Latest diplory Tenders | Government diplory Tenders

Central Government / Public Sector

CTN :45302372

01 Jun, 2026 NA

Multi City - Andhra Pradesh

Tender For auction sale of depot non ferrous scrap - brass lump scrap - 98200045(15) cond.& u/s brass lump scrap consisting of flow lamp, oxygen regulators, 63a 5 pin plug components, spcc panel components, catenary ending cones, catenary splices, bushes, bolts, nuts, gas cutting torches, gm valves, float valves, tap bib cock, cp angle valves, dropper clips, contact wire swivel clips, marut hand compression sprayer, brush holders, terminal connectors, pg clamps, bracket direct clamps, steel wire ending cones, briddle wire dopper clips, rods, key spindle, nozzle type, dv components, trunnion body for bmbc, etc. available in the bin with or without other attachments. total gross weight: 865.6 kgs. said to contain total brass content: 845.501 kgs approx., total ms content: 5.65 kgs approx, total aluminium content: 5.194 kgs approx, total stainless-steel content: 3.14 kgs approx, and plastic, rubber, etc: 6.115 kgs approx. hsn code:74040022; gst@18% on forward charge basis. note: 1) delivery on actual weighment basis only 2) segregation not permitted. 3) purchasers/firms are requested to physically inspect the lot before offering their bids. 4) post auction no representation shall be entertained.5) it is the responsibility of the purchaser/bidder to return excess material, if found during gross weighment, to the nominated premises of the custodian. 6) request for fixation of delivery point should be invariably raised in ireps online only. purchasers are requested to make use of this facility. 7) railways does not guarantee for quality, quantity description etc. location: non-ferrous ward bin no: 1.

Central Government/Public Sector

CTN :45302965

02 Jun, 2026 NA

Wani - Maharashtra

Tender For providing of custom bid for services - tree vegetation cutting over electric power line and cleaning grasses and bushes of ukni ocm wna

CTN :45214016

28 May, 2026 NA

Gurgaon - Haryana

Tender For corrigendum : supply of indicator assy rh , indicator assy lh , tail light assy , speedo cable , wiper blade , wiper arm with blade , cable accelerator for rear , glass regulator , water foam level indicator , assy door handle outer , door handle inner , side indicator assy , indicator assy , wiper blade assy , digphragm front brake chamber , solenoid switch , brush holder assy with bushes , combination switch , door trim , carbon brush startor

CTN :45163166

27 May, 2026 NA

Sagar - Madhya Pradesh

Tender For bid to ras corrigendum : supply of fuel filter cartridge 10x0620 , air filter element outer 10x472 , loader arm bushes end 3b0076 , bucket cly head end hose 3hoh39 , fan belt vcc ribbed 10x550 , o ring 700003110 , arm cly seal kit 10x321 , bushes bucket cly head end 10x938 , loader lift cly hose rod end 3h0435 , bushes cabin lift cly 10x901 , o ring 700003022 , bush lift cly 10x0920 , bucket intemediate hose 3h0437 , loader arm pin bucket end 3b0090 , suction hose charge pump 3h0773 , flat face couping set 3h0439 , loader arm bushes bucket end 3b0083 , hand pump seal kit 10x0480 , flat face couping set 3h0440 , bucket cly seal kit 10x323 , hyd filter 3512254m1 , element lub oil filter 10x0619 , cabin cly seal kit 10x903 , o ring 700003050 , air filter element inner 10x471 , bushes bucket cly rod end , nut lock 10x643 , seal oil ring 10x539 , suction hose hyd pump 3h0772 , loader arm pin tower end 3b0091 , oil filter mg19 dynaf 100004 , transmission filter , air outer element , air inner element , 4x4 relay , fuel hose pipe , hyd hose pipe , bucket teeth left , bucket teeth right

State Government

CTN :45285818

05 Jun, 2026 32.00 Lacs

Multi City - Karnataka

Tender For the brief scope of work includes re-alignment of machine shaft, replacement of shaft seal and erection, testing & commissioning of river bed unit 2 of bhadra generating station.i.dismantling of turbine guide bearing shell along with connected pipelines and associated equipments.ii.dismantling of complete oil header assembly with connected pipelines and associated equipments.iii.dismantling of ugb, lgb assembly along with connected pipelines associated equipments.iv.removal of damaged shaft seal and maintenance seal.v.removal of damaged top and bottom bronze bushes of oil header assembly for inspection.vi.supply and installation of top and bottom bronze bushes of oil header assembly as per required dimensions.vii.supply and replacement of new shaft seal and maintenance seal as per sample along with all required accessories, fasteners, o-rings etc.viii.re-babbitting of tgb shell if required.ix.assembling of tgb, ugb and lgb including all required accessories like gaskets, fasteners, seals, o-rings, o-chords, loctite etc.re-alignment of machine shaft including ugb, lgb and tgb.xi.complete erection, testing & commissioning of the unit including all required accessories like gaskets, fasteners, seals, o-rings, o-chords, loctite etc.

CTN :45305726

02 Jun, 2026 NA

Multi City - Rajasthan

Tender For supply of spares of hp and lp pilot valve and servo assembly of tdbfp drive turbine (nk63/71-3) make m/s veljan hydrair pvt. ltd. of unit 7 and 8 stpssc, suratgarh - bushes set (3 nos. as set) of hp pilot valve assembly for tdbfp drive turbine (nk63/71-3), spring assembly (spring, bearing, seat, bush, seals) of hp pilot valve assembly for tdbfp drive turbine (nk63/71-3) , control slide assembly of hp pilot valve assembly for tdbfp drive turbine (nk63/71-3), bushes set (3 nos. as set) of lp pilot valve assembly for tdbfp drive turbine (nk63/71-3) , spring assembly (spring, bearing, seat, bush, seals) of lp pilot valve assembly for tdbfp drive turbine (nk63/71-3) , control slide assembly of lp pilot valve assembly for tdbfp drive turbine (nk63/71-3) , spare piston rod with piston for hp servo cylinder for tdbfp 300x63x210 as per drawing 064t923/r1 , seal kit with bush and retainer for hp servo cylinder for tdbfp 300x63x210 as per drawing 064t923/r1 , spare piston rod with piston for lp servo cylinder for tdbfp 125x25x85 as per drawing 064t926/r1 , seal kit with bush and retainer for lp servo cylinder for tdbfp 125x25x85 as per drawing 064t926/r1

CTN :45305833

08 Jun, 2026 35.94 Lacs

Faridabad - Haryana

Tender For beautification works in including play equipment, open gym, plantation and repairing of boundary wall at brahampuri park saran village boosting park in ward no. 09 nit faridabad.(recall) - labour charge for making tee connection with existing line excavation, cutting jointing and making connection with existing line complete in all respect, supply and fixing of pvc tee 150x150x150mm dia., chain swing (2seater): 10 l x 6 w x 8 .5 h. horizontal frame and vertical legs is of m.s. pipe 2 x 12 gauge. it stays with m.s. pipe 1 x 12 gauge. swinging seats-2nos is of frp molded seat of 2mm thick fitted with m.s. pipe frame x 12 gauge which hang with m.s. chain 6mm thick duly plated with ball bearing and m.s. flat 6mm thick housing. complete with epoxy primer (interseal 670 hs) and pu finish (interthane 990) paints (protective coating division) in multi colors item with gst, transportation, installation with c.c and amp: labor at site., sea saw (4seater): - 8 l x 5 .5w x 15 high. frame is of m.s. pipe 2 x 12 gauge. sitting planks is of m.s. pipe 2 x 12 gauge and its cantilever and handles is of m.s. pipe x 12 gauge. sitting seats 4 nos. is of molded frp material in 3mm thick with epoxy primer (interseal 670 hs) and pu finish (interthane 990) paints (protective coating division). complete item with gst, transportation, installation with c.c and labor at site., bridge ladder: 10 l x 2 w x 6 h. horizontal ladder is of m.s. pipe 2 , andamp: vertical ladder is of same material of 12-gauge isi mark with epoxy primer (interseal 670 hs) and pu finish (interthane 990) paints (protective coating division). complete item with gst, transportation, installation with c.c and amp: labor at site., merry-go-round (4-seater): 5 dia. main frame is of m.s. sq. pipe 2 x 2 x 14 g and having suitable handle andamp: foot-rest is of round pipe x 12 gauge. central pipe is of m.s. pipe 3 x 12 g with heavy duty shaft 50mm thick andamp: ball bearing assembly. it consists of 4no chair made of molded frp plastic. complete with epoxy primer (interseal 670 hs) and pu finish (interthane 990) paints (protective coating division) in multi colors item with gst, transportation, installation with c.c and amp: labor at site., pvc reducer 150mm x 100mm.., frp dustbin (tilting type) of capacity 60 ltr. body is made of moulded fiberglass re-enforced plastic (non- halogen fire retardant resign) of 2mm thick having its lid with handle. it fitted with m.s. square pipe 1.25` x 1.25` x 14 gauge and m.s. flat 50 x 5mm, 30x 5mm base structure with epoxy primer interseal 670 hs and pu finish (interthane 990) paints. complete item with gst. transportation, installation with cc and labor at site., making connection with existing sewer main line, p/f of pvc 100mm dia bend., supply of pvc pipe 150 mm dia with isi mark 8kg.cm2 pressure, supply of good earth complete as per site requirement, p/f chest press is made from is-1239 b class gi-pipe. the center pipe is of 100mm nb made from b class gi-pipe, and the bottom support is of ms round plate of 250mm dia and 10mm thick is welded at the bottom of the pipe. the remaining frame is made of 32mm nb b class gi-pipe. the handle frame and seat is made of 32mm nb b class gi-pipe. connecting rod is made from 25mm nb b class gi-pipe. seat is made from roto-moulde. for the assembly different bushes are used which is made from 60mm with 3mm thick seamless pipe is used., p/f seated puller is made from is-1239 b class gi-pipe. the center pipe is of 100mm nb made from b class gi-pipe, and the bottom support is of ms round plate of 250mm dia and 10mm thick is welded at the bottom of the pipe. the remaining frame is made of 50mm and 25mm nb b class gi-pipe. the handle frame and seat is made of 32mm nb b class gi pipe. connecting rod is made from 25mm nb b class gi-pipe. seat is made from ms sheet of 2mm thick. for the assembly different bushes are used which is made from 60mm with 3mm thick seamless pipe is used, p/f sky walker is made from is-1239 b class

CTN :45306403

30 May, 2026 30.78 Lacs

Faridabad - Haryana

Tender For beautification and development of undeveloped park through plantation of grass, shrubs, open gym, children play equipment etc. in gali no.54 sanjay colony, ward no. 5, faridabad. - transportation all items, installation charge all items, p/f chest press is made from is-1239 b class gi-pipe. the center pipe is of 100mm nb made from b class gi-pipe, and the bottom support is of ms round plate of 250mm dia and 10mm thick is welded at the bottom of the pipe. the remaining frame is made of 32mm nb b class gi-pipe. the handle frame and seat is made of 32mm nb b class gi-pipe. connecting rod is made from 25mm nb b class gi-pipe. seat is made from roto-moulde. for the assembly different bushes are used which is made from 60mm with 3mm thick seamless pipe is used., p/f seated puller is made from is-1239 b class gi-pipe. the center pipe is of 100mm nb made from b class gi-pipe, and the bottom support is of ms round plate of 250mm dia and 10mm thick is welded at the bottom of the pipe. the remaining frame is made of 50mm and 25mm nb b class gi-pipe. the handle frame and seat is made of 32mm nb b class gi pipe. connecting rod is made from 25mm nb b class gi-pipe. seat is made from ms sheet of 2mm thick. for the assembly different bushes are used which is made from 60mm with 3mm thick seamless pipe is used, p/f sky walker is made from is-1239 b class gi-pipe. the center pipe is of 100mm nb made from b class gi-pipe, and the bottom support is of ms round plate of 250mm dia and 10mm thick is welded at the bottom of the pipe. the remaining frame is made of 50mm nb b class gi-pipe. the handle frame is made of 25mm nb b class gi-pipe. foot rod is made from 50x50 ms square pipe of 3mm thick. for the assembly different bushes are used which is made from 60mm with 3mm thick seamless pipe is used., p/f air walker is made from is-1239 b class gi-pipe. the bend pipe is of 80mm nb made from b class gi-pipe, and the bottom support is of ms round plate of 250mm dia and 10mm thick is welded at the bottom of the pipe. the remaining frame is made of 25mm nb c class gi-pipe. the leg frame is made of 32mm nb b class gi-pipe. for the assembly different bushes are used which is made from 60mm with 3mm thick seamless pipe is used. the foundation used for fixing it consist of three equal items i.e. 80mm nb made from b class gi-pipe, ms round plate of 250mm dia and 10mm thick,, p/f horse rider is made from is-1239 b class gi-pipe. the center pipe is of 100mm nb made from b class gi-pipe, and the bottom support is of ms round plate of 250mm dia and 10mm thick is welded at the bottom of the pipe. the remaining frame is made of 32mm nb b class gi-pipe. the handle frame and connecting rods is made of 25mm nb c class gipipe. seat frame is made from 32mm nb b class gi-pipe. seat is made from ms sheet of 2mm thick. for the assembly different bushes are used which is made from 60mm with 3mm thick seamless pipe is used. the foundation used for fixing it consist of three equal items i.e. 80mm nb made from b class gi-pipe, ms round plate of 250mm dia and 10mm thick., p/f leg press is made from is-1239 b class gi-pipe. the center pipe is of 100mm nb made from b class gi-pipe, and the bottom support is of ms round plate of 250mm dia and 10mm thick is welded at the bottom of the pipe. seat frame is made from 32mm nb b class gi-pipe. seat is made from ms sheet of 2mm thick. for the assembly different bushes are used which is made from 60mm with 3mm thick seamless pipe is used. the foundation used for fixing it consist of three equal items i.e. 80mm nb made from b class gi-pipe, ms round plate of 250mm dia and 10mm thick, p/f push-up-bar is made from is-1239 b class gi-pipe. the center pipe is of 100mm nb made from b class gi-pipe, and the bottom support is of ms round plate of 250mm dia and 10mm thick is welded at the bottom of the pipe. the remaining frame is made of 32mm nb b class gi-pipe. the foundation used for fixing it consist of three equal items i.e. 80mm nb made from

State Government

CTN :45310616

04 Jun, 2026 NA

Navsari - Gujarat

Tender For tender for cutting and removing unreserved standing trees, bushes, and shrubs

State Government

CTN :45315962

01 Jun, 2026 4.13 Lacs

Panaji - Goa

Tender For clearing of grass n bushes on the proposed land survey no.122/1 of calapur village, tiswadi taluka for construction of new collectorate complex for north goa district.

Diplory Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government / Public Sector

Central Government/Public Sector

State Government

State Government

State Government