Get complete information related to latest Disc Wheel Scrap Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Disc Wheel Scrap Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Disc Wheel Scrap Tenders.
Tender For auction sale of depot ferrous scrap - scrap ms/ci items consisting of parts/cut pcs of weighing machine, cut pcs reservoir tank, coil spring, broken pcs of old printing machine parts, cover sheet, chain pulley, ms knife, weighing bridge items, locking plates, connecting rod, bearing pieces, springs, plates, draft gear, dummy shaft, bearing, ms sheets, boxes, ms impeller, ms jali, drain cover, grab handle, rods, brackets, ms rings, hangers, brake shoe ,footsteps, lower spring beam, spring , cut pieces or small coil springs and other similar type of ms items released from locos with or without minor nf and other attachment. location - b by 1, c by 1 near office
Tender For corrigendum : supply of hex. hd. bolt m20x80-8.8 and prevailing [hex. hd. bolt m20x80-8.8 and prevailing torque type nut to size m20 with punched washer size a22 for safety wire rope of brake beam items 18,22 and 23 of t-3-2-801, alt h/5.]
Tender For auction sale of depot ferrous scrap - scrap condemned & unserviceable ms scrap (buffer plunger, saket, brake beam, u braket, dustwin, foot step and other) weight= 20.918 mts. for custodian information ss-11 no. jbp/c&w/store/25-26/14 dt. 05.02.2026. ds-8 note no. 043058 dt. 05.02.2026. mode of delivery by actual weight only.
Tender For auction sale of depot ferrous scrap - mixed ferrous melting scrap amalgamating various type consisting of melting scrap class mf/10, pl/8, pl/4, mp/3, b/9, b/14, cs/1, cs/2, hf/1, b/10, b/11, mp/6, j/4, db/1,p/4, mp/1, mp/4, sp/3 and st/2 (small qty. in mixed condition), mp/5, gi & ms nuts and bolts, iron chair and small parts, cbc component with or without rubber attachement, flap door ,low grade steel parts of wagon bodies e.g. irs m-44 etc. twin pack draft gear f-325 g, gi rods ,brake beam and air reservoir tank ,brake cylinders, pipe, including up to 5 kgs cast iron with ms attachments. as available as in the lot. nb - cutting not allowed .
Tender For auction sale of depot ferrous scrap - "mixed ferrous melting scrap amalgamating various type consisting of melting scrap class mf/10, pl/8, pl/4, mp/3, b/9, b/14, cs/1, cs/2, hf/1, b/10, b/11, mp/6, j/4, db/1,p/4, mp/1, mp/4, sp/3 and st/2 (small qty. in mixed condition), mp/5, gi & ms nuts and bolts, iron chair and small parts, cbc component with or without rubber attachement, flap door ,low grade steel parts of wagon bodies e.g. irs m-44 etc. twin pack draft gear f-325 g, gi rods, brake beam and air reservoir tank ,brake cylinders, pipe, including up to 5 kgs cast iron with ms attachments. as available as in the lot. nb - cutting not allowed .
Tender For auction sale of rolling stock - scrap iron and steel cut up parts of condemned bcnm1, bobrnm1, boxnr, boxnm1 & bobrm1 wagons no as following: [1] ser 30078963020 bcnm1 [2] er 72029678980 bobrnm1 [3] er 25029660899 boxnr [4] er 10029661281 boxnm1 [5] scr 10099662737 boxnm1 [6] er 72029561275 bobrnm1 [7] ser 25079662478 boxnr [8] er 72029661159 bobrnm1 [9] er 72029662002 bobrnm1 [10] cr 72019360383 bobrm1 [11] nr 10039660588 boxnm1 [12] ser 10079649802 boxnm1 condition:-[1].the wagon is sold on number basis however delivery shall be given on actual weighment basis at the time of delivery. the lot weight mentioned in the catalogue is on approximate basis.the maximum permissible deliverable quantity (144.640 mt) is the lot quantity (144.640 mt) as mentioned in the catalogue.[2].the weighment of the material shall be carried out at ssy/jmpw weighbridge .[3].if the actual quantity found at the time of delivery is less than the estimated/sold quantity, no claim for shortage, refund, or proportionate return of sale value shall be entertained.[4].if the actual quantity found at the time of delivery is more than the estimated/sold quantity, the excess material shall not be delivered to the purchaser and shall be retained/returned to the custodian.[5].no dispute regarding variation in weight shall be entertained after e-auction sale.[6].before bidding, bidders are advised to inspect and tally every details of the lot as appearing in catalogue which is published in ireps portal with the actual material in ground. no complaints/claim by the purchaser will be entertained in this regards after e-auction sale.[7] cutting is allowed for loading facilities only. [8] cutting time of sold wagons of jmpw/dhobighat would be 08.00 hrs. to 16.00 hrs. on weekdays and 08.00 hrs. to 12.00 hrs. on saturday. purchaser, their labours or any other staff will not be allowed to remain at dhobighat area beyond the scheduled working hour. the purchaser may, however, be allowed to keep their watchman to guard their material. no cutting tools will be allowed inside dhobighat area on sunday and other holidays. [9] to be sold without all available excluded fittings as follows:- (i) for bcnm1, boxnr & boxnm1 : bogie (except 22w & 22wm), wheel set with ctrb, brake cylinder, draft gear, coupler body, yoke & yoke pin, distributer valve, yoke supporting plate, yoke pin supporting plate, all sorts of bolster springs, slack adjuster, hand brake wheel, knuckle, anchor plate with safety plate, apm, brake beam complete for casnub bogie, equalising lever with bushes, bogie brake push rod.as per list of excluded fittings of wagon letter no. mc/300/pt-xx kolkata dated 10.04.2024.(ii)for bobrnm1 & bobrm1 : bogie (except 22w & 22wm), wheel set with ctrb, brake cylinder, draft gear, coupler body, yoke & yoke pin, distributer valve, yoke supporting plate, yoke pin supporting plate, dom cylinder, square shaft with bush, all sorts of bolster springs, slack adjuster, hand brake wheel, knuckle, anchor plate with safety plate, lsd, apm, brake beam complete for casnub bogie, equalising lever with bushes, bogie brake push rod.as per list of excluded fittings of wagon letter no. mc/300/pt-xx kolkata dated 10.04.2024.(iii) sl no. 05 and 08 are fitted with 22w(m) casnub bogie which are to be sold with wagon.
Tender For maint of rota side wagon tippler e e -repl of main rails and raising of rails , tightening, repl. of all bolts, clits , repl,re fixing of bushes , repl of spur gear assembly , repl of rack pinion , oh of reduction gear box , replacement of sector gear , alignment, grouting of tippling base rollers , repl,repairing of hopper grill , alignment of tipplers , repl,repairing of outboard stool , dismantling,repl of top pivot housing , repl of wooden block , matching of teeth of sector gear , re-fixing lock lever , repl of top stop locking gears assly , side beam fixing of tippler , alignment of motors of wagon tippler , servicing of spray line valve size 4 inch , servicing of spray line valve size 3 inch , servicing of spray line valve size 2 inch , oh of overhead spray pumps , servicing of spray nozzles , lifting, proper fixing of vf tray , changing, fixing of side packing , to provide the patches , repl of plates of vf tray, chutes , removal of foreign , fillings oil in gear box , servocoating,tightening, repl of damaged bolts , greasing of all the nipple point , repl of break shoe liner , repl of main rail beam of wagon tippler , provision of backup in main rail beam , work on central platform , repairing of main rail beam , repairing of rollers of coal spill plates , fab, erection of back support of vf mouth chute , fab., installing of vf tray supports , repl of coal spill plate , repairing of pit platform of main rail beam , repl of damaged beam of vf , repairing of counter balance beam , repairing of mdu base structure , repairing of damaged split spur gear , fab., of mouth piece of vf , erection of new fabricated mouth piece of vf , oh of hoisting system , oh of hopper spray pump, line , provision of hopper liners, in coal hopper of vf , fab. erection of coal hopper partition stool , raising and re-fixing of mouth piece of coal liner chute of vf , repl of back,side plate of mouth piece , to attend the coal leakage from top mouth piece , re-fixing,repositioning of side and back supports , repairing,reposition of side guards of mouth piece , repl of buffer block and buffer pads of counter balance beam , repl of brake drum of thruster brake assly , repl of input,output,intermediate pinion of gear box , fab. and erection of counter balance beam , repairing of wagon tippler plate form by cutting and welding , removing the fallen loaded wagon in pit , inserting the side beam pins in bracket , dismantling,removing the broken shafts of wagon tippler , installation of drive and adjacent intermediate shaft , cutting, fabricated and installation of resting outer rail beam bottom plate