Latest dismantle Tenders | Government dismantle Tenders

corporations/Associations/Others

CTN :41249857

19 Aug, 2025 6.70 Lacs

Navsari - Gujarat

Tender For work for dismantle of old earth wire and stringing of new earth wire for 66kv 66kv ambheta - tankal and tankal - pratapnagar line under navsari am division.

Central Government/Public Sector

CTN :41114105

04 Aug, 2025 5.06 Lacs

Sundergarh - Odisha

Tender For corrigendum : supply of installation of number plate danger plate circuit plate and phase plate - number plate for 400kv dc rourkela - talcher transmission lines , phase plate set of three r, y, b for 400kv dc rourkela - talcher transmission lines , circuit plate set of two i and ii for 400kv dc rourkela - talcher transmission lines , danger plate for 400kv dc rourkela - talcher transmission lines , fixing charges including dismantle of old plates in 400kv rourkela-talcher tl

Central Government/Public Sector

CTN :41220217

16 Aug, 2025 NA

Patiala - Punjab

Tender For certain repair to b/r and e/m items in accn of units at dhablan and barsat under ge (n) patiala - taking down cement plaster of any description, any thickness from external surfaces of walls/soffits etc. incl raking out joints, hacking for keys, scrubbibg down with water etc complete all as specified and directed by engineer-in-charge., m&l for cement plastering 15mm thick in cemet mortar 1:4 including mixing of liquid water proofing compound as per manufacturers instructions on brick work or concrete surfaces or in chajjas/parapet walls etc finished even and smooth with using extra cement complete all as specified and as directed by engineer-in-charge. note : wpc will be measured and paid separately., supply only integral water proofing compound complete all as specified & as directed by engineer-in-charge. , m&l for cement plastering 10 mm thick in cemet mortar 1:6 on brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed by engineer-in-charge., m&l for cement plastering 5mm thick in cemet mortar 1:3 as on ceilings or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed by engineer-in-charge., material & labour complete removal of existing treatment of any type/description from walls/rcc surfaces etc with mechanical means/grinder complete all as specified and directed., material & labour complete removal of existing treatment of any type/description from ceilings/rcc surfaces/soffits/ chajjas etc with mechanical means/grinder complete all as specified and directed., material & labour for preparation of plastered surfaces of walls and applying two coats of cement base paint complete all as specified and directed by engineer-in-charge., m&l for applying acrylic wall care putty on internal/external surfaces of walls/ceilings/soffits (thickness vary from 1 to 2 mm as required for desired smoothness and levelling of surfaces in one or two layers) by using ready made wall care putty including sand papering after filling the putty to make surface smooth and ready for receiving painting etc complete all as specified and directed, material & labour applying 02 coats of exterior emulsion weather proof paint (light shade) to external new plastered walls/rcc surfaces/soffits of chajjas/roof projections/ cantilevers/balcony etc surfaces over & including a coat of exterior wall primer as recommendedby manufacturer complete all as specified and directed., material & labour applying one coats of exterior emulsion weather proof paint (light shade) to external old plastered walls/rcc surfaces/soffits of chajjas/roof projections/ cantilevers/ balcony etc surface complete all as specified and directed., material & labour applying 02 coats of interior oil bound distemper (light shade) to new plastered wall surfaces complete all as specified and directed., material & labour applying one coats of oil bound distemper (light shade) to old plastered wall surfaces complete all as specified and directed., material & labour for preparation of new plastered surfaces of ceiling and applying three coats of white wash, complete all as specified and directed by engineer-in-charge., material & labour for preparation of old plastered of ceiling and applying one coats of white wash complete all as specified and directed by engineer-in-charge., material & labour for preparation of old steel surfaces of any description, over 10 cm width or girth and applying one coats of synthetic enamel paint complete all as specified, material & labour for preparation of old wood surfaces of any description, over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified, material & labour for repair to rcc sunshades, chajjas, balconies, columns, bands, beams and similar rcc work at any position/height by dismantling loose/disintegrated portion

Central Government/Public Sector

CTN :41185778

02 Aug, 2025 6.25 Lacs

Ballia - Uttar Pradesh

Tender For supply of air conditioning work at sbi chogara branch rbo4 ballia d d - supply of cassette ac, 3.0 tr single phase only bee 5- star inverter ac , supply of hi-wall split ac, 1.5 tr bee 5- star inverter ac , supply of hi-wall split ac, 1.0 tr bee 5- star inverter ac , installation of 3.0 tr cassette ac , installation of 2.0 or 1.5 or 1.0 tr hi-wall split ac , supply and installation of copper refrigerent pipes with min thickness 0.7 mm or higher for 3.0 tr cacs , supply and installation of copper refrigerent pipes with min thickness 0.7 mm or higher for 1.5 or 1.0 tr sacs , supply and installation of interconnecting wires for 3.0 tr cassette acs , supply and installation of interconnecting wires for 1.5 or 1.0 tr hi-wall split acs , supply and installation of 25 mm pvc drain pipes with insulation , supply and installation of ms angle for outdoor units , supply and installation of 4.0 kva stabliser having copper winding with voltage range of 130 - 280v , supply and installation of 5.0 kva stabliser having copper winding with voltage range of 130 - 280v , dismantle shifting and reinstallation of old existing 2.0 or 1.5 or 1.0 tr , dismantle and placement at designated place of old existing 2.0 or 1.5 or 1.0 tr hi-wall split acs

CTN :41167252

29 Jul, 2025 5.01 Lacs

Faridabad - Haryana

Tender For dismantling of cement concrete and repair and construction of drain type-i from chowk to kuwan mohallha to pond and near by area in village kheri kalan ward no. 34, faridabad.

CTN :41166601

29 Jul, 2025 7.00 Crore

Bagaha - Bihar

Tender For rrsmp/25-26 bagaha-1/03 - khabtola gulten miyake ghar se shekh karmulah ke ghar tak, clearing and grubbing road land (by manual means) including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300mm, removals of stumps of such trees cut earlier & disposal of unserviceable materials & stacking of serviceable materials to be used or auctioned upto a lead of 1000 m including removal and disposal of top organic soil not exeeding 150mm in thickness as per technical specification clause 201.1 and direction of e/i, dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including t&p and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 m as per technical specification clause 202., dismantling of existing structures, like culverts, bridge,retaining wall and other structures comprising of brick masonary including unserviceable material and stacking the serviceable material with all lift and lead of 1000m as per, construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table 300.2 with lead upto 1000 m as per technical specification clause 303.1., excavation for roadway in soil using manual means for carrying of cut earth to embankment site with a lift upto 1.5 m and lead upto 50 m as per technical specification clause 302.3, construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at omc, and compacting with smooth wheel roller to achieve the desired density, complete as per technical specification clause 401., providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kn in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 3 as per technical specification clause 405., providing and applying primer coat with bitumen emulsion (ss-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70- 1.0 kg/sqm using mechanical means as per technical specification clause 502., providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surface tretaed with primer and clened with hydriloc broom as per technical specification aclouse 503., providing and laying semi dense bituminous concrete with 100-120 tph batch type hmp producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 to 5 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per morth specification clause no. 508 complete in all respects., construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at omc, and compacting with smooth wheel roller to achieve the desired density, complete as per technical specification clause 401., providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth

CTN :41166608

29 Jul, 2025 5.68 Crore

Patna - Bihar

Tender For rrsmp-25-26 chakia-03 - dekha bandh to ajit singh ke tola tak, clearing and grubbing road land (by manual means) including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300mm, removals of stumps of such trees cut earlier & disposal of unserviceable materials & stacking of serviceable materials to be used or auctioned upto a lead of 1000 m including removal and disposal of top organic soil not exeeding 150mm in thickness as per technical specification clause 201.1 and direction of e/i, dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including t&p and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 m as per technical specification clause 202., cement cuncrete, reinforced cement concrete, dismantling of existing structures, like culverts, bridge,retaining wall and other structures comprising of brick masonary including unserviceable material and stacking the serviceable material with all lift and lead of 1000m as per (stone masonary/brick masonary), construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table 300.2 with lead upto 1000 m as per technical specification clause 303.1., construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at omc, and compacting with smooth wheel roller to achieve the desired density, complete as per technical specification clause 401., providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kn in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 3 as per technical specification clause 405., providing and applying primer coat with bitumen emulsion (ss-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70- 1.0 kg/sqm using mechanical means as per technical specification clause 502., providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surface tretaed with primer and clened with hydriloc broom as per technical specification aclouse 503., providing and laying semi dense bituminous concrete with 100-120 tph batch type hmp producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 to 5 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per morth specification clause no. 508 complete in all respects., construction of un-reinforced, plain cement concrete pavement (m35 grade) over a prepared sub base with 43 grade cement @ 400 kg per cum, coarse and fine aggregate conforming to is 383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a batching and mixing plant as per approved mix design, transported to site, laid with a fixed form paver, spread, compacted and finished in a continuous operation including provision of 0.5 x 0.5 panel, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, admixtures as approved, curing compound, finishing to lines and grades as per drawing, reinforced

CTN :41166592

29 Jul, 2025 3.57 Crore

Patna - Bihar

Tender For rrsmp/25-26 gaya/03 - construction of road chakand hospital more to hasanpur via post office under mmgsuy head in sadar gaya block, clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300mm, removals of stumps of such trees cut earlier & disposal of unserviceable materials & stacking of serviceable materials to be used or auctioned upto a lead of 1000 m including removal and disposal of top organic soil not exeeding 150mm in thickness as per technical specification clause 201.1 and direction of e/i, dismantling of cement concrete pavements as per technical specification clause 202. :- dismantling of cement concrete pavements by mechanical means using pneumatic tools breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials upto a lead of 1000 m, stacking serviceable and unserviceable materials separately, construction of subgrade and earthen shoulders :- construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table 300.2 with lead upto 1000 m as per technical specification clause 303.1., granular sub-base with well graded material (table 400.1) :- construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at omc, and compacting with smooth wheel roller to achieve the desired density, complete as per technical specification clause 401. for grading i material, wbm grading 3 :- providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 kn static roller in stages to proper grade and camber, applying and brooming, crushable screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 3 as per technical specification clause 405., panel concrete pavement (pqc) :- construction of un-reinforced, plain cement concrete pavement (m35 grade) over a prepared sub base with 43 grade cement @ 400 kg per cum, coarse and fine aggregate conforming to is 383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a batching and mixing plant as per approved mix design, transported to site, laid with a fixed form paver, spread, compacted and finished in a continuous operation including provision of 0.5 x 0.5 panel, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, admixtures as approved, curing compound, finishing to lines and grades as per drawing , reinforced cement concrete m15 grade kilometre local stone of standard design asper irc:8 fixing in position including painting and printing , etc as per drawing and technical specification clause 1703. km stone, reinforced cement concrete m15 grade kilometre local stone of standard design asper irc:8 fixing in position including painting and printing , etc as per drawing and technical specification clause 1703. 200 m stone, providing and fixing logo of project :- providing and fixing of typical mmgsuy informatory sign board with logo as per mord specifications and drawing. three ms plates of 1.6 mm thick, top and middle plate duly welded with ms flat iron 25mm x 5m size on back on edges. the lower plate will be welded with ms angle iron frame of 25mm x 25mm x 5mm. the angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 nos. 75mm x 75 mm of 12 swg sheet tubes posts duly embedded in cement concrete m-15 grade blocks of 450mm x 450mm x 600mm, 600mm below ground level. the top most diamond plate will be welded to middle plate by 47mm x 47mm of 12 swg steel plate tube. all m.s. will be stove enameled

CTN :41166624

29 Jul, 2025 5.97 Crore

Patna - Bihar

Tender For rrsmp/25-26 pakridayal/05 - dhodhra tola to reo salempur road, setting out pillars :- providing & fixing of working benchmark pillars 01 nos. per km & 04 nos. of reference pillars required for 1 km. as per drawings given and direction of e/i, clearing and grubbing road landclearing and grubbing road land ( by manual means) including uprooting wild vegetation , grass ,bushes ,shrubs , saplings and trees of girth upto 300mm , removals of stumps of such trees cut earlier & disposal of unserviceable materials & stacking of serviceable materials to be used or auctioned upto a lead of 1000 m including removal and disposal of top organic soil not exeeding 150mm in thickness as per technical specification - clause 201.1 and direction of e/i ( by manual means) in area of non-thorny jungle, cutting of trees including cutting of trunks, branches and removal of stumps cutting of trees, including cutting of trunks, branches and removal of stumps & roots, refilling, compaction of backfilling and stacking of serviceable material by manual means with all lifts as per technical specification clause 201.7, girth above 300 mm to 600 mm, girth above 600 mm to 900 mm, removal of telephone/electric poles and lines removal of telephone/electric poles with wires including excavation and dismantling of foundation concrete and lines under the supervision of concerned department, disposal with all lifts and upto a lead of 1000 m and stacking the serviceable and unserviceable material separately as per technical specification clause 202., construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table 300.2 with lead upto 1000 m & 100 m as per technical specification clause 303.1. (including royality & labour cess)., construction of un-reinforced, plain cement concrete pavement (m35 grade) over a prepared sub base with 43 grade cement @ 400 kg per cum, coarse and fine aggregate conforming to is 383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a batching and mixing plant as per approved mix design, transported to site, laid with a fixed form paver, spread, compacted and finished in a continuous operation including provision of 0.5 x 0.5 panel, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, admixtures as approved, curing compound, finishing to lines and grades as per drawing, laying brick soling layer on prepared sub-grade with brick on end edging according to lines, graded and cross-section shown on the drawing filling joints with sand and earth, spreading 25 mm thick layer of earth over brick soling, watering and rolliing the same with three wheel road roller 80-100 kn as per technical specification clause 412, traffic signs, markings & other road appurtenances, kilometre stone, reinforced cement concrete m15 grade kilometre stone/local stone of standard design as per irc:8 fixing in position including painting and printing, etc as per drawing and technical specification clause 1703, ordinary kilometer stone (precast), 200 m stone (precast), (i)providing and fixing logo of pmgsy project :-providing and fixing of typical pmgsy informatory sign board with logo as per mord specifications and drawing. three ms plates of 1.6 mm thick, top and middle plate duly welded with ms flat iron 25mm x 5m size on back on edges. the lower plate will be welded with ms angle iron frame of 25mm x 25mm x 5mm. the angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 nos. 75mm x 75 mm of 12 swg sheet tubes posts duly embedded in cement concrete m-15 grade blocks of 450mm x 450mm x 600mm, 600mm below ground level. the top most diamond plate will be welded to middle plate by 47mm x 47mm of 12 swg steel plate tube. all m.s. will be stove enameled on both sides. lettering and printing arrows, bo

CTN :41166625

29 Jul, 2025 9.76 Crore

Patna - Bihar

Tender For rrsmp/25-26 pakridayal/03 - bakhri arvind singh ke khalihan to digha pokhar, setting out pillars :- providing & fixing of working benchmark pillars 01 nos. per km & 04 nos. of reference pillars required for 1 km. as per drawings given and direction of e/i, clearing and grubbing road landclearing and grubbing road land ( by manual means) including uprooting wild vegetation , grass ,bushes ,shrubs , saplings and trees of girth upto 300mm , removals of stumps of such trees cut earlier & disposal of unserviceable materials & stacking of serviceable materials to be used or auctioned upto a lead of 1000 m including removal and disposal of top organic soil not exeeding 150mm in thickness as per technical specification - clause 201.1 and direction of e/i ( by manual means) in area of non-thorny jungle, cutting of trees including cutting of trunks, branches and removal of stumps cutting of trees, including cutting of trunks, branches and removal of stumps & roots, refilling, compaction of backfilling and stacking of serviceable material by manual means with all lifts as per technical specification clause 201.7, girth above 300 mm to 600 mm, girth above 600 mm to 900 mm, removal of telephone/electric poles and lines removal of telephone/electric poles with wires including excavation and dismantling of foundation concrete and lines under the supervision of concerned department, disposal with all lifts and upto a lead of 1000 m and stacking the serviceable and unserviceable material separately as per technical specification clause 202., construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table 300.2 with lead upto 1000 m & 100 m as per technical specification clause 303.1. (including royality & labour cess)., granular sub-base with well graded material (table 400.1) :- construction of granular sub-base by providing well graded material, spreading in uniform layers with tractor mounted grader arrangement on prepared surface, mixing by mix in place method with rotavator at omc, and compacting with smooth wheel roller to achieve the desired density, complete as per technical specification clause 401. (for grading ii material), wmm :- providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at omc in mechanical mixer (pug mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kn weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per tables 400.11 & 400.12 and technical specification clause 406., prime coat (low porosity) :- providing and applying primer coat with bitumen emulsion (ss-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70-1.0kg/sqm using mechanical means as per technical specification clause 502, tack coat:- providing and applying tack coat with bitumen emulsion (rs-1) using emulsion distributor at the rate of 0.25-0.30kg per sqm on the prepared granular surfaces treated with primer & cleaned with hydraulic broom as per technical specification clause 503., semi-dense bituminous concrete :- providing and laying semi dense bituminous concrete with 100-120 tph batch type hmp producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 to 5 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per morth specification clause no.

Dismantle Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector