Latest discharge rod Tenders | Government discharge rod Tenders

Central Government/Public Sector

CTN :45733111

09 Jul, 2026 NA

Multi City - Uttar Pradesh

Tender For auction sale of rolling stock - ms scrap cut of condemned wagons 8 wheeler (b.g.) with out wheel set and trolly delivery on nagra siding condition wagon no.(1)er 72029563125 bobr (2 )er 72029577863 bobr (3)se 10079663020 boxn (4)nr 99038713280 brhn (5)er 99028736237 brhn (6)er 72029560995 bobr (7) wr 10089560210 boxn note:- delivery on actual weighment basis. maximum permissible deliverable quantity is lot qty. 07 nos (83.990 mts) cutting allowed for easy loading returnable items will not be delivered and will be returned by the purchaser as per the lists attached at the sr. no. 18,19 and 20 in the special condition for sale attached with the auction catalogue in returnable items list centre pivot retainer will be add and sab control rod head as sab with control rod, not returnable items 1. foot step 2. loaded tie rod 3. sets of pipe lot qty. on approx basis weight 07 nos (83.990 mts) advice n0te no.-25-03287 dt-02.03.26,25-03316 dt-20.03.26 and 25-03385 dt-20.03.26 note:- wagon lots to be sold on number basis and delivery in mts basis, purchaser should read the nagra siding condition of special condition of e- auction governing the sale and satisfy themselves before bidding.note-as per e-auction terms and condition goverining sale of scrap material through e-auction (revised on 07.05.2026), delivery of any scrap lot shall be permitted only after receipt of full sale value of sold lot

Central Government/Public Sector

CTN :45733112

09 Jul, 2026 NA

Multi City - Uttar Pradesh

Tender For auction sale of rolling stock - ms scrap cut of condemned wagons 8 wheeler (b.g.) with out wheel set and trolly delivery on nagra siding condition wagon no.(1)er 12029801919 boxnhs (2 )er 72029563699 bobr (3)er 72029561718 bobr (4)se 12079660047 boxnhs (5)se 10079763133 boxnhs (6)er 72029562241 bobr (7) se 99079243807 brhn note:- delivery on actual weighment basis. maximum permissible deliverable quantity is lot qty. 07 nos (75.370mts) cutting allowed for easy loading returnable items will not be delivered and will be returned by the purchaser as per the lists attached at the sr. no. 18,19 and 20 in the special condition for sale attached with the auction catalogue in returnable items list centre pivot retainer will be add and sab control rod head as sab with control rod, not returnable items 1. foot step 2. loaded tie rod 3. sets of pipe lot qty. on approx basis weight 07 nos (75.370 mts) advice n0te no.-25-03316 dt-20.03.26,25-03287 dt-02.03.26 and 25-03385 dt-20.03.26 note:- wagon lots to be sold on number basis and delivery in mts basis, purchaser should read the nagra siding condition of special condition of e- auction governing the sale and satisfy themselves before bidding.note-as per e-auction terms and condition goverining sale of scrap material through e-auction (revised on 07.05.2026), delivery of any scrap lot shall be permitted only after receipt of full sale value of sold lot

Central Government/Public Sector

CTN :45733113

09 Jul, 2026 NA

Multi City - Uttar Pradesh

Tender For auction sale of rolling stock - steel scrap cut of condemned wagons 8 wheeler (b.g.) with out wheel set and trolly delivery on nagra siding condition wagon no.(1)ser 25079759208 boxnr (2 )er 10029660093 boxnr(3)se 25079662270 boxnr r(4)wr 25089860420 boxnr (5)se 10079661859 boxnr (6) se 25079765407 boxnr . note:- delivery on actual weighment basis. maximum permissible deliverable quantity is lot qty. 06 nos(44.240 mts) cutting allowed for easy loading returnable items will not be delivered and will be returned by the purchaser as per the lists attached at the sr. no. 18,19 and 20 in the special condition for sale attached with the auction catalogue in returnable items list centre pivot retainer will be add and sab control rod head as sab with control rod.not returnable items 1. foot step l 2. loaded tie rod 3.sets of pipe. lot qty. on approx basis weight 06 nos(44.240 mts) advice note no.- 25-03391 dt-20.03.26 and 25-03385 dt-20.03.26note- wagon lots to be sold on number basis and delivery in mts basis, purchaser should read the nagra siding condition of special condition of e- auction governing the sale and satisfy themselves before bidding.note-as per e-auction terms and condition goverining sale of scrap material through e-auction (revised on 07.05.2026), delivery of any scrap lot shall be permitted only after receipt of full sale value of sold lot

State Government

CTN :45720713

15 Jul, 2026 2.50 Lacs

Satna - Madhya Pradesh

Tender For supply of materials for carpentry industry (volume 01) - paper tape (branded/high quality) (as per sample), welding rod (branded/high quality) (gauge 8, gauge 10), nails – gauge 14, 17, 20 (branded/high quality) (1 to 4 inches), yellow clay, chalk clay (branded/high quality) (1 kg pack), plastic cane (for chair making) (branded/high quality) (as per sample), chandras (good variety/high quality), nc thinner (branded/high quality) (5-liter can), sandpaper, 4-inch (branded/high quality) (grade 80/100), turpentine oil (branded/high quality) (1 kg packet), paint (all colors) (branded/high quality) (1-liter pack), water-based paint (all colors) (branded/high quality), oil-based paint (all colors) (branded/high quality), brush (sizes 0 to 12) (branded/high quality), brush (branded/high quality) (4-inch), handsaw (16-inch) (branded/high quality), triangular file (4-inch) (branded/high quality), plywood 12 mm (branded/high quality) 4x8, plywood 18 mm (branded/high quality) 4x8, plywood 8 mm (branded/high quality) 4x8, plywood 6 mm (branded/high quality) 4x8, sunmica (1 mm) (branded/high quality) 4x8, sunmica (0.8 mm) (branded/high quality) 4x8, iron angle/iron strip (branded/high quality) – as per size, metal cutting blade (branded/high quality) 14-inch, metal cutting blade (branded/high quality) 4-inch, nuts, bolts, and washers – all sizes (branded/high quality) (as per sample), foam 3", 32 density (3x6) (branded/high quality), foam 2", 32 density (3x6) (branded/high quality), foam 1", 32 density (3x6) (branded/high quality), sofa fabric/rexine (branded/high quality), grinder disc/stone (no. 120, 140) (branded/high quality), putty (1 kg pack), wood cutter circular blade (branded/high quality) 10-inch, gi wire (branded/high quality), broom sticks (30-inch) (good/high quality) solution (sr 505) (branded/high quality) (1 kg packet), welding goggles (black/clear) (branded/high quality), measuring tape (branded/high quality), drill bit (good quality/high quality), wooden block (good quality/high quality), teak wood (good quality/high quality), acacia (babool) wood (good quality/high quality), sheesham wood (good quality/high quality), firewood (good quality/high quality), sealer (1 kg packing), wood touch-up/filler (1 kg packing), sandpaper (grit 120, 100) (good quality/high quality), electric planer (size-specific) (branded/high quality), straight edge/siknja (3 feet) (branded/high quality), bench vice (large size) (branded/high quality), hand drill machine (600 watt) (branded/high quality), compressor gun (500g, 200g) (branded/high quality), compressor hose/pipe (branded/high quality), planer machine moulding die (all sizes) (branded company / best quality)

State Government

CTN :45720726

15 Jul, 2026 3.50 Lacs

Satna - Madhya Pradesh

Tender For materials for the sewing industry (section 02) - paper tape , welding rod , nails (nos. 14, 17, 20) , yellow clay, chalk clay , plastic cane (for chair weaving) , chandras (shellac resin) , nc thinner , sandpaper (4-inch) , turpentine oil , paint (all colors) , water-based paint (all colors) , oil-based paint (all colors) , brush , brush , saw , triangular file , plywood (12 mm) , plywood (18 mm) , plywood (8 mm) , plywood (6 mm) , sunmica (1 mm) , sunmica (0.8 mm) , iron angle, iron strip , metal cutting blade , metal cutting blades , nuts, bolts, and washers (all sizes) , foam (3-inch, 32-density) , foam (2-inch, 32-density) , foam (1-inch, 32-density) , sofa fabric/rexine , grinding wheel , putty , brush cutter (circular blade) , gi wire , broom sticks , adhesive (sr 505) , welding goggles (black/clear) , measuring tape , drill bit , wooden block/batten , teak wood , acacia wood , sheesham wood , firewood , sealer , wood touch-up/finish , sandpaper , electric planer , c-clamp , bench vise , hand drill machine , compressor gun , compressor hose , planer machine molding die , sewing machine oil , nylon shirt buttons , hand sewing needles , sewing machine needles (10 pieces per packet) , sewing machine treadle/pedal , tailor's chalk , thread reels , amela machine bobbin case , sewing machine needle plate , scissors (size 08, 10) , sharpening stone , sewing machine , overlock machine , embroidery threads , embroidery frame , macramé cord (cotton, polyester, nylon, jute) , poly master , tree rope , stapler pins , white paper (80 gsm) , laser paper (green, 80 gsm) , white paper (68 gsm) , white paper (68 gsm) , ruled paper (68 gsm; ream of 1000 sheets) , ruled paper (68 gsm) , white paper (57 gsm) , brown paper (80 gsm) , card sheet (165 gsm) , cardboard sheet (no. 32) , rin/surf excel laundry soap , coating , fevicol , winding thread , winding cloth , fount solution , brown tape , screen printing ink , decoter , german sponge , reducer , winding paper , synthesizer , yellow envelope paper , stapler gun , winding paper , colored paper (70 gsm) , annual contract section , picking wall fiber , pickers , ratchet catch (leaf set) , pressing cam lever lr-101 , wooden steel (no. 29) , wheel gear 14t (no. 62) , bevel gear , worm wheel stud , ratchet catch lever , buffer soldering bracket , buffer strap (leather) , stick cap , bearing , ratchet wheel , warp weaver , worm , parachute rope , fine belt , picking stick , tariff wheel , handloom pickers , fast dyes (for fabric) , powerloom steel reed , yarn 2/40s on cone (coloured/white) , yarn 6s on coloured cone , coloured wool , yarn 2/60s on cone (coloured/white) , jute fabric , yarn 6s on cone , handloom reed (no. 12) , warping machine brake belt (leather) , dari beater/comb (wooden) , emery strip , warp frame hook set , pick/bobbin filling rod (handloom) , cast iron welding rod , temple rod/cover , weft filling needle/hook

CTN :45709038

28 Jul, 2026 25.00 Lacs

Umaria - Madhya Pradesh

Tender For inviting yearly rate for construction material for nagarpalika parishad shahdol as per nit for the year 2026-27 - inviting yearly rate for construction material for nagarpalika parishad shahdol as per nit for the year 2026-27, black soil, lime, binding wire, paver block 60mm, paver block 80 mm, paver block 100 mm, oil paint, distemper, chainlink jali, mesh jali (50mmx50mm), cement pole 06 foot m20 grade, cement pole 08 foot m20 grade, centeriing & shuttering 10 mm thick ply, vetriped tiles (60cmx60cmx10mm), glazed tiles, granite stone, mixture machine, vibrator, roller, labour, meson, ms pipe 50mm, ms pipe 65mm, ms pipe 80mm, gi corrugated sheet, gi sheet plain, green mat, fiber plain sheet reinforced fibre sheet, fiber corrugated sheet, tarpin oil, emulsion paint interior, primer, kota stone khadappa, square pipe 25mm x 25mm, rcc precast slab 60cm x 80cm x 15cm having strength m20 grade, rcc precast slab 60cm x 100cm x 15cm having strength m20 grade, rcc precast slab 100cm x 120cm x 15cm having strength m20 grade, rcc precast slab 60cm x 150cm x 15cm having strength m20 grade, plyboard 6 mm, playboard 12mm, plyboard 20mm, plyboard 30mm, glass 4mm, glass 5mm, glass 8mm, glass 10mm, welding machine, geru, gate handel, l drop tower bolt, slider frame, fevikol, touchbud polish, generator, squre pipe & complete gate made of c r sheet, brush 2 ", brush 3", brush 4", brush 6", cutting blade, welding rod, putti, ceramic tiles, barbed wire, kali panni, gaiti, favda, tasla, sabbal, grass cutter machine, tree cutting machine, emulsion paint exterior, retmar paper, screw, khilla, terakota, tirpal, green net, floor paint, premium emulsion, premium paint, p.v.c, a.c.p., acrylic led illuminating signages, wooden cutting blade chain saw, m.s. sign board - oil paint writing, s.s. steel sign board with radium writing, mosquito net, alluminium section partition and window, phasat rassi, g.i. wire``, drill machine, ghan, plyer, p.v.c. door canopy, white cement, acrylic name plate, wooden door, p.v.c. plastic door, big lawn grass cutting machine, leaf cutting kaichi, khurpi, leaf cutting baka, sprinkler machine, radium jacket, dragon torch

CTN :45720703

30 Jul, 2026 2.00 Crore

Chhatarpur - Madhya Pradesh

Tender For inviting rates of different items for construction of diffrent type of work as per demand on cm help line or ward parsad or public - supply of handpump material 2026-27, excavation for roadwork in soil with hydraulic excavator including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transporting to the embankment location with all lifts and lead up to 1000 m as per section-300 of the specifications.item no nvi-3.12, construction of embankment/sub-grade/earthen shoulders with material obtained from other sources, as per provisions of section 305 of the specifications, with approved materials/soil confirming to requirements given in table 301-1 of specifications including all lead and lifts, including cost of watering, compaction by vibratory roller/heavy pneumatic type roller etc. confirming to requirements given in table 301 2 of the specifications complete.item no nvi-3.12, construction of granular sub-base, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method at omc and compacting with vibratory roller of 80-100 kn static weight to achieve the desired density, including all lifts and lead complete in all respect as per section-400 of the specifications.by mix in place method item no nvi -4.1.1.1, construction of dry lean cement concrete sub- base over a prepared sub-grade with coarse and fine aggregate conforming to is: 383, the size of coarse aggregate not exceeding 26.5mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be as per table 600-1 of the specifications, cement content not to be less than 150 kg/cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 mpa at 7 days, mixed in a batching plant, transported to site, laid with paver with electronic sensor/mechanical paver, compacting with 8-10 tonnes vibratory roller, finishing and curing and as per section 601 of specifications.item no nvi- 6.1.1, providing and laying cement concrete grade m-20 with 20 mm graded crushed stone aggregate, mixing shall be in mechanical mixer, laying with paver compacting by use of pin, plate / screed vibrators including form work by strong steel girders fixed by spikes, separation membrane 125 micron thick, including cutting of joints @ 4 to 5 m interval and filling it with hot applied bituminous sealant (without dowel bars) (max. thickness 20 cm).item no nvi-6.4, construction of dowel jointed, plain cement concrete pavement in m-30 grade concrete over a prepared sub base with 43 or higher grade cement, coarse and fine aggregate conforming to is:383 maximum size of coarse aggregate not exceeding 25 mm, mixed in a batching and mixing plant as per approved mix design, transported to site, laid with a fixed form or slip form paver with electronic sensor spreading the concrete by shovels, rakes compacted using needle, screed and plate vibrator and finished in a continuous operation including provision of contraction, expansion, and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, placing of dowel bar, tie rod admixtures as approved, curing compound, finishing to lines and grades as per approved drawings as per irc:15 and as per section-602 of the specifications complete excluding cost of steel in dowel bar and tie rod etc.item no nvi-6.2.1, earth work in excavation for foundation, trenches for pipes / cables or drains etc. by mechanical means / manual means (exceeding 30cm in depth.) including ramming of bottom,dressing of sides,disposal of excavated earth including of all lift and lead upto 50m.disposed earth to be levelled and neatly dressed.all kinds of soil item no nii 2.6.1, demolishing cement concrete manually/by mechanical means including disposal of material with in 50 meters lead as per direction of engineer-in-charge.1:3:6 or richer mixitem no nii

CTN :45498835

02 Jul, 2026 NA

Pune - Maharashtra

Tender For bid to ras supply of oblique 2 inch long for aluminium t oblique l , aluminium t channel powder coated size 1 point 5 inch x 1 point 5 inch having thickness 1 oblique 8 inch , gi wire 4 mm thickness , gi wire 2 mm thickness , aluminum curtain rod 3 oblique 4 inch dia , aluminum curtain rod side holder 3 oblique 4 inch dia as per sample , steel curtain rod 1 inch dia as per sample , ss curtain rod side holder 1 inch dia with clamp and clamping screw and rawel plug 5 mm as per sample , plastic door with frame 0 point 75 x 2 point 1m ready made plastic door as per sample , door frame of size 1point10 x 2point10 m made of hard wood of size 10 cm x 7point5 cm thick as per sample , fly proof wire mesh steel wire dia 24 swg 15m long 4 ft width as per sample , floor door stopper small heavy duty , wooden ply cutting blade , waterproof adhesive sh marine , standard epoxy adhesive 180 gms , vinyl flooring sheet 1mm thickness , pbs roll 1 point 5 mm thick 01 mtr width 20 mtr length , oil stone 6 inch x 2 inch x 1 inch , glass cutter mechanical , tinted toilet window glass pan 6ft x 4ft x 3 mm , glass pan 6ft x 4ft x 4 mm , glass putty , looking mirror 2ft x 4ft aluminium beading as per sample , looking mirror 2ft x 1 point 5ft aluminium beading as per sample , ravel plug pvc 4mm oblique 6mm , door handle aluminium 4 inch , haxsaw blade 1 oblique 2 inch high speed 1ft long appx , haxsaw blade 1 inch high speed 1ft long appx , epoxy compound putty sealant adhesive for leakage 100 gm , suction pump for clearing blockage bathobliquetoilet 3 inch dia , cgi sheets alumunium dash zinc galvalume coating size 10ft x 3ft x 0 point 60 mm , cgi sheets alumunium dash zinc galvalume coating size 10ft x 3ft x 0 point 60 mm colour sky blue , pgi sheet 8ft x 3ft x 1mm , tower bolt aluminium 6 inch , tower bolt aluminium 8 inch , tower bolt aluminium 10 inch , door closer helical as per sample , door closer hydraulic as per sample , sliding bolt 12 inch , sliding bolt 8 inch , handle consealed 4 inch , handle folding 3 inch , plastic bush 2 inch length and thick 12 mm , ss screw 1 oblique 2 inch 500 nos , ss screw 3 oblique 4 inch 500 nos , butt hinges ss 3 oblique 4 inch x 3 oblique 4 inch x 3 inch , tower bolt 4 inch , curtain socket one side 1 inch matki , ss handle 6 inch , ss handle 4 inch , furniture pvc edge band tape 3 oblique 4 inch ivory 50 mtrs , furniture pvc edge band tape 3 oblique 4 inch wooden 50 mtrs , sand paper 120 oblique 100 , ceramic tiles 0 point 30m x 0 point 30m x 6 mm thick , ceramic non skid tiles 0 point 30m x 0 point 30m x 6 mm thick , vertified tiles 0 point 60m x 0 point 60m x 8 mm thick , vetrified tiles 0 point 30 x 0 point 30 x 6 mm thick white colour , wall tiles 0 point 45 x 0 point 30 x 8 mm thick white colour , inter locking contract block oblique medium traffic precast concrete blocks different colour , wall clading tiles 240mm x 60mm x 9mm different colour , j hook 6 inch half threaded with nut and washers 8 mm , dr fix it , ultimate woodworking adhesive sh , dha iron appx weight of 01 kg , spade appx 1 kg wt , showel with handle appx 1 kg wt , pick axe appx 2 point 50 to 3 kg wt , crow bar 5ft long , plumb bob , mason thread plastic , spirit level size 12 inch , stabila spirit level type 70 mm , mason hammer 1 kg mbt riveting hammer head , mason hammer 1 point 5 kg , mason trovel small size , mason trovel iron big size , water level pipe 8 mm dia , road delineator with solar , speed braker rubber , 3 m cat eye indicator , road sign boards sample and drawings to be collected from work section , half round file 1 point 5 inch , right angle 12 inch , screw driver set of 6 pieces , cutting wheel 4 inch dia for angle grinder , construction black safety gumboots dash //bid details 2 / 116 black size 9 , dustless chalks white 100 no per pkt , tile cutting blade , carbon bush for tile cutting machine , tile cutting machine 120mm , ms square pipe 70mm x 70mm x 2 point 6mm th 6mtr length , ms square pipe 50mm x 50mm x 2 poin

CTN :45737971

11 Jul, 2026 NA

Leh - Jammu And Kashmir

Tender For supply of combined 5 pin 15 amp , bell switch 5 amp , pvc switch and socket combine with board 15 by 16 amp , pvc switch and socket combine with board 5 by 6 amp , distilled water , combination plier , cutting plier , screw driver set , ceiling led light , 2 pole mcb 10 ampcomma 220 volt , 2 pole mcb 16 ampcomma 220 volt , 2 pole mcb 32 ampcomma 220 volt , 2 pole mcb 64 ampcomma 220 volt , 0point5 hp water pump , car air pressure pump , 16 amp switch , 16 amp socket , mcb 2 pole 20 amp , 4 into 7 pvc board gangbox , 12 into 12 pvc board gangbox , 4 into 4 pvc board gangbox , 6 amp socket , main switch 63 amp , cable 2 core roll of 91 mtr 6 sqmm aluminium , change over switch 400 amp 3 phase 4 pole , 200 amp cut off fuse , 200 amp 3 pole mcb , mcb 63 ampcomma 220 volt , cable 2 core roll of 91 mtr 10 sqmm aluminium , main switch 100 amp , xlpe three core 50 sq mm aluminium unarmoured power cable 1 point 1 kv , cable 2 core roll of 91 mtr 16 sqmm aluminium , earthing set meter tester , earthing wire single core 1point5 sq mm , line tester , bulb holder , red indicator light for electric board , cable 2 core roll of 91 mtr 2point5 sqmm , kit kat fuse box 3 pole , xlpe two core 50 sq mm aluminium unarmoured power cable 1 point 1 kv , xlpe four core 25 sq mm aluminium unarmoured power cable 1 point 1 kv , xlpe two core 25 sq mm aluminium unarmoured power cable 1 point 1 kv , xlpe two core 16 sq mm aluminium unarmoured power cable 1point1 kv , 100 amp 415 volt busbar chamber board with 100a four pole isolator protection , mccb 415 volt 3 phase 100 amp , mcb box 8 way , gi tubular pole 100 mm dia length 5 mtr thickness 4 mm with baseplate 250mm x 250mm as per is 2713 part 1 and part 3 , aluminium lug 50 mm , aluminium lug 10 mm , aluminium lug 25 mm , gi nut and bolt size m 10 length 50 mm full thread , charcoal , salt , earthing plate 2 feet into 2 feet into 8 mm , gi wire 6 mm , winding wire , cable tie lock belt 6 feet feet , main switch box 4 pole 3 phase 200 amp , exhaust fan 9 feet feet 30 watt , screw size 1 feet feet , bed switch size 6 amp 220 volt , batton holder 06 amp 220 volt , pendant holder 06 amp 220 volt , lighting conductor rod , hydrometer for specific gravity , drill machine set battery , change over switch 32 amp single phase 2 pole , kit kat fuse switch gears , extension board of 02 capacity , ampere meter , double core wire 8 sq mm , double core wire 16 sq mm , double core wire 25 sq mm , digital clamp meter , dc test lamp automatic circuit tester , multistrand electrical wire 2 sq mm pvc single core , tulu pump 1 to 1 point 5 hp , pvc gang box 4 into 2 , pvc gang box 2 into 2 5 pin socket 5 amp, switch 5 amp, 3 pin plug 15 amp, 3 pin plug 05 amp, modular switch board (4 switch, 1 socket), modular switch board (6 switch, 1 socket), modular switch board (8 switch, 2 socket), 1 switch + 1 socket smart switch board , 4 switch + 1 socket smart switch board , 6 switch + 2 socket smart switch board , 8 switch + 2 socket smart switch board , cable four core 10 sq mm , cable 2 core roll of 91 mtr 10 sqmm, cable 2 core roll of 91 mtr 6 sqmm , multistrand electrical wire 6.0 sq mm pvc single core, multistrand electrical wire 4.0 sq mm pvc single core, multistrand electrical wire 2.5 sq mm pvc single core, multistrand electrical wire 1.5 sq mm pvc single core, multistrand electrical wire 1.0 sq mm pvc single core, multistrand electrical wire 0.75 sq mm pvc single core, casing and caping 20 mm (length of 3 mtr), casing and caping 25 mm (length of 3 mtr), led bulb 20/24 watt, //bid details 2 / 94

CTN :45738001

11 Jul, 2026 NA

Leh - Jammu And Kashmir

Tender For supply of inch l , micro meter changeable anvil 0 to150 mm , measuring tape steel 3000 mm , precision file square with handle 8 inch comma 2nd cut , precision file half round with handle 8 inch comma 2nd cut , set of hand tap , chest comma tool feet j feet , gauntlets prospective welder leather , brushes steel wire 32 mm , portable welding machine , launch into 431 pr03 with hdiii car or truck , mahindra garuda ii i smart diagnostic tool , jaltest by cajoli ottw off highway equipment diagnostic tool 12v plus 24v , jaltest by cajoli cv truck comma bus comma light commercial vehicle 12v plus 24v , garuda 2vc1 professional grade comma j2534 compliant diagnostic tool for tata cv bs3 comma bs4 comma bs6 , cummins diagnostic tool inline 7 , jcb e into cavator construction diagnostic scanner electronic service tool with diagnostic , banjo washer aluminium , cotton waste , anabond red , o clamp 10 mm , emery paper rough or fine , banjo belt , banjo union , hose pipe 10 mm fle into ible , m seal , araldite big 90 gm , wd 40 rust remover , o ring set o size , valve grinding stick , valve grinding past rough or smooth , battery lead positive and negative , battery terminal h by d positive , battery terminal h by d negative , battery led pb for pole , battery thimble h by d , welding rod , flu into for gas welding , gas welding brazing rod 2 point 5 mm into 450 brass , gas welding brazing rod 2 point 5 mm into 450 aluminum , hand gloves leather , shoes for welding , welding appron leather , electeric holder heavy duty 100 ampere , welding cable copper 28 point 59 mm , stainless steel welding tong , aceteylene regulator , o into ygen regulator , torch with nozzle , supreme high pressure gas welding blow pipe , hose aceteylene gas cly , hose o into ygen gas cly , welding cutter blade size 107 into 1 point 3 into 16 mm , injector stage 3 tool kit , torque wrench , torque wrench digital small , bearing puller , mech jack chassis 10 ton , hydraulic jack chassis 10 to 15 ton , bailey plate jack 3 to 4 ton , magnet stick , ultrasonic cleaner , e-star socket and bit socket set , oil drip tray pan , pneumatic transmission oil filling tool with adaptor , heavy duty socket , vice bench heavy duty , dc test lamp digital automatic circuit tester , stanley 94 to 181 comma 150 piece high quality multi tool kit comma containing spanner comma driver sockets bits comma wrenches , vice bench small size , gauge chisel 38 mm , firmer chisel 26 mm , mortise chiesel 12 mm , combination ston , claw hammer , jack planer , pincer , planer machine , portable rotter machine , side cutting paier , circular saw blade 6 inch three square engineer scrapper with handle 100mm, chisel cold flat 25 mm x 200 mm, chisel 6", 9", hammer engineer's ballpin 400 gm, gauge thickness feeler type 0.03 to 0.5 mm, plier circlip external straight nose, plier circlip internal straight nose, spark plug socket 16 mm, spark plug socket 21 mm, hexagon socket head 0.5 inch square drive 10 mm to 32 mm, master tool kit 150 pcs , recersible rachet 0.5 inch square drive 250 mm, torque wrench 0.5 inch square drive 200 mm, allen key long ball point 10 mm, pad lock, pop spanner 6 x 22 mm, pop spanner 15 x 41 mm, nose plier 8", cutting plier 12", adjustable 12', file flat 6", 12", half round file 6", 12", round file 6", 9", 12", star screw driver 6", 9", 12", oil filter remover, torx key t30, injector remover socket 19 mmfor tata 697 bs iii & 497 bs ii, needle file set r, t & p, hammer electrician 200 gm, clamp on multi meter, digital multi meter, continuity tester, hexagon socket head size 6 mm to 42 mm, spinner handle 0.5 inch square drive, //bid details 2 / 91

Discharge Rod Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

State Government

State Government