Latest discharge pump Tenders | Government discharge pump Tenders

Central Government/Public Sector

CTN :45282720

25 Jun, 2026 NA

Sundergarh - Odisha

Tender For bid to ras bid to ras supply of carbonaceous hearth grouting material -carbonaceous hearth groutingmaterial paste for blast furnace suitablefor injection through shell wallby pressure pump to arrest gasand flame leakages. shelf lifeminimum 120 days after receiptin rsp with good fluidity.

State Government

CTN :45596388

23 Jun, 2026 NA

Delhi - Delhi

Tender For supply, installation, testing and commissioning of electrical and mechanical equipments for shallow bore tube wells phatak bans,sawar khan, chatta mom gran, lal darwaza in matia mahal constituency ac-21. - s/o submersible pump set fitted with dynamically balanced ep impeller mounted on stainless steel shaft protection sleeve ep stage bowl of closed grained shorted type impeller. the pump will be directly coupled to required wet type induction motor of speed 2900 rpm suitable for operation on three phase ac, 415 volts ,50hz, 5 hp, model no j46, head-70 mtrs, discharge-200 lpm. make:bs/ksb/crompton/djb approved, supply of automatic lt panel board suitable for 415 volts, 3 phase, 50 hz, 4 wire system for operation of up to 15 hp submersible set, made out of not less than 2 mm thick crca for load bearing members and 1.6 mm for doors of panel, totally enclosed, dust and vermin proof, floor mounted type. the panel size 760 mmx 1360 mm x300 mm and having (1) 63 amp change over- 1 no (2) 63 a tpn mccb -1 no (3) amp meter 0-50 a- 1 no (4) voltmeter 1 no (5) amp & volt meter selector switches-1 set (6) auto-manual + light + control mcb tp 32 amp- 1nos each (7) ct -3nos (8) push button + on/off light 2 nos each (9) 5 kvar shunt capacitor- 1 no (10) aluminium bus bar size 25 mm x 6 mm - 1set (11) 15 hp star delta starter (a) 32 amp power contactor-3 nos (b) overload relay 14-23 a -1 no (c) star delta timer- 1 no ( d) qt timer -24 hours -1 no (e) motor protection relay 200 short circuit, earth fault, phase loss, unbalance, phase reversal, locked rotor protection make:-subtec/protech/ l&t/all djb approved make, s/o pvc insulated flat submersible cable with copper conductor having three core size 2.5 sq mm 1100 volts(100mtr per roll). make- gloster/universal/havells/grandlay/djb approved, s/o g.i pipe 40mm dia medium class with threaded externally on both end socketed 6mtr long. make- jindal/tata., s/o g.i tail piece 40mm dia 600mm long medium class with threaded externally on both end. make- tata/jindal, s/o gi socket 40 mm dia with threaded internally. make: jindal/tata/djb approved, s/o gi elbow with both end having thread, size- 40mm. make: jindal/tata/djb approved, s/o gi reducer having thread on boyh end, size: 50mm to 40mm. make: jindal/tata/djb approved, s/o gi union having thread on both end, size: 40mm. make: jindal/tata/djb approved, s/o ms clamp of 600mm long 12mm thick complete with nut & bolts and washers for holding 40 mm dia pipe i/c bending & shaping etc., supply of ms bore cover 6 mm thick suitable for 100 mm dia casing in 2 pieces complete with bolting arrangement angle iron frame and provision of 40 mm dia hole in the center., supply of pvc suction hose pipe 50 mm dia 30 mtr long.make-jyoti/isi, installation of submersible pump set with pipe and other accessories, connection of cable, installation of electric panel, grouting of electric panel digging and fixing the same with the help of cc and laying of gi pipe from bore to panel executing minor civil making electrical connection with cable as required size i/c watch and ward cartage, taking all safety measures all tools and tackles. testing and commissioning of all e&m equipment on no load and full load conditions as per standard and full satisfaction of engineer-in- charge. this is a turnkey job and it further includes any left out items which may be required during execution of work will be firm responsibility & no extra payment will be paid. - s/o submersible pump set fitted with dynamically balanced ep impeller mounted on stainless steel shaft protection sleeve ep stage bowl of closed grained shorted type impeller. the pump will be directly coupled to required wet type induction motor of speed 2900 rpm suitable for operation on three phase ac, 415 volts ,50hz, 5 hp, model no j46, head-70 mtrs, discharge-200 lpm. make:bs/ksb/crompton/djb approved, supply of automatic lt panel board suitable for 415 volts, 3 phase, 50 hz, 4 wire system for opera

CTN :45564441

22 Jun, 2026 NA

Mumbai - Maharashtra

Tender For providing services of comprehensive operation and maintenance of vehicle mounted high discharge pump units (firex machines), 01 no, for cleaning of storm water drains under the section of dy.ch.e.(o&m)swd.tender id 2026_mcgm_1307942_1

CTN :45540330

22 Jun, 2026 NA

Mumbai - Maharashtra

Tender For providing services of comprehensive operation and maintenance of vehicle mounted high discharge pump units firex machine 01 nos for cleaning of storm water drains under the section of dy.ch.e.o and m swd.

CTN :45498922

20 Jun, 2026 42.97 Lacs

West Kameng - Arunachal Pradesh

Tender For supply of pc stand 12.7 mm dia 7 pay class 11 having ultimate tensilestrength not less than 187 kg per sqmm , sheathing corrugated hdpe pipe , anchorage cone 12 t 13 , bearing plate 12 t 13 , coupler for sheathing pipe , sheathing tape 3 inch thick , profiler for pre stressing cable , multipull pre stressing jack 4000 mg sutaible for 19t13 hydraulic jack with hydraulic pump as per specification enclosed , grouting pump with agitator , drainage spout 210 x 210 mm , strip seal expansion joint 11.40 mtr long , neoprene rubber pad size 900 mm x 580 mm x 10 mm neopene pad 580 x 10 th as per specification enclose

State Government

CTN :45494998

01 Jul, 2026 98.0 Thousand

Multi City - Chhattisgarh

Tender For modification of speed breakers in btg area & base frame grouting of pump foundation of ash slurry pump house & geho pump house at 2x500mw, abvtps cspgcl marwamodification of speed breakers in btg area & base frame grouting of pump foundation of ash slurry pump house & geho pump house at 2x500mw, abvtps cspgcl marwa.

State Government

CTN :45425323

11 Jun, 2026 18.73 Lacs

Delhi - Delhi

Tender For supply, installation, testing and commissioning of sewage and rain water discharge pumps along with cable, earthing etc. for e1-e2 road, vasant kunj. - maintenance of various colonies under south zone. sh:- sitc of sewage & rain water discharge pumps along with cable, earthing etc. for e1-e2 road, vasant kunj.

Central Government And Public Sector

CTN :45373187

09 Jun, 2026 NA

Multi City - Multi State

Tender For tender for supply of spares for centrifuge - suction pump assembly pump no 538718 to 83 , paring disc , level ring 65mm , elastic plate for frictinpt no 518484 to 01 , friction block 50hz pt no 526769 to 84 , friction block 527983 to 80 for mab 205 s , worm wheel shaft , flexible coupling pt no 538574 to 80 , bowl spindle 563004 01 , impeller , impeller with long shaft , impeller discharge pump of centrifuse , impeller with long shaft

corporations/Associations/Others

CTN :45339670

29 May, 2026 NA

Almora - Uttarakhand

Tender For auction sale of scrap from works / products old & used gi sheet,scrap reinforcement steel ms from works / products smallcut pieces aii sizes,miscellaneous ms scrap,scrap structural steel ms micro sillca silo 15mt cap.,transit mixer drum capacity 6cum make schwing stetter model am 6 qty 1 no,air compressor 2stage 2cyl 15hp,air compressor 2 stage 2 cylinder 15hp 40-60 cfm - 7kg/sqcm qty 1 no.,grouting pump type

CTN :45072324

01 Jun, 2026 NA

Kanpur - Uttar Pradesh

Tender For supply of alfa laval make centrifuges d d - st020090516 worm wheel shaft with item code 531430 80 for oil centrifuge model no. mab103 make alfa laval , st020090604 nipple with item code 517839 81 for water adding device in oil centrifuge model no. mab103 make alfa laval , st020090609 rectangular ring with item code 190609 for water adding device in oil centrifuge model no. mab103 make alfa laval , st020090596 glass with item code 517843 01 for water adding device in oil centrifuge model no. mab103 make alfa laval , st020090597 holder with item code 517841 02 for water adding device in oil centrifuge model no. mab103 make alfa laval , st020090603 needle valve with item code 517846 01 for water adding device in oil centrifuge model no. mab103 make alfa laval , st020090598 hose nipple with item code 252612 02 for water adding device in oil centrifuge model no. mab103 make alfa laval , st020090610 revolution counter with item code 62813 for frame with collecting cover in oil centrifuge model no. mab103 make alfa laval , st020090611 screw with item code 72889 for frame with collecting cover in oil centrifuge model no. mab103 make alfa laval , st020090605 pin with item code 222116 18 for frame with collecting cover in oil centrifuge model no. mab103 make alfa laval , st020090590 cap nut with item code 536738 01 for frame with collecting cover in oil centrifuge model no. mab103 make alfa laval , st020090594 fixing plate with item code 8390 for frame with collecting cover in oil centrifuge model no. mab103 make alfa laval , st020090595 gasket with item code 8392 for frame with collecting cover in oil centrifuge model no. mab103 make alfa laval , st020090600 lock ring pbyn 37168 replaced by 502050 01 with item code 502050 01 for frame with collecting cover in oil centrifuge model no. mab103 make alfa laval , st020090602 lock screw with item code 6924 for frame with collecting cover in oil centrifuge model no. mab103 make alfa laval , st020090619 spring with item code 33355 for frame with collecting cover in oil centrifuge model no. mab103 make alfa laval , st020090621 top bearing assembly consisting of ball bearing spring casing buffer spring screw plug sleeve with item code 64820 for frame with collecting cover in oil centrifuge mab103alfa laval , st020090615 screw for srg509 2211721 13 has been replaced by 2211722 30 with item code 2211722 30 for frame with collecting cover in oil centrifuge model no. mab103 make alfa laval , st020090607 protecting collar with item code 14166 for frame with collecting cover in oil centrifuge model no. mab103 make alfa laval , st020090601 lock ring with item code 522981 01 for seperator bowl in oil centrifuge model no. mab103 make alfa laval , st020090599 lock ring with item code 30282 for seperator bowl in oil centrifuge model no. mab103 make alfa laval , st020090589 cap nut with item code 522997 01 for seperator bowl in oil centrifuge model no. mab103 make alfa laval , st020090588 bowl disc with item code 522990 81 for seperator bowl in oil centrifuge model no. mab103 make alfa laval , st020090591 collar with item code 532953 01 for drive device horizontal in oil centrifuge model no. mab103 make alfa laval , st020090614 screw with item code 2217751 01 for drive device horizontal in oil centrifuge model no. mab103 make alfa laval , st020090592 coupling disc with item code 527766 80 for drive device horizontal in oil centrifuge model no. mab103 make alfa laval , st020090613 screw with item code 221585 13 for drive device horizontal in oil //bid details 2 / 52 centrifuge model no. mab103 make alfa laval , st020090586 washer with item code 41456 for drive device horizontal in oil centrifuge model no. mab103 make alfa laval , st020090606 pin with item code 8114 for drive device horizontal in oil centrifuge model no. mab103 make alfa laval , st020090618 sleeve with item code 529208 80 for feed and discharge pump in oil centrifuge model no. mab103 make alfa laval , st020090617 sleeve with item code 529206

Discharge Pump Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

State Government

State Government

Central Government And Public Sector

corporations/Associations/Others