removable and hinges should be easily replaceable. knee space panel should be in 22 gauge , cabinets are tested as per sefa 8m standard from a sefa approved lab and also tested as per en 14727 from a third party testing agency having nabl accreditation. dimensions : w= 900 mm, d = 900 mm, h = 875 mm configurations: 1 shutter - 1 nos moc: mscrca: is 513 (1994) thickness: lh/rh side panels, shutter front, bottom panel, top front, drawer separator, shelf, alignment channel is of 1.2mm thk. removable back panel, shutter cover, fr. rack strip, top cover panel is of 0.8mmthk. finish: powder coating pure epoxy, thickness 40-50 microns , followed with 9 tank pre treatment process the thickness of powder coat should be 45-50 microns, which passes the test of salt spray for 1000 hours. it should have a high temperature withstanding capacity with excellent electrical insulation properties.the rear portion of above accessories which is in contact with live metal should be made from thermo set material which will not melt on heating.handle : anodized aluminum recessed-type, ctc: 160.0mm lock: units have a locking facility with 180 and 10 lever cam lock mechanism (except for sink and corner unit) hinge: ss hinge screw: ss 304.shutter : should be of twin-type construction with sound dampening effect using profill.shutter cover should be equipped with bump on for sound dampening. base moulding should be made of pvc with corner clips. ball slide: 500mm length shutter should have provision of roller catch.pp sink,polypropylene molded sinks: made up of 5 mm thick high density and elastic poly propylene with good resistance to organic solvents. sink - bowl size to be a minimum of (l x w x d) 560 x 355 x 300 mm.faucet - 3-way type faucet as per approved makeworktop : jet black granite: it should be 19mm (+/- 2mm) thick jet black granite worktop. the exposed edges of the worktop should be chamfered and smoothened. the bottom of the worktop should be polished and there should be a v-groove throughout the length of the exposed edges to protect the cabinets from coming in contact with the spillages. the overhang on the storage cabinet is 25 mm at the front side and 30 mm at the sides. the backing material used is a neoprene mat of 6 mm thickness. (make as per selection of architect or selection of higher authority), providing supply and installation of corner table - size 1100mm l x 1100mm d x 900mm hconstruction: floor based welded cabinet system having storage body should be flush face construction with intersection of vertical and horizontal members like lh and rh side panel along with front horizontal channel, back panel and bottom panel. it should be relocated anywhere easily as it is an indepe

State Government

CTN :45303639

06 Jun, 2026 NA

Ranchi - Jharkhand

Tender For e-quotation for seeking firm rates of plant and machinery and materials category items for preparation/amendment of schedule of rate for the year 2026. - m 1055 - pumps supplying submersible pump sets confirming to is 8034 and motor confirming to is 9283. pump shall be suitable for various delivery head and discharge with stainless steel pump shaft and polypropylene/ noryl impeller. motor suitable for working on 415v+10%, 3ph, 50 hz, a.c. supply with cable guard, thrust carbon/ fiber bearing to withstand entire hydraulic thrust, water proof winding shall be provided. the pump set shall be suitable for direct coupling. pump shall have suitable outlet as per manufacturers design. anti thrust stream lined non return valve shall be provided with pump. 3 meter submersible copper conductor cable in single/ double run shall be provided with each pump., submersible pump set 100 mm dia (with polypropylene/ noryl impeller) up to 20 stages 1 h.p. , 1.5 hp, 2 hp, 2.5 hp, 3.0 hp, 4.0 hp, 5.0 hp, submersible pump 150 mm dia (with bronze/ss impeller) up to 8 stages, 1.5 hp, 2.0 hp, 3.0 hp, 4.0 hp, 5.0 hp, 6.0 hp, 7.5 hp, m 1056 - pressure guage providing fabricating, testing and commisioning pressure vessel fabricating in m.s plate on providing foundation including epoxy paint, pressure gauge (100 mm dia), pressure gauge (150 mm dia), vacuum / combination gauge, m 1057 - lifting equipment chain pulley block supplying triple spur gear type chain pulley block suitable for capacity as below with 3 m lift complete with load chain and hand chain suitable for above lift, tested to 50% over load as per is 3832 carrying isi mark., 1 tonne capacity, 2 tonne capacity, 3 tonne capacity, electric operated circular or rectangular travelling crane (single girder) supplying single girder electrically operated rectangular over head travelling crane with 6 m lift complete with wire rope hoist, class ii duty, all three motions electrically operated by suitable rating motor ip 54, control panel and down pendant control block., 5 tonne capacity, above 6 m up to 8 m span, above 8 m up to 10 m span, 7.5 tonne capacity, above 6 m upto 8 m span, above 8 m up to 10 m span, 10 tonne capacity, above 6 m up to 8 m span, above 8 m up to 10 m span, m 1058 - lightening arrester, ab switch, insulators, lightening arrestor supplying, erecting approved make thyrite type lightening arrestor suitable for h.t. supply with necessary ancillary material complete on provided cross arm and connected to overhead line., suitable for 11 kv supply, distribution class, suitable for 22 kv supply, distribution class, suitable for 33 kv supply, station class, disc insulator. supplying, erecting porcelain disc type insulators with hardware fittings suitable for h.t. overhead line complete erected with nuts and bolts on provided cross arm, suitable for 11kv line, suitable for 33kv line, pin insulator supplying, erecting porcelain pin type insulators with hardware fittings suitable for h.t. overhead line complete erected with nuts and bolts on provided cross arm, suitable for 11kv line, suitable for 33kv line, air break switch without earth switch supplying, erecting approved make h.t. outdoor type gang operated air break triple pole switch of required capacity with 3 post / pin type insulator per phase , mounted in horizontal or vertical position on provided cross arm with adequate length of g.i. pipe for operating handle erected on extended square shaft. the operating handle provided with lock and key at suitable height from ground with necessary clamps, suitable for 11kv line, rocking / tilting type, rotating type, suitable for 33kv line, rocking / tilting type, rotating type, air break switch with earth switch supplying, erecting approved make h.t. outdoor type gang operated air break triple pole switch with earth switch of required capacity with 3 post / pin type insulator per phase , mounted in horizontal or vertical position on provided cross arm with adequate length of g.i. pipe for op

State Government

CTN :45228149

04 Jun, 2026 NA

Udhamsign Nagar - Uttarakhand

Tender For purchasing material used in replacement of defective parts, repairing, testing and monthly maintanance of 11 kv breakers installed at various 33/11 kv substations in electricity distribution division kichha under etd rudrapur - bus bar spout epoxy csted r phase, bus bar spout epoxy csted y phase, bus bar spout epoxy csted b phase, tnc switch, charging motor, bus bar insulator, charging assembly, pvc wire 2.5 sq.mm, vaccume interupter, 11 kv jaw contact, vcb trolley auxilliary switch with no/nc, tripping & closing coil, panel indicators r/g/b/y colour, master relay 24/oc/110vac/dc aux 30 vdc, interrupter housing, galv. n&b with washer and locking pin

State Government

CTN :45228141

04 Jun, 2026 NA

Udhamsign Nagar - Uttarakhand

Tender For purchasing material used in replacement of defective parts, repairing, testing and monthly maintanance of 11 kv breakers installed at various 33/11 kv substations in electricity distribution division rudrapur -i and rudrapur - ii - drive rod insulator for 11kv vcb (bhel), bus bar spout epoxy csted r phase, bus bar spout epoxy csted y phase, bus bar spout epoxy csted b phase, charging motor, charging assembly, vaccume interupter, 11 kv jaw contact, vcb trolley auxilliary switch with no/nc, tripping & closing coil, interrupter housing, galv. n&b with washer and locking pin

State Government

CTN :45010884

13 May, 2026 2.37 Lacs

Malavalli - Karnataka

Tender For supply of digital tong tester, multimeter, clampmeter, mini ac/dc clampmeter, telescopic earth rod, storage water heater, drilling machine, rubber mat, etc.,required for shiva power house, kpcl, malavalli-571 437

corporations/Associations/Others

CTN :43659602

28 Apr, 2026 29.77 Lacs

Jodhpur - Rajasthan

Tender For corrigendum : ac digital tong tester and tong tester for site testing - supply of a.c. digital tong tester and tong tester for site testing as per techcnical specification tn-2113

Central Government/Public Sector

CTN :44356862

04 Apr, 2026 NA

Vadodara - Gujarat

Tender For corrigendum : supply of digital tong tester , current meter , resistance tester , hand held current meter , multi meter , digital multi meter , low current clamp meter , true rms , electronic logging multi meter , magger , lcd hand held true rms clamp meter , ac or dc clamp meter , ac leakage current meter , one multi meter , tester , analog earth tester , two current meter , three multi meter , rms , insulation tester , four multi meter , five tester

Central Government/Public Sector

CTN :44465401

30 Mar, 2026 NA

Erode - Tamil Nadu

Tender For supply of work table dimension :2000x1200x850 mm (lxbxh).heavy duty work table for conventional locomotive traction motor rocker ring assembly for overhauling & testing purpose heavy dutywork station having ms steel top plate 5 mm thick. material of construction:-made of 40x40x2mm square pipe and 20g thick gi tata sheet.finish:-interior and exterior will be provided with epoxy powder coated finish. under bench cupboards will be provided one modular have three drawers and second modular have two shutter with one horizontal partition. accessories :-all necessary hardware fitting like pp handle and locking facility. tabletop:-5mm thick ms sheet with 2 mm thick rubber/pvc mat. note: drawing is attached

Digital Tong Tester Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors