Latest discharge gate Tenders | Government discharge gate Tenders

State Government

CTN :45285975

28 May, 2026 1.21 Crore

Daman - Gujarat

Tender For providing and supplying modular furniture for newly constructed government school building at kachigam, nani daman. - civil works, providing supply and installation of corner sink table -size :-1100mm l x 1100mm d x 900mm hconstruction : floor based welded cabinet system having storage body should be flush face construction with intersection of vertical and horizontal members like lh and rh side panel along with front horizontal channel, back panel and bottom panel. it should be relocated anywhere easily as it is an independent unit. cabinet should of square non-sharp edge construction. doors should be assembled with ss-304 hinge assembly. removable back panel should be provided to easily access the service lines running behind the cabinet benches. intermediate horizontal channels should be provided between door and drawer. toe-space of 90mm x 90mm is provided at front-bottom side of cabinet. levelers are provided for easy leveling of welded cabinet. shelf should be eight-bend panel with 20mm height. drawer tray should be of single piece construction. drawer should be well supported on lh and rh ball slide suspension system. steel door and drawer front should be of double wall construction with sound dampening material filled inside. doors should be easily removable and hinges should be easily replaceable. knee space panel should be in 22 gauge , cabinets are tested as per sefa 8m standard from a sefa approved lab and also tested as per en 14727 from a third party testing agency having nabl accreditation. dimensions : w= 900 mm, d = 900 mm, h = 875 mm configurations: 1 shutter - 1 nos moc: mscrca: is 513 (1994) thickness: lh/rh side panels, shutter front, bottom panel, top front, drawer separator, shelf, alignment channel is of 1.2mm thk. removable back panel, shutter cover, fr. rack strip, top cover panel is of 0.8mmthk. finish: powder coating pure epoxy, thickness 40-50 microns , followed with 9 tank pre treatment process the thickness of powder coat should be 45-50 microns, which passes the test of salt spray for 1000 hours. it should have a high temperature withstanding capacity with excellent electrical insulation properties.the rear portion of above accessories which is in contact with live metal should be made from thermo set material which will not melt on heating.handle : anodized aluminum recessed-type, ctc: 160.0mm lock: units have a locking facility with 180 and 10 lever cam lock mechanism (except for sink and corner unit) hinge: ss hinge screw: ss 304.shutter : should be of twin-type construction with sound dampening effect using profill.shutter cover should be equipped with bump on for sound dampening. base moulding should be made of pvc with corner clips. ball slide: 500mm length shutter should have provision of roller catch.pp sink,polypropylene molded sinks: made up of 5 mm thick high density and elastic poly propylene with good resistance to organic solvents. sink - bowl size to be a minimum of (l x w x d) 560 x 355 x 300 mm.faucet - 3-way type faucet as per approved makeworktop : jet black granite: it should be 19mm (+/- 2mm) thick jet black granite worktop. the exposed edges of the worktop should be chamfered and smoothened. the bottom of the worktop should be polished and there should be a v-groove throughout the length of the exposed edges to protect the cabinets from coming in contact with the spillages. the overhang on the storage cabinet is 25 mm at the front side and 30 mm at the sides. the backing material used is a neoprene mat of 6 mm thickness. (make as per selection of architect or selection of higher authority), providing supply and installation of corner table - size 1100mm l x 1100mm d x 900mm hconstruction: floor based welded cabinet system having storage body should be flush face construction with intersection of vertical and horizontal members like lh and rh side panel along with front horizontal channel, back panel and bottom panel. it should be relocated anywhere easily as it is an indepe

CTN :45301145

30 May, 2026 35.67 Lacs

Silvassa - Gujarat

Tender For providing and installing furniture in staff quarters of new naroli phc at naroli in ut of dnh. - providing & fixing 3 seater sofa: dimensions w x h x d (cm)- 175 x 83.5 x 80finish color - brownseat height (cm) - 46.5upholstery material - fabricwarranty - 1 year warrantyprimary material - fabricaesthetically pleasing, mid-back designer backrest with tufts and clean stitching. rounded armrests with soft foam seating provide ergonomic comfort. easy-to-clean synthetic leather or fabric for the cool touch and feel., providing & fixing 2 seater sofa: dimensions w x h x d (cm)- 127.5 x 83.5 x 80finish color - brownseat height (cm) - 46.5upholstery material - fabricwarranty - 1 year warrantyprimary material - fabricaesthetically pleasing, mid-back designer backrest with tufts and clean stitching. rounded armrests with soft foam seating provide ergonomic comfort. easy-to-clean synthetic leather or fabric for the cool touch and feel., providing & fixing living room center table: diante coffee table hg mdf afy -diante coffee tablel x w x h 1100 x 600 x 463table-top 18mm thick hmrd board in afyon marbleplt 18 mm thick in black inkconfiguration shelf storage + concealed storag, providing & fixing living room side table: vegas table - 450d - 520h made with precision in urban design, the vegas corner table is a piece of art that can make any space come alive. its bright colour will enliven any interior. place it amongst monotones or other brightlycoloured furniture. the luxurious smooth finish of the base is made of fibre glass reinforced plastic. tempered glass top is stronger and more durable than regular glass, making it a safer choice for interiors. . this petite table can withstand a weight of up to 20kgs., providing & fixing living room tv unit :"overall size:height - 550 mm x width - 1504.0 mm x depth - 450.0 mmmaterial:all the carcass body panels are made of 18 mm thick prelaminated particle boarden312, e1 grade in wood grain shades, with all theedges edge-banded with 0.8 mm. thick pvc lipping.carcass back panel & drawer bottom panels are made of 9mm thick prelaminatedparticle board of en312, e1 grade.door and drawer fronts are made of 18 mm thick, prelaminated particle boarden312, e1 grade in solid shade, with all the edges, edge-banded with 0.8 mm. thickpvc lipping.the bottom leveler frame and legs of the unit are made of 25x25x1.2 and 38x1.2erw tube as per is 7138, with powder coating finish.hardware: high quality hardware used like hinges, roller slides, cam fasteners,dowels, levelers", providing & fixing pooja room mandir: mandir size:length 1180 mm x depth 240 mm x height 1700 mm, kitchen dimensions:providing & fixing kitchen shuttersshutter material shall be 13 mm thick bwp/bwr grade plywood.lamination shall be done on both sides of the shutter with 1.0 mm thick exterior-grade. provide all required hardware fittings (hinges, screws, accessories, etc.) shall be included.fixing of shutters shall be done as per manufacturer s specifications and site requirements.dimensions:4750 mm x 1662 mmarea:85 sq.ft, providing & fixing dining table: dimensions w x h x d (cm) - 175 x 77 x 89.9primary material - rosewood (sheesham)finish color - dark brownnet weight (kg) - 45warranty - 1 yeardelivery condition - knock downstyle - contemporary & modern"overall size :dining chair :length : 45cm width : 45cm height : 95cmcushion seat : length : 45cm width : 45cm height : 50cm ", providing & fixing bed:overall size : length : 206cm width : 190.5cm bed height : 42cm bed with headboard height : 100.8cmbed -metal frame materials & dimensions:(gauge +/-0.1mm): m.s pipe 20x20 (square pipe), 30x5 (draw strip), 25x6 (draw strip), 20x5(draw strip), 8mm draw rnd sariya, 12mm draw rnd pipe. decoration materials & specifications: (density / type) 25mm softy foam, fevicol, 3 ply thermacol, 21x31 poly bag, etc, aventura mat 78 72 5 - 1981.2 l 1828.8w the aventura mattress has a plush euro-top surface with extr

CTN :44961942

26 May, 2026 65.76 Lacs

Jhalawar - Rajasthan

Tender For corrigendum : supply of spares for lnt make lt and ht switchgear, breakers and panel accessories of electrical circle and chp circle, csctpp, chhabra - racking handle for cn-cs 5000c, racking handle cn-cs 4000 h2, lockable trip push button type-aa, fixed arcing contact 800 s1, moving arcing contact 800s1, moving arcing contact, 5000c, hardware kit, spring charging, motor 220 v dc, spring charging limit, switch 220 v dc, closing coil 220 v dc, shunt release 220 v, dc, test position microswitch, service position microswitch, mdo to edo 800-, 2500c,3200h1(3p), mdo to edo 3200h1(4p), mdo to edo 5000c (4p), pole assembly 800c d/0, brekaer, door camlock-lhs, door camlock-rhs, racking handle, sic puller tq3 mat.-, delrin500, locking angle -tq3 m, tq3 earthing lip assembly, aux. busbar support, tq+tf2 v, aux.busbarterm assy, tf3,tq3-fr, aux.busbar support assy, tf3,tq3-fr, stainless steel door lock, td3,tf3-fr, bracket ,reset cord mn5 relay, ,tq3, xtension shaft, dropper support assembly, tq3 form iv, safety shutter tq3 d/o, safety shutter opener tq3, d/o, vcb spares 11 kv and 6.6, kv, big gear assembly, small gear -charging gear, assembly 12 kv vcb-25ka, subadha aux switch, (12no+12nc), tripping coil, closing coil, spring charging motor, vcb sds housing wo wire, pin locking channel, assembly, vaccum interrupter abb, vg6, drive rod assembly 800, a,1250a,2000a, vcb racking handle, spring charging handle, tripping rod, pin type channel racking, fixture 600 w, pin type channel racking, fixture 1000 w, breaker shutter assembly, 600 w, breaker shutter assembly, 1000 w, switron, switch,switron, 12no/12nc) aux., switch, rackin handel &, interlock, locking channel, assy 12kv 1250a 40ka, 1000w 3150a locking, channel assembly, limit switch, test/service,omron, make limit, switchmodel: x-, 10gm-b,contacts: 1, c/o, shutter roller, bracket 3150 a, roller for shutter, 3150a 40ka, pin for shutter, roller 3150a 40ka, 3150a breaker arm, contact - finger, contip finger f 2000a, vcb breaker, m4 flat washernylon(, 4.5 x 9, x 0.8mm), x 10-cozn pan head, m/c, screw, spring washer (zc), bottom conductor, arm, assy 12kv 3150a 40ka, top conductor arm, assembly 12kv 3150a, 40ka-abb, vi, 800a breaker arm, 800a vcb contact, finger assy new, flexible conductor, 12kv 800a, 40ka- abb vi, 2000a breaker arm, contip finger f 2000a, ø4 ss e-clips, ø6 ss e-clips, ø8 ss e-clips, ø10 ss e-clips 0.8mm, thk, circlip dia. 12mm, 1 mm, thick, 24 external type, circlip, wire circlip dia. 3.4+0/-, 0.4 ss, m3 x 25 spring pin, m3 x 30 spring pin, x 25 mm cotter pins, x 30 mm cotter pins, spring pin 6.5 dia x 40, long, split pin ø3x35, split pin ø1.8x20, connector type lug, for 800a,1250a,2000a &, 3150a), male connector - dnf, 14-250fim-m, female connector -, dnf 14-250fib-m, kv switchgear vcb, spares for type vk10l40h, rated voltage:12 kv, rated, normal current:800, a,rated s.c breaking, current : 40 ka & type, vk10q40h,rated, voltage:12 kv ,rated, normal current :3150, rated s.c. breaking, current : 40 ka, pds cable asm 12 kv, 800 a, short pds r phase asm 12, kv 800 a, short pds y phase asm 12, kv 800 a, short pds b phase asm 12, kv 800 a, breaker: type vk10l40h,, rated voltage:12kv, rated, normal current: 800a,, rated s.c. breaking, current: 40ka, line pt rack-in/out handle

CTN :45047373

21 May, 2026 NA

Gurdaspur - Punjab

Tender For bid to ras supply of bore , pvc connection with ptmt bolt and nut 15mm dia 450 mm length , waste cupling of cp coated half s steel sink 100 mm , stainless steel grating plate 125mm dia with or without hole , pvc internal kit for 10 ltr pvc flushing cistern , vitreous china wash basin 550 into 400 mm including brackets , gi union 15mm , aluminium door stopper alloy body , lock mortice 65 mm for doors , pvc stop cock 20 mm , pvc water tank cover for 1000 ltr tank , gi union 20mm , brass spindle half round for cp bib cock 15 mm , cp brass phase head for bib cock pillar cock concealed stopcock , gi tee 20 mm , jet spray cp with 1 point 2 mtr flexy tube , gi socket 20mm , brass spindle for cp pillar cock 15mm bore , pvc stop cock 15 mm ext threading , aluminium alloy anodised 125 mm long makeclassicargent , gi tee 15 mm , cp telephonic shower with 1 point 2 m tube with hose and hook , gi reducer elbow 20 mm into 15mm , gi socket 15mm , mild steel sliding bolts 300 mm long plate type , pvc water tank cover for 500 ltr , gi elbow 20 mm , cp concealed stop cock 15 mm , gi elbow 15 mm , mild steel barrel tower bolt 150 mm long , mild steel helical door springs including roller and roller plate , oil putty , gi reducer socket 20mm into 15 mm , aluminium anodised section 150 mm long , brass spindle half round for cp concealed stop cock , mild steel pressed stove enamelled black 150 mm , mild steel sliding bolts 250 mm long plate type , gi nipple 20mm into 125 mm , galvanised wire cloth mesh 0 point 56 mm nominal dia of wire , gi nipple 20mm into 150 mm , gi tank nipple 20 mm , gi nipple 15mm into 150 mm , gi nipple 15mm into 100 mm , plywood commercial 8 fett into 4 fett 12 mm thick grade bwr , gi nipple 15mm into 125 mm , gi nipple 15mm into 50mm , gi tank nipple 15 mm , towel ring brass chromium plated , gi nipple 15mm into 75mm , washer for syphone sets internal external dia of washer , aluminium alloy anodised sliding door bolt with hasp staple 250 mm long , plywood commercial 8 feet into 4 feet into 9 feet mm thick grade bwr , mild steel barrel tower bolt 200 mm long , teflon tape roll plumbing , pvc urinal pipe 40 mm dia 750 mm long flexible pipe , gi pipe 20 mm dia medium grade , plywood commercial 8 fett into 4 feet into 6 mm thick grade bwr , brass spindle for concealed stop cock , butt hinges, medium weight cold rolled mild steel 100 mm long , pvc bend pipe for superflow of flushing cistern , hex nipple 15 mm , gi plug 15mm , plywood commercial 8 feet into 4 feet into 4 feet mm thick grade bwr , mild steel mortice lock vertical type 2 levers 75 mm long with two set , vitrous china water closet seat ewc white , gi pipe 15 mm dia medium grade , aluminium alloy handles fabricated type, anodised 150 mm long , door seal with nylon brush side to of door shutter , thread roll good quality , tower bolt 125 mm long , mild steel powder coated hat and coat hook 6 nos of hook , statinless steel holder for curtain rod 25mm dia , mild steel wood screws size 19 iinto 10pack of 100 nos , mild steel full length threaded screws for iron window size n exc 15mm , mild steel cp coated hasp and staple 75 mm long , m-seal liquid , aluminium anodised, barrel tower section 200 mm long , pvc plugs for fixing screws to drill holes pack of 100 nos , sheet glass pin headed 4 mm thick. 4 feet into 4 feet , plywood commercial 8 feet into 4 feet into 19 mm , white cement shower rose 125mm joints brass chromium plated , stainless steel plate rack of size 900mm into 600mm thickness 1 mm , bib tap chromium plated 15mm dia isi marked, fancy type, angle valve cp brass 15mm bore, pvc cabinet looking mirror of size 600 into 450 mm , stop cock //bid details 2 / 82

Central Government/Public Sector

CTN :45254726

01 Jun, 2026 NA

Bhopal - Madhya Pradesh

Tender For supply of roller shutter door mounting to drg no. 1 10113.0.22.145.001, alt-c (except item no- 1). [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45241186

15 Jun, 2026 NA

Mumbai - Maharashtra

Tender For supply of roller shutter door mounting to drg.no. 1 10113.0.22.145.001, alt-c, item no-1 only. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45216516

29 May, 2026 5.42 Lacs

Sonbhadra - Uttar Pradesh

Tender For repairing 02 no of main swing chute cylinder, 04 no of discharge gate cylinder, 02 no of flow control gate cylinder of rls, bina project

Central Government/Public Sector

CTN :45228045

23 May, 2026 NA

Multi City - Chhattisgarh

Tender For scope of work (sow) as mentioned in tender and schedule of work( 63 )items as given below ,[1] taking out door&window shutter 110.000 ea,[2] lbr f/taking out door&window frame 83.000 ea,[3] taking out&refixg old rod,window frame 222.000 kg,[4] weather coat (single coat) 278.000 m2,[5] fixg 60mm thick decorative paver blocks 28.000 m2,[6] cutting kutcha drain,depth<30cm ord soil 10.000 m,[7] fixg,hydraulic door closer,heavy type 5.500 ea,[8] fly ash brick wrk, 110mm, m-7.5, (1:4) 555.000 m2,[9] fly ash brick wrk,230mm,m-7.5,foundation 55.000 m3,[10] flyash br wrk,230mm,m7.5,super sturcture 140.000 m3,[11] fixg netlon mosquito net to the windows 5.500 m2,[12] fixg,wash basin mixer 3.000 ea,[13] fixg,cp shower rose 3.000 ea,[14] fixg,wall mixer 3.000 ea,[15] fixg,cp pillar cock 5.000 ea,[16] sup,fit,fix hygeine pipe 22.000 ea,[17] takg out carefully frm shuter,wood bead 55.000 ea,[18] fixg,iron butt hinge,w/screw,50x30x.90mm 27.000 ea,[19] fixg,iron butt hinge,w/screw,50x37x1.5mm 16.000 ea,[20] cutting kutcha drain,depth<30cm mix soil 55.000 m,[21] all types of maintenance & civil jobs 1.000 ea,[22] prvdg,date catalogue,32x25mm 28.000 ea,[23] colour washing,pigment,int.all flr,2coat 555.000 m2,[24] plaster sand/cement mortar,4:1,thk10mm 8.000 m2,[25] pro,fix,float valve 11.000 ea,[26] lbr chrg f/fab,fixed glazing 5.500 m2,[27] app,rus,rem,eff area 16.700 m2,[28] cra,rep,cut,cra,hard 5.500 m,[29] dam,pro,tre,rem,loose 5.500 m2,[30] sea,str,cra,hig,viscous 5.500 m,[31] dis,pcc,lim,ter, works 14.000 m2,[32] plaster sand/cement mortar,6:1,thk15mm 55.000 m2,[33] ms/wi orntl grill,gnd flr,wt10-16kg/sqm 2.500 mt,[34] fabrication of m.s. structures 2.500 mt,[35] prov.,fixing white makrana marble 17.000 m2,[36] fixg decorative roller blinds to windows 11.000 m2,[37] providing single coat distemper 555.000 m2,[38] supply,fitg,fixg,venetian blinds 11.000 m2,[39] supply,storage tank,500ltr 28.000 ea,[40] air entrained screed concrete 50.000 m3,[41] fixg in position approved pvc door frame 111.000 m,[42] fixg,door frame,pvc 111.000 m,[43] supply&fixg,pvc door shutter 200.000 m2,[44] supply,fitg,fixg,pvc door 100.000 m2,[45] labour f/brickwork using old brick,cm1:6 11.000 m3,[46] supply & fixing of polcarbonate sheets 14.000 m2,[47] supply,erection of colour coated sheet 14.000 m2,[48] drying of damp walls/ceiling etc 11.000 m2,[49] prvdg&fixg,false ceiling 5.500 m2,[50] fixg door fitting,stainless steel aldrop 14.000 ea,[51] fixg,door,fully casing tower bolt 14

Central Government/Public Sector

CTN :45220330

25 May, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of depot ferrous scrap - cond. & u/s ferrous scrap in corroded nature such as head stock, foot steps, berth frame, engineering items such as rusted barrigaurds,ferrous pipes, grill,gate,grill,expandedmetal mesh,fabricated tool press,transformer sheets, pipes, boxes,dustbin holder,fencing scrap,bolts and nuts,false cealing patti, angles, rails adhered or separate, drum, coach cuttings, trolleys, window grills,fabricated gates,battery box in cut condition,angles, guards, dust bins, heavy nature coach parts parts in broken or full condition, pway support structures,gi sheets, pulley, frames, ferrous boxes, sign boards, roller shutters, corroded/ dinged/ damaged wagon door, zinc coated fs sheets, base plates,ms/gi sheets in full/cut/damaged/rusted/corroded/crushed condition, wagon floor sheet, coach door,sliding door of various sorts & sizes, battery boxes in cutparts,collapsible gate, punches plate/ sheet/ screen, corroded shear cutups, galvanised sheets rusted condition, roof light/tube light fitting with/without ballast, fl housing, tl patti, crushed drums, cfl frame, regulator box, ms gutter, corroded fabrication scrap, carriage fan body cover/end shield/ guard/ blade, pedestal fan guard, air brake pipes, corr. barrels/paint drums, silent block, anchor block, wires,chains,boxes,hoop iron,lamps,air filter,clips, panels, corroded gi pipes with/without valves, gi duct, ci covers/piper/joints,coach/wagon cutup parts,sheets,equalizing stay,brake anchor,round/square pipes,pipe wrench,pins, rivets, bolts, nuts, small iron pieces,heavy melting scrap,wire rope/safety rope with/without aluminium sling,box type fitting,pipes,dust bin, hood,rack,bond, hs lamp, battery charger core with iron stand or frame, iron core, fl patti & fitting of all types and sorts and sizes, fire extinguisher without cap, fan down rod, ferrous ac template, train information display system,battery tray,trough floor sheets,ferrous parts accessories released from carriage/wagon/loco rolling stocks, galvanized sheets of sorts & sizes, sand pipe,rolling shutter,gi/ms angles and channels,rails,cutmast,protectivetube, wagon/coach springs,shockabsorber, suspensionunit, equilising stay, ls beam, bolster, silent block,iron gate,clower cups,guard gril,irongrill,springs,pins, heavy melting scrap,ac duct,gi ipes,ladders and all the above items are of various sorts and sizes in full/cut/broken/damaged and with/without wooden/glass/ rubber/ fs end fittings with /without minor non ferrous attachments if any in as is where is condition. pl.no. 98090800. custodian: cdms-rsf-gsd-per. note: 1) cutting is permitted to lorry loadable size only. 2) if any non-ferrous materials found should be handed over to custodian.3) jcb/crane loading is permitted. location: arumugham yard bin c

State Government

CTN :45146628

20 May, 2026 NA

Rewa - Madhya Pradesh

Tender For supply of building material and other - cement (ppc—birla/prism/ultratech brands, manufactured within the last 3 months, in 50 kg bags); aggregate (6 mm standard size crushed stone); aggregate (12 mm standard size crushed stone); aggregate (20 mm standard size crushed stone); aggregate (40 mm standard size crushed stone); steel reinforcement bars (isi-marked): 8 mm, 10 mm, 12 mm, 16 mm; allahabad bricks (no. 1, no. 2, no. 3); paver blocks; fly ash bricks (high quality, size: 8" x 4" x 5"); high-grade murrum; stone dust; tiles: kajaria single charge (1' x 2'), johnson single charge (1' x 2'), kamdhenu single charge (1' x 2'), kajaria double charge (1' x 2'), kajaria single charge (1.5' x 2'), johnson single charge (1.5' x 2'), kamdhenu single charge (1.5' x 2'), kajaria double charge (1.5' x 2'), johnson double charge (1.5' x 2'), kamdhenu double charge (1.5' x 2'), kajaria single charge (2' x 2'), johnson single charge (2' x 2'), kamdhenu single charge (2' x 2'), kajaria double charge (2' x 2'), johnson double charge (2' x 2'). kamdhenu double charge 2x2 tiles; kajaria single charge 2x4 tiles; johnson single charge 2x4 tiles; kamdhenu single charge 2x4 tiles; kajaria double charge 2x4 tiles; johnson double charge 2x4 tiles; kamdhenu double charge 2x4; marble; kota stone; oka (9x9x9); lime; ochre (geru); binding wire; biranchi steel t-sections (isi) [delivered on-site, including fittings]; profile sheets (isi) [delivered on-site, including fittings]; high-quality cement sheets [delivered on-site, including fittings]; iron grills/mesh; iron angles; locks; l-drops; stone soling (rough stone); putty (double coat) [delivered on-site, including application]; door frames & doors (sal wood) 7'0" x 3'6" [complete with fittings; wood size: double patti 5"x3"]; door frames & doors (sal wood) 7'0" x 2'9" [complete with fittings; wood size: double patti 4"x3"]; window frames (sal wood) 5'0" x 4'6" [complete with fittings; wood size: double patti 5"x3"]; window frames (sal wood) 4'0" x 4'6" [complete with fittings; wood size: double patti 5"x3"]; door frames (sal wood) 3'0" x 4'6" [complete with fittings; wood size: double patti 5"x3"]; ventilator frames (sal wood) 2'0" x 1'6" [complete with fittings; wood size: double patti 4"x3"]; flush doors (branded company, laminated) 7'0" x 3'6" x 1-1/4". laminated flush door (brand: laminated door brands company), size: 7' x 3' x 1-1/4" (includes complete steel hardware and fittings/locks); door shutter (beeja wood), size: 7' x 3' x 1-1/4" (includes complete steel hardware and fittings/locks); panel door (beeja wood), size: 7' x 3' x 1-1/4" (includes complete hardware, glass, and fittings/locks); window shutter (laminated board), size: 5' x 4' x 1-1/4" (includes complete hardware and fittings/locks); window shutter (laminated board), size: 4' x 4' x 1-1/4" (includes complete hardware and fittings/locks); window shutter (laminated board), size: 3' x 4' x 1-1/4" (includes complete hardware and fittings/locks); window shutter (laminated board), size: 5' x 4' x 1-1/4" (panel shutter; includes complete steel hardware and glass); window shutter (laminated board), size: 4' x 4' x 1-1/4" (panel shutter; includes complete steel hardware and glass); window shutter (beeja wood), size: 3' x 4' x 1-1/4" (panel shutter; includes complete steel hardware, glass, and fittings/locks); aluminum sliding window (per sq. meter; includes material, glass, hylam ply, and fittings/locks; gauge 18/20); aluminum sliding door (per sq. meter; includes material and complete fittings/locks; gauge 16/18/20); ventilator, size: 2' x 1' x 1-1/4"; distemper (white and colored); emersion high-quality paint (white and colored) for interiors; emersion high-quality paint (white and colored) for exteriors; wood polish (clear); brush. 1" brush, 2" brush, 3" brush, 4" brush, 5" brush, 6" brush, paint roller, turpentine oil, starter white (100 ml), paste green (100 ml), paste red (100 ml), mosquito netting, berger paints (white & co

Discharge Gate Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

State Government