Latest dismantling joint Tenders | Government dismantling joint Tenders

State Government

CTN :45723527

06 Jul, 2026 NA

Delhi - Delhi

Tender For repairing of leakage by replacement of 600 mm dia dismantling joint for pump set no 1 at mu block ht bps pitmapura

State Government

CTN :45268513

07 Jul, 2026 NA

Bankura - West Bengal

Tender For corrigendum : supply delivery and fitting fixing of gaseous chlorination items for the standby system of clear water pumping station and supply of 1 no empty chlorine tonner at ibs uporgora under chhatna, saltora block sub-surface water based piped water - supply and delivery of gaseous chlorination unit spares (0-10kg) & (0-4kg)kg/hr. require of wallace & triman evoqua, vacuum regulator (wall/cylinder mounted)with auto switchover facility, capacity 0-10 kg/hr max, evoqua make s10k scale controller, capacity 10.0kg/hr, manual control, evoqua make 1 injector suitable for 40 psi backpressure, fitting fixing of the above new supplied spares on the existing position part by part with new ejector pipe line with necessary fitting materials and necessary welding job by expert mechanical complete the job as per direction of eic and as per is:10553., supply and delivery at site of 1000 kg empty chlorine tonner hydraulic test pressure 30 kgf design as per asme section viii div.1 with hot-forged steel hook and a safety tongue piece, add: 18% gst, add: 1% cess

State Government

CTN :45268542

07 Jul, 2026 NA

Bankura - West Bengal

Tender For corrigendum : supply delivery and fitting fixing of gaseous chlorination items for the standby system of clear water pumping station and supply of 1 no empty chlorine tonner at intake kukrakuri under chhatna, saltora block sub-surface water based piped - supply and delivery of gaseous chlorination unit spares (0-10kg) & (0-4kg)kg/hr. require of wallace & triman evoqua, vacuum regulator (wall/cylinder mounted)with auto switchover facility, capacity 0-10 kg/hr max, evoqua make s10k scale controller, capacity 10.0kg/hr, manual control, evoqua make 1 injector suitable for 40 psi backpressure, fitting fixing of the above new supplied spares on the existing position part by part with new ejector pipe line with necessary fitting materials and necessary welding job by expert mechanical complete the job as per direction of eic and as per is:10553., supply and delivery at site of 1000 kg empty chlorine tonner hydraulic test pressure 30 kgf design as per asme section viii div.1 with hot-forged steel hook and a safety tongue piece, add: 18% gst, add: 1% cess

CTN :45399907

06 Jul, 2026 27.98 Lacs

Ganganagar - Rajasthan

Tender For corrigendum : supply of hydraulic spares of side arm chargers and wagon tipplers at chp, sstps, suratgarh - d.c.valve:4we6d6x/eg24n9k4 with solenoid &connecter or equivalent, d.c.valve:4we6y6x/eg24n9z4 with solenoid &connecter or, equivalent, hose pipe dko12s l=1200mm one side 90 bend, fittingstraight, connector : 12sr x ½" port connection size : g 3/8", hose pipe dko 38 sx 1000 mm, r13 with end fittings, hose pipe dko 12s x500mm,, one side 90 deg. with end, fittings, hose pipe dko 12sx 900mm,, one side 90 deg. with end, fittings, hose pipe dko 12s l=900mm, one side 90 deg. bend with,, fitting- straight connector : 25, sr x 1" port connection size, :19 dia, hose for sac :, hose pipe dko 12s l=500mm, one side 90 deg. bend with end, fittings, hyd. hose din 20022/en 853-2sn dn 40 i.d. 1.1/2'' w.p. 90, bar/1300 psi exceeds sae 100, r2 at l-6 mtr., hyd. hose sae 100 r1 at-10- i.d. - 5/8" l-6 mtr. working, pressure 350 bar/5100 psi, hyd. hose din 20022/en 853-2sn dn 20 i.d. 3/4'' w.p. 215, bar/3100 psi exceeds sae 100 r2 at l-1.6 mtr., hyd. hose din 20022/en 853-2sn dn 8 i.d. 5/16'' w.p. 350, bar/5100 psi exceeds sae 100 r2 at l-1.6 mtr., sae 100 r13-20 or eq. id 1-1/4'' with std end assy. on one, end m52x2 fs'o' ring type straight and other end with, m52x2 fs'o' ring type 90 degree swept elbow suitable, for 345 bar working pressue l-1.5 mtr., sae 100 r1a-10 or eq. id 16 mm with std end assy. on, both ends having stand pipe of 18mm od x 30 mm long, suitable for working pressure 130 bar l-1.5 mtr., sae 100 r13-12 or eq. id 19 mm with std end assy. on, one end m36x2 fs'o' ring type straight and other end, with m36x2 fs'o' ring type 90 degree swept elbow, suitable for 345 bar w.p. l-1.5 mtr, sae 100 r1a-06 or eq. id 10 mm with std end assy. on, both ends having stand pipe of 12 mm od x 30 mm long, suitable for w.p. 180 bar l-1.5 mtr, hose: din 20022/en-853-2sn dn 19 id-3/4'' (19.0 mm) w.p., 3100 psi/215 bar (21.5 mpa) sae 100 r2 at length = 1 mtr, hose: din 20022/en-853-2sn dn 19 id-3/4'' (19.0 mm) w.p., 420 bar (42 mpa) sae 100 r2 at length = 1 mtr, hose: din 20022/en-853-2sn id-5/16'' (7.9 mm) w.p. 5100, psi/350 bar (35 mpa) sae 100 r2 at length = 1 mtr, d.c. valve :4we6j 6x/e g24 n9z4 with solenoid & connector, or equivalent, check valve :z2s6-1-6x or equivalent, dbl. throttle/check vlv:z2fs 6-2-4x/2qv or equivalent, d.c. valve :4we6d 6x/e g24 n9z4 with solenoid & connector, or equivalent, filter element: 0030d010bn4hc, filter element: 0160d010bn4hc, filter element: 0330r010p, cylinder for charger uncouple 40x20x220 mm, cylinder for arm delatching 40x20x60 mm, complete seal kit consisting of piston seal, rod seal, wiper seal,, o-ring, back-up ring 140 mm dia bore x 80 mm dia piston rod x, 1400 mm stroke hydraulic cylinder(type 0627658), return line filter element type- cfr-250-12-10, manifold block: c-sk-2639-a1 or equivalent, return line filter element type- cfr-630-20-25-g, throttle cum check valve drv7-16-532-00 or equivalent, relief valve : r4v06-001-10a1 or equivalent, pilot operated check valve: c4v06-0g3-4b1 or equivalent, throttle valve dv7-16-532-00 or equivalent, dc valve part no. 4we6d or equivalent, shut off valve part no. khbg-1/4''-1-1-1-2 or equivalent, d.c. valve 4we6j with solenoid coil (double)and connector or, equivalent, pressure control pilot: mcv116g4201 or equivalent, pressure switch ips-14-100 or equivalent, shuttle valve sl06-s10 or equivalent, double throttle cum check valve zrd-05-ab-0 or equivalent, relief valve part no.r4v06-561-10a1 or equivalent, relief valve part no. r4v03-591-10a1 or equivalent, check valve part no.c4v06-560-4b1 or equivalent, shuttle valve part no. sl-06-t02-10 or equivalent, inline throttle check valve part no.drv-6 or equivalent, throttle/check valve part no.-z-2f-s6-30 or equivalent, dc valve :3d02-34-207-03-02-00a1-07-07327 or equivalent, dc valve: 3d06-35-b01-03-03-24b1-07538 or equivalent, relief valve : ng6-50 bar or equivalent, suction strainer: sc2-100 or eq

CTN :45713179

07 Jul, 2026 NA

Sundergarh - Odisha

Tender For tender for supply of sam turbo make pump spares for 60mw and 250mw - vw50 200 plus ch ratchet plate , vw50 200 plus ch brg collar , vw50 200 plus ch brg housing , vw50 200 plus ch lantern ring , vw50 200 plus ch drive sft , vw50 200 plus ch drive column pipe , vw50 200 plus ch coupling sleeve , vw50 200 plus ch bush brg star , vw50 200 plus ch line column pipe , vw50 200 plus ch line sft , vw50 200 plus ch pump column pipe , vw50 200 plus ch pump sft , vw50 200 plus ch side casing , vw50 200 plus ch impeller , vw50 200 plus ch bush brg casing cover , vw50 200 plus ch sft sleeve 63x45x190 , vw50 200 plus ch bush brg , wp 40 200 sft sleeve , wp 40 200 pump sft , wp 40 200 impeller , wp 40 200 shaft sleeve , wp 40 200 wear ring , wp 40 200 stuffing box , tch plus n40 260 stuffing box cover , tch plus n40 260 pump shaft , tch plus n40 260 impeller , tch plus n40 260 brng housing lantern , tch plus n40 260 bearing adopter , tch plus n40 260 bearing cover pump end , tch plus n40 260 deflector ring , tch plus n40 260 shaft sleeve mech seal

CTN :45707130

17 Jul, 2026 1.35 Crore

Mehsana - Gujarat

Tender For supply of jyoti make spares of vt and hscf pump for modhera, motidav and rasalpur pumping stations of modhera-dharoi pipe line project.(with buyback). - top shaft with sleeve, line shaft no.1 with sleeve, line shaft no.1 with sleeve, impiler shaft with sleeve, impiler shaft sleeve, impelier wear ring (de+nde), bering housing for thordon bearing, muff coupling, bering no-de, bering no-nde, providing spares for vt pump make: jyoti, serial n27943,n27946 & n27947, capacity: 3400 m3/hr., head - 96 m, rmp-960, l.p.m. 56667, type: 500hs style : ip419-145 with buy back sat motidav pumping station for modhera-dharoi pipeline project., top pump shaft, pump shaft sleeve, impeller wear ring ( de+nde), gunmetal bush ( rubber bush with sleeve coupling), bering no-de, bering no-nde, providing spares for vt pump make: jyoti, serial n27936,n27337, n27939 & n27940, capacity: 5100 m3/hr., head - 56 m, rmp-992, l.p.m. 85000, type: 600hs style : ip419-146 with buy back sat rasalpur pumping station for modhera-dharoi pipeline project., top pump shaft, pump shaft sleeve, impeller wear ring ( de+nde), gunmetal bush ( rubber bush with sleeve coupling), bering no-de, bering no-nde

corporations/Associations/Others

CTN :45499222

04 Jul, 2026 NA

Dhanbad - Jharkhand

Tender For corrigendum : providing of custom bid for services - loading of the areva make, 80 mva power transformer at dvc giridih ss, transportation, unloading, dismantling, joint inspection, testing, engineering at ge workshop and repairing of the same thereafter, if required

corporations/Associations/Others

CTN :45696580

08 Jul, 2026 NA

Kolkata - West Bengal

Tender For supply, delivery, installation of one number dismantling joint along with replacement of worn out spare parts, testing and commissioning of 750 mm dia. pdv and other allied works of pump unit no. 5 at cwps-ii, grww. - supply, delivery, installation, testing andcommissioning of 700 mm dia ms dismantling joints., dismantling counter weight, lever, arm, hydraulic unit etc. and all other components of the hydraulic system one by one of 750 mm dia. pump discharge valve parts by parts sequentially and cautiously as per direction of the engineer-in-charge (eic) at grww., dismantling the 750 mm dia. pdv from the existing pipe-bay, installatio/fitting-fixing of barrel-piece/flange and lifting & keeping the same on the working platform sequentially and cautiously as per diretion of the eic at grww., to and fro transportation charges of 750 mm dia. pdv from grww to workshop including loading and unloading.., dismantling all the components of 750 mm dia. pdv parts by parts sequentially and cautiously as per direction of the eic at grww/workshop., supply, delivery and fitting-fixing of drive shaft of 750 mm dia pdv sequentially and cautiously as per sample and direction of the eic at grww., supply, delivery and fitting-fixing of valve seal of 750 mm dia pdv sequentially and cautiously as per sample and direction of the eic at grww., supply, delivery and fitting-fixing of seat ring (ss 410) of 750 mm dia pdv sequentially and cautiously as per sample and direction of the eic at grww., supply, delivery and fitting-fixing of seat ring (epdm rubber) of 750 mm dia pdv sequentially and cautiously as per sample and direction of the eic at grww., supply, delivery and fitting-fixing of stub bearing bush of 750 mm dia pdv sequentially and cautiously as per sample and direction of the eic at grww., supply, delivery and fitting-fixing of drive bearing bush of 750 mm dia pdv sequentially and cautiously as per sample and direction of the eic at grww., supply, delivery and fitting-fixing of clamping ring of 750 mm dia pdv sequentially and cautiously as per sample and direction of the eic at grww., supply, delivery and fitting-fixing of end cover of 750 mm dia pdv sequentially and cautiously as per sample and direction of the eic at grww., supply, delivery and fitting-fixing of o ring of 750 mm dia pdv sequentially and cautiously as per sample and direction of the eic at grww., supply, delivery and fitting-fixing of shaft pin of 750 mm dia pdv sequentially and cautiously as per sample and direction of the eic at grww., supply, delivery and fitting-fixing of allen screw of 750 mm dia pdv sequentially and cautiously as per sample and direction of the eic at grww., supply,delivery and fitting-fixing of gland plate of 750 mm dia. pdv sequentially and cautiously as per sample and direction of the eic at grww., supply, delivery and fitting-fixing of shaft key of 750 mm dia pdv sequentially and cautiously as per sample and direction of the eic at grww., repairing the damaged portion of the hole for holding the bearing of 750 mm dia. pdv by deposting metal, boring, machining, grinding etc., all complete, as per original shape and size and direction of eic at grww.., re-aasembling all the components of 750 mm dia. pdv parts by parts sequentially and cautiously as per direction of eic at grww., performing of necessary hydro-testing of the disc and body of 750 mm dia. pdv as per direction of eic at grww., lowering from the working-bay, installation, fitting-fixing of 750 mm dia. pdv in the existing pipe-bay removing the existing barrel-piece/flanges as per direction of the eic at grww., re-assembling and re-fitting all the components of the hydraulic system like counter weight, lever, arm, hydraulic unit etc. with the existing 750 mm dia. pdv installed in the pipe-bay parts by parts sequentially and cautiously as per direction of the eic at grww., test run, operation and commissioning of the entire system of 750 mm dia. pdv as per direction of the eic at grww.

CTN :45647293

30 Jun, 2026 11.00 Lacs

Sonipat - Haryana

Tender For purchase of instrument spares. - purchase of instrument spares., control valve 4 (4440) (pnuecon valves make) only diaphagram for boiler super heater control vbalve. sr. no- 210970776, model 810/pdo 055t, size- 3 characterstic-linear travel-38mm, supply failure-close, guage vaccum-760 (1968) (micro/forbes marshell make) dial-6 bottom connection, bsp thread, s.s 316 bourdon tube., jumbo ceiling rose (6240) (electromed make) jumbo display flow monitor, input 4 to 20ma, power supply 230 vac with tps-24 vdc raqnge 0 to 9999. having previous, current and flow rate, pressure gauge assorted size (4665) (forbes marshall/micro make) range 0 to 10 kg/cm2, dial size-6 bottom connection , bsp thread, s.s casing and ss-316 bourdon tube, rpm indicator for pt (6618) (beacon make) range 0-10000, cut size- (92*92)mm, power supply-230vac, signal input-24 d.c. output-4 to 20ma, air filter regultor (5000) (festo/jenetics make) fitting size-1/4 range (0 ti 10kg/cm2) with gauge, air filter regulator (5000) (festo/jenetics make) air filter regulator & lubricator fitting size-3/8 , range (0 to 10kg/cm2) with gauge and lubricator., air filter regultor (5000) (festo/jenetics make) air filter regulator & lubricator fitting size-3/8 , range (0 to 10kg/cm2) with gauge and lubricator., p u connecter lock bolt (2051) (jenetics/festo make), p.v. tube 8mm (4974) (jenetics/festo make) pu tube-size 8mm, rubber sheet for pan disc charge valve (2876) (puri make) size of sheet- 654*490*25, seal kit complete set for 12 pan (5746) (puri make) for kit for 12 discharge valve, c.s. steam valve (4504) (leader/sant/wj make) for steam/impulse lines class-300, conector (2032) (jenetics/airmax/festo make) for pu tube -8mm and bsp thread, discoratry valve (2031) (airmax make) connection size-1/4 , draught gauge (vacuum) dial size-6 (circular type) range- 1000/0 mmwc, fitting size-1/2 (m) bsp bottom side make- baumer/micro (3389) (forbes marshall/baumer/micro make) draught gauge-dial size-6 range(0-1000 mmwc), s.s body and bourdon tube ss-316, bottom connection b.s.p, guage indecator temprature 0-100 (3485) (forbes marshall make) temperature gauge-dial-6: range (0-1500 c), s.s body and bourdon tube ss-316, bottom connection bsp stem length-300mm, guage pressure 0-40 kgs/600 lbs (1965) (forbes marshall/genernal make)dial size-6 , s.s. body and bourdon tube ss-316, bottom conection bsp, guage pressure 0-40 kgs/600 lbs (forbes marshall/genernal make) dial size-10 ss body and bourdon tube ss-316 bottom connection bsp, kit 3 (1798) ( puri make) model-complete set of pneumatic cylinder of discharge valve, kit 8 (1797) (puri make) model-complete set of pneumatic cylinder of discharge valve, level flow transmiter (5385) (honey well make) range-0 to 10000 mmwc, make-honey well, supply-24 vdc, signal input-4-20 ma connection-1/4 bsp, ms seamless pipe (3608) (leader/sant/wj make) for steam/impulse line (class-300) of transmitter, pu connector 6 mm (367) (jenetics/festo make) one side tube connection-8mm, other side thread connection of bsp, pid controller, 72*72 mm, i/p-rtd, o/p-two relay (no-nc) (5010) (honey well make) input/output-universal, cutsize-92*92, make-honey well, model-dc-1040, supply-220 ac, plc card inpur/output for boiler (3867) (allen bradley make) model-1762-if2/of2, plc card input/output for boiler (3867) (allen bradely make) model-1762-if4/of4, plc controller (6180)(allen bradely make) model-micrologix-830, make allen bradely, with modules, pneumatic positioner for control valve (4823) ( aira/ytc/rotex make) type:- rotary, model: e/p-1000r, i/p signal:- 4-20 ma, air supply:- 0-7 kg/ sqcm, standard stroke-10-80mm, air connection:- , pneumatic positioner for control valve (4823) (ytc/aira?rotex make) type:- linear, model:- e/p-1000l, i/p signal:- 4-20 ma, air supply:- 0-7 kg/sqcm, standard stroke-10-80mm, air connection:- , positiner relay (5933) pilot valve realy for aira positioned, pressure gauge 2 kg (4772) (forbes marshall/genernal make) dial size-6 , ss b

Central Government/Public Sector

CTN :45645873

30 Jun, 2026 NA

Kalyan - Maharashtra

Tender For auction sale of rolling stock - condemned electric loco no. wcam/2p no- 21865, with iron, steel along with all types of ferrous and non-ferrous materials along with waste. r/items - nil items removed for departmental use: a. smoothing reactor sl-30- (02 nos) b. ba frame -02 nos (ctf, reverser, copper busbar, l1-l6 contactor, c-145, shunting contactor, copper pipe, rs1&2. c. transformer with tap changer, radiator etc ( 01 no) d. rps (01 no) e. inhibited tfp oil. f. atfex-01 nos. g. aux machines (mph) 01 nos. h. spares of siv. i. different released relays-50 nos. j. battery charger and other electronic items-01 no. remark: 1. electric loco is sold on as is where is basis along with wheel sets and trolleys. 2. lot no is painted on the loco. 3. lot is sold on number basis. 4. approach road is available up to the lot. 5. cutting is allowed for easy loading. 6.loco is at present placed in kalyan els yard behind the old auxiliary section in the custody of sse/store/trs/els/kalyan and at the time of handing over loco will be placed on suitable cutting line at els/kalyan. 7. stock holder will be fully responsible for any addition, deletion, alteration, and variation after joint inspection report. 8. purchaser has to personally visit the site and see the lot. no claim will be entertained after sale of lot. 9. purchaser has to keep fire safety equipment/items i.e. water/sand/fire extinguisher etc. at the cutting site. 10. lots are ok for sale on above observations. note:- purchaser should ensure to clean the cutting line premises of scrap loco before final delivery. location : lying at els/kyn stock holder : sse/store/els/trs/kyn

Dismantling Joint Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

State Government

corporations/Associations/Others

corporations/Associations/Others

Central Government/Public Sector