Get complete information related to latest Display Module Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Display Module Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Display Module Tenders.
Tender For auction sale of others - condemned, unserviceable, underaged x ray baggage inspection system xbis model rap-627xr sl no. 6171121. total qty: 1 by lot. (1) on as is where basis under the custody sr.dsc/rpf/sbc as declared vide ds-08 no. 2601-06 dt 11.04.26. (2) location: at rms building near sr.dsc/office, bengaluru karnataka (3) delivery on by lot basis only. (4) dismantling/cutting: permitted to lorry loadable size. (5) road approach- lead of 50 metres. (6) only recyclers/pre-processors registered with the central pollution control board (cpcb) or state pollution control board (kspcb) possessing a valid authorization certificate are eligible to participate/bid for the lot. (7) the weight composition is purely indicative and approximate. no claims or variations in financial value will be entertained regarding variations in the actual material composition proportions. (8) purchaser must arrange for safe dismantling without causing any structural damage to the railway building, flooring, or surrounding utilities. any damage caused will be recovered from the purchaser¿s security deposit. (9) witnessing officials must physically/digitally verify that the purchaser holds a valid, unexpired license for handling hazardous electrical/electronic and heavy metal waste (cpcb/kspcb guidelines). purchaser has to remove all components associated with the lot¿including the heavy structural frames, peripheral rollers, monitors, cpus, and specifically the insulating oils- leaving the site clean. the purchaser should not be allowed to cherry-pick high-value items (like copper or lead) and leave the low-value plastic or steel shell behind. (10) custodian: /0/sr.dsc/rpf/sbc (9448319344).
Tender For auction sale of others - condemned, unserviceable, underaged x ray baggage inspection system xbis model rap-627xr sl no. 6171122 (entry/exit roller table, monitor, key board with table, lcd monitor, stabilizer) total qty: 1 by lot. (1) on as is where basis under the custody sr.dsc/rpf/sbc as declared vide ds-08 no. 2601-07 dt 11.04.26. (2) location: at platform no. 6 tk end ypr railway station, bengaluru karnataka (3) delivery on by lot basis only. (4) dismantling/cutting: permitted to lorry loadable size. (5) road approach- lead of 200 metres. (6) only recyclers/pre-processors registered with the central pollution control board (cpcb) or state pollution control board (kspcb) possessing a valid authorization certificate are eligible to participate/bid for the lot. (7) the weight composition is purely indicative and approximate. no claims or variations in financial value will be entertained regarding variations in the actual material composition proportions. (8) purchaser must arrange for safe dismantling without causing any structural damage to the railway building, flooring, or surrounding utilities. any damage caused will be recovered from the purchaser¿s security deposit. (9) witnessing officials must physically/digitally verify that the purchaser holds a valid, unexpired license for handling hazardous electrical/electronic and heavy metal waste (cpcb/kspcb guidelines). purchaser has to remove all components associated with the lot¿including the heavy structural frames, peripheral rollers, monitors, cpus, and specifically the insulating oils- leaving the site clean. the purchaser should not be allowed to cherry-pick high-value items (like copper or lead) and leave the low-value plastic or steel shell behind. (10) custodian: /o/sr.dsc/rpf/sbc (9448319344).
Tender For auction sale of depot non ferrous scrap - p.l. no. 98230025. aluminium scrap consisting of condemned and unserviceable beadings , louvre shutters, glass shutters (without glass) , pipes, plain / chequered sheets ,window grid, sheets, room partition channels and frames, coach window frame ,angle,sliding door,channel, ladders ,warning and indication board, aac ( all aluminium conductor ) , roof top blower parts , flats of sorts and sizes and similar items aluminium in nature . as is where is condition . note:- (1) manual removal of ferrous / fiber /glass/ wooden attachments permitted ( i.e. chisel cutting and hammering ) but gas cutting not permitted. (2) cssd/goc electronic weigh bridge to be used for weighment .
Tender For supplying, providing, installing and commissioning of smart real time gate position and auto pn system which includes 10.1" displaymodule with touch screen for sm unit and lc unit, interactive ui to clearly display train number and gate position on the sm unit and lc units, 4g connectivity with fallback to 3g/2g where 4g network is not present, sensors to detect the position of lc gate boom and boom locking lever, sensors capable of interchangeable and also identify if the gate is locked. sensor shall have weather proof casing, lc unit interacts with sensors continuously to detect the position of gate boom/boom-locklever and generate auto - pn only when both the conditions satisfied i.e. boom is closed condition and leveroperated for boom locking. sm unit generates auto pn when sm enters train number, up/dn details. lc unit has auto pn generated when the gate is identified as closed and boom lock lever operated, after the sm command, lc unit shall report the status of the gate whenever changed its position and status of lc gate position on sm unit shall be indicated by red icon when gate is in open condition and that is by green icon when gate is in closed condition, sm unit and lc units are connected by wireless equipment. fail safe measures are also implemented along with backup and database from where each and every operation that isrecorded between the gateman and the station master, which can be viewed. the rate is including all tools,plants, labour, transportation, manpower including cost of cloud subscription and 4g/3g data plan for 1 year at contractor's own cost inclusive of all taxes as applicable. providing track indicator, lever lock arrangement with iot, and interlocking all the above with pn exchange so as to stop unauthorised opening of ctrt and otrt gates. with 1 year maintenance against all kinds of failures physical and functional, installation and operation. warranty on hardware minimum 2 years. any other modifications and addition as per engineers instructions. the execution of works for the non interlocked lc gates under sse/pway/bdo(from sr.no. 1 to 6) and under sse/p.way/cbsa (from sr.no. 7 to 12) are furnished in annxure- a (enclosed) [ warranty period: 30 months after the date of delivery ] ]
Tender For purchase of ece department lab electronics equipments - equipments for ece, dual output regulated dc variable power supplyinput voltage : 230v/50hz acoutput voltage :(0-30)v dcoutput current :(0-2)a dcprotection circuit : over voltage, over current, and short-circuit protectionhigh efficiency : greater than 85%low ripple and noise : less than 50 mvdigital display, function (signal) generatorspecs:frequency range : 0.1hz to 5mhzdisplay :4 to 6 digit led displayoutput waveforms : sine, triangle, square, pulse, rampamplitude :0-20 vpprise time :100 nsdistortion : 1% within specified frequency rangepower supply : 230v ac 10% , 50-60 hzoutput amplifier protection : short circuit and 15voverload protectiondc offset: 0 to 10 v adjustableattenuation: 0 to -60 db, decade resistance box range : 1 to 1m rotary switch selection with 6 dialssteps : 1 , 10 , 100 , 1k , 10 k , 1m accuracy : 1%, decade capacitance box range : 100 pf to 100 frotary switch selection with 6 dialsmaximum voltage : 350vaccuracy : 1%, decade inductance box range : 10 h to 10 hrotary switch selection with 6 dialslow-loss inductorsaccuracy : 1%, sim reader trainer kitpower supply :operates on 230v ac 10%, 50hz mains supplybuilt-in regulated smps power supplyoperating dc supply : 5v/12v with overload and short-circuit protectionsim card interface :supports gsm sim cards compatible with 2g / 3g / 4g / 5g networkssim card read/write interfacesupports sim card initialization, authentication and communication functionscompatible with standard 6-pin / 8-pin sim card socketscommunication interface :usb 2.0 interface for pc communicationrs-232 serial communication interfaceuart communication facility for embedded system interfacingsim operating parameters :selectable sim clock frequencies3.579 mhz7.159 mhz14.318 mhzsim supply voltage selection facilitysim reset and activation controlsupported protocols and standards :gsm etsi 07.07 and etsi 07.05 at command supportiso/iec 7816 smart card communication supportsim communication command monitoring facilityhardware features :on-board sim card socketled indication for :power statussim detectionreset activityuser manualutility software cd / downloadable software packagedata transmission/receptionbuilt-in keypad for standalone operation.lcd displaymodule (128 64) for menu and status display.on-board microcontroller-based control section.software support:at command execution and monitoring software.sim manager utility software.data logging and communication terminal utility.pc-based gui software for sim data communication experiments.trainer features:fault simulation facility for troubleshooting experiments.simulation of faults such as:sim not detectedclock failurevcc failurereset failuremultiple on-board test points for signal observation.test points for:sim rstsim_clksim iovccuart tx/rxsuitable for cro/dso signal monitoring.glass epoxy pcb with educational block diagram layout.compact tabletop enclosed cabinet design.construction:front panel with printed block diagram.banana test points and patching facility.standard accessories:gsm sim trainer unit.usb communication cable.rs-232 communication cable.power cord., microwave test bench with reflex klystron oscillatormicrowave source :relex klystron tube with klystron mountoperating frequency in x-band (8.2ghz to 12.4ghz)electronic tuning through repeller voltage controlsuitable for cw microwave generationklystron powersupply:regulated klystron power supply unitbuilt-in modulation facilityoverload and short circuit protectionoperates on 230v ac 10%, 50hz mains supplywaveguide components:isolator variable attenuatorfrequency meterslotted line section with tunable probecrystal detector mountmatched loadmovable short / terminationwaveguide stands and accessoriesmeasurement unit:solid state vswr meter with high sensitivityswr measurement facilitysuitable for detector output monitoringtechnical specification :frequency range : 8.2 ghz to 12.4 ghzwaveguide types : wr-90detector type : crys
Tender For corrigendum : procurement for schrack seconet fdps system spares installed at ntpc unchahar - detector,fire: multisensor detector, loop card,20-1000018-01,shrack, front displaymodule,schrack-seconet, manual call point,schrack,mcp545x-3r, module,bx-oi3,schrack-seconet, module,bx-o2i4,schrack-seconet, main control unit,schrack-seconet, power supply unit,schrack-seconet, interface module,schrack-seconet, network card,schrack-seconet, mcu,20-1100007-01,shrack, front display mod,20113100101,shrack, power supply unit,schrack-seconet, comsng dongle,20-1300113-01,schrack, b8-ugk upgrade kit,20100010201,schrack
Tender For purchase of ece lab electronics equipments - equipments for ece, dual output regulated dc variable power supplyinput voltage : 230v/50hz acoutput voltage :(0-30)v dcoutput current :(0-2)a dcprotection circuit : over voltage, over current, and short-circuit protectionhigh efficiency : greater than 85%low ripple and noise : less than 50 mvdigital display, function (signal) generatorspecs:frequency range : 0.1hz to 5mhzdisplay :4 to 6 digit led displayoutput waveforms : sine, triangle, square, pulse, rampamplitude :0-20 vpprise time :100 nsdistortion : 1% within specified frequency rangepower supply : 230v ac 10% , 50-60 hzoutput amplifier protection : short circuit and 15voverload protectiondc offset: 0 to 10 v adjustableattenuation: 0 to -60 db, decade resistance box range : 1 to 1m rotary switch selection with 6 dialssteps : 1 , 10 , 100 , 1k , 10 k , 1m accuracy : 1%, decade capacitance box range : 100 pf to 100 frotary switch selection with 6 dialsmaximum voltage : 350vaccuracy : 1%, decade inductance box range : 10 h to 10 hrotary switch selection with 6 dialslow-loss inductorsaccuracy : 1%, sim reader trainer kitpower supply :operates on 230v ac 10%, 50hz mains supplybuilt-in regulated smps power supplyoperating dc supply : 5v/12v with overload and short-circuit protectionsim card interface :supports gsm sim cards compatible with 2g / 3g / 4g / 5g networkssim card read/write interfacesupports sim card initialization, authentication and communication functionscompatible with standard 6-pin / 8-pin sim card socketscommunication interface :usb 2.0 interface for pc communicationrs-232 serial communication interfaceuart communication facility for embedded system interfacingsim operating parameters :selectable sim clock frequencies3.579 mhz7.159 mhz14.318 mhzsim supply voltage selection facilitysim reset and activation controlsupported protocols and standards :gsm etsi 07.07 and etsi 07.05 at command supportiso/iec 7816 smart card communication supportsim communication command monitoring facilityhardware features :on-board sim card socketled indication for :power statussim detectionreset activityuser manualutility software cd / downloadable software packagedata transmission/receptionbuilt-in keypad for standalone operation.lcd displaymodule (128 64) for menu and status display.on-board microcontroller-based control section.software support:at command execution and monitoring software.sim manager utility software.data logging and communication terminal utility.pc-based gui software for sim data communication experiments.trainer features:fault simulation facility for troubleshooting experiments.simulation of faults such as:sim not detectedclock failurevcc failurereset failuremultiple on-board test points for signal observation.test points for:sim rstsim_clksim iovccuart tx/rxsuitable for cro/dso signal monitoring.glass epoxy pcb with educational block diagram layout.compact tabletop enclosed cabinet design.construction:front panel with printed block diagram.banana test points and patching facility.standard accessories:gsm sim trainer unit.usb communication cable.rs-232 communication cable.power cord., microwave test bench with reflex klystron oscillatormicrowave source :relex klystron tube with klystron mountoperating frequency in x-band (8.2ghz to 12.4ghz)electronic tuning through repeller voltage controlsuitable for cw microwave generationklystron powersupply:regulated klystron power supply unitbuilt-in modulation facilityoverload and short circuit protectionoperates on 230v ac 10%, 50hz mains supplywaveguide components:isolator variable attenuatorfrequency meterslotted line section with tunable probecrystal detector mountmatched loadmovable short / terminationwaveguide stands and accessoriesmeasurement unit:solid state vswr meter with high sensitivityswr measurement facilitysuitable for detector output monitoringtechnical specification :frequency range : 8.2 ghz to 12.4 ghzwaveguide types : wr-90detector type : crystal detecto
Tender For auction sale of depot miscellaneous scrap - electronic scrap comp. of monitor, ups, cpu, printer, key board and other accessories, qty-1300.00 kgs (cpcb item)