Latest diodes Tenders | Government diodes Tenders

CTN :42715893

01 Dec, 2025 NA

Multi City - Multi State

Tender For 1550nm laser diodes and drivers

State Government

CTN :42577549

24 Nov, 2025 8.62 Lacs

Rewa - Madhya Pradesh

Tender For procurement of testing equipment for all power houses at thc sirmour - digital insulation testers (megger)range: 0-100/250/500/1000v, digital insulation testers (megger)range: 0-100/250/500/5000v, digital multimeterfeatures:dc & ac voltage; ac & dc current; continuity & resistance ; capacitance and inductance; checking of diodes/ transistors, single phase variable voltage autotransformers: details of single phase auto transformer 15a rating -input: 220v ac 10%; output: 0 to 270 volts.rating: 15 amps, three phase variable voltage autotransformers: details of three phase auto transformer 15a rating -input: 415v ac 10%; output: 0 to 500 volts, 3 phases.rating: 15 amps., tong tester cum multi meter (digital) (clamp on meter for ac measurements) specification for 0-1000a ac digital tong tester (clamp on meter) - current range: 0 to 1000 a (with settings of 1/10/20/40/100 a/500a/1000a auto ranging); voltage range: 0 to 60/300/600 v ac; accuracy: 0.3% or better, tong tester cum multi meter (digital) (clamp on meter for dc measurements) specification for 0-300a dc digital tong tester (clamp on meter) - current range: 0 to 300a (with settings of 1/10/20/50/100 a/300a auto ranging) ; voltage range: 0 to 60/120/300 v dc.accuracy: 0.3% or better., tong tester cum multi meter (digital) (clamp on meter for ac/dc measurements) specification for 0-100a ac digital tong tester (clamp on meter) - current range: 0 to 100 a (with settings of 00-20ma/100ma/500ma/1a/10a/50a/100a auto ranging); voltage range: 0 to 60/300/600 v ac; accuracy: 0.3% or better, digital phase sequence indicator: dial size: 96x96mm (minimum) ; working voltage: 50 to 500v ac; frequency: 25 to 60 cycles., digital earth resistance clamp meter with leakage current measurement

CTN :42616279

17 Nov, 2025 NA

Mumbai - Maharashtra

Tender For supply of 1.motor side bearing bearing motor side , 2.generator side bearing bearing gen. side , 3.revolving disc diode full of diodes generator diode disc assembly gen , 4.revolving disc diode full of diodes motor diode disc assembly mt , 5.automatic voltage regulator -1ph main automatic voltage regulator , 6.automatic voltage regulator -3ph main automatic voltage regulator , 7.protection relay card relay card , 8.contactor kit for generator contactor -1 ph , 9.contactor kit for generator contactor -3ph , 10.soft starter , 11.contactor kit for motor contactor

CTN :42616282

17 Nov, 2025 NA

Mumbai - Maharashtra

Tender For supply of motor side bearing , generator side bearing , diodes for revolving diode disc anode stud diode d4-d6 , diodes for revolving diode disc cathode stud diode d1-d3 , thyristor for motor diode disc , revolving diode disc complete with diodes motor diode disc assembly mt , automatic voltage regulator main diode disc assembly mt , protection relay card , hrc fuse links for motor , hrc fuse links for generator , olr for generator output , main contactor kit for generator contactor , soft starter

CTN :42648220

28 Nov, 2025 4.95 Lacs

Pune - Maharashtra

Tender For supply of fiber and optical components on pac basis d d - unmounted aspheric lens (f=3.1mm) make: thorlabs part no: 354330-c, mounted aspheric lens (f=3.1mm) make: thorlabs part no: c330tmd-c, tec 4.6a, 15.2v make: thorlabs part no: tech4, tec 3.7a, 14.3v make: thorlabs part no: tech3s, mounted aspheric lens (f=15.3) make: thorlabs part no: c260tmd-c, mounted aspheric lens (f=13.9) make: thorlabs part no: c560tme-c, kinematic mirror mount for ø1/2" optics make: thorlabs part no: km05, adjustable collimation tube with optic for ø5.6 and 09 mm laser diodes make: thorlabs part no: ltn330-c, unthreaded adapter for ø15 mm cylindrical components make: thorlabs part no: ad15nt, mini-series fixed ø10 mm mirror mount make: thorlabs part no: mfm10, mini-series fixed ø7 mm mirror mount make: thorlabs part no: mfm7, pm coupler - 50:50 make: thorlabs part no: pw1550r5f1, pm coupler-90:10 make: thorlabs part no: pw1550r2f1, extension tube, internal sm1 threading of 0.30" depth, external c-mount threading, one retaining ring included make: thorlabs part no: cm1103

State Government

CTN :42682129

20 Nov, 2025 NA

Erode - Tamil Nadu

Tender For supply, installation & commissioning of equipment- laser cutter , vinyl cutter , 3d printer , 3d scanner , cnc router , mini desktop lathe cum milling , drilling m/c 1 hp motor , handheld high speed drilling m/c-15000 rpm with accessories - 2 , nos. , benchtop grinder machine , solder stations (5 nos) , de-soldering m/c , advanced, motorized sewing machine , wood lathe , power tools , portable welding m/c , refrigerator. , normal and microwave oven , magnifying glass with stand-2 no. , digital microscope , mixed signal oscilloscope , digital storage oscilloscope , signal generator , variable power supply , bench top multimeter , projector , heavy duty laser printer , pcb milling machine" , smart board , computer workstation in networking-5 nos , vacuum cleaner , hot air gun-5 nos. , measuring equipment [vernier calliper (0-200/0.01), vernier height gauge (0-1000mm), , micrometer 0-50, 50-100/0.001 inside and outside)]. metal scale etc , fire extinguisher , first aid box , digital multimeter (5 units) , clothes iron (5 units) , electronic component repository (lcr meter, variac etc) , 3d printer filament- depending on the printer 2 rolls , acrylic sheets 2mm,3mm, 4mm, 5mm all of area 8ft x 4ft -2 sheets each , foam sheets 8mm, 10mm, 12mm, 15mm all of area 8ft x 4 ft-2 sheets each , ply boards 8mm, 12 mm, 18mm, all of area 8ft x 4ft- 2 sheets each , nylon rods 12mm, 15mm, 18mm, 25mm all of length 1 m -5 each , nuts 3mm, 4mm, 5mm, 6mm, 8mm, 10mm, 12mm- 100 each , bolts dia (3mm, 4mm, 5mm, 6mm, 8mm, 10mm, 12mm) length (1", 1.5", 2", 2.5") 100 each , screws 3mm, 4mm, 5mm -100 each , washers 3mm, 4mm, 5mm, 6mm, 8mm, 10mm, 12mm- 100 each , studs 6mm, 8mm, length 1m -5 each , nails 1", 2", 3" -100 each , adhesives m-seal, feviquick, fevi bond -10 each , 2way tapes 20 rolls , pvc pipes 0.75", 1", 1.5, 2.5", 3" length 10ft- 1 each , aluminum channels l, c, box, strip length 12ft -2 each , pcb drill bits 0.5mm, 0.8mm, 1mm -20 each , drill bits 3mm, 4mm, 5mm, 6mm,-20 each , drill bits 8mm, 10mm, 12mm- 5 each , carpentry boring bits entire kit- 1 kit , electronic active and passive components- resistors, capacitors, diodes and transistors -10 each , usb cables for connecting arduino and other development boards -10 nos , radium cutter knives-10 nos , glue sticks -50 nos , hack saw blades 6" and 12" -10 each , 9v battery snaps -20 nos , lan cables ( for connecting raspberry pi) -5nos , 9v batteries -20 nos , hacksaw (5 nos.) , micro chisel set (3 nos.) , pliers (3 sets) , manual pcb drilling machine (3 nos.) , pcb power drilling machine (3 nos.) , cordless drilling machines (2 nos.) , jigsaw machines (2 nos.) , power circular saw (2 nos.) , files set (2 sets) , file handles (1 set) , needle files (2 sets) , pipe vice (2 pcs) , mini hacksaw (5 nos.) , ball peen hammer (5 nos.) , steel shaft claw hammer (5 nos.) , nylon mallet (5 pes) , rubber mallet (5 pcs) , allen key set (3 sets) , dremel multi tool kit (2 nos.) , double ended spanner sets (2 sets) , 12 piece open ended spanner set (2 sets) , belt and disc sanding machine (1 no.) , scroll saw machine (1 no.) , tool wall covering perforator (3 pcs) , dremel moto saw , bench grinding machine , power return measuring tape (5 nos.) , tri square 8 (5 nos.) , stainless steel rule (5 nos.) , digital vernier caliper (5 nos.) , spirit level (5 nos.). , dremel cordless rotary tool , power router , sewing machine , impact drill (3 units) , ratchet set (2 units) , router bit starter kit , scroll saw , hot air blower with soldering iron (5 nos) , tin cutter with spring (10 units) , centrifugal blower , screwdriver sets (2 sets) , cutting mats (5 nos.) , vacuum cleaner (2 nos.) , hot air gun-5 nos. , micrometer-5 nos , glue gun-5 nos , air compressor , allen set wrench(5 set) , tongue and groove pliers (5 pcs) , non-contact voltage tester (5 pcs) , wire stripper (5 pcs) , fish tape (2 pcs) , flashlights (2 pcs) , dc regulated power supply (3 units) , solder wick (10 pcs) , filament dehydrator , refl

Central Government/Public Sector

CTN :42210085

13 Nov, 2025 NA

Sultanpur - Uttar Pradesh

Tender For corrigendum : supply of 2n1893, transistore-npn npn medium power transistor, to-39, 3 leads metal-can cylindrical , 54123dmqb, ic, monostable multivibrator, 16-pin dip, 54123dmqb, mil-883b , adg508ate/883, 8-channel multiplexer 20- pin lccc mil / 883 temperature range -55 to+ 125 deg. c. , am29f160db-75ei, 1mx16-bit flash memory bottom boot; code sector , bc107, transistor-npn (through hole) bc107 , bcy71, transistor-pnp (through hole) bcy71 , cwr11kh105kc, chip capacitor, tantalum 1 micro farad/25v, mil -55 deg. c , fm3808-70-t, 256kb ferro electric nvram with inbuilt rtc 32-pin, tsop package , jan 1n5811, diode high efficiency power rectifier mil temp. range -65 , m39010/04b1r0kr, inductor phenolic 1 micro h/930ma, mil -55 deg. c to+ 125 deg. c, , mc68376bgmft20, ic, microcontroller, 160 pin qfp package, mc68376bgmft20, , mic29152bu, adjustable voltage regulator 5-pin o-263-5 package, industrial temperature , pm156az/883, op-amp, 8 pin hermatic dip, mil-gra de screened with 883b , s553- 5999-f2, transformer 10base-t dual isolation transformer , ckr05bx103kr, capacitor multilayer ceramic, 0.01uf, + -10 percent, 100vdc, , ckr06bx104kr, capacitor multilayer ceramic, 0.1uf 10 percent, 100v dc, , ckr16br225km, dc capacitor 2.2uf, + -10% , 50v, multilayer, ceramic case size , mc68en360cem25l, integrated communication controller integrated communication , jan1n4531, high speed diodes, piv= 75v package - sod689 (do-34) , temp. , 54f676fmqb, ic, shift register (smd) , 24-pin flat pack, 54f676fmqb, , dm54ls74aw, dual d flip flop 14 pin flat pack mil-grade screened with 883b , cwr11kh106kc, chip capacitor, tantalum 10micro farad/25v, mil -55 deg. c , 8te01b12, metalic cap. , mil c 38999 seriesii,

CTN :42565267

13 Nov, 2025 NA

Ernakulam - Kerala

Tender For tender for supply of procurement of 07 by type seaking spares d d - small signal switching transistor , integrated voltage to frequency convertor , low panel dual operational amplifiers , switch diodes , surface mount zener diode 15v 500mv , small signal zener diode 18v 05.w , transistor

CTN :42567141

24 Nov, 2025 2.00 Lacs

Hyderabad-T - Telangana

Tender For supply of 555 timer ic , 741 operational amp , resistors one by two w 1 kilo ohms , resistors one by two w 220 ohms , 60 by 40 solder , rma flux , bread boards , pcbs general purpose , 9v batteries , hookup wire red color , hookup wireblack color , hookup wire red , hookup wire black , capacitor ceramic zero point 1 ufarad , common anode seven segment displays , ic 7447 decoder by driver , light dependent resistor ldr small , light dependent resistor ldr big , diodes in4007 , capacitors 1000u farads by 63v , ic 74ls00 , ic 74ls02 , ic74ls04 , ic 74ls08 , ic74ls10 , ic74ls11 , ic74ls32 , ic74ls86 , ic 74153 , ic7490 , ic7493 , ic74194 , ic7495 , ic74138 , ceramic capacitors 105 by 230 v , ceramic capacitors 5 micro farads by 400v , electrolytic capacitors 4.7 micro farads by 250 v , resistor 1 mega ohm , resistor 10 ohm 1 watt , aurdino uno boards with data cord

Central Government/Public Sector

CTN :42527065

20 Nov, 2025 2.70 Crore

Varanasi - Uttar Pradesh

Tender For tender for supply of supply and installation of rack mounted fids having 2 nos. servers to work as (1 nos. main and 1 nos. standby) complete with all accessories as per the tender specifications. , supply and installation of 3x2 mtrs. or higher true color led display board for arrival and departure flight information suitable to operate on 230 v , 50 hz ac supply including floor/ ceiling /wall mount complete as per site requirement and tender specifications. , supply and installation of 55inch full hd led display monitor suitable to operate on 230 v , 50 hz ac supply with inbuilt intelligent controller complete as per tender specifications. , supply and installation of 42inch/43inch full hd led display monitor suitable to operate on 230 v , 50 hz ac supply with inbuilt intelligent controller complete as per tender specifications. , supply and installation of data entry terminal (pc workstation) complete with cpu , minimum 21 inch monitor , operating system , antivirus including all accessories like keyboard , mouse etc. complete as per specifications. , supply and installation of ntp server to act as master clock with accuracy of 50 ms or better to connect other clients suitable for both windows or linux os as per site requirement complete as required. , supply and installation of server level licensed operating system with support for all servers in this work complete as per specifications. , supply and installation of client level operating system for pc workstation etc. with support for all clients in this work complete as per specifications. , supply and installation of server level licensed antivirus with support for all servers in this work complete as per specifications. , supply and installation of client level licensed antivirus with support for all client pc workstations in this work complete as per specifications. , supply and installation of 2x30 kva true online ups suitable for use in parallel configuration with 3 phase input and three phase output , igbt based converter , output voltage thd- less than or equal to 3% for linear load , less than or equal to 5% for non-linear load , output frequency- 50 hz plus/minus 0.25% or better , with automatic integral bypass , including safety provisions like over voltage , short circuit , overload etc. with suitable rating input/output isolation transformer including supply and installation of battery bank of 12v , 42 ah or higher batteries suitable for minimum 30 minutes backup at rated load (for each 30 kva ups) including accessories like battery connecting terminals , cables , lugs etc. including suitable size battery stand complete as required as per site requirement and mentioned specifications. , supply and installation of class i surge protection device as per iec 61643-11 suitable for 30 kva ups , as per site requirement and tender specifications. , earthing for ups system earthing with copper earth plate 600 mm x 600 mm x 3 mm thick including accessories , and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc. with charcoal/ coke and salt as required. , earthing for ups system providing and fixing 25 mm x 5 mm copper strip on surface or in recess for connections etc. as required. , supply and installation of power distribution panel suitable for distribution of power supply from ups to various devices complete as per site requirement and tender specification. , supply and installation of 2nos. layer 3 switch , 24 port , 1ru , poe network switch with fully populated 16 nos. of 1 gbps copper port and 8 nos. fibre port with 4 number 10g sfp slot , jack panel and other accessories and 1to1 redundant hot swappable power supply complete as required as per tender specifications and site requirement. switch should have dual redundant cpu in active- active mode or should be a set of two nos. of switches in active-active redundancy mode. , supply and installation of layer 2 switch , 24 port , 1 ru with with fully p

Diodes Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

Central Government/Public Sector

Central Government/Public Sector