Latest discharge pipe Tenders | Government discharge pipe Tenders

CTN :40506872

18 Jun, 2025 NA

North 24 Paragana - West Bengal

Tender For purchase of spares - weasher 3 by 8 inch bsf , o ring , nut brush terminal(os sl no-187) , bearing cap bolt(os sl no-7) , spnr de 14x15mm(ces cps260) , bolt self lock 1.5 inch f by whsg , hexagon socket screw (os sl no-142) , stud for silencer connection , set screw for front cover(os sl no-157) , nut cyl head , o ring , dowel pin (os sl no-133) , joint (os sl no-140) , joint (os sl no-111) , nut for air cleaner mtg stud (os sl no-149) , spl screw 5 by 16 bsf , o ring for rocker bracket , stud 5 by 16 inch x 1.25 inch long , joint , bearing bush de , joint for transfer block (os sl no-122) , joint (os sl no- 128) , bolt crankshaft to adaptor , special simmonds nut , spring , stud for injector pipe clamp , locking plate (os sl no-16) , joint (os sl no-103) , shim 0.0003 feet thick (os sl no-131) , shim 0.0005 feet thick(os sl no-132) , gasket(os sl no-188) , hose 9 by 16-0.5mtr , gasket , joint (os sl no-141) , o ring for delivery pipe flange , bolt (ms sl no-117) , joint for air clearance base (os sl no-150) , insulating washer (os sl no-190) , rubber faced washer for cyl head cover (os sl no-1 , stud cyl head to ex manifold (os sl no-151) , valve cap(p-21) , timing pointer (os sl no-58) , bolt fly wheel (p-57) , abutment washer , rubber shroud (os sl no-137) , split pin (os sl no-207) , jublee clip (os sl no-255) , exhaust manifold gasket (os sl no-153) , gasket cover cylinder(chicago260) , joint timing case to back plate , circlip (os sl no-202) , plug (p-37) , joint back plate to crank case , plier insulated 150mm(ces-34) , joint for inlet manifold (os sl no-148) , joint for rear cover (os sl no-163) , o ring (p-11) , o ring (os sl no-121) , joint for front cover (os sl no-159) , locator pos terminal (os sl no-191) , ferrule , connection piece , gasket for discharge pipe , gasket for discharge pipe , grease cap 3 by 8 bsf(chicago) , oil seal (os sl no-129) , insulator washer (os sl no-192) , filer element assy , joint for side cover rh rear (os sl no-162) , brush spring , spring inner , hammer engineer ballpein 0.5 kg , brush(a l page-109) , hose 9 by 16-1.8mtr , bearing bush , o ring (os sl no-96) , felt pad (os sl no-224) , banjo bolt , tab washer , joint crankshaft seal hsg to f by w hsg (os sl no-66) , insulator (os sl no-186) , tee coonection(p-13) , hose 9 by 16-2mtr , brush connector positive , valve spring , valve , l bracket (p-55) , dowel pin(dia14x30)(ces-33) , joint for side cover rear to c by c(os sl no-161) , centre tube (os sl no-155) , bolt , main bearing cap (p-7) , bush assembly , ceramic insert (os sl no-136) , joint (ms sl no-16) , heatsink assy positive , bushing body o pump (p-7) , s assy of pipe feed pump to filter (os sl no-102) , covering plate (os sl no-70) , oil seal , oil seal burton wood(ctlg p-23) , oil relief valve(ms sl no-03) , anti vibration mount(p-25) , set screw (os sl no-50) , oil filter cap (os sl no-167) , s assy of pipe feed pump to filter (os sl no-104) , tee connection(p-13) , s a of pipe filter to fuel pump(os sl no-105) , spring (pinion)(os sl no-212) , fan belt (oem) , auxiliary diode , insulator (os sl no-195) , kit thrust washer(os sl no-4) , plug(p-29) , water pump seal (os sl no-135) , o ring (p-29) , lead assy y positive (os sl no-189) , o ring(p-3) , s a of pipe oil , c e bearing (os sl no-231) , regulator , flexible hose(p-29) , roller bearing hofman (os sl no-83) , ball bearing hoffman (os sl no-84) , o ring(p-3) , front cover (os sl no-156) , taper roller bearing (os sl no-130) , heat sink assy aux (os sl no-197) , driving shaft (os sl no-134) , joint housing to back plate(ms sl no-67) , bush assembling kit(p-61) , element filter , filter service indicator(chicago p-20) , liner cyl s by s outer dia y (p-7) , de bearing , p2p controller service kit(os em r655 dt 01.02.19) , bearing sre , hose filter to fuel pump , rotor assy(a l page-99) , ring set(p-15) , cable(p-11) , kit main bearing(chicago) , oil by pass valve , s a of fan 19.5 in dia 6 blade (os sl no-125) , thermo

Central Government / Public Sector

CTN :40500545

26 Jun, 2025 NA

Vijayawada - Andhra Pradesh

Tender For 2kg portable co2 type fire extinguisher along with discharge pipe & horn as per clw spec. n o. clw/ms/3/016 alt - 2 or latest if any and clw drg. no. 1209-13.240-025 alt - 4 or latest if any for 3-phas e locos. note: one sample should be got approved before effecting bulk supply. [ warranty period: 30 mo nths after the date of delivery ]

Central Government/Public Sector

CTN :39926407

27 May, 2025 NA

Goa - Goa

Tender For bid to ras bid to ras corrigendum : supply of suction and discharge pipes

State Government

CTN :40402477

09 Jun, 2025 NA

Chandrapur - Maharashtra

Tender For work of replacement of coal discharge pipe (508x12), bends, mill outlet elbows, victaulic coupling of coal mill xrp-803 during unit 4 aoh, at cstps chandrapur.

State Government

CTN :40359370

28 May, 2025 NA

Chandrapur - Maharashtra

Tender For procurement of trunion shaft bushing and victaulic coupling gaskets for coal discharge pipes size 18l and 20l for coal mill for u#4 aoh, cstps, chandrapur.

Central Government/Public Sector

CTN :40434748

12 Jun, 2025 NA

Delhi - Delhi

Tender For laying of etp discharge pipeline at paradip

CTN :40423805

31 May, 2025 NA

Darjeeling - West Bengal

Tender For construction of hardened amn bkr (30 mt ) under the aor of hq 27 mtn div - part i :concrete , plastering work and water proofing compoundpart ii : reinforcementpart iii : centering shuttering & formwork, pre-fabricated mild steel door of size 1100x1700mm outer frame made out of isa 40x40x6mm and door shutter frame of isa 35x35x5mm and all as stiffner of isa 30x30x3mm as per drawing, app bitumen membrane sheet of grade 2504 thickness 3.0mm type film, size 20mx1m, minumum weight 2.25kg/sqm,, polythene membrane sheet of grade 2504 thickness 150micron, hdpe sand bag of size 34 x14 inside insulated interlocking stitch weight of the bag is42-45 gram/bag, anti freezing compound approved by accepting officer / confirming to latest is standards, water proofing compound in 1 kg packing,, pre-fab steel jally made up of isa 30x30x3mm frame and cover frame made of 25x25x3mm and 10 mm dia bars in jally @ 25mm centre to centre bothways welded to frame of size 900x900mm complete all as per rfp & drg ., pre painted cgi sheet 2100mm x 800mm x 0.63mm,, 50mm thk pcc jumbo interlocking coloured tiles,each tile covering and area of 0.0264sqm (0.12mx 0.22m), confirming to is- 15658-2006, alkaline pipe 50mm dia., fire resistance paint for internal surface., fire resistance primer for internal wall surfaces, synthetic enamels painting to steel surfaces as specified., red oxide primer., bitumen 80/20 grade,, structural steel ismb300, 6.60 mtr length (roof beam), shs 75x75x5mm 6.60 mtr length (roof beam), deck sheet-1.0mm tr-80 grade,350, 12mm thick ms base plate of size 0.30x0.30 mtr (column), 5mm thick ms plate of size 0.300x 0.40 mtr(90 degree angle), anchor bolt of 20mm dia,0.45mtr length, hdpe pipe(rain water pipe) 75mm dia best quality, hdpe hose pipe 25mm dia (bore) corrosion resistant for water supply pumping water with min thickness of 0.25mm with working pressure 14.22 psi and bursting pressure 28.44 psi., 1hp petrol water pump of capacity 35cc 4 stroke pertol engine 25mm self priming water pump set. make : kirloskar, crompton, honda and quivalent., fire extinguisher a/b/c type portable net 2 kg capactiy cylindrical isi marked (bis 15683 : 2006 range > 2 mtrs (minimum) with discharge pipe & nozzle complete and suitable bucket for hanging on wall., lighting conductors set complete with all accessories as per details given below:-(a) zinc & alloy coated safe earthing electrode (76.3mm dia) 2mtr long with back filled compound conduct lite - 2 bags cpri approved.(b) air terminal four pointed aluminium rod 12mm dia and 600mm long fitted on gi pipe.(c) gi pipe med grade 06 mtr long 40mm dia. make: tata/ jindal/ bansal.(d) epoxy insulator with screw 10 nos.(e) copper cable 35 sqmm multi-stranded single core. make : plaza/ havells/ rallison/ isi-10 r/m.(f) testing points terminal box made out of gun metal or phosphorous of size 75 x 75 x 25mm with screw.(g) nut & bolts 2" x 1/2" - 08 nos(h) foundation nuts & bolts 16mm x 400mm - 4 nos(j) frp earthing pit with cover -01 nos(k) copper lugs 35 sqmm for connection of cable with nut & bolt of suitable size - 02 nos, electric earthing set complete with items as given below :-(a) gi earthing plate 600mm x 600mm x 6mm thick with two nos holes - 01 no.(b) gi pipe15mm dia light grade for the protection of gi wire, make : tata/jindal/prakash - 8 mtr.(c) gi pipe 20mm light grade for watering, make : tata/jindal/prakash - 1.2 mtr.(d) gi wire 4mm dia - 02 kgs.(e) gi funnel with wire mesh suitable for 20mm dia gi pipe - 1 no(f) common salt - 50 kgs.(g) frp earthing pit with cover - 01 no.(h) gi nut bolt with washer of size 10mm dia 25mm long - 2 nos. (h) charcoal - 50 kgs., supply and installation solar lantern model no ms122 solar lantern contains battery , solar pannel, led bulbs and automatic charging of working time 25 hours and led life time 40000 hrs , solar pannel of 5w li-ion type battery 2200 mah capacity of volt 7.4v, supply and installation luminous solar inverter & battery

CTN :40433256

07 Jun, 2025 1.35 Lacs

Purulia - West Bengal

Tender For service contract for the job of dismantling of damaged discharge pipe (ms,400 nb) from u6 coal bunker floor to ground floor near coal mill -6a under chp-mm dept., stps, wbpdcl

Central Government/Public Sector

CTN :40419721

28 May, 2025 NA

Vadodara - Gujarat

Tender For supply of discharge pipe (100 n.b.) with flanges welded assy. as per rdso's drg.no.wd-86081-s-66, alt-14, item nos.3,7,13 & 14.material to is:2062- 2006, amnd.2 of june 2011, gr.e 250 a is also acceptable. as per amm(c&w) prtn letter dt.09-10-2014 make aac nil. specn: u [ warr anty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :40411329

02 Jun, 2025 NA

Chennai - Tamil Nadu

Tender For supply of discharge pipe 100mm dia (heavy) for btpn tank wagons to drg. no.- wd-86081-s-66, alt- 1 6, item 3,7,13 & 14. [ warranty period: 30 months after the date of delivery ]

Discharge Pipe Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government / Public Sector

Central Government/Public Sector

State Government

State Government

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector