Latest discharge loader Tenders | Government discharge loader Tenders

Central Government / Public Sector

CTN :40685457

26 Jun, 2025 24.49 Lacs

Panipat - Haryana

Tender For custom bid for services - rpnc252027 support service for swing extruder vfd installation-shifting, foundation and installation of power transformer- 1. the power transformer is to be installed by construction of new transformer foundation, dismantling/modification of surface, providing chain link fencing on all other 4 sides, cleaning and refurbishment of bay area is in the scope of contractor only. all necessary manpower, tools & tackles, shifting machinery like hydra/crane etc shall be in the scope of contractor only. 2. shifting of power transformer of 7.2 mva onan from store to site, loading-unloading, erection, site storage are in scope of contractor. 3. the basic data sheet and ga drawing of the proposed transformer is attached in scope only. 4. the bidder if required must construct bay width, height and fire walls as per relevant is/iec/oisd standards and site conditions such that adequate clearances for maintenance shall be maintained. bidder to submit the plot plan of equipment layout of transformer layout along with the bid. the bidder shall carryout the site visit for assessment of the available installation space. the total length of the transformer bay should be such that the radiator can be accommodated on either side of transformer tank in the specified bay width. 5. all necessary earth pit provisions, & fire barriers/wall modifications, provision of new hvws water sprinklerbased firefighting system having suitable capacity for protection against the fire & explosion as per the design of supplied transformer and applicable standards & direction of eic. provision of all necessary fire protection system for transformers shall be in the scope of lstk contractor. 6. construction of oil drain facility of transformer as per is standard and hookup with existing burn oil pit. 7. the erection to be certified by contractor as per its recommended procedures which is to be submitted prior to erection. qap for erection and site commissioning shall also to be endorsed by contractor. 8. all kind of lifting, rigging work for loading-unloading, erection work including supply of hydra/ cranes, lifting rigging materials, manpower, tools and tackles as required are in scope of contractor. 9. all kind of skilled, semi-skilled, unskilled manpower as per itc of transformer requirement will be in the scope of contractor. 10. erection includes entire vacuum by proper capacity of vacuum pump, for not less than 48 hours, or more if required as per the instruction of engineer in charge. 11. first filling up of the transformer oil at site, its filtration, site testing oil sample, any refiltration required during final commissioning shall be in the scope of contractor including all tools, tackles and including oil filtration machines. oil may be supplied in drums, which should be properly sealed during transportation and storage. seal shall be verified and opened in front of iocl representative before filling in transformer. contractor should have enough storage capacity for handling oil. filling the oil from drums to the transformer through suitable capacity of high-quality filter machine and filtration of the same to get desired bdv &ppm as specified by engineer in charge and transformer manual. 12. contractor must replace all the gaskets by new ones if required by engineer in charge. 13. the contractor shall arrange nitrogen cylinder required at site for above work. 14. contractor must repaint the transformer tank with two coats of anti-rusting good finish ltbs grey shade 631 of is:5 by spray painting if required and as per the direction of engineer in charge..

Central Government/Public Sector

CTN :40665200

02 Jul, 2025 1.01 Crore

Bathinda - Punjab

Tender For supply of unloading and handling of coal at nfl bathinda - unloading of coal from rail wagons , shifting of stones , coal bunkering , manpower supply for operation of jcb machine , supply of jcb machine, whenever required

CTN :40625624

13 Jun, 2025 5.87 Lacs

Multi City - Karnataka

Tender For supply of matrials to constraction of samashan at konkonakoppa - coarse sand (zone iii) (konkonakoppa samashan), add sundries charges at 1 % on labour (konkonakoppa samashan), add watering charges at 1 % on labour (konkonakoppa samashan), transportation/loading and unloading of material/lifting of material /wastage/unforeseen charges/miscellaneous which are necessary during execution. (konkonakoppa samashan), broken stone aggregate 20 mm size (konkonakoppa samashan), broken stone aggregate 12 mm to 10 mm size (konkonakoppa samashan), portland cement (konkonakoppa samashan), mixer (concrete) - 1 cum capacity (konkonakoppa samashan), add watering charges at 1 % on material (konkonakoppa samashan), add sundries charges at 1 % on material (konkonakoppa samashan), plasticizer / super plasticizer (konkonakoppa samashan), hom of vibrator 0.71 days (konkonakoppa samashan), boulders (konkonakoppa samashan), size stone 20 x 20 x 25 cms (konkonakoppa samashan), bond stone 20 x 20 x 45 cm (konkonakoppa samashan), mixer (concrete small used in culvert) (konkonakoppa samashan), burnt bricks class 35 (non modular) (konkonakoppa samashan), casurina poles 100 - 150 mm (konkonakoppa samashan), add handling , loading and unloading at 1% on material (konkonakoppa samashan), add sundries charges at 2 % on material (konkonakoppa samashan), tmt bars fe 500 (konkonakoppa samashan), binding wire (konkonakoppa samashan), ms angle iron 50mm x 50mm x 6mm, 33.8 metre in length at 4.5 kg per metre (konkonakoppa samashan), ms angle iron 40mm x 40mm x 6mm, 23 metre in length at 3.5 kg per metre (konkonakoppa samashan), gusset plates 6 mm thick (konkonakoppa samashan), base plate / base plate (konkonakoppa samashan), anchor bolts 750mm (konkonakoppa samashan), corbon electrodes (konkonakoppa samashan), welder grade i (konkonakoppa samashan), hom of welding and grinding machine (konkonakoppa samashan), add (konkonakoppa samashan), hom of cutting and grinding machine (konkonakoppa samashan), ready mix primer paint (ready mix red lead paint) (konkonakoppa samashan), add wire brush, fine steel wool, putty, sand paper, at 3% on cost of paint (konkonakoppa samashan), painter class i (konkonakoppa samashan), add providing and removing scaffolding at 3% on labour (konkonakoppa samashan), add handling , loading and unloading at 2% on material (konkonakoppa samashan), enamel metal paint (konkonakoppa samashan), add brush at 1% on cost of paint (konkonakoppa samashan), tools and plants and electrical charges at 2% (konkonakoppa samashan), unit cost as per the specification (konkonakoppa samashan), mason class i (with tools) (konkonakoppa samashan), water proofing cement paint (konkonakoppa samashan), add brush, putty, sand paper at 2% on cost of paint (konkonakoppa samashan), wire mesh 50mm x 50mm (konkonakoppa samashan), aluminium paint (konkonakoppa samashan), fitter class i (konkonakoppa samashan), welding charges at 10% on material (konkonakoppa samashan), a 50 mm dia ms hollow pipe b class 14 gauge (konkonakoppa samashan), a 16 x 16 mm ms square rod (konkonakoppa samashan), a 36 mm x 6mm ms plates (konkonakoppa samashan), a 40 x 6 mm ms plates (konkonakoppa samashan), cast iron spike (konkonakoppa samashan), ball bearing hinges heavy duty (konkonakoppa samashan), anticorrosive bituminous paint (black) (konkonakoppa samashan), mechanic class ii/mechanic hmp grade i/eme grade (konkonakoppa samashan), hom of cutting and grinding machine - 1 (konkonakoppa samashan), tools and plants at 2% on material (konkonakoppa samashan), transportation loading and unloading at1% on material (konkonakoppa samashan), moulding charges for casting gaurd stones (konkonakoppa samashan), laboratory asst. (sslc passed)/mate/supervisor (konkonakoppa samashan), tractor - 40 hp (konkonakoppa samashan), a 12 x 12 gauge g.i. wire 100 mtr at ts. 8.00/ per m (konkonakoppa samashan)

CTN :40555450

16 Jun, 2025 11.94 Lacs

Multi City - Karnataka

Tender For corrigendum : supplying of construction material for galagi hulakoppa nrlm shed construction. - broken stone aggregate 40 mm size_glgh, broken stone aggregate 20 mm size_glgh, broken stone aggregate 12 mm to 10 mm size_glgh, binding wire_glgh, mild steel rods_glgh, mild steel_glgh, formwork, centering and scaffolding for beams and lintels - ( 106 sqm area)_glgh, formwork, centering and scaffolding for coloumns - ( 101 sqm area)_glgh, formwork, centering and scaffolding for slab - ( 108 sqm area)_glgh, first quality glazed wall tiles_glgh, white cement based putty_glgh, enamel paint_glgh, super plastisizers_glgh, mixer (concrete) - 1 cum capacity_glgh, mathi or nandi wood_glgh, aluuminium window frame section 1.20 mm thick_glgh, aluminum tower bolts_glgh, rubber beading for shutters beading_glgh, cleat angles_glgh, glass panes_glgh, glazed tiles 1st qulaity 300 x 300 mm_glgh, polyethylene water storage tank with cover and suitable locking arrangement_glgh, upvc pipes 25 mm nominal dia_glgh, providing and fixing brass bib cock of approved quality 20 mm nominal bore_glgh, white vitreous china orissa pattern w.c. pan of size 580 x 440 mm with integral type foot rests_glgh, display board_glgh, needle vibrator including operation and maintenace_glgh , hom of welding and grinding machine, wood cutting other charges_glgh, brush, putty, sand paper,roller etc. charges_glgh, providing anf removing scaffolding_glgh, handling, loading and unloading charges _glgh, electrification -5%_glgh, m sand (zone iii)_glgh, ordinary portland cement_glgh, size stone 20 x 20 x 23 cms_glgh, bond stone 200 mm thick_glgh, stone boulders 300 mm thick_glgh, solid concrete block of 150 mm thickness having min strength of 5 n per sqmm_glgh, vitrified tiles of size 60 cm x 60 cm_glgh, plastic acrylic emulsion paint_glgh, tmt bars fe 550_glgh

Central Government And Public Sector

CTN :40606334

26 Jun, 2025 NA

Chittorgarh - Rajasthan

Tender For supply of compressor-1 , compressor-2 , compressor gasket and o ring set , oil supply line , evaporator rear head , service angle valve , condenser front head assy , condenser rear head assy , butterfly valve , nrv , expansion valve , angle valve , liquid sight glass , float valve , condenser tube , evaporator copper tube , evapo. sup. heat zone copper tube , lubricant oil , oil filter , filter drier core , oil filter o ring , drier filter assy , safety valve , drain valve , liquid line angle valve , liquid line sight glass , oil supply line angle valve , condenser sight glass , loading unloading sov , check valve , tube cleaning brushing machine , centri compressor , oil sump assy , rear head assy , head , sight glass , angle valve , way valve , head gasket , filter drier , solenoid valve , strainer , exp valve body , plate he , water regulating valve , way valve comp , angle valv , victaulic clamp , oil filter , filter-tube , safety valve , lubricant

Co-operative

CTN :40595340

16 Jun, 2025 65.0 Thousand

Mehsana - Gujarat

Tender For job work at scm plant new hffs packing machine loading and unloading,shifting and positioning service job work

Central Government/Public Sector

CTN :40622063

16 Jun, 2025 NA

Mancheshwar - Odisha

Tender For supply of transportation of imported railway consignments, 22 skids/cases of spares of (rgm-96) rail grinding machine stone, package (packing slip att ached) including unloading at ultimate consignee by transporter, dimension: dimension of each skids/cases: 22 skids/cases: 36 x 36 x 42" @ 826.90 kgs ea ch, wt: 0.826 mt each, total weight: 18.19 mts. from nhava sheva/mumbai to assistant executive engineer - track machine satellite depot, opposite to am battur railway station, southern railway, chennai - 600053.contact person: - assistant executive engineer - 8400962440 ]

CTN :40555517

16 Jun, 2025 23.50 Lacs

Multi City - Karnataka

Tender For supply of various materials for construction of new works in chndapurgp limit under mahatma gandhi national rural employment guarantee scheme - mr9904-bib cock 20mm nominal bore, mr9473-granite stone slabs fine dressed 40 mm thick, mr9452-cleat angles gpbada, mr9451-chrominum plated screws gpbada, mr9445-casurina poles 75 - 100 mm dia gpbada, mr9444-casurina poles 100 - 150 mm gpbada, mr9433-broken stone aggregate 40 mm size gpbada, broken stone aggregate 12 mm to 10 mm size gpbada, bond stone 20 x 20 x 45 cm gpbada, aluminium window frame section 1.20 mm thick gpbada, alluminium tower bolt - 20 cm gpbada, alluminium handles - 15 mm gpbada, handling loading and unloading 3% on material gpbada, water storage tank gpbada, m.s rods gpbada, pvc beading gpbada, chlorinated polyvinyl-25 mm outer dia gpbada, binding wire gpbada, plasticizer / super plasticizer gpbada, display board_cib gpbada, electrification gpbada, coarse sand (zone iii) gpbada, water proofing cement paint gpbada, portland cement gpbada, mr9684-water tanker gpbada, mr9683-vibratory roller 8 tonne gpbada, mr9502-water gpbada, mr9475-gravel 2.36 mm/murrum gpbada, mr9471-granite metal 40 mm gpbada, mr9470-granite metal 20 mm gpbada, mr9458-crushed stone course aggregate 53 gpbada, mr9457-crushed stone chippings 13.2 mm gpbada, mr9434-burnt bricks class 35 (non modular) gpbada, mr9426-boulders gpbada, mr9738-add brush, putty, sand paper at 2% on cost of paint gpbada, mr9991-granite sink 23cm thick gpbada, mr9953-vitrified tiles 600x600 mm gpbada, mr9817-ms flat gpbada, mr9773-add watering charges at 1 % on material gpbada, mr9759-add providing and removing scaffolding at 3% on labour gpbada, mr9755-add hom of welding and grinding machine 4per on material gpbada, add hom of welding and grinding machine 2per on material gpbada, mr9498-mathi/nandi wood planks for panels 25 mm thick gpbada, mr9491-liquid wood filler gpbada, mr9487-jungle wood runners and planks gpbada, mr9463-enamel metal paint gpbada, mr9459-cudddapah slab 2.5 cms thick gpbada, broken stone aggregate 20 mm size gpbada, thick plain glass gpbada, miscellaneous harges gpbada, mr9753-add handling , loading and unloading at 2% on material gpbada, mr9752-add handling , loading and unloading at 1% on material gpbada, mr9749-add cutting and other wastage 5% gpbada, mr9727-add 15% wastage for glass gpbada, mr9725-mason class i (with tools) gpbada, mr9690-painter class i gpbada, mr9688-unit cost as per the specification gpbada, mr9678-mixer (concrete) - 1 cum capacity gpbada, mr9677-mixer (concrete small used in culvert) gpbada, mr9675-hom of vibrator 0.71 days gpbada, mr9640-brick gpbada, mr9607-welder grade i gpbada, mr9606-stone dresser (with tools) gpbada, mr9598-fitter class i gpbada, mr9597-fabricator gpbada, mr9554-tmt bars fe 500 gpbada, mr9535-size stone 20 x 20 x 25 cms gpbada, mr9534-silver oak or equivalent planks 38 mm thick gpbada, mr9528-rubble stones gpbada, mr9527-rubber beading for shutters beading gpbada, mr9510-pigment gpbada, mr9508-nylon rollers gpbada, labour charges 7% on materialgpbada, mr9499-mathi/nandi wood scantling gpbada

Central Government And Public Sector

CTN :40540419

27 Jun, 2025 NA

Chamba - Himachal Pradesh

Tender For supply of supply of trash rack cleaning machine complete in all respect , transportation (including insurance charges up to project site) of trcm , erection testing & commissioning of trash rack cleaning machine complete in all respect , self- unloading trash disposal metal body truck, tipper type , dismantling, proper tagging of dismantled existing trash rack cleaning machine , mandatory spare parts (as per statement - 1a)

CTN :40537558

18 Jun, 2025 6.32 Lacs

Chikkodi - Karnataka

Tender For construction of a compound at the government high school in jodakurali villageof chikodi taluka. - tools and plants at 2% of material, hom of cutting and grinding machine-1., hom of welding and grinding machine.,, mechanic class ii / mechanic hmp grade i/eme grade, welder grade i,, anticorrosive bituminous paint( black), ball bearing hinges duty,, cast iron spike,, a 40x6 mm ms plates, a 36mmx6mm ms plates, a 16x16mm ms square rod, a 50mm dia ms hollow pipe b class 14 guage, painter class i.,, add brush, putty, sand paper at 2% on cost of paint.,., water proofing cement paint,., add providing and removing scaffolding at 3% on labour.,, broken stone aggregate 40 mm size,, add handling loading and unloading at 1% on material.,, stone chistler class - ii, mason class ii (with tools).,., mason class i (with tools).,.,, mixer (concrete small used in culvert.), boulders.,, bond stone 20 x 20 x 45 cm.,, size stone 20 x 20 x 25 cms.,, binding wire,., tmt bars fe 500,., hom of vibrator 0.71 days.,, plasticizer / super plasticizer.,., add handling loading and unloading at 2% on material.,, bolts and nuts,, ms flat,., casurina poles 100 - 150 mm.,, silver oak, or equivalent planks 38 mm thick.,, jungle wood runners and plank.,, add watering charges at 1 % on material.,, mixer (concrete) - 1 cum capacity.,, portland cement,., coarse sand (zone iii),, broken stone aggregate 12 mm to 10 mm size,, broken stone aggregate 20 mm size,, licenced blaster., drilling mechanic grade i., safety fuse wire., detonators., special gelatin., drilling equipment.

Discharge Loader Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government / Public Sector

Central Government/Public Sector

Central Government And Public Sector

Co-operative

Central Government/Public Sector

Central Government And Public Sector